Airsoft Mosfet Installation Guide
HTML-код
- Опубликовано: 20 ноя 2014
- Now that you know how to build it your gonna need to install it. This is an in depth guide for how to install it into a version 2 gearbox. Different gearboxes will be different in the details but the general method is the same.
Find me on facebook at
/ explosivereview
Find me on twitter at
/ xplosivereview Спорт
didn't realize you were Canadian until i heard "sticking oat of the buffer tube" lol
One of the best mosfet installation video you can find on youtube. Great job sir.
Well thank you!
ExplosiveReview wow since you do reply i would like to ask you a question. i got a Dboy metal gear box in my gun with no mosfet. Will it go wrong if i use 9.9v lifepo battary or it could last at least one year and a half for me? or you just suggest to installa a mosfet? sorry for bother you
Only install a mosfet if you use lipo batteries. You won't see any real benefit with the old style batteries nor do do you even raely need one. This design seems to work well with 7.4 - 11.1 lipos.
Is there a training program for gun techs like you guys or does it come from experience? The only thing i think i'm qualified to do is to swap out a spring (from a quick-change spring system) and swap out an inner barrel lol.
Good job sir.. you've earned yourself a subscriber
And you really need more credits for you video it's awesome
Well thank you very much! I appreciate every subscriber. Stay tuned for more videos real soon.
e visto videos donde colocan el cable positivo que va a la batería en la pata del mosfet que se corta.
como va eso? se puede ? o es mejor dejarla asi corta sin hacer nada?
ademas puedes mostrar como se pone un fusible pequeño? o no es necesario?
Hi After install it do we need to use the original switch anymore ?
Hey great video! Slightly off topic but what's the name of the song? It reminds me of Tragically Hip
How do you know what wire to use for an upgraded motor? No matter what I do, I can't find any specs on the motor I ordered such as the Voltage, so I'm dead in the water on this.
If it's not obvious, no, I have no idea what I'm doing so this could be an expensive venture.
Great video!
Hi, where to connect the mag positive & negative wire to the trigger switch?
Great video! One question I have is how does it stop the arc on the trigger switch?
A mosfet is basically a electronically controlled switch. It uses a lower voltage passed through the trigger contact in order to turn on a larger voltage directly to the motor. This lower voltage means no arcing.
Ok, that makes sense now. Thanks for clearing that up.
can I use electrical tape instead of heat shrink?
That was really helpful; thanks bud.
glad to hear it!
It should be a crime for manufacturers to produce AEG's without a quick change spring & at least a basic mosfet.
PLEASE HELP ME!!
i have a few questions about Mosfets;
will it be okay to remove the fuse if i install a mosfet?
is it possible to use a "plug and play" mosfet so that i can replace the "single" fire mode with a 3 round burst so that i have (safe/three round/auto) fire selection.
and if i swap out the Timia connectors for deans, install a mosfet, and remove the fuse, what kind of ROF improvement would i see?
eli dennison 1. It depends what mosfet do you get, some mosfets has a fuse in them already and some doesn't.
2. Plug & Play mosfets aren't that great. You can get GATE's mosfets cheaper than those plug & play.
3. Almost all mosfets excluding plug & play mosfets comes with deans so you have to get deans.
The installation was fun but braahhh you was standing that whole time... ill buy you a chair
What's the proper name to look on eBay for the motor connectors?
On McMaster-Carr, they're referred to as "Quick-Disconnect Terminals". The type you want are: Female, uninsulated, wire gauge 16-14, and size 0.110". (www.mcmaster.com/#69525k14/=1ds0foo)
I found these on eBay: www.ebay.com/itm/100-Non-Insulated-Quick-Disconnect-QD-Female-Terminal-16-14-Wire-AWG-110-MOLEX/361179195526
Hey man, so I've recently install a gate nanohard mosfet. It works great but every time I'm holding the trigger for 5-10 sec the gun just stop shooting. My question is how come? It's a high speed build.
Your gun might be bad buildt, the mosfet has a battery/short circut protection. It protects from short circut the gun so the mosfet automatically stops when it gets too overloaded! Sorry for my bad english, I am from Sweden!
I have the same mosfet btw
Probably because you shouldn't should down the trigger for that long wtf
we all have this Lens ;) nice vid
What's the Name of the song ?
i was maded like this. BUT, when i connect the battery, the gun fires without pull the trigger.. why?
Mario Anchieta probably has a short in the wires
song sounds like an off brand back in black lol
Fantastic!
Thanks!
While I do appreciate the video and the good information. I can't help but say that the video would be much more helpful if you actually gave close up shots of the soldering process rather than keep it in a wide angle the whole time.
With this mosfet is still necessary the anti-reversal?
〈SlabTHEkiller〉 Some mosfets doesn't need anti reversal latch but its safe to keep it in there :)
A bit late but where can I get female motor leads?
On McMaster-Carr, they're referred to as "Quick-Disconnect Terminals". The type you want are: size 0.110", wire gauge 16-14, and uninsulated.
What guns that
Watch the start of the video
I dont see it
can i send you my gun and 20$ to add the motor driver on for me
Depends where you are located. I only accept work in Canada.
o nevermind
Sawder?
Do you mean solder?
The English language is fucking stupid sometimes 😆