Melitta caffeo bistro system blocked
HTML-код
- Опубликовано: 15 сен 2024
- Hello , I'm looking for a solution because my coffee machine has always that light of the drip tray and coffee grounds , so it's impossible to do decalcifying or cleaning programme , also to have a coffee .
I hope that somebody has a solution , I'll be thankful.
I can write and understand in French , Italian and Netherlands.
Resolved , we need in this case to change one or the 2 condesator on the mother board , 2 yageo 470uf 35v. I hope that was helpful for everybody.
Thank you for advice. I solve problem with 2 new condensator.
Thanks for the info. My Bistro bean symbols and the cup buttons are flashing. The tray is not on the screen of my Bistro like yours. So that looks ok on my machine. It is just the bean symbols and the cups buttons are flashing.
I thnik that my Melitta Cafeo bistro is stuck in celaning mode or descaling mode. Does anyone have any tips on how to get out of that mode? I tried everything. Thank you in advance!
Hi Samer, I have a Melitta Caffeo Solo that was stopped during the descaling program because of time restraints. Looks like the system is blocked by calcium now as it keeps showing air in the system and it won't pump any water liquid at all. I found a blocked black pastic elbow, cleaned that up but still the same issue. What do I have to take apart to fit it, any ideas?
Hello , can you send me a video or photos of the machine, display etc ?
@@sameradouni5094 Many thanks for the reply, however I managed to fix it. Don't know how to add pictures here, sorry.
The outlet tube of the heater (the round alu block) was blocked by dissolved calcium and gunk from running and stopping the descaling program halfway through. I was lucky to be able to clear the tube with a 2.5 mm drill bit and get it going again. I guess the leasson here is NEVER stop in the middle of a running cleaning program......Thanks again.
Me too i have same problem
I got an other problem. Trash icon still stays on. Even if i put thrash container back. weird...
Hello , you to check the motherboard, it's one or more of the capacitors, be careful before opening try to put numbers on the cables so you can put it back in the right place, changing the capacitors it's not difficult and you can find it on line .good luck.
@@sameradouni5094 thank you for info. Ive already found few topics so I took the motherboard off and see that 2 of the capacitors look like baloons :) Before I have made some photos and marked up cables properly. Thank you again.
@@boskigrzegorz you are always welcome, try to have a new capacitors with a long lifetime, also a capacitor can be damaged without that we can see it with eyes , but for this kind of problem , it's mostly 2 capacitors , I did explain which ones in another comment. Good luck.
@@sameradouni5094 its done. The icon is gone. thank you again.