PUSHING THE LIMITS... 1/16 RC speedruns and CRASHES😱

Поделиться
HTML-код
  • Опубликовано: 25 ноя 2024

Комментарии • 165

  • @guentherfranzsemmler7245
    @guentherfranzsemmler7245 2 месяца назад +2

    Ich habe zwei baugleiche Autos (ZLL SG 116 Max) wie dieses. Eins sogar mit Armschwingen aus Alu. Fazit: beide sind si ch ähnlich, aber doch unterschiedlich in der Fahrweise. Sicher ist beide machen extremen Spaß! Das schönste an diesen Autos ist dass man alle Teile austauschen kann. Leider kann im Inneren wenig verändert werden, da sie auch nur begrenzte Fläche haben. Weitere Tunings hab ich im Auge, aber momentan weiß ich nicht weiter

  • @kjetilpedersen583
    @kjetilpedersen583 6 месяцев назад +2

    🙏 Thanks for sharing this.Yes 106 is nice speed for the cars

    • @rccrazy
      @rccrazy  6 месяцев назад

      You are very welcome and thank you for watching👍
      Very happy getting over 100kph😁

  • @tahayt6142
    @tahayt6142 Год назад +4

    Great video bro thanks for the testing mine is on the way I'm surprised it handled it at 100c as well esc didn't burn that little thing is a beast hope to see more vids on it soon

    • @rccrazy
      @rccrazy  Год назад +2

      Thanks and you are welcome👍
      Yes I was surprised it done so well without any issues, plenty fast for the size aswell😅
      I'm waiting on some new diffs then I will do some mods and speedrun it again, stock motor on 4s first I think😁

    • @tahayt6142
      @tahayt6142 Год назад

      @@rccrazy broo imagine if it can actually take 4s that's just gonna put arrma to shame😂

    • @rccrazy
      @rccrazy  Год назад +1

      Motor should be good just hopefully it keeps its stability on 4s, think we may need some more appropriate wheels😆

  • @armandopace6113
    @armandopace6113 Год назад +2

    Insane trying to get these little beast's to fly and they are flying ✈. They need wings 🤪🤣🤣 great video mate 👍🦘🏁🤣🤣

    • @rccrazy
      @rccrazy  Год назад +1

      HBX wants to fly without wings🤣
      It is definitely fun trying to get small cars to go really fast but it far from easy.
      Thanks mate😎🤘

  • @renercadventures
    @renercadventures Год назад +1

    Thanks for sharing my friend 🤩👏

    • @rccrazy
      @rccrazy  Год назад +1

      You are welcome Rene🙂
      Thanks for watching👍

  • @SouthernDestinations47
    @SouthernDestinations47 Месяц назад +2

    Nice mate, what do you think a solution would be for high speed run stability?
    I noticed all of Kevins speed run cars have extended bodies

    • @rccrazy
      @rccrazy  Месяц назад +1

      Thanks mate.
      So I wouldn't really go too crazy modding one of these for proper high speed because they are just not made for straight lines, too small and light weight.
      Body will only help if everything else is capable of what your wanting but that's just it, what is high speed to you with this car?
      100mph+ with these cars is not really possible unless you know exactly what your doing which I don't sorry.
      Heavy long and narrow is what you want for speed👌

    • @SouthernDestinations47
      @SouthernDestinations47 Месяц назад +1

      @@rccrazy ahh I see. I can see how weight is definitely a factor at high speeds. The more wind-air the car gets, the less weight it has on the wheels and there goes your traction and stability.
      And to answer your question, I think 50-60 MPH (sorry I’m in US) is plenty fast enough for said size of car but it’s still pretty neat seeing the little thing just rip down the pavement flying past you!

    • @rccrazy
      @rccrazy  Месяц назад

      Spot on mate, air getting under the front end is the main issue, as you've most likely seen even with the most aerodynamic shell air can still get under and lift the car resulting in some crazy damage.
      But yes I have achieved over 100mph with the wltoys 1/14 platform, 136mph with the 1/10 AK917, both highly modded but yes 50-60mph is definitely possible with certain small cars like these👌

  • @doubledome2076
    @doubledome2076 Год назад +1

    SPEED AND POWER‼️👍👍🦾🦾

    • @rccrazy
      @rccrazy  Год назад +1

      Absolutely🤪
      Thanks for watching Dome👍

  • @peteuncle2935
    @peteuncle2935 Год назад +1

    Nice runs, pity the street wasn't clear and there was traffic too.
    For the steering, you could add some exponential setting to the steering, say 20%, it reduces movement of the servo around the centre point so initial steering input is very gradual.
    Makes cars less twitchy and easier to steer straight.

