I watched your 100k video, and was looking back for video's I've missed. I must say, your videography as well as your technique have come a long way since the begining. Kudos to you!
This restoration is near and dear to my heart I drove for greyhound for 5 years and used to have hotwheels greyhounds as well as other greyhound memorabilia
Black Buick ... I have a cool old black and white photograph of ad agency men sitting around a table discussing the Greyhound account with and actual greyhound lounging on the middle of the conference table. From the early 1960’s. It’s cool.
Bonjour Marty 's , toujours un grand plaisir à te voir travailler sur ces Matchbox qui renaissent après êtres passés par tes mains , encore bravo pour ton excellent boulot.
You do an amazing job on these old cars, The scary part is I had a whole lot of them (including this bus) as a kid. I was like WOW I remember that one.. lots of detail work in restoring these very cool to watch! The white ambulance in the other video was the one that I remembered best from childhood.
Thanks for commenting Iridium242, watch some of my other vids and i bet you recognise some more that you had as a kid. I am experiencing these thoughts on an almost daily basis and am lovin' it!
I had that Greyhound bus too. And several others I've seen Marty do. Just discovered your channel a couple weeks ago Marty. You do a great job and it brings back so many memories from when I was 5, 6, 7 years old.
Thanks Marty! This brought back fond memories. My Grandfather drove for Greyhound for over 20 years. Blessings to you and your family from across the pond🇺🇸👋
Brake fluid removes paint very well from plastic with out harming the plastic, have used it to strip paint from plastic models with great success, just a dab would have worked well on that wind screen, Good Luck and keep restoring .
Dot 3 brake fluid for the plastic, could try one of those mini sand blasters used for glass etching ,use walnut shell or plastic bead shot for the body
So glad to find your restoration videos. I have had my collection of matchbox toys since the early 70's, I enjoyed playing with them in my childhood and my nephews and son have enjoyed playing with them over the years. Of coarse some have had a pretty hard life but with you sharing your knowledge I hope to begin restoring them for my grandson to also enjoy the experience and joy of playing with them.
love your dedication, you could easily buy another one but you preferred to bring this back to life. well it worked and you mde a beautifull model out of it. gret vid
It’s been 50 years since I played with that toy as a child. I absolutely loved my Matchbox cars. It’s surprising to me how much detail I could remember about playing with it as I watched your restoration. Great video, thanks!!!
Dana W as a teen took me to key west Florida in one was a fun ride that was back in the late 60s when is was still safe to ride the bus for a long trip .
Matchbox cars were my favorite toys growing up. I have a large collection of them now. Thanks for showing me how to restore the rough looking ones. I've started already with good results. And greetings from Virginia, USA.
Just a suggestion on your wind screen restorations when they are cracked or pitted. After you apply your clear coat while the paint is still wet and fluid, place the part in a degassing (vacuum) chamber. The vacuum will pull air out of the cracks and pits allowing the paint to fill the voids, making them far less visible. Very fine grit sanding and a little buffing will make them look nearly new.
Thanks Pete, great to hear from people that appreciate the effort to fix these things up. As they say "You don't know what you can do until you try"! - I didn't think that those windows would ever come up like they eventually did.
I just foud out this is an actual hobby. Very impressed of how you bring some of them back. Most of the models you do I remember owning as a kid and playing with. Nice memories. Thanks for keeping those wonderful toys alive.
Hey Marty, during the late 1970's Modern Towing had the contract for the Greyhound bus company, every bus we towed away from a breakdown or accident we had to cover all the signage to keep the company's reputation intact with the public. Great resto job (*_*)
Classic, Montague St bridge! I used to live in Melbourne. Everyone has a story of this bridge. My own incident I saw was a 6 pallet curtain-sider truck. Peeled the roof off like opening a tin can.
The music in these videos is relaxing. When I was a kid I had nearly 200 hot wheels ranging from cars, trucks, tow truck, van, ambulance and so on. While i was unemployed back in 2007 to 2009 sadly sold all my toys to pay bills that and I thought I wouldn't need them anymore. Watching these videos brings my memories of my childhood back. Good job!
I said it before and I will say it again! I enjoy watching people who know what they are doing and do it like no one else! I spent my childhood collecting Matchbox, Corgi, Husky and some brands I don't remember. No video games, no smart phones or computers. Congratulations on your work! Please keep doing it, you brought back great memories!
