If no one has noticed. There is no big gas or oxygen bottle. And also when I did the sound test, it as almost equal to a 7.92 firing and the fire rate is at 1200 no less or no more as the micro computer is set to 1200 And is only achieved via my Vortex firing chamber and firing circuit board system that no one can achieve. In a micro system. as it independently operates the two solenoids and the ignition with all three items having there own timings and so the firing chamber pressurises with a perfect mix and fires backwards in the vortex firing chamber until the explosion pressure is forced out the exhaust. Please watch my other videos to see how I make my simulation guns
@@frazer1988A MG53 cost around a £1000 and to covert to gas firing is about £560 If you live in the UK you can get a prop gas firing MG looking gun for about £900 from a company called militarymuckabouts I do have a MG34 heavy metal up for sale for £700 which will come complete with my mobile ammo gas tin system as shown in one of my videos and to say this is a bargain as used in many of our battles and filmed with it on the move.
It depends how far one wants realism Meaning in some filming I put about a thousand empty cases around the gun and upon firing I do simulate recoil As said in other videos I do add an oil mixture to the outside of the firing chamber to give of smoke coming from the breach and also at the end of the barrel, so when not firing it smokes a little. But this is only done when close up filming .as you will not see any of these effects beyond 20 feet away.
@@iconofsin5886 I have tried that idea . But the problem is as it is gas propellant and has no projectile to give blow back. Is you loose a lot of pressure. Meaning you get less of a bang and rate of fire Unlike Airsoft. They have a mechanical blow back system But yes it would be awesome to achieve such and I'm looking into a way.
@spudnickuk in AR15 rifles, they use a "Direct Impingement" system. They have a gas block, gas tube, and gas key, which is attached to the bolt. The gas block drives the propellant at an accelerated velocity than if it were just a tube attached to the barrel. It delivers it all through the gas tube and delivers it to the gas key, which cycles the entire weapon. The gas key is actually telescoped over the gas tube in order for the action to cycle properly and efficiently. The only thing is this is that D.I. systems only function with a hole drilled into the barrel (in real guns). The MG42, however, does actually utilize a simpler operating mechanism, which is "short recoil." Im thinking you can devise a far more easier design from a short recoil pattern weapon. I have seen computer guys produce felt recoil from electronic motors, too. But fitting it into the gun would be a totally different story.
@@iconofsin5886 that is the problem .fitting anything else along side my equipment inside the gun is not achievable It needs a proper recoil system and not just a motor to make it rattle like a kids toy gun I do have some ideas though. But need to spend dedicated time to sought
Must be nice to have a section 5 But things are getting harder to obtain one and the cost for blank firing a few thousand rounds at enacting events is very costly Hence why I build stimulation guns that are just for effects and hardly any cost at about 2000 shots for about £40
Well you would have to buy a deactivated MG and make it a Gas simulation gun. You can buy a prop laser cut one from Military muckabouts for about £1000 but they will never get the fire rate with the correct loudness though As I have my own machined Vortex chamber system which compresses the gas and oxygen together Along with my unique micro firing circuit.
If clever enough on all Gas & oxygen guns as that is what these are. Their is no reason to why one can't add a laser to them, and people wear sensors. As there are already laser guns out their that the military uses with real guns. They were called Miles laser kits back in the 90s That just connected to the weapon. Anyway. All these guns that I make can be done in the same way a. as a bang occurs and activates the laser So no CHEATERS or people moaning about the Fps and close hits. So yeh. It could be a future in them. but CQB would be an issue though. Flash burns and deafening.
DID YOU BUTCHER A REAL MG42 TO CREATE A RATTLING MACHINE? please for the love of god tell me its like an mg3 or a replica or something because if not that would mean you basically killed a part of history
@@spudnickuk no, I know it can but an mg42 should stay how it was back when it was first created since its a historical weapon and also extremely rare and expensive, an mg3 is still super expensive as far as I know, but no where near as rare soo have as much fun as you'd like with that, it's kinda cool now that I know it's not an mg42 lol
You are amazing! A prop gun like this in a movie set could save a lot of budget.
Yeah, they already do this in the movies. It's not a new idea lol
need a reciprocating weight in the buffer to simulate recoil. Firing an 8mm machine gun with no recoil would make for a terrible movie prop.
@@bad74maverick1 watch any movie with guns and tell me its realistic
Save lives, too, if Alec Baldwin is around.
