Thank you! And yes sir, a friend of mine uses a speed trigger with this rifle. It should work just fine for you if you’d like to give it a shot! I would invest in a Jefftron Leviathan or a Perun V2 to help your rifle perform better with the speed trigger.
Nice vid do you know how sensitive amped hair tune is, you know when build a custom hpa build on there there is an option for hair tune, just curious how tuned is that one compared to yours if you know
Done this on my Upgraded Nuprol Defender, arrived at site with gun fully configured went to chrono everything went fine till I test fired after chrono and got asked to slow down on the trigger 😂😂😂
are you ever coming back to battalion? and if you know when i would love to know because i really want to get to play with you sometime. love the videos and i hope a new one can come out soon
Hey man! I'm at college in South Carolina 9-10 months out of the year, and whenever I'm home, I usually work around 70 hours per week. I do plan to play again soon though, probably in December when I come home for Christmas break. The best way to check and see when I'm gonna play is on my instagram @crazyasianairsoft If you ever see me out there, come say hi! I love meeting people who watch my videos.
your nearest field banned hpa? thats wild, the field I play at is almost even split hpa/aeg. I cant imagine thats good for business. safety first I guess
Yeah, it makes virtually no sense. The field owner’s reasoning for banning HPA was “…because everybody that uses a Polarstar is an a**hole.” He made a hasty generalization based off of the bad reputation people have given these guns from videos on the internet for clout. That’s why I’m currently selling my F2 build. It’s the best gun I’ve ever used and I’ve never seen somebody else’s gun shoot better, but I’m tired of getting stereotyped as a douche bag when I’ve done nothing to warrant that.
No you do not! Any AEG with a mosfet like the Gate Titan, Aster, Perun V2, BTC Chimera, and Spectre can utilize this mod. The installation is a bit more complicated with an AEG, but the same principle applies. But as far as any Electro-neumatic Polarstar engine, this is the proper way to do it!
@@kvantti887 Yes you can! Like I said, the installation is a bit more complicated, but once the trigger is installed, you can tune it super short similar to mine!
No sir, it’s more complicated with an AEG gearbox. There’s multiple moving components inside an AEG, and you will often be working with optical mosfets, rather than a physical trigger button/switch found on a HPA trigger board.
@@CrazyAsianAirsoft I got it working thank you! I’m just stuck on how to put the g2 gearbox back in the lower part if the sr30. Im going to battle cat this weekend, ill see if they will help me with it if i cant get it.
@@hakeemh7977 cool! If you’re having trouble fitting the gearbox back in, it’s likely the opening for the trigger is now too small for the speed trigger to fit through, meaning it’ll need to be dremmeled/sanded out for it to fit. This is an easy process and shouldn’t take long. Best of luck!
Mine does the same. The vibrations of usage causes the screws to work themselves loose over time. The fix for this is to drip a drop of blue loctite onto the screws, then retune your trigger.
@@Airsoft-556 anywhere you buy the gun from. The majority of entry level (and higher) M4 aeg come with some form of a micro switch mosfet. Including but not limited to: Krytac Trident CRB, Matrix S&T Sportline, Lancer Tactical, VFC Avalon, etc.
That's normal! The trigger being tuned backward makes it so the safety cannot fully engage. However, you can file down the safety lever to work with this trigger if you so choose.
@@rileykesler6471 not quite, but you’re on the right track. You’ll need a V2 trigger in order for it to fit in any V2 gearbox, you can compare these easily on Amped Airsoft’s website.
You have to fully disassemble the gun by removing the pins and screws and taking apart the body. The gearbox will be inside where you can begin the mod.
The Mp5k has a V3 gearbox, while the one I use in this video is a V2. There are certainly ways to shorten the trigger pull on a V3, however I haven’t had personal experience with that yet.
This mod is for HPA engines that specifically use a physical (non optical) trigger board switch. This trigger also works on most aeg’s but there can also be additional work needed to achieve the same results.
No sir those do not exist. You also don't need a Titan Advanced. Perun, Jefftron, BTC, Gate, T238, and several other mosfets will all work with this mod. Perun makes some much cheaper fets, and Gate also makes a Basic Module that's only $80.