    • @rccrazy
      @rccrazy  Год назад +1

      Thanks Pete👍
      No not the best time for speedruns with all the parked cars and traffic.
      Yeah I may have to dial in some expo I think and possibly use AVC if I have another Spektrum AVC receiver to go in it👌

  • @marco-g3c8s
    @marco-g3c8s 8 месяцев назад +1

    Grazie ,sono Marco da Oristano .Ho acquistato la rc 16102pro,è pazzesca!grazie e complimenti

    • @rccrazy
      @rccrazy  8 месяцев назад

      Thanks Marco😊
      Glad you are enjoying your car😃

  • @samucapb2
    @samucapb2 10 месяцев назад +1

    Where can I find the tires that you are using on your JJRC Q117? Thanks!

    • @rccrazy
      @rccrazy  10 месяцев назад

      I got mine from Ebay Australia but these are exactly the same👍
      nl.aliexpress.com/item/1005005960649731.html?spm=a2g0n.shoppingtesla.mainproduct.d0.2e5bL3liL3liZb&pdp_npi=3%40dis%21AUD%21AU%2436.70%21AU%2420.91%21%21%21%21%21%40210307c117052937553108603e0279%2112000035056089934%21btf%21%21&afTraceInfo=1005005960649731__unknown__c_ppc_item_bridge_lp__gcGHQWR__1705293755556&gatewayAdapt=glo2nld

    • @superteuteuch
      @superteuteuch 10 месяцев назад

      hi, what's the hex size?i cant find the info anywhere
      @@rccrazy

    • @rccrazy
      @rccrazy  10 месяцев назад +1

      12mm hexes👌

    • @superteuteuch
      @superteuteuch 10 месяцев назад +1

      @@rccrazy perfect!

  • @roadstar499
    @roadstar499 4 месяца назад +1

    Very cool runs...i have new jjrc 16th scale brushless race car..uses exact chassis and radio as your orange truggy which i also have...i installed a surpass 2845 5900 kv in race car..since it has smaller wheels top speed on 2s lion batt is 25 mph...anyway using stock battery it was over 30 mph using a 20t aluminum pinion..problem is pinion gears stripped out in 40 seconds...my car stock uses 18 t steel pinion...but when motor mount is flipped over a 20t mod .6 meshes perfectly ...i ordered a jjrc 18t which hopefully works perfectly..i reinstalled its stock motor and pinion and ran it hard fir 5 mins with no issues..fingers crossed the steel jjrc pinion will handle the more powerful higher kv motor...the stock motor in jjrc race car is only a 2440 4500kv..which gets pretty hot... thanks for sharing 😊

    • @rccrazy
      @rccrazy  4 месяца назад

      Yes aluminium pinion gears are not strong in any situation these days really, maybe brushed drift cars but even then I'd want a steel pinion.
      But I found 22t to mesh properly when the mount is turned around, 20t was too loose for mod0.6 so maybe that contributed to it stripping super fast.
      Definitely go steel but next time try a 22t, hopefully the mount is exactly the same as on the truggy and buggy👍

    • @roadstar499
      @roadstar499 4 месяца назад +1

      Wow...thats awesome,so i guess discipline rc got it wrong saying only 18t and 20t work with that mount...i am pretty sure jjrc would not change motor mounts specs for these cars,because it would be extremely unnecessary a dumb thing to do... Also using a 22t would add 20% more top speed over 18t which would get this jjrc sg 218 around 40 mph on 2s using 2845 5900 instead of stock 2440 4500kv...you really know your stuff..thanks for all the great information...😊

    • @rccrazy
      @rccrazy  4 месяца назад

      I guess so according to my experience.
      Like I said all my JJRC models have been 18t and 22t, being smallish teeth you don't want that typical gap or play between the gears like you would have with mod1 or mod1.5, but again alloy is not good in high torque situations.
      And yeah you'll get more top end speed anyway using a 22t so I say woohoo🥳😅
      Best of luck and just remember failing is all a part of learning👌✌️