I always use a Q-Tip when I apply transfers onto a model, it aids in application and also helps to take access water off the item. Hope that helps. The plastic windows come up very well.
Well thank you for the critic for whatever reason. Just passing on a tip that I later found out that Marty already knows about and his useful suggestions. And no I don't have a You Tube Channel and no I will not shut the f@*& up.
I don’t know how I got here, but enjoyed the restoration. I had this same Matchbox bus as a child. It was a much-beloved toy, and to this day makes its home in my mom’s basement.
Wonderful job Marty. Since I have found your channel your restorations of these old Matchbox models have got me memorized. I just sit in front the screen and watch the magic. Wonderful job on the plastic windows. I didn't think you could get all that paint off without damaging the plastic. Well I'm off to check off another addition. Have a pleasant day guy.
Hi Marty, I have this bus in my collection. Brings back memories of a bus trip that I took when I was a boy of 16 yrs. around the United States. We got to see all of the historical landmarks and National Monuments and parks. It was a 6-week tour and with the exception of hotels in NY, New Orleans, and a couple other places, we mostly were in sleeping bags at the local high school gym. During the trip, we had History teachers on board who taught us about the sites we saw and we collected points for 2 classes. Back then, I believe the trip cost around $600.00 US.
An option for refastening the plastic... instead of placing the epoxy on the interior metal, you can reassemble the windshield and body, and the apply a little dot of epoxy where the rivet heads were. The advantage is that way, if someone wanted to re-restore it in another gazillion years, it would be theoretically possible to pop off the epoxy "rivet heads" with less damage to the plastic.
Your a dumbass. The way he did it is perfect! Im sure he thought of that way as well but probably decided the epoxy showing would show restoration steps taken.
thanks for bringing back my childhood..I have had nearly every matchbox ever made when I was a young man of the late 60's...then my son when was 3 dropped what ever i had left (a LOT) down the storm drain never to be seen again :*..I had so many early ones like the coke truck, cement truck etc. and the majority of them had grey wheels..I love seeing these
Consider purchasing a small glue gun from hobbyking for future projects instead of using expensive Araldite. Also you can polish the windows back to clarity with a ladies nail polisher
I just stumbled upon some of these tiny car fix-up videos , its amazing the effort some of you people put into bringing these back to life ... they look good in the end though..
I love all of your videos, but especially enjoy the ones like this that feature models that I had as a child. I have no doubt the my Greyhound Bus looked as poor as this one at the end of my childhood, it was well played with. Thanks for the wonderful restoration, not just of the model, but of wonderful childhood memories!
If you make a silicone mold of the windshield you can make a replacement. Theres a tutorial on how to make a tail light lens replacement that looks like it would be helpful.
Marty---what really impressed me on this model restoration? Two things:( 1) varnish on the "glass" to "pop" the yellow...classic ingenuity! And (2) that you purchased that thing to begin with!!! Such creative alchemy in converting a piece ofgarbage to s miniature work of art! As we used to send in Navy messages to commend: Bravo-Zulu, amigo!
there is another model car restorer I have seen on here that taps out the rivet posts and reassembles the cars with special tiny screws made for the purpose, I can't remember who, but if you search you will find. much more professional than epoxying things, and less obvious that it has been apart.
Its so awesome to see some of you share the same love for theese clasic simple yet very well made and im pretty sure it was great to just play with them with a few buddys memories that most of you get russhing back even thngs like the store it was purchased at thats so kool its almost as of marty is kinda stepping back in time meanwhile showing the wonderful restoration while everyone is kinda going back in time and re living there great times they had with there kool lil match box cars and still enjoying the video takes you back like a time machinne now i was born in the early 80 and they dont make them like this any more those times times re are long gone and those lil treasures is all we have left to remember wen america was really america even the lil toy cars were built to last and now being restored to last a few more life times now in a shelf retired from t e 50 plus years of havinga very hard life .
A better body finish can be achieved if you apply the decals and give the body a coat of matt-protective finish before reassembling the body. If the decals have a translucent appearance you can eliminate that with a product called Solvaset from Micromark.com. Also for reattaching the plastic windows to the body, a flexible glue called E6000 is very good because it can withstand the expansion differences between the two materials. It also dries crystal clear. A product for eliminating scratches and polishing the plastic windows is called Novus.