This trigger will work in almost any aeg, but the mod doesn’t usually work on an aeg because most mosfets are optical, and the trigger has nothing to bounce off of. The Polarstar trigger board has a clicky button on it for the trigger to bounce off of, unlike most aeg mosfets. To be safe, if you want to do this mod on an aeg, simply cut a few coils off of a ball-point pen spring, and use that for the trigger to bounce off of. This will still give you an extremely light trigger pull, but it will ensure that it bounces back to the forward position properly.
Unfortunately no, speed triggers don’t fit in the G3 gearbox shells without dremel work, but you can shorten the trigger pull on the stock trigger using heat shrink. I show how to do that in my life stream videos that I posted on my channel!
The small one to tune the trigger is the .14mm I believe. As far as the gearbox screws go, most of them will need a simple Philips head to remove them, not a star bit like mine.
Yes sir that one can! Sorry for the late reply. As far as I am aware, the SpeedQB versions of those rifles come preinstalled with a SPEED or MAXX trigger.
If you don’t use at least a small pen spring with this trigger on an aeg, the mod won’t work. The trigger needs to have something to bounce it back to the forward position.
I believe so, however some additional modification might be needed. I haven’t had a ton of experience with the N7 yet. I do know that you can easily shorten the trigger pull on a regular V2 trigger for those. (Video on that mod coming soon)
Yes sir they’re metal, and they aren’t difficult per se, but they do require patience to file down to get that perfect balance between a functioning safety, and a hair trigger.
Yes you will. Any aeg without a mosfet will not be able to work with this mod. They use as standard trigger trolly that will lock up or double fire with this mod. You will need a mosfet of some kind.
@CrazyAsianAirsoft ok then thank I'm write that down I just got into airsoft and I be trying to find people with great upgrade knowledge cause I got want to upgrade it
Of course! It’s different with AEG’s, as you’ll want a mosfet with a physical button microswitch for the trigger to bounce off of if you want to go without a spring.
@@CrazyAsianAirsoft So I just dropped a Polarstar Jack in, and I usually notice after a while the trigger doesn't hold the same "hair trigger" non movement, and i was wondering if it was because of the spring so i considered removing it and trying it after seeing your video
The spring has to do with that, but also the screws in the trigger itself will be loosened over time from movement and vibration of the gun. I suggest using some blue loctite to hold the screws in the position to which you tune them. And lose the spring, then let your fingers fly!
@@CrazyAsianAirsoft I just got the blue loctite in and I'm letting it sit and I still have the spring but maybe I'll give it a try without once it dries out tomorrow!
Yes but it’s far more complicated. You’ll need to add solder, or some other physical stopper at the front and back points of the trigger to eliminate the play.
This will work with Maxx and SPEED Airsoft triggers. As far as gearboxes, some may require a little dremel work, but most V2 gearbox shells should work.
Yo bro I’m kinda late so you might not see this, but my trigger doesn’t reset with the spring, is there a way you can tell me how to install without it ?
Hey man! What system are you trying to do this mod with? Is it in AEG? Or is it a HPA system? If it’s HPA, what engine? If it’s an AEG, most MOSFETs don’t have a physical button that can push the trigger back to its reset position on its own, So that could be a problem. If you are using an HPA system, your trigger board microswitch, might not have enough spring tension in it to push the trigger back into place after each shot.
With an AEG, you need the spring. Almost every mosfet on the market now is optical, and doesn't have a physical microswitch for the trigger to bounce off of. Therefore, you will need a spring. But you can cut a coil or two off of the spring before installation to make the pull lighter.
No sir, the trigger has holes that come pre-bored into it. There are set screws that can be loosened or tightened with a small Allen key. The spring isnt needed in order to tune this.
What engine are you running? Jacks run into that problem a lot, but sometimes you gotta tune it short, and just hit the trigger harder to avoid double firing. Depends on the engine.
For some reason, despite using the same trigger board, the Jack/F1 (Single Solenoid) engines seem to double fire more when attempting this mod. If you can't get rid of it, you could invest in a black leaf trigger board. The button is a bit harder to hit on this board, but it has a nice clicky feel like on the Fusion Engine.