    • @roadstar499
      @roadstar499 4 месяца назад +1

      Well if mesh was off like you said it makes perfect sense...i ordered 2 22t surpass hobby brand pinions...could not find steel,but i think these may be better quality alloy...only $7.50 shipped from ali...i will only run on stock 2s..it should be fine..if not i will find some steel pinions next time...thanks again.. 😊

    • @rccrazy
      @rccrazy  4 месяца назад

      @roadstar499 yes hopefully they are a steel alloy mix or something, no standing backflips and you should be good🤪

  • @hotkeys6853
    @hotkeys6853 Год назад +2

    Thats awesome! I bought something similar to yours (scy16201- conquerer) because a video you posted before. I put same same sized motor 2847-4500kv in mine with stock gearing i was able to get 63mph-101kph. I love these little things so much fun. Do you know what specs the pinion your running are? ive ordered a couple and cant seem to get one that meshes properly with the spur.

    • @rccrazy
      @rccrazy  Год назад

      EXCELLENT results👏😃
      Yes they are awesome little bashers!
      I believe the pinion and spar is Mod0.6, I think the stock pinion is 18t and if you flip the motor mount around you can fit 20t or 21t pinions for higher speed😁

    • @hotkeys6853
      @hotkeys6853 Год назад +1

      Thank you so muuuuccch!! Can't wait for your next speedrun videos on this! Subscribed and liked the video. I wish you all the best. I am looking forward to more content.

    • @rccrazy
      @rccrazy  Год назад +1

      You are very welcome!
      I got to install some new diffs but yes I will try and get it out again for at least 1 more speedrun, 4s next time🤪
      Thanks👍

  • @droogsurgeon1440
    @droogsurgeon1440 8 месяцев назад +1

    So you can run it stock basically, with a 3s and it won’t kill the engine?
    I fly cheap little RC helicopters and don’t know anything about RC cars. But I just ordered the truggy as you call it, I’m super excited about it, but I really need a crash course on how everything works, what it is, why I need it and the cheapest and best ways to improve it. I’m extremely poor, I’m waiting on a hip replacement and I’m out of work. Living off a small check each month.
    Any videos you have made that answer those questions would be sick, and much appreciated.
    ❤from Atlanta Georgia USA

    • @rccrazy
      @rccrazy  8 месяцев назад

      Hey mate👋
      So the motor will not have any issues running 3s but some of the 2in1 boards(receiver and esc) can not run 3s.
      When you get your car check to see if the 2in1 board is mounted to the chassis with double side tape or 3 screw tabs.
      The ones mounted with 3 screw tabs seem to fail on 3s every time but the ones without the tabs do excellent on 3s🤷
      And upgrades, I highly advise getting some oil shocks for it as the stock shocks are friction shocks and are SOOOO bouncy.
      Get 65mm maximum shocks so the car can bottom out, that will prevent parts like swing arms, hubs, wheels, bearing and the shocks themselves from getting over stressed when the shocks are fully compressed.
      Other than that these car are pretty well set-up.
      Some diff modding like shims and doff oil would be helpful to prevent damage but not needed.

  • @timallen6035
    @timallen6035 Год назад

    Good video. Nice speed runs.

    • @rccrazy
      @rccrazy  Год назад +1

      Thanks Tim😁
      Definitely need to get out for some more speedruns👌

  • @Undertwolitre
    @Undertwolitre Год назад +1

    111 is epic for a 16889 mate !

    • @rccrazy
      @rccrazy  Год назад +1

      Thanks mate😁
      Yes I was happy with that, as it is I was expecting some trouble at speed though😅
      Few aero mods and some tweaking it should get 130kph at least🤞

  • @SnaSna-h6c
    @SnaSna-h6c Год назад

    Uncle, when uncle changes riceiver, uncle changes fish, no control

  • @bendavis4675
    @bendavis4675 10 месяцев назад +3

    Mine went up in smoke after I tried using a 3s battery in my JJRC Q117 . Unfortunately after just a few minutes not even close to full throttle, it started smoking and immediately stopped working. I live in a snowy climate so I wasn't sure if it was the battery or that it was dusted with snow on the inside. Has anyone else used them in wet or snowy conditions?

    • @rccrazy
      @rccrazy  10 месяцев назад

      Oh no, your not the first person to say it failed on 3s.
      Not sure how all mine work so good on 3s🤔
      I can not help with wet or cold weather driving sorry, but as I said others have failed due to running a 3s lipo.

    • @bendavis4675
      @bendavis4675 10 месяцев назад +1

      Thanks for the response! Mines still under warranty so I’m exchanging for a new one. What battery do you use? Maybe I bought bad battery.