One of my favourite Matchbox models, back in the 50's and 60's it was popular to go on a bus trip for vacation and the Concorde of the bus set was the Scienicruser. I don't have my original but I've bought a couple of really nice ones-where did you get the decal?
Hi, thanks for watching! - In this instance I obtained the required decals from this website: www.recovertoy.com/shop/index.php?cPath=51_56&sort=2a&page=4 Hope this helps.
I was watching your restoration of this old Greyhound Bus Matchbox and realized about half way thru the video .... that I have this one. Question is, where is it ? Anyhow, great job on your Matchbox restorations !
Aw Marty, another fine job. It is nice to come here and relax. I was watching Bob Ross paint for that reason very reason. I bet that's how I found you. Thank you for the video.
I remember my little brother painting one of his Matchbox cars with our older sisters fingernail polish. Big family fight ensued. She had used her first baby sitting money to buy it. 😋 Great memories! Thanks!
Marty, because you can add "music" to your soundtrack, doesn't mean that you have to do it. Please, you're not a lift or a supermarket, just talk and show will do fine.
Fantastic little video again Matty. I must have had three of these buses when I was a kid. No clue where they are now. Your bring back good memories for me.
"Brake fluid works well too" i've found DOT3 was good, but most today are DOT4, which does nothing. I've had some success with Mr Muscle Oven Cleaner Heavy Duty (but the non-caustic one isn't any good) @Rick Scherer, which Simple Green do you use? i see a few different varieties, including an industrial grade version.
I use 99% Isopropyl Alcohol from the pharmacy to strip the paint off plastic model trains. I usually let them soak in a closed container for a week or two then scrub the paint off with a tootbrush.
I don't know what would be available in Australia compared to here in US but plastic-safe paint removers are available from model railway suppliers. Scalecoat's "Wash Away" is one I've used for several decades.
If all the fluids that remove paint don't work or the plastic is too bad off you can make a simple mold and vac-u-form a new one. Vac-u-forming works great especially something that small. That was a great restoration, good job.
I watched your 100k video, and was looking back for video's I've missed. I must say, your videography as well as your technique have come a long way since the begining. Kudos to you!
Hi Marty, I absolutely love your older makeovers. The music, they way your comments flow, just fantastic
This restoration is near and dear to my heart I drove for greyhound for 5 years and used to have hotwheels greyhounds as well as other greyhound memorabilia
Black Buick ... I have a cool old black and white photograph of ad agency men sitting around a table discussing the Greyhound account with and actual greyhound lounging on the middle of the conference table. From the early 1960’s. It’s cool.
Bonjour Marty 's , toujours un grand plaisir à te voir travailler sur ces Matchbox qui renaissent après êtres passés par tes mains , encore bravo pour ton excellent boulot.
Marty, please wear foot protection along with eye and hand protection. Imagine the damage if you drop a bus wheel on your bare foot...
Greg Marchegiani 🤪
Huge improvement!! Looks practically new!!
That was 18 minutes of my life I'll never get back... and I'm ok with that. Good job! That plastic wind screen was amazing.
I was born in '62. I do believe I had that one, or possibly a later version of it. Wonderful job- as usual.
You do an amazing job on these old cars, The scary part is I had a whole lot of them (including this bus) as a kid. I was like WOW I remember that one.. lots of detail work in restoring these very cool to watch! The white ambulance in the other video was the one that I remembered best from childhood.
Thanks for commenting Iridium242, watch some of my other vids and i bet you recognise some more that you had as a kid. I am experiencing these thoughts on an almost daily basis and am lovin' it!
I had that Greyhound bus too. And several others I've seen Marty do. Just discovered your channel a couple weeks ago Marty. You do a great job and it brings back so many memories from when I was 5, 6, 7 years old.
Why is it scary?
Cool Restoration, saving the plastic and making them look new was unbelievable.
I come here to relax.
alex tworkowski word!
@E. R. Marty's voice is very calming. He explains things calmly. It's a nice break from my wife, who screams about everything. Even the weather.