@@jakub-games1899 you can only do this mod to a gun that has some sort of microswitch that the trigger can touch. For instance, you can do this mod to a Matrix S&T, or a G&G ARP-9, but not a Krytac CRB.
@@CrazyAsianAirsoft igjt bc I’ve had my f2 for a year and my buddies say the spring is needed to set back the trigger bc the micro switch isn’t stronger enough to send it back
@@justinhunting803 Then he hits the trigger too hard or the trigger is tuned too tightly. My friends and I have never had issues with not using a spring. Although if you prefer to just cut a few coils off, that’s fine too.
Does the trigger still lock if you put on the safety ?
It does not, however all you have to do is finely sand down your safety lever until it can activate but still have the hair trigger mod.
@@CrazyAsianAirsoftdo you have a tutorial 4 that
You crushed this tutorial bro! And the editing was really good! Looking forward to seeing more videos!
Thanks Cole! I worked hard on it!!
Yo the pen spring idea is actually 500 iq lol. I have use a nozzle return spring for a gp9 which is wider than a hicapa one so it fits on the screw.
Yeah bro it works like a charm I swear by it. Glad this video seemed to help!
What the trigger name?
Nice in depth tutorial🔥
Something different for me!
Hey man I know its really late but is there any chance you can do a comparison for trigger with spring vs withought spring thanks!! Also great video
Hey dawg! If I get a chance to do it over Christmas break, I’ll throw a video together about it!
SUPER informational video! Just wondering if this would work on a LT-15 GEN 2 M4? Thanks!!
Thank you! And yes sir, a friend of mine uses a speed trigger with this rifle. It should work just fine for you if you’d like to give it a shot! I would invest in a Jefftron Leviathan or a Perun V2 to help your rifle perform better with the speed trigger.
Awesome! I will look into both of those, thanks!
This was so helpful thank you
Glad it was helpful! Thanks for watching!
Thanks a bunch dude. I subscribed for this one.
No, thank you! Glad to help!
Thanks my man honestly was scratching my head for a good minute on where the spring went lol
Yezzir I lost mine many times. A ballpoint pen spring always does the trick! (Don't forget to cut a couple coils off for a lighter pull)
Nice vid do you know how sensitive amped hair tune is, you know when build a custom hpa build on there there is an option for hair tune, just curious how tuned is that one compared to yours if you know
It’s pretty good, but nowhere near as good as mine. 😎
Done this on my Upgraded Nuprol Defender, arrived at site with gun fully configured went to chrono everything went fine till I test fired after chrono and got asked to slow down on the trigger 😂😂😂
what gun is that ,and is that stock gear box?
All info is in the video!
I’m late but will this work on a Vfc Avalon
I believe it will!
@@CrazyAsianAirsoft Thank you! This video was very helpful! You earned yourself a sub!
@@CrazyAsianAirsoft I think I need a micro switch trigger. Do you have any recommendations.
Thanks bro!
A great starter gun to do this mod on is the Matrix S&T Sportline M4
Quick and easy and helpful video
Thanks! I gave it my best shot.
Wow you responded fast
Haha I do my best to respond as fast as possible!
are you ever coming back to battalion? and if you know when i would love to know because i really want to get to play with you sometime. love the videos and i hope a new one can come out soon
Hey man! I'm at college in South Carolina 9-10 months out of the year, and whenever I'm home, I usually work around 70 hours per week. I do plan to play again soon though, probably in December when I come home for Christmas break. The best way to check and see when I'm gonna play is on my instagram @crazyasianairsoft
If you ever see me out there, come say hi! I love meeting people who watch my videos.
Thanks I had no idea how to do this.
You are so welcome! Let me know if you have any other tutorial ideas!
your nearest field banned hpa? thats wild, the field I play at is almost even split hpa/aeg. I cant imagine thats good for business. safety first I guess
Yeah, it makes virtually no sense. The field owner’s reasoning for banning HPA was “…because everybody that uses a Polarstar is an a**hole.” He made a hasty generalization based off of the bad reputation people have given these guns from videos on the internet for clout. That’s why I’m currently selling my F2 build. It’s the best gun I’ve ever used and I’ve never seen somebody else’s gun shoot better, but I’m tired of getting stereotyped as a douche bag when I’ve done nothing to warrant that.
mah maaan.. .dope vid!!!