    • @bendavis4675
      @bendavis4675 10 месяцев назад

      Thanks for the response! Mines still under warranty so I’m exchanging for a new one. What battery do you use? Maybe I bought bad battery.

    • @rccrazy
      @rccrazy  10 месяцев назад +1

      @bendavis4675 that's good!
      I use ZEEE 850mah 100c 3s lipos.
      I don't think it was a bad lipo though, as I said quite a few people now have said their escs failed on 3s so just be aware it may happen again.
      If the esc has changed in any way between manufacturing runs that could be the issue, 1 different diode or capacitor and it can effect its capabilities.

    • @bendavis4675
      @bendavis4675 10 месяцев назад +1

      That makes sense. Thanks for the help!

  • @OttoQuideau-Cronin
    @OttoQuideau-Cronin 3 месяца назад

    Just a quick question ive got this car and im about to receive some 3s battery whats the best esc you recommend or any other components i should uprade so that nothing blows up 😂

    • @rccrazy
      @rccrazy  3 месяца назад

      If you are going to use a hobby grade esc you will also need to replace the controller and receiver as you can not use the stock controller or receiver(2in1 board)
      But I definitely recommend getting a good quality esc if you do go down that route, Hobbywing 40a or 50a will fit, I use the Hobbywing 10bl50a in mine now and it's flawless.
      Please don't buy Surpass or GoolRC escs they are terrible😬

    • @OttoQuideau-Cronin
      @OttoQuideau-Cronin 3 месяца назад

      @@rccrazyok thank you for that ive looked around but cant seem to find that esc it would be amazing if you could send me the link if not thats ok thanks for the advise

    • @rccrazy
      @rccrazy  3 месяца назад

      The 10bl50a or the esc in the video?

  • @magnusstone
    @magnusstone 5 месяцев назад

    Would you say the 850mah is enough? I usually use 2200mah in the MJX/HBX ones (3s)

    • @rccrazy
      @rccrazy  5 месяцев назад +1

      Well 850mah 3s is perfect size for this cars battery bay, you could possibly get taller lipos in there with a DIY latch to go over a taller lipo but longer won't fit, my 2200mah 3s would never fit.
      Personally I'm happy with 15mins Max run time and just take a few with me.

  • @t3floz
    @t3floz Год назад

    What is best? The original lion or 2s? Whats faster and what about runtime? Also is it a big chance that the esc will breake on 3s?

    • @rccrazy
      @rccrazy  Год назад

      Lipo will be slightly faster but much better punch, I think liion would give a little longer runtime as a lipo with the same Mah.
      And most people have had great success running 3s, only heard of 1 case where there was a problem but according to the owner it seemed like it was faulty from the beginning.

  • @MwaleedU
    @MwaleedU 4 месяца назад

    Mate help something happened to my JJRC battery.. I bought new JJRC but it is not moving backward or forward but yes the steering works, it turns left and right but the light of the RC flashes continously which is a sign of battery mal fucntion, Now what should i do?

    • @rccrazy
      @rccrazy  4 месяца назад

      I thought flashing light was a indication of a flat battery.
      You charged the battery to FULL yes?
      If so then it will be as you said a faulty 2in1 board, in that case it would be a warranty claim or just order a new jjrc 35a 2in1 board.

  • @roadstar499
    @roadstar499 5 месяцев назад +1

    On the orange truck was that all stock except for the Hbx wheels..88 kph is insane.what about motor and esc temps? Thanks for sharing

    • @rccrazy
      @rccrazy  5 месяцев назад

      You are very welcome👍
      Yes 100% stock but the HBX wheels and temps were fine👌
      But one think you need to know if you don't already, there is two different versions of the esc, one with screw tabs that are for it mounting to the chassis, they do NOT survive 3s.
      The other will run on 3s and with a 22t pinion on the motor all day, it looks identical but has no tabs and is held down with double side tape instead.

    • @roadstar499
      @roadstar499 5 месяцев назад

      ​@rccrazy ..i actually found one today...how do you know about esc issues with the ones with tabs...several reports or personal experiences? I did buy a sg918 which is same manufacturer it has screws and tabs holding esc...i ran it on 3s in 95 degree heat..6 or 7 350ft runs.very fast,but not 55 mph..it uses 18 pinion and 2440 4600 kv..handled so good...decipline rc moded his and got 66mph..insane..thanks for the feed back.😊

    • @rccrazy
      @rccrazy  5 месяцев назад

      Oh sweet you got a good one, unless it got super hot on 3s as most people reported.
      But yes almost every person that I know of that tried 3s on the tabbed ones they failed very fast and in some cases actual flames😬
      I have blown one tabbed one on 3s in just a single pull of the trigger.
      And yes these could quite easily get 70-80mph with the correct setup.