@@alext9067 haha 😁
me too
Agreed!!+❤❤
Thanks Marty! This brought back fond memories. My Grandfather drove for Greyhound for over 20 years. Blessings to you and your family from across the pond🇺🇸👋
Brake fluid removes paint very well from plastic with out harming the plastic, have used it to strip paint from plastic models with great success, just a dab would have worked well on that wind screen, Good Luck and keep restoring .
I'm gonna try this next one i do 'cos so many people are saying the same thing.
If brake cleaner doesn't work purple power does as well and it wont harm clear plastic.
Joe Marco no it doesn't. Dettol works though common in model building world
Sean Fiba yeah I submerge badly painted miniatures in dettol, works great
Dot 3 brake fluid for the plastic, could try one of those mini sand blasters used for glass etching ,use walnut shell or plastic bead shot for the body
Your repair techniques, tools, and equipment have come long way on under a year, as has your documentation. Great job.
4501. This is the exact model I want to build into a livable motor home! Well Done!
That sounds difficult. How are you gonna live in a bus an inch tall?
Not much up there for ya, is there... smh
Your videos make me smile. I feel sorry for the poor things. Your restorations bring them to their glory. I'm sure they are very grateful. Well done.
Turned out great!
I know very well that; this Matchbox toy car restoration episode, has a 2018 air/release date. 📅
So glad to find your restoration videos. I have had my collection of matchbox toys since the early 70's, I enjoyed playing with them in my childhood and my nephews and son have enjoyed playing with them over the years. Of coarse some have had a pretty hard life but with you sharing your knowledge I hope to begin restoring them for my grandson to also enjoy the experience and joy of playing with them.
love your dedication, you could easily buy another one but you preferred to bring this back to life. well it worked and you mde a beautifull model out of it. gret vid
Thanks for your positive comments, 'bent andre', I will always try to buy up models that would otherwise become landfill and fix them up to keep.
It’s been 50 years since I played with that toy as a child. I absolutely loved my Matchbox cars. It’s surprising to me how much detail I could remember about playing with it as I watched your restoration. Great video, thanks!!!
The famous Scenicruiser! I wish I'd had the chance to ride in one.
Dana W as a teen took me to key west Florida in one was a fun ride that was back in the late 60s when is was still safe to ride the bus for a long trip .
Matchbox cars were my favorite toys growing up. I have a large collection of them now. Thanks for showing me how to restore the rough looking ones. I've started already with good results. And greetings from Virginia, USA.
Just a suggestion on your wind screen restorations when they are cracked or pitted. After you apply your clear coat while the paint is still wet and fluid, place the part in a degassing (vacuum) chamber. The vacuum will pull air out of the cracks and pits allowing the paint to fill the voids, making them far less visible. Very fine grit sanding and a little buffing will make them look nearly new.
Wouldn't your process also work on the plastic headlight covers on full-size vehicles? Mine are a mess.
A new life. Beautiful. I hope you put these on display when your done.
My two favorite were a Chitty chitty bangbang and a batmobile I bought at Woolworth when I was a kid. You do a great job👍.
Fernando Chavez ...I have the Corgi Toys Chitty Chitty Bang Bang. Nice toy.
This is the first "old" video I've watched. You got quite a bit better pretty quickly.
I must admit, I really thought you were on a hiding to nothing with those windows! I am very impressed sir.
Great rescue Marty, excellent work.
Thanks Pete, great to hear from people that appreciate the effort to fix these things up. As they say "You don't know what you can do until you try"! - I didn't think that those windows would ever come up like they eventually did.
It's fascinating to watch you restore these old matchbox vehicles !! You know all the tricks !!! A real craftsman !!
Nice work. I used to have one, I remember looking into the windows and wishing I could go for a ride in it.
Smurphenstein LOL!!! Me too!!!!!!
I just foud out this is an actual hobby. Very impressed of how you bring some of them back. Most of the models you do I remember owning as a kid and playing with. Nice memories. Thanks for keeping those wonderful toys alive.
Great job! I had this bus when I was a boy--it was one of my absolute favourites.
It had realistic suspension of rear wheels if you remember.
I'm sure I have a few Greyhound buses in the attic, I'll have to dig them out and restore them
I had one too. I still remember the day I got it and the store where it was purchased.
Yes I had one too. They were great.
Great job, Marty. I still have mine from 50 years ago, along with several other that could do with your TLC!!