All the hearing damage, none of the firepower.
And 1/4 the price. Win win to me 🤷♂️
Hu?
Nah, it sets a fear into a soul
How dense are you? It's not actually firing anything. You failed those reading comprehension tests didn't you?@@BHARGAV_GAJJAR
@@deadeyeduncan5022 Better than getting an A on the sphincter test. 😅😅
If no one has noticed.
There is no big gas or oxygen bottle.
And also when I did the sound test, it as almost equal to a 7.92 firing and the fire rate is at 1200 no less or no more as the micro computer is set to 1200
And is only achieved via my Vortex firing chamber and firing circuit board system that no one can achieve.
In a micro system.
as it independently operates the two solenoids and the ignition
with all three items having there own timings
and so the firing chamber pressurises with a perfect mix
and fires backwards in the vortex firing chamber until the explosion pressure is forced out the exhaust.
Please watch my other videos to see how I make my simulation guns
How much would this cost?
@@frazer1988A MG53 cost around a £1000 and to covert to gas firing is about £560
If you live in the UK you can get a prop gas firing MG looking gun for about £900 from a company called militarymuckabouts
I do have a MG34 heavy metal up for sale for £700 which will come complete with my mobile ammo gas tin system as shown in one of my videos and to say this is a bargain as used in many of our battles and filmed with it on the move.
i never seen any shell's come out i think this was a fake.
@AtomWFfen it's a gas gun... not live ammo
@@NASPRPARTY 🤣 Get a clue dude.
Would be a nice movie prop if not for the non-existent recoil (when it's supposed to be firing a battle rifle cartridge).
It depends how far one wants realism
Meaning in some filming I put about a thousand empty cases around the gun and upon firing I do simulate recoil
As said in other videos I do add an oil mixture to the outside of the firing chamber to give of smoke coming from the breach and also at the end of the barrel, so when not firing it smokes a little.
But this is only done when close up filming .as you will not see any of these effects beyond 20 feet away.
You could implement a pneumatic buffer system to emulate recoil pulse. Something to jolt you around.
@@iconofsin5886 I have tried that idea . But the problem is as it is gas propellant and has no projectile to give blow back.
Is you loose a lot of pressure.
Meaning you get less of a bang and rate of fire
Unlike Airsoft. They have a mechanical blow back system
But yes it would be awesome to achieve such and I'm looking into a way.
@spudnickuk in AR15 rifles, they use a "Direct Impingement" system. They have a gas block, gas tube, and gas key, which is attached to the bolt. The gas block drives the propellant at an accelerated velocity than if it were just a tube attached to the barrel. It delivers it all through the gas tube and delivers it to the gas key, which cycles the entire weapon. The gas key is actually telescoped over the gas tube in order for the action to cycle properly and efficiently. The only thing is this is that D.I. systems only function with a hole drilled into the barrel (in real guns). The MG42, however, does actually utilize a simpler operating mechanism, which is "short recoil." Im thinking you can devise a far more easier design from a short recoil pattern weapon. I have seen computer guys produce felt recoil from electronic motors, too. But fitting it into the gun would be a totally different story.
@@iconofsin5886 that is the problem .fitting anything else along side my equipment inside the gun is not achievable
It needs a proper recoil system and not just a motor to make it rattle like a kids toy gun
I do have some ideas though. But need to spend dedicated time to sought
No One:
The Old school Honda Civic coming down the road at 3 AM:
But worth more lol
That would be great for tailgaters.
I LIKE the way you think....
Imagine getting pushed out of a landing craft and running onto a beach while dozens of those things are spraying lead in your direction.
Awesome m8 :-) .. That's the best yet!!
Thanks 👍
This is what i was imagining for a long time.
Dday soldiers’ asmr
Wow! Amazing. Do you mind sharing some insight how to get to fire so cleaning like that. Been having some trouble shooting with mine.
Dang bro that thing kicks more then my spud gun, kool tho 😅
me: dies of lack of recoil
Who makes this?
did this guy just fire a (simulated) mg 42 indoors without hearing projection?
Perfect for the neighbors
I need this to scare away the birds
Well your 1/2 way there ...
Marbles ball bearings or BB's ???
Fed through a hose containing high pressure oxygen ???
Cheaper compared to areal one. I would buy that one.
wow so nice
oh only if airsoft was as loud as this.... and fun looking as this
I like it!