    • @roadstar499
      @roadstar499 5 месяцев назад

      ​@rccrazy ..i actually found one today...how do you know about esc issues with the ones with tabs...several reports or personal experiences? I did buy a sg918 which is same manufacturer it has screws and tabs holding esc...i ran it on 3s in 95 degree heat..6 or 7 350ft runs.very fast,but not 55 mph..it uses 18 pinion and 2440 4600 kv..handled so good...decipline rc moded his and got 66mph..insane..thanks for the feed back.

    • @roadstar499
      @roadstar499 5 месяцев назад +1

      Yes,maybe its a good one but 2440 4600kv motor gets pretty hot on 2s and real hot when i ran 3s..car runs very smooth though..i have heat sink on the way and i will probably hook up cooling fan...i also had ordered the 116 pro right before i watched your video..also have oil shocks coming with it...fingers crossed i have the good esc/rx installed...thanks

  • @francabarros
    @francabarros Год назад +1

    Hello friend. Congratulations on the video. I'm following your channel because of the quality of the videos about jjrc 1/16. I'm waiting for mine to arrive from China and I also bought some upgrades according to the list: Platinum ESC 150-SL / CNHL 3S 1500mah 100c / Dumborc X6FG / Oil Shock absorber / Aluminum heatsink with 40mm cooler. I'm thinking about testing the 2840 brushless motor and measuring the temperatures. If it gets too hot, I'll jump to a 3665 3800Kv with a 22T pinion. What do you think of this upgrade? I would like your comments about this setup and if possible, make a video testing this setup for us ;-)

    • @rccrazy
      @rccrazy  Год назад

      Firstly, thank you very much!🙏
      But I'm afraid you have purchased a much too large esc, 50a may fit but 45a is plenty.
      I don't think a 1500mah 3s will fit either, biggest I could fit in the battery tray was 850mah 3s.
      And I'm so sorry but I have more bad news, 36mm size motors won't fit these cars without MAJOR mods and a DIY motor mount, 28mm maximum so a 2850 will fit just!
      So sorry😕

  • @yatescharles69
    @yatescharles69 Год назад

    Nice build

    • @rccrazy
      @rccrazy  Год назад

      Thanks for checking it out👍

  • @hectorchavez7616
    @hectorchavez7616 Год назад

    HOLA BUENAS NOCHES, ME PODRÍA PASAR EL ENLACE DÓNDE COMPRÓ LA BATERÍA DEL CARRO COLOR NARANJA Dive JJRC Q117 ...?

    • @rccrazy
      @rccrazy  Год назад

      www.amazon.com/Zeee-Premium-Quadcopter-Helicopter-Airplane/dp/B08H5GD35D/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8

  • @wilber8637
    @wilber8637 6 месяцев назад +1

    Wheel size inside is 12mm..if any wheel is 12mm must can use at him already...if im at there im also must join bro play together too...

    • @rccrazy
      @rccrazy  6 месяцев назад +1

      Sorry about the late reply.
      Yes if you really wanted to you could use HUGE 1/10 monster wheels, not a good idea for the diffs though😵😅

    • @wilber8637
      @wilber8637 6 месяцев назад +1

      @@rccrazy never mind brother...is ok...im also got think want to use more bigger wheel too..😅 want to do same like brother rc car also... brother have a nice days ..

  • @GM-rs1rj
    @GM-rs1rj Год назад +1

    Is it worth upgrading the tires with inserts?
    Nice video btw 👍😎

    • @rccrazy
      @rccrazy  Год назад

      Thanks👍
      But sorry, I don't quite understand, the wheels have foam in them already.

    • @GM-rs1rj
      @GM-rs1rj Год назад

      @@rccrazy do the original wheels have foam? To me they feel really soft therefore I was looking to change them. But if they are filled already it will not make much of a difference I guess.