Your techniques have come a long way in just half a year. Helpful bunch of folks out there with great tips.
Hey Marty, during the late 1970's Modern Towing had the contract for the Greyhound bus company, every bus we towed away from a breakdown or accident we had to cover all the signage to keep the company's reputation intact with the public. Great resto job (*_*)
That happened in the last 12 months with a bus running under Montegue Street Bridge, remember?
Montague St. bridge is notorious for claiming vehicles, yet it is easy to drive around the bridge, it is well signposted
Classic, Montague St bridge! I used to live in Melbourne. Everyone has a story of this bridge. My own incident I saw was a 6 pallet curtain-sider truck. Peeled the roof off like opening a tin can.
S. GRIFFIN; I am an AUTOMOTIVE HISTORIAN; but I learned something NEW from YOU!!!!!!!!
The music in these videos is relaxing. When I was a kid I had nearly 200 hot wheels ranging from cars, trucks, tow truck, van, ambulance and so on. While i was unemployed back in 2007 to 2009 sadly sold all my toys to pay bills that and I thought I wouldn't need them anymore. Watching these videos brings my memories of my childhood back. Good job!
Nicely done!
Thanks Chuck, I try my best! :)
I feel that your videos calm me, you have a soothing voice. Thanks for another great video Marty.
Great job Marty well done, oh and i love the music
I said it before and I will say it again! I enjoy watching people who know what they are doing and do it like no one else!
I spent my childhood collecting Matchbox, Corgi, Husky and some brands I don't remember. No video games, no smart phones or computers. Congratulations on your work! Please keep doing it, you brought back great memories!
I always use a Q-Tip when I apply transfers onto a model, it aids in application and also helps to take access water off the item. Hope that helps. The plastic windows come up very well.
Do you have a YT channel. If not STFU...
Well thank you for the critic for whatever reason. Just passing on a tip that I later found out that Marty already knows about and his useful suggestions. And no I don't have a You Tube Channel and no I will not shut the f@*& up.
Access water?
Patrick Simmons Well, aren't you a pleasant little son of a bitch...
It actually gives me a little joy seeing a toy in such condition. You just know that this toy was well played with and loved!
Glad I stumbled on your channel
I hope you enjoy the videos. Keep coming back, more planned!!
@@MartysMatchboxMakeovers No doubt I will. Quick question, any reason you are using brush for paint remover instead of can spray?
You’ve come a long way since then Marty!
Nice Job...Well Done.
Thankyou!
I don’t know how I got here, but enjoyed the restoration. I had this same Matchbox bus as a child. It was a much-beloved toy, and to this day makes its home in my mom’s basement.
Cracking job on those windows. Great job all round of course but those windows especially. Nice. 😀
Wonderful job Marty. Since I have found your channel your restorations of these old Matchbox models have got me memorized. I just sit in front the screen and watch the magic. Wonderful job on the plastic windows. I didn't think you could get all that paint off without damaging the plastic. Well I'm off to check off another addition. Have a pleasant day guy.
great restoration
Thankyou, I'm still learning but try my best!
Hi Marty, I have this bus in my collection. Brings back memories of a bus trip that I took when I was a boy of 16 yrs. around the United States. We got to see all of the historical landmarks and National Monuments and parks. It was a 6-week tour and with the exception of hotels in NY, New Orleans, and a couple other places, we mostly were in sleeping bags at the local high school gym. During the trip, we had History teachers on board who taught us about the sites we saw and we collected points for 2 classes. Back then, I believe the trip cost around $600.00 US.
An option for refastening the plastic... instead of placing the epoxy on the interior metal, you can reassemble the windshield and body, and the apply a little dot of epoxy where the rivet heads were. The advantage is that way, if someone wanted to re-restore it in another gazillion years, it would be theoretically possible to pop off the epoxy "rivet heads" with less damage to the plastic.
Good idea Brian! Thanks for your input!!
Your a dumbass. The way he did it is perfect! Im sure he thought of that way as well but probably decided the epoxy showing would show restoration steps taken.