Thanks DJ!
Do I need a polarstar to do this? I haven't done anything to my gun except change the spring to lower the fps, so I can play at my local field.
No you do not! Any AEG with a mosfet like the Gate Titan, Aster, Perun V2, BTC Chimera, and Spectre can utilize this mod. The installation is a bit more complicated with an AEG, but the same principle applies. But as far as any Electro-neumatic Polarstar engine, this is the proper way to do it!
@@CrazyAsianAirsoft Will I be able to do this to the SSG-1 USR , I'm not sure
@@kvantti887 Yes you can! Like I said, the installation is a bit more complicated, but once the trigger is installed, you can tune it super short similar to mine!
Does the same trigger and tutorial work for an aeg gearbox
No sir, it’s more complicated with an AEG gearbox. There’s multiple moving components inside an AEG, and you will often be working with optical mosfets, rather than a physical trigger button/switch found on a HPA trigger board.
@@CrazyAsianAirsoft I got it working thank you! I’m just stuck on how to put the g2 gearbox back in the lower part if the sr30. Im going to battle cat this weekend, ill see if they will help me with it if i cant get it.
@@hakeemh7977 cool! If you’re having trouble fitting the gearbox back in, it’s likely the opening for the trigger is now too small for the speed trigger to fit through, meaning it’ll need to be dremmeled/sanded out for it to fit. This is an easy process and shouldn’t take long. Best of luck!
I did it but how come
Mine after a couple of games comes un hair tuned ?
Mine does the same. The vibrations of usage causes the screws to work themselves loose over time. The fix for this is to drip a drop of blue loctite onto the screws, then retune your trigger.
Can u do this with a aeg without a polerstar gearbox
If it has a micro switch mosfet of some sort, yes!
@@CrazyAsianAirsoft thank you but how would I check that?
@@Airsoft-556 anywhere you buy the gun from. The majority of entry level (and higher) M4 aeg come with some form of a micro switch mosfet. Including but not limited to: Krytac Trident CRB, Matrix S&T Sportline, Lancer Tactical, VFC Avalon, etc.
@@CrazyAsianAirsoft would valken come with one?
Depends on the model, Evike will tell you in the specs section one the page of the gun you're looking into!
What size is the star key,driver you used?
I believe 1.5mm!
Can I use a speed trigger on a aeg i was thinking about putting one on my kwa eve 9?
Yessir you can drop these in no problem.
I’m not sure if I did it wrong but I can’t switch it into safty
That's normal! The trigger being tuned backward makes it so the safety cannot fully engage. However, you can file down the safety lever to work with this trigger if you so choose.
So if I have an aeg, I won’t be able to adjust it at all
Nah you’ll be able to
Yo you back?
Yezirrrrrr! Got all new vids coming soon! I'm re-vamping the channel and I am upping my editing!
Let’s gooooooo!
@@airsoftplayer3847 Yezirrrrrrrr
would you be able to use this with a AEG v2 gearbox?
I answer this question in several other comments on this video, that’s your best bet on finding the info you need!
can i order a trigger and it go on any gun ?
@@rileykesler6471 not quite, but you’re on the right track. You’ll need a V2 trigger in order for it to fit in any V2 gearbox, you can compare these easily on Amped Airsoft’s website.
But how do you get to the gear box from the whole gun
You have to fully disassemble the gun by removing the pins and screws and taking apart the body. The gearbox will be inside where you can begin the mod.
Would a upgrade trigger fit in my stock sig mcx aeg?
Thank you
Yes it should!
@@CrazyAsianAirsoft thank you so much
Nice job!
Thank you!
Any way to do this with the Umarex MP5K?
The Mp5k has a V3 gearbox, while the one I use in this video is a V2. There are certainly ways to shorten the trigger pull on a V3, however I haven’t had personal experience with that yet.
Where could I buy this gearbox shell? the gun I want to hpa has a custom v2 gearbox so I’m trying to get a different gearbox that would work
Check with Dane Coleman/TBB Santa on Instagram/Discord, or JJ Moore (RUclips/Instagram) might have some lying around.