    • @rccrazy
      @rccrazy  Год назад

      Oh sorry I didn't realise you were talking about the stock wheels having HBX wheels in this video, which do come with foam.
      No I don't think the stock wheels have inserts.
      In some cases it helps having foam inserts but I don't think it's necessary with these little cars just bashing around.
      But if you like to upgrade or just tinker on your cars then why not experiment😁

    • @GM-rs1rj
      @GM-rs1rj Год назад +1

      @@rccrazy alright thanks. The upgraded shocks are on their way so u think that will improve a lot. Thanks for the reply 👍

    • @rccrazy
      @rccrazy  Год назад

      Your welcome👍

  • @Mick_Au
    @Mick_Au Год назад +1

    Awesome man shame about so much traffic would be good if it was a dead end road. How’s the battery 😬😬😬

    • @rccrazy
      @rccrazy  Год назад +1

      Thanks Michael👍
      Yeah we couldn't get to my big speedrun road and I expected so much traffic or so many cars parked.
      The battery is ok, wasn't punctured so should be pretty safe still👌

    • @Mick_Au
      @Mick_Au Год назад +1

      @@rccrazy Glad to hear You don’t like hard case battery’s?

    • @rccrazy
      @rccrazy  Год назад +1

      Well it's not that I don't like them I've just never had any luck with hard cases, all failed in no time🤔

    • @Mick_Au
      @Mick_Au Год назад +1

      @@rccrazy Interesting mate maybe because they heat builds even more inside. Also can’t see what’s going on with the hard case at least soft pack can tell straight away.
      Keep pumping out the content! 😎👍🏻🥳

    • @rccrazy
      @rccrazy  Год назад +1

      That's it, at least you can somewhere keep an eye on soft cases👌
      Working on content 24/7 pretty much mate, im just slow 🐌 😅

  • @judybustamante9859
    @judybustamante9859 Год назад

    I like those HBX tyres but i find the car flips too easy once you use tyres above 85mm.
    And have you stripped the gears yet with all that power?

    • @rccrazy
      @rccrazy  Год назад

      These are one of my favourite wheels for smaller cars, they are so offset, I have never really had rolling issues with them.
      One tooth gone from the rear crown gear but they lasted a long time and very cheap to replace, definitely not complaining for the price.

  • @marvinv2372
    @marvinv2372 Год назад

    What size 3s battery can I get for this amazing car

    • @rccrazy
      @rccrazy  Год назад

      I think you could fit around 1000mah upto maybe 1500mah 3s depending on brand.
      I just use 850mah because I know most should easily fit and get long enough run time.

  • @haydenkelliher2859
    @haydenkelliher2859 Год назад

    Extend the wheelie bar out like a drag car

    • @rccrazy
      @rccrazy  Год назад +1

      I'm assuming you mean the JJRC, I'm not modifying anything major for on-road as it's staying a basher

  • @rickykonoloff5047
    @rickykonoloff5047 Год назад

    Dads 😎 man

  • @usethatflame
    @usethatflame Год назад

    Hey was anything running hot after this on the scy with the 3s?

    • @rccrazy
      @rccrazy  Год назад

      No it was fine on 3s.
      I believe even running a 4s esc and lipo with the stock motor would still run cool just doing speedruns👌

    • @usethatflame
      @usethatflame Год назад

      @@rccrazy thanks for the quick response mate, you recommend having a bash on 3s with stock electronics?

    • @rccrazy
      @rccrazy  Год назад

      Yes this car is awesome bashing on 3s with the stock system, no heat issues but just keep in mind more power could damage other components like diffs especially if your landing jumps with a lot of throttle or doing full throttle launches.

    • @usethatflame
      @usethatflame Год назад

      @@rccrazy legend thanks mate I'm goanna order one. Looking forward to see more of your videos

    • @usethatflame
      @usethatflame Год назад

      ​​​@@rccrazysorry man is the battery plastic piece tight when you put the zeee battery in? I can only find batteries that are like 3mm higher and don't wanna snap that plastic thing that holds the battery down. I can't find those zeee 100c batteries anywhere

  • @yCaraleowGamer
    @yCaraleowGamer 7 месяцев назад

    Esse SCY 16102 PRO SUPORTA BATERIA 3S? sem fazer upgrade

    • @rccrazy
      @rccrazy  7 месяцев назад +1

      Technically no only 2s.

    • @yCaraleowGamer
      @yCaraleowGamer 7 месяцев назад

      @@rccrazy como conseguiu usar 3S?