*you're a dumbass
thanks for bringing back my childhood..I have had nearly every matchbox ever made when I was a young man of the late 60's...then my son when was 3 dropped what ever i had left (a LOT) down the storm drain never to be seen again :*..I had so many early ones like the coke truck, cement truck etc. and the majority of them had grey wheels..I love seeing these
i had so many of these as a kid, as well the Ford GT, Mercury wagons , Porsche 910 and Iso Grifo
I have the Iso Grifo too. 🙂👍
Had a couple of these as a kid. Did a great job bringing this one back.
Consider purchasing a small glue gun from hobbyking for future projects instead of using expensive Araldite. Also you can polish the windows back to clarity with a ladies nail polisher
I just stumbled upon some of these tiny car fix-up videos , its amazing the effort some of you people put into bringing these back to life ... they look good in the end though..
Bus does look great , Mike Espo...
I love all of your videos, but especially enjoy the ones like this that feature models that I had as a child. I have no doubt the my Greyhound Bus looked as poor as this one at the end of my childhood, it was well played with. Thanks for the wonderful restoration, not just of the model, but of wonderful childhood memories!
Is there any chance you can show all your vehicles in one video. They are so awsome buddy. I really enjoy watching your work. Thankyou
Nice job!
If you make a silicone mold of the windshield you can make a replacement. Theres a tutorial on how to make a tail light lens replacement that looks like it would be helpful.
I might look that up it sounds interesting.
Marty---what really impressed me on this model restoration? Two things:( 1) varnish on the "glass" to "pop" the yellow...classic ingenuity! And (2) that you purchased that thing to begin with!!! Such creative alchemy in converting a piece ofgarbage to s miniature work of art! As we used to send in Navy messages to commend: Bravo-Zulu, amigo!
I NEED one of these
this bus also was made with SuperFast Wheels too
Great job on cleaning up the wind screen as you call it. I didn't think it would look that good.
Just wondering Marty, how are Mrs Marty's teeth these days?
Fantastic restoration. I had one of these buses when I was a kid and your restoration brings back some great memories. Thanks for posting.
there is another model car restorer I have seen on here that taps out the rivet posts and reassembles the cars with special tiny screws made for the purpose, I can't remember who, but if you search you will find. much more professional than epoxying things, and less obvious that it has been apart.
Enjoyable to watch this restoration. The results speaks for themselves.
I had one when a child. (Now in my early fifties)
Me too! :D
You saved that Greyhound Bus, Great Job!!!
use "easy off" oven cleaner to remove the paint from windows without damaging the plastic. then buff it with rubbing compound.
Brings back so many memories. Great video. Awesome restoration
My favorite part was when the dog walked by.
Shame about the rest of the video! :(
@@MartysMatchboxMakeovers i like all VIDEO
John Scott Shut up about the damn dog
@@MartysMatchboxMakeovers lol
Its so awesome to see some of you share the same love for theese clasic simple yet very well made and im pretty sure it was great to just play with them with a few buddys memories that most of you get russhing back even thngs like the store it was purchased at thats so kool its almost as of marty is kinda stepping back in time meanwhile showing the wonderful restoration while everyone is kinda going back in time and re living there great times they had with there kool lil match box cars and still enjoying the video takes you back like a time machinne now i was born in the early 80 and they dont make them like this any more those times times re are long gone and those lil treasures is all we have left to remember wen america was really america even the lil toy cars were built to last and now being restored to last a few more life times now in a shelf retired from t e 50 plus years of havinga very hard life .
This tires have see a lot action in their life! great Job Marty!
A better body finish can be achieved if you apply the decals and give the body a coat of matt-protective finish before reassembling the body.
If the decals have a translucent appearance you can eliminate that with a product called Solvaset from Micromark.com.
Also for reattaching the plastic windows to the body, a flexible glue called E6000 is very good because it can withstand the expansion differences between the two materials. It also dries crystal clear.
A product for eliminating scratches and polishing the plastic windows is called Novus.
Fantastic info, I shall try to source these products to try out!
Came out very nice. I personally did not think it would. I love old cars too. Been collecting for about 15 years.
Nice job but you didn't say anything about wheel and axle reassembly.
YES , please show how you do the wheel reassembly , very important. Mike Espo....
@@diecast_MikeEspo mike?! Here?!
Ok...😔
@@diecast_MikeEspo , watch his other videos. You'll see how he does it.
@@diecast_MikeEspo ..
I can't believe how well the widows cleaned up! The state they were in would've been a deal breaker for me. Excellent job mate!