いつも気になってるけど、撃ってる先はどうなってるの？👍️
Now all you need to add is a solenoid or something that will wiggle back and forth rrealLLLlly fast to simulate recoil
pas mal la cadence
Thank you.
Danka.
Were can I buy it??
Now all you need is a piston that simulates blowback using some of that ignited gas...
@@Enforcer_WJDE I have something in the works for recoil witch should give very strong kick back
Hello, I'm interested in one kit for MG42, how can I contact with you?
did you like edit in the gun fire?
Nothing has been edited .
I filmed it with my phone
The phone camera can't catch the high rate of fire with the sound and flash at the same time
how did you inject fresh air into for combustion? some sort of reed valve?
It is not just fresh air. I use Oxygen and butane/propane mixtures of gas
Controlled by two independent solenoid valves
real life "no recoil hack"
Do have section 5 authority
Must be nice to have a section 5
But things are getting harder to obtain one and the cost for blank firing a few thousand rounds at enacting events is very costly
Hence why I build stimulation guns that are just for effects and hardly any cost at about 2000 shots for about £40
That is awesome. Where did you get that from???
I build Simulation LPG weapons, This was made from just the shell of an mg 42 with No barrel either and had parts cut out to fit my custom parts.
Such a sad emd for such an amazing firearm
Where do I get one
How does that even work
If you see my other videos. You can see how 😁
@@spudnickuk I guess I am gonna spend the evening watching your videos.
@@thekraken1173 Have a look at this one first
ruclips.net/video/FCJwQSfTuxg/видео.html
mom can we have mg42 at home? Why we have mg 42 at home!
One can never have to many MGs
Omg it's awesome!! If you can make recoil with lpg gas blowback, it would be more perfect 👍
RIP MG42
Very nice , great way to save on ammo and still get a realistic sound , and safe for everyone , could be sold in toy stores !!! 😳😁
no itll start fires...
So where do i buy one of those ?
Well you would have to buy a deactivated MG and make it a Gas simulation gun.
You can buy a prop laser cut one from Military muckabouts for about £1000 but they will never get the fire rate with the correct loudness though
As I have my own machined Vortex chamber system which compresses the gas and oxygen together
Along with my unique micro firing circuit.
They are made
@@spudnickuk i dont have skill unfortunatly
how did you get this
I made it from an original MG42/53 shell/body
@@spudnickuk nice
The future of airsoft??
If clever enough on all Gas & oxygen guns as that is what these are.
Their is no reason to why one can't add a laser to them, and people wear sensors.
As there are already laser guns out their that the military uses with real guns.
They were called Miles laser kits back in the 90s
That just connected to the weapon.
Anyway. All these guns that I make can be done in the same way a. as a bang occurs and activates the laser
So no CHEATERS or people moaning about the Fps and close hits.
So yeh. It could be a future in them.
but CQB would be an issue though. Flash burns and deafening.
@@spudnickuk also those vr vest that stimulate pain could also work aswell because the pain could be adjusted to liking
@@lad.6459 a BDSM lover’s dream
Boss Kaban on tarkov
It needs an offset rotating motor driven weight to oscillate to simulate the recoil of a real gun.....
I understand what you mean but for the weight of the gun to move it would need a motor the size of a drill to work.
Remember to not spay and nuter your machine guns folks
That's a mashine gun!
what is her number, i know she is german
*still not CA compliant*
i dont know but it looks a little bit fake
Not bad, but the absence of 8mm brass flying all over the place, a belt flapping around and no recoil gave it away
💳💳💳💳💳💥💥💥💥💥💥💥💥
😂
DID YOU BUTCHER A REAL MG42 TO CREATE A RATTLING MACHINE? please for the love of god tell me its like an mg3 or a replica or something because if not that would mean you basically killed a part of history
Yes it is an MG3 and your right it would be so silly to butcher an original MG42 but an original MG42 can be used without any destruction though
@@spudnickuk no, I know it can but an mg42 should stay how it was back when it was first created since its a historical weapon and also extremely rare and expensive, an mg3 is still super expensive as far as I know, but no where near as rare soo have as much fun as you'd like with that, it's kinda cool now that I know it's not an mg42 lol
fake, no brass, fakey sound as well.
Where the recoil (fake) 👎
Could be why it's titled as a gas gun. You know, simulated fire?