    • @rccrazy
      @rccrazy  7 месяцев назад +1

      ​@yCaraleowGamer only the non tabbed escs seem to run 3s.
      Some are held down by 3 screw tabs.
      If yours is held down by 3 screws DO NOT try 3s but if it has no tabs and is held down by double side tape then 3s may be OK.

    • @yCaraleowGamer
      @yCaraleowGamer 7 месяцев назад +1

      @@rccrazy thank you very much for responding

  • @user-vb3dg3pb6s
    @user-vb3dg3pb6s Год назад

    Cool, where can i buy these rc cars in Australia?
    Let me know, much appreciated bud

    • @rccrazy
      @rccrazy  Год назад

      Sorry mate we'll over slept😴😆
      I get a lot of my stuff of ebay including these JJRC rigs.
      www.ebay.com.au/itm/155379523543?hash=item242d575fd7:g:~D8AAOSw1h5j0zHI&amdata=enc%3AAQAHAAAA4J2Y6W3PmOL2A8%2BY0aLY14rSI60ZuEUAaCoq2afOhzE%2FPZ5Tr7SJJUkh%2F1m78XrRgc0ICO0ceKi1ki%2FUTEtOMdHIts%2BM%2BgSZLZRlATIg%2Bk8yAR2S%2BK56E%2FnDEVOxeM%2BZXtYiTF1P5BqNj%2BNqijHmFRDGEoyRzV6fDQM7208XfYSrmG9hFbeKktnpXuHi0p8j1h7yTb%2BgZjlq5e30CnzFpGa99ARPR1sbjUvqsLDr21bgbqVRthgCNLm5DcY74ufitpbLslSAT5MHkScYT3JwBcnXLm%2FMWBYxddl1xfAnRINZ%7Ctkp%3ABk9SR7jBsbXTYQ

  • @JesseBlum
    @JesseBlum 8 месяцев назад +1

    Just did a 30minutes run with the drive rc truck. But I changed the 4000kv motor to a 3200kv and using a 4s battery haha. It's absolutely nutz

    • @rccrazy
      @rccrazy  8 месяцев назад

      Well yes if your running 4s it's basically impossible to use full throttle so you should get decent run time.

  • @Rustin-ld6qi
    @Rustin-ld6qi 3 месяца назад

    How do you measure speed ?

    • @rccrazy
      @rccrazy  3 месяца назад

      SKYRC GSM020 GPS system(available online)and the phone app.

  • @carlanchastain9989
    @carlanchastain9989 Год назад

    What tires are on the car

    • @rccrazy
      @rccrazy  Год назад

      m.aliexpress.com/item/1005005007721101.html?pdp_npi=2%40dis%21AUD%21AU%2426.01%21AU%2415.86%21%21%21%21%21%402101ef6816842882419525469e6db0%2112000031324237860%21btf&_t=pvid%3Af5c27cac-5a4c-44b1-b210-e95cb5220150&afTraceInfo=1005005007721101__msite__c_ppc_item_bridge__xxxxxx__1684288242&spm=a2g0n.ppclist.product.0&gatewayAdapt=Pc2Msite

  • @mzmhrc1274
    @mzmhrc1274 Год назад

    With that custom motor mount, can u put 3650 motor in it?

    • @rccrazy
      @rccrazy  Год назад

      Not really custom just modded to fit larger pinions.
      I don't think 36mm motors will fit due to lack of clearance, 28mm motor is basically sitting on the chassis already, you could cut out the chassis for the motor maybe🤔

    • @mzmhrc1274
      @mzmhrc1274 Год назад

      @@rccrazy yes i mean modded the stock one. I bought one mjx hyper go brushless maybe will receive it another 2 or 3 days. I think maybe i will return it back and buy this one.

  • @speedslidesandspeedrides1728
    @speedslidesandspeedrides1728 9 месяцев назад

    Can i use 3s with a 35a esc a 4400kv motor and 17tooth pinion gear

    • @rccrazy
      @rccrazy  9 месяцев назад

      If you mean the stock esc then I would not recommend using 3s.
      A good 35a esc and upto 2838 4400kv motors may be OK on 3s but if you start going bigger motors like this 2847 4000kv motor I would highly recommend a 45a or higher esc for 3s.
      And 17t does not fit on these cars without modification, 18t or 22t mod0.6 only.

    • @speedslidesandspeedrides1728
      @speedslidesandspeedrides1728 9 месяцев назад

      @@rccrazy i have a surpass esc with cooling fan 