Thanks for your support Paul!
One of my favourite Matchbox models, back in the 50's and 60's it was popular to go on a bus trip for vacation and the Concorde of the bus set was the Scienicruser. I don't have my original but I've bought a couple of really nice ones-where did you get the decal?
Hi, thanks for watching! - In this instance I obtained the required decals from this website: www.recovertoy.com/shop/index.php?cPath=51_56&sort=2a&page=4 Hope this helps.
I got the decals from this website: www.recovertoy.com Thanks for watching!
S Findlay i have two buses like this.
Nice restoration. I had one of these Matchbox toys when I was five years old.
Muy bonito ❤ ☺ 🚃 👍🏻
I hit the like button before the video started. Wasn't disappointed! I remember the day my dad bought me one of these. 1969 . Great year.
I was watching your restoration of this old Greyhound Bus Matchbox and realized about half way thru the video .... that I have this one. Question is, where is it ? Anyhow, great job on your Matchbox restorations !
Thankyou.
MrRJDB1969-----THINGS I OWN, I KNOW , I NEVER threw-out; & CANT FIND!!!!!,
I'AM THEIR, DONE THAT, & I GOT THE "T-SHIRT"!!!!!!!!!!!!!!!
Aw Marty, another fine job. It is nice to come here and relax. I was watching Bob Ross paint for that reason very reason. I bet that's how I found you.
Thank you for the video.
I agree with the other commenters Marty- The music is distracting. I prefer to just hear your voice. Another excellent video though!
I remember my little brother painting one of his Matchbox cars with our older sisters fingernail polish. Big family fight ensued. She had used her first baby sitting money to buy it. 😋 Great memories! Thanks!
Marty, because you can add "music" to your soundtrack, doesn't mean that you have to do it. Please, you're not a lift or a supermarket, just talk and show will do fine.
You did an excellent job there. It looks fantastic.
I now have this music as my ringtone, i have instructed everyone never to call me.
Ha Ha! - You made me laugh out loud :D - The music is much quieter in newer videos.
Amazing workmanship.
Thanks Jim!
Marty music level is way to high when your not talking but if you could keep it low as if you were speaking video more enjoyable..you do great work..
Fantastic little video again Matty. I must have had three of these buses when I was a kid. No clue where they are now. Your bring back good memories for me.
Next time just soak the plastic windows in Simple Green it will eat the paint off and won't damage plastic !
I'm going to get some simple green if i can find it and try out your suggestion. Anything is better than scraping paint off with a razor blade!
"Brake fluid works well too"
i've found DOT3 was good, but most today are DOT4, which does nothing. I've had some success with Mr Muscle Oven Cleaner Heavy Duty (but the non-caustic one isn't any good)
@Rick Scherer, which Simple Green do you use? i see a few different varieties, including an industrial grade version.
I use 99% Isopropyl Alcohol from the pharmacy to strip the paint off plastic model trains. I usually let them soak in a closed container for a week or two then scrub the paint off with a tootbrush.
Careful with this, it does damage some plastics.
I don't know what would be available in Australia compared to here in US but plastic-safe paint removers are available from model railway suppliers. Scalecoat's "Wash Away" is one I've used for several decades.
Whoa! Nice piece of work! Your patience is commendable!
I have got a thisi n box mint and i restor old regular and A matchbox models
Great to hear from a fellow restorer!
Awesome job. I’m watching from San Antonio, Texas USA Loved Matchbox and Hotwheels my whole life.
Another youtuber would dissolve the paint on the windows with brake fluid.
Yeah, I thought about that but concluded it would make things worse!
Oh, no...Brake Fluid will dissolve or at least melt most plastics I thought(?)
NC Steamfan Check out Toy Polloi's channel. :-)
Dot 4 brake fluid will remove the paint without harming the plastic.
I just discovered your channel. My sons had many matchbox vehicles.I still have a lot of them. I’ve enjoyed watching you restore them.
Give them back to your children~
No music. Everything else was good mate!
If all the fluids that remove paint don't work or the plastic is too bad off you can make a simple mold and vac-u-form a new one. Vac-u-forming works great especially something that small. That was a great restoration, good job.
Music to loud. Usually it's very subtle.
Turned out lovely Marty. Thanks for sharing. Take care. From South Africa