Do you need a mosfet for these to work?
On an Aeg, yes you will!
will it work if u dont have a polarstar gearbox?
This mod is for HPA engines that specifically use a physical (non optical) trigger board switch. This trigger also works on most aeg’s but there can also be additional work needed to achieve the same results.
why type of engine, fcu and board do u use? trying to figure out what i want to use
Stock Polarstar everything at the point of this video, but I’ve since heavily upgraded everything!
Aim for a f2 with the gate titan ii hpa mosfet.
Would this work with a Tokyo mauri hi capa g1 gas pistol ? Great video btw
Thanks for the kind words! And no sir it wouldn’t. However, SPEED does manufacture adjustable triggers for hi capa pistols.
@@CrazyAsianAirsoft ok thank you very much I will look into that have a good day
What size of screw driver is that.(The one that you adjusted the trigger with)
1.5mm I believe!
Ik it’s late but do you need a straight trigger or a trigger. With the adjustment screws to tune it?
Either one works just fine! With SPEED Airsoft triggers, the HPA versions come with 2 adjustment points.
do normal aeg speed triggers work with polar stars, i only got ssg build but i might get a fusion engine and i already got nice speed triggers
Any adjustable triggers from Maxx or SPEED will work with any AEG or HPA system.
@@CrazyAsianAirsoft okay I got the speed curved trigger
@@CrazyAsianAirsoft and is the spring needed?
For an AEG, yes. For HPA, no.
can I use a hair trigger with the stock polarstar trigger board?
Yes sir! This mod uses the original board.
alright good, didn’t feel like spending $50 on a new one lol. Thanks!
You got it broski
Best of luck!
This works on any aeg right cause I have a kwa qrf mod 1 and I want a blade trigger
No it doesn’t. You must have an optical or micro switch mosfet for this mod to work on an AEG.
@@CrazyAsianAirsoft are there any blade triggers that don’t need a mosfet cause I don’t want to drop 170 on a gate titan
No sir those do not exist. You also don't need a Titan Advanced. Perun, Jefftron, BTC, Gate, T238, and several other mosfets will all work with this mod. Perun makes some much cheaper fets, and Gate also makes a Basic Module that's only $80.
My engine now 😈
Does it have to be hpa for that trigger or can it be an aeg
This trigger will work in almost any aeg, but the mod doesn’t usually work on an aeg because most mosfets are optical, and the trigger has nothing to bounce off of. The Polarstar trigger board has a clicky button on it for the trigger to bounce off of, unlike most aeg mosfets. To be safe, if you want to do this mod on an aeg, simply cut a few coils off of a ball-point pen spring, and use that for the trigger to bounce off of. This will still give you an extremely light trigger pull, but it will ensure that it bounces back to the forward position properly.
Nice vid bro👍
Thanks man!
This was amazing, need more people like you
Thanks man! Working on several new videos currently. Going to release those asap. (Currently at college)
Can i do this on my Sa-e09 and is it worth it?
Can I do this with an S&T Gen 3 gearbox with a micro switch trigger?
Unfortunately no, speed triggers don’t fit in the G3 gearbox shells without dremel work, but you can shorten the trigger pull on the stock trigger using heat shrink. I show how to do that in my life stream videos that I posted on my channel!
Do I need an electric bored or can I use it on a kythera?
You can do this mod on a Kythera, but you can’t tune the trigger to be as sensitive without an electronic micro switch.
@@CrazyAsianAirsoft will a jack work?
Yessir
What screw drivers are you using and where can I find it
I’m using a .14mm Hex screwdriver. Any hardware store should carry them!
@@CrazyAsianAirsoft what about the small one?
The small one to tune the trigger is the .14mm I believe. As far as the gearbox screws go, most of them will need a simple Philips head to remove them, not a star bit like mine.
Is this the same gearbox as the ssg1
Yes sir. The ssg1 has the same gearbox as the Arp9 and Combat Machine.
Do i have to buy a specific trigger for the gun or any will work?
You can do this mod with a SPEED, MAXX, or a modified standard V2 trigger.
Do you need a polar star to install a sped trigger
No sir! Almost any type of Airsoft gun can take some form of a speed trigger.
