I will want to thank again for taking out your time to detailed everything about converting of a UPS to a mini Inverter , we were able to built one through your direction here and it has been working up till date. The first one we built heated up but we were about to discover that the UPS had some circuit issue prior to our using it , so we had to provide another one and it has been working effectively up till date. Thank you for the lecture, people hardly give enough you you did Sir
Kindly like, subscribe and turn On the notification bell to be notified whenever I upload my videos. Have it at the back of your mind that someone you know; your brother, your kids, wife, husband, siblings coworkers or anyone you know that may have great need of this firsthand great unfiltered information. Going through my videos is equivalent to training yourself without any payment. Please keep On following as I would be rolling out lots of videos. Thanks for watching.
If you are brave enough.go inside where the buzzer is located. It run off dc power of 12 volts. Desolder the buzzer and replace it with a 5 to 10 ohm risistor in place of the buzzer with no sound 😊
Check to see if the UPS you used is in good other or you can actually upgrade to 1200watts or above : 1200w has two transformer of 24V connected in series
You can introduce solar panel to the system but not without a battery and a solar charge controller. The essence of solar panel is to use sunlight to charge the battery in order to replace the energy loss from the battery during the conversion from a DC to an AC current with the inverter or UPS.
Let's say I don't want to store energy in the battery first. Is it possible to draw energy directly from solar panel and connect to the UPS during a sunny day? Will it give me a current while sunshine lasts?
Simply desolder the alarm if you have the time , if you don’t use a sharp object to punch the Alarm or force a masking tape inside the hole to cover it
I will want to thank again for taking out your time to detailed everything about converting of a UPS to a mini Inverter , we were able to built one through your direction here and it has been working up till date. The first one we built heated up but we were about to discover that the UPS had some circuit issue prior to our using it , so we had to provide another one and it has been working effectively up till date.
Thank you for the lecture, people hardly give enough you you did Sir
You are welcome
Thank you so much for sharing this knowledge with us. I am definitely trying this
Sure! please proceed
Kindly like, subscribe and turn On the notification bell to be notified whenever I upload my videos.
Have it at the back of your mind that someone you know; your brother, your kids, wife, husband, siblings coworkers or anyone you know that may have great need of this firsthand great unfiltered information.
Going through my videos is equivalent to training yourself without any payment.
Please keep On following as I would be rolling out lots of videos.
Thanks for watching.
I will be glad to learn more. I am passionate about these ideas
Great to know that
thanks for sharing your information.. Blessings from
Mexico!!!
You are welcome
How to switch off the alarm?
If you are brave enough.go inside where the buzzer is located. It run off dc power of 12 volts. Desolder the buzzer and replace it with a 5 to 10 ohm risistor in place of the buzzer with no sound 😊
Some models you have to hold down one of the buttons to disable the buzzer alarm 😊
very simple and well defined
Thanks bros
Well done my brother 👍
Sir, can I use Lithium batteries in place of lead acid?
Thanks for the information so far , this is doable
You are welcome
How long can it run without charging?
Hi, how did you overcome the over heating of the transformers? Thanks in anticipation of your response
Check to see if the UPS you used is in good other or you can actually upgrade to 1200watts or above : 1200w has two transformer of 24V connected in series
Link on how to upgrade 600w to 1200w using two ups pls
No ! Not using two , use one UPS of 1200W
I have a 2200w UPS how many Watts do you reckon I can safely draw from it without causing overheating
@@pantherat2323
2200w for starting but 1200w - 1500 should be okay without any issues
Great information 👍 ... HORRIBLE MUSIC 😢
❤❤I appreciate you sir but how did you convert it from ups to inverter...n how can I use solar panels to power it???
Can you guide on how to bypass the auto shut down of the ups
Good morning Sir, I have a UPS 2000va but the power is not coming on
Ok I suggest you fix the UPS first before using it
Can one introduce Solar panel to this setup, with and without battery?
You can introduce solar panel to the system but not without a battery and a solar charge controller. The essence of solar panel is to use sunlight to charge the battery in order to replace the energy loss from the battery during the conversion from a DC to an AC current with the inverter or UPS.
I did this method, but the UPS charging capacity is weak, which leads to the battery weakening and being damaged in the future.
Let's say I don't want to store energy in the battery first. Is it possible to draw energy directly from solar panel and connect to the UPS during a sunny day? Will it give me a current while sunshine lasts?
Yes!
@@CebtechEngineering I did it today but the UPS didn't start. I used a 12v solar panel. What could be the problem
Can I send u a direct message with a picture of my set up
@@chidilamberto3353you still need a battery connected to the ups if you want to use the solar panel
You should use Charging controller with it @@chidilamberto3353
Nice one boss, it works but it doesn't last long why
How can you charge it
The UPS charges the battery once connected to source voltage and when not in use.
How do I use solar panels
You will need to do that through a charge controller; I au have to do a video on that
Very soon
I use 500wc solar panel + 40A charge controller + 2x12v-200AH batteries + APC Back-ups. Working well 24h/7days
@@dPatai71 Nice one! More of sure report please, we can do more than the above
Sun
Thank you so much. I will do it
You are welcome brother
How to switch off the alarm
Simply desolder the alarm if you have the time , if you don’t use a sharp object to punch the Alarm or force a masking tape inside the hole to cover it
How long can it last when you on it
Ok, note that the lasting of the power supply is directly depends on the capacity of the UPS ,the Battery and the load
What of, if I connect with 100Ah battery will it be stable or
Yes, it'll increase ur battery capacity
A lot of the ups requires them being hooked up to a computer In order to set them without a manual button to shut them off.
Please can it power a fridge
Not with the current illustrated UPS
Thanks
Secondly the Alarm was a problem initially but we had to use a sharp object and punch it to stop
Good job
My ups inverter power off once the battery is 10.4v but my 500w sachet inverter work till 10.0v
It could possibly be the cut off time for the PIC component embedded in the UPS
It's the way the UPS was programmed to operate. That's its cutoff voltage to prevent the battery from dieing due to excess drain.
Weldon Engr
Thanks much
Wow didn't know you could that.
Thanks so much
❤
My brother, please dont touch battery while the ups is ON, if you try it with 48v or 24v battery it will shock you
The quickest and easiest way to silent the annoying alarm is to push prestix into the hole.
Yea!
@@CebtechEngineeringbut car battery doesn't last
Efficiency 70%. Real inverter 85+%. Your choice.
Sure MOSFET differences and arrangement