Dude, lubricating the inside of the bucking? Now all the people watching are gonna do that as well, which dramatically decreases the hop. You can put some oil on the outside for easier installation, but the inside stays clean and dry...
Those degrees mean the hardness of the bucking. The more degrees the harder it is thus suitable for more powerful aegs. Transparent Guarder is alright, the green G&G also never gave me any issues.
My barrel came loose when I changed my handguard so I needed to re seal it and I messed around with the hop up for like 5 months straight I’ve been playing with a bad seal. I really appreciate the video helped massively. Gonna go shoot it tomorrow and see if it finally has its range back. Edit: it does 😎
Then most likely your nub is not aligned properly where it presses on the bucking to touch the bb. Technically speaking it means there's not enough hop on the bb so multiple bbs can come out at the same time
The tech at my field said that my gun (bulldog sr-4) has a bucking problem. When I shoot like every other bb actually shoots and the ones that don’t just fall out the barrel. Does anyone know if that’s an expensive fix for a tech to do or not? Thanks
Bucking. If you can upgrade to flat hop or R hop, these are better options as they can more consistently apply hop and thus improving accuracy. A good barrel also helps but the biggest improvements to FPS/accuracy come from bucking.
I have a CyMa ak74 u brand new only shot bout 50 rounds and it skips rounds single shot and automatic. I know nothing about replacing bucking for which tech at evike suggested I put a cold weather bucking. I seen your video here on removing but not same gun do you by chance have a video on CyMa ak74 u? I’m at a total loss here after spending a lot money and this has happened. There claim is cold weather but I was outside for 5 minutes at 47 degrees is this possible?
I have noticed that the "ridge/line" on bucking is too thick and doesn't fit well onto the inner barrel. Is it a major problem or should I concider buying a different bucking?
Can anyone help I’m putting a new bucking in my cm16 raider it came with a new knob aswell should I fit the new knob or use the stock knob already in the hopup
Does anything bad happen if you don’t have a clip cause this repair guy removed mine and never put it back never noticed till I took it apart to actually see what’s it side
Dude, lubricating the inside of the bucking? Now all the people watching are gonna do that as well, which dramatically decreases the hop. You can put some oil on the outside for easier installation, but the inside stays clean and dry...
Yea watching him do that made me cringe a bit.
Those degrees mean the hardness of the bucking. The more degrees the harder it is thus suitable for more powerful aegs. Transparent Guarder is alright, the green G&G also never gave me any issues.
i dont know much and even i was like wtf
thank you, i think this is exacly my problem, my bucking was lubricated from the inside from factory and i was barely hopping up
Yeah you assume the grease is gonna touch the bb and that's a no no
My barrel came loose when I changed my handguard so I needed to re seal it and I messed around with the hop up for like 5 months straight I’ve been playing with a bad seal. I really appreciate the video helped massively. Gonna go shoot it tomorrow and see if it finally has its range back.
Edit: it does 😎
DON'T LUBRICATE INSIDE BUCKING!
Great video, thanks for not going too fast so noobs like me can understand. I know this is 6 years old but thanks. :)
Putting lubrication inside of your bucking with lead in inconsistency
If you’re watching this don’t ever lube the inside of your bucking
What about the rest of the video?
What if it shoots 2 bbs at a time after replacing the hopup unit and the bucking?
I'm not too good with buckings but could it be bad air seal?
Then most likely your nub is not aligned properly where it presses on the bucking to touch the bb. Technically speaking it means there's not enough hop on the bb so multiple bbs can come out at the same time
That fucking pin doesn't come out
The tech at my field said that my gun (bulldog sr-4) has a bucking problem. When I shoot like every other bb actually shoots and the ones that don’t just fall out the barrel. Does anyone know if that’s an expensive fix for a tech to do or not? Thanks
i have the same issue with my bulldog sr4
question: Do i need to change nub? because i am thinking about changing only the bucking is the nub essential? or it will work no problem?
"Tech" ... oh god
Very helpful. After watching this I realized that my problem was my ridges were not lined up correctly. Thanks for the video.
Should I get a bucking or a tight bore barrel for better shot to shot accuracy
Bucking. If you can upgrade to flat hop or R hop, these are better options as they can more consistently apply hop and thus improving accuracy. A good barrel also helps but the biggest improvements to FPS/accuracy come from bucking.
Seems like a helpful video but cameras too far away to see things that you're mentioning like ridges and that.
my bucking wont go into the hop up
I used old spice aluminum free high endurance deodorant as the silicone oil, seemed to work just as well as the real stuff.
Did it make the sound
I have a CyMa ak74 u brand new only shot bout 50 rounds and it skips rounds single shot and automatic.
I know nothing about replacing bucking for which tech at evike suggested I put a cold weather bucking.
I seen your video here on removing but not same gun do you by chance have a video on CyMa ak74 u?
I’m at a total loss here after spending a lot money and this has happened. There claim is cold weather but I was outside for 5 minutes at 47 degrees is this possible?
BrainExploder has a better break down to hop-up/bucking. Without lube, go check him out for correct method on changing.
Should the barrel and hop up click in when u put back as mine isn't and my hup up silver door has fallen out 😶
my front body pin doesn't disassemble
🤦🏻♂️ stupid for open the plastic with bucking!!! 😂
Boxing tomorrow Egginton vs Carlos molina wbc title
I have noticed that the "ridge/line" on bucking is too thick and doesn't fit well onto the inner barrel. Is it a major problem or should I concider buying a different bucking?
Can anyone help I’m putting a new bucking in my cm16 raider it came with a new knob aswell should I fit the new knob or use the stock knob already in the hopup
Ur choice. Try both and see which one is better
DO NOT SILICONE INSIDE
Does anything bad happen if you don’t have a clip cause this repair guy removed mine and never put it back never noticed till I took it apart to actually see what’s it side
What happened
what rifle is this? anyone have a url they can post here?
What's the music name at the begining?
Super helpful
Thank you sir for helping me putting back my jg hop rubber thanks :)
Would a multi purpose synthetic grease be fine on the bucking?
Just don't oil it at all, it's totally unneeded and just fucks your performance.
Pro-Cess
Thankkkkksksss
My hop up wont come out
did you get this figured out friend?
@@jackmimosa9006 lol yes thanks for asking
is it the same hop up and bucking ofr each M4 or i need a special for my Echo one?
nitrox3 Dreadnaugth mostly the same
Can someone explain whatbis hop up