@@CrazyAsianAirsoft do yk if the speed qb eve-4 can?
Yes sir that one can! Sorry for the late reply. As far as I am aware, the SpeedQB versions of those rifles come preinstalled with a SPEED or MAXX trigger.
what size hex key do i need to screw this?
1.5 I believe
Good video bro
Thanks JD!
So then what are you saying I won’t be able to do
If you don’t use at least a small pen spring with this trigger on an aeg, the mod won’t work. The trigger needs to have something to bounce it back to the forward position.
Will this work on a game face ripcord m4
Unfortunately not.
kinda late but can you install a speed trigger into a redline n7 engine?
I believe so, however some additional modification might be needed. I haven’t had a ton of experience with the N7 yet. I do know that you can easily shorten the trigger pull on a regular V2 trigger for those. (Video on that mod coming soon)
Is the safety lever metal? And is it hard to file/sand down?
Yes sir they’re metal, and they aren’t difficult per se, but they do require patience to file down to get that perfect balance between a functioning safety, and a hair trigger.
Does this work on the wolverine inferno v2
I believe so. I haven’t worked on a Wolverine in quite a while, but this mod will work as long as the microswitch on the trigger board is present.
Thank you. Never done a HPA mod before but I have a stock kwa and want to do this
Do you need a mosfet to install and make a speed trigger work for a regular aeg not a polostar
Yes you will. Any aeg without a mosfet will not be able to work with this mod. They use as standard trigger trolly that will lock up or double fire with this mod. You will need a mosfet of some kind.
Whats a mosfet
Do you know a speed trigger that good for a G&g Far 556?
@@jajuantaylor691 G&G M4’s and their variants work well with both SPEED and MAXX triggers in my experience. You should be good to use either one!
@@CrazyAsianAirsoft you know any recommendations for speed triggers
The brand "SPEED" are my personal favorites. The "Blade HPA" version is the best and most popular.
@CrazyAsianAirsoft ok then thank I'm write that down I just got into airsoft and I be trying to find people with great upgrade knowledge cause I got want to upgrade it
@@jajuantaylor691 welcome to Airsoft! I’m happy to help however I can.
What gun is this
Custom Polarstar F2 build that I built myself
arp9 right what is the gear box called.
Yes. This gearbox shell is from a G&G Arp-9.
I had no idea you could use these triggers without the spring!
Of course! It’s different with AEG’s, as you’ll want a mosfet with a physical button microswitch for the trigger to bounce off of if you want to go without a spring.
@@CrazyAsianAirsoft So I just dropped a Polarstar Jack in, and I usually notice after a while the trigger doesn't hold the same "hair trigger" non movement, and i was wondering if it was because of the spring so i considered removing it and trying it after seeing your video
The spring has to do with that, but also the screws in the trigger itself will be loosened over time from movement and vibration of the gun. I suggest using some blue loctite to hold the screws in the position to which you tune them. And lose the spring, then let your fingers fly!
@@CrazyAsianAirsoft I just got the blue loctite in and I'm letting it sit and I still have the spring but maybe I'll give it a try without once it dries out tomorrow!
@@dahlsoft4455 sounds good man! Let me know how it goes! Best of luck.
Does it work on normal aegs
Not unless they have some sort of physical microswitch for the trigger to bounce off of. Such as the G&G Arp9!
Can I do this with a stock trigger
Yes but it’s far more complicated. You’ll need to add solder, or some other physical stopper at the front and back points of the trigger to eliminate the play.
does this trigger work on an arp9?
Yes it will!
@@CrazyAsianAirsoft thank you i bought it and was worried it wouldn't work
dose this work with any speed trigger and any gearbox the same as in the video?
This will work with Maxx and SPEED Airsoft triggers. As far as gearboxes, some may require a little dremel work, but most V2 gearbox shells should work.
@@CrazyAsianAirsoft I just have a g&g raider will it work with that?
@@declanglx6265 yessir that will work very well. The gearbox used in this video is from a G&G.
@@CrazyAsianAirsoft okay mate cheers thanks a lot
Yo bro I’m kinda late so you might not see this, but my trigger doesn’t reset with the spring, is there a way you can tell me how to install without it ?
