Magura MT7 Lever Return Spring Problem
HTML-код
- Опубликовано: 8 сен 2024
- Having problem with the return spring and the lever cannot return back to its position correctly, hope this video can help you on how to fix it.
Magura MT7
#magura #magurabrakes
So much thanks for this tip 🙏🙏🙏🙏
Magura MT7 are as fragile as they are powerful...
Thanks! My loose mt8 lever has been driving me bonkers. Its amazing how common this is.
Thank you!!! I was using some tie wrap to keep it together until I saw your video. Much appreciated. Fixed my Magura MT7s.
Followed your fix. Sure was a little bit fiddly, but not really hard. Worked very well!
nice one bro 👍😄
I was able to straighten the spring out with needle nose pliers without taking everything apart. I only took the brake lever off the bars. Thank goodness. All that disassembly isn't my cup of tea.
Thanks so much, 'virtually' saved my MT8 lever. You made it look much easier than it was for me though! I found the only way I could do it was to hold the lever (between some soft wood of course) in the vice and then coax the spring into place. Be interesting if I hear back from Magura because I was convinced the spring was broken so asked if its possible to get a replacement.
Cheers again, owe you a beer!
Oh yeah bro 😄👍, at first I thought it was broken as well, but when I open up the other side (which is no problem) to compare the spring only found that it was in the same shape😂
Thank you, you made my life easier.
Thx, its work for me too. This levers are sucks btw, planning to change the other mt7 lever if this will happen again. Still fine after smash 5 times to the ground
Only video in youtube that really helps! Thank you, bro!
🤜🤛 welcome bro
This video saved me a lot of money! Thanks
Thanks.
So good too know it will work, before taking apart👍
Awesome! Thank you for sharing this fix. I thought the only way to resolve this was purchasing new lever blades... This is such a simple fix. I've been trying to figure out how to open the top cover of the master cylinder without breaking it. Have you been able to figure out how to do that?
Thank you very much! I was looking this video since weeks!
Welcome bro, I was looking for the same video too, but couldn't find one, So decide to make one my self 😄
You can also return spring without this complete rebuilt. Idealy remove BT pin and then push the spring with flat screwdriver into to place and you are done.
Thank for the suggestion bro 👌, actually this is the 2nd time the spring come out from it location, I was try to straighten the spring a little bit, hopefully it will not easily come out again after that.
@@OffRoadSyndicate i have no idea how springs looks when new. But because i broke lever i have to order new one this week so will check it out
@@motogpmoto alright bro 👌👍😄
I was driving myself nuts thinking I installed something wrong when I changed out a lever…. Then it came to me a week later today when I realized the lever I changed out was on a whole different bike than this one.. Lol. Does nobody check the springs before they leave the factory? 🤦🏽🤘🏽💛
Thx, nice video.
Thanks!
Thanks for sharing
You are welcome Robin 😄
Thanks a lot!
You are welcome 👍😉
Would you know where to source spare return springs?
What a pain, these levers flick forwards a piece of piss, then this full strip to fix? Not happy with my brand new bike I’ve not ridden yet
Yeah because of u save me buying a new lever. Thumbs up owe u 2 beer.. bike shop are crooks just mention
🤜🤛 alright bro haha😄
My spring is good but it stil can do that 😅 I don't know what to do.
i hace a Magura MTS with BAT Adjuster - Does not WORK !!!!!!!!
Happened to me on a ride lately. Seriously considering going back to Shimano. What a shit engineering.
you can use shimano levers with the magura pistons, no more shit plastic
Sorry dude cant see a thing
MT7 고질병
Man that is so complicated just for a lever…
oh yeah, Magura 👍😆
@@OffRoadSyndicate thank you for the video! Helped me fix my lever.
@@gevons 😄👍welcome bro
Tks for the video indeed very helpful. Was told by an agent to replace the whole lever but than just came across your video which is also the same as my issue also is on the left side as well.
@@avergreensyssvs5649 nice nice😄👍
Question my dear friend. I've noticed today that both levers at my Magura MT7 Pro can be extended in opposite way (outside the normal way). Will it be the same case as shown here?
Yup bro both levers can be extended in opposite way, but have to be careful not to over extended it, I was over extended the lever and the return spring was tear off....
@@OffRoadSyndicate ok, i think I have the same case here. Will give it a try :)
@@NRGPL yup bro 👍😁