Hey man! What system are you trying to do this mod with? Is it in AEG? Or is it a HPA system? If it’s HPA, what engine? If it’s an AEG, most MOSFETs don’t have a physical button that can push the trigger back to its reset position on its own, So that could be a problem. If you are using an HPA system, your trigger board microswitch, might not have enough spring tension in it to push the trigger back into place after each shot.
@@CrazyAsianAirsoft I’m running an aeg krytac with a gate titan
With an AEG, you need the spring. Almost every mosfet on the market now is optical, and doesn't have a physical microswitch for the trigger to bounce off of. Therefore, you will need a spring. But you can cut a coil or two off of the spring before installation to make the pull lighter.
Do you need the spring in order to adjust it?
No sir, the trigger has holes that come pre-bored into it. There are set screws that can be loosened or tightened with a small Allen key. The spring isnt needed in order to tune this.
@@CrazyAsianAirsoft so if that the case what is the spring for
Most fields require trigger springs for all guns, but the spring also is there to simulate a realistic firearm trigger pull.
Noice Peter
Thanks Zach!
What tool
1.5mm Allen key
I can't seem to tune it that short without it double firing a little
What engine are you running? Jacks run into that problem a lot, but sometimes you gotta tune it short, and just hit the trigger harder to avoid double firing. Depends on the engine.
Yeah I'm using a jack without the trigger sping
For some reason, despite using the same trigger board, the Jack/F1 (Single Solenoid) engines seem to double fire more when attempting this mod. If you can't get rid of it, you could invest in a black leaf trigger board. The button is a bit harder to hit on this board, but it has a nice clicky feel like on the Fusion Engine.
You still using iMove?
For now yeah, but I am working on learning to use Final Cut Pro so that I can start using that.
@@CrazyAsianAirsoft cool I have been watching a lot of Final Cut Pro videos, I am not getting it but is looks cool.
@@thomascodm6782 Same bro lol
can you put that to stock M4?
Not the trigger mod, no sir. But the Polarstar engine is a drop in for the majority of M4’s.
@@CrazyAsianAirsoft so its only for polarstar engines?
@@CrazyAsianAirsoft i mean if its for Stock AEG M4
@@jakub-games1899 you can only do this mod to a gun that has some sort of microswitch that the trigger can touch. For instance, you can do this mod to a Matrix S&T, or a G&G ARP-9, but not a Krytac CRB.
@@CrazyAsianAirsoft OK thank you
can you do this on and aeg
Yes! All you need is a optical/micro switch mosfet such as the G&G mosfet, Gate Titan/Aster, BTC, Perun, or T238.
Is this an aeg? Will it work
No, this is HPA. And yes, it works amazing.
@@CrazyAsianAirsoft so it is indeed the same process for an aeg m4. I'm wanting to change my trigger for a stainless steel red gun
The process is similar, but with an AEG there are a lot of critical components that you must be sure to remove and replace exactly as you found them.
So does it work without the spring
Of course it does.
@@CrazyAsianAirsoft igjt bc I’ve had my f2 for a year and my buddies say the spring is needed to set back the trigger bc the micro switch isn’t stronger enough to send it back
@@CrazyAsianAirsoft and cutting some coils off would make it better to rigjt if I were to keep the spring
@@justinhunting803 Then he hits the trigger too hard or the trigger is tuned too tightly. My friends and I have never had issues with not using a spring. Although if you prefer to just cut a few coils off, that’s fine too.
Thx
Any time!
yooooo i got a polarstar jack!!!!!!!!!!!!!
Nice man 💪🏼 Jacks are amazing engines. Capable of a lot of mayhem.
@@CrazyAsianAirsoft right! I was surprised at how quiet it is.
Does this trigger work in an AEG?
Yes sir
www.evike.com/products/20787/
What kind of trigger do I need for this.
I'm wanting a shiny steel red trigger
ampedairsoft.com/speed-airsoft-hpa-m4-tunable-red-blade-trigger/
This is what you'll need!
is this binary?
No sir
I have no idea what any of this means but here’s my comment💀💀💀🤣
Woman detected, opinion rejected.
@@CrazyAsianAirsoft w
Local field banned hpa that’s so lame !!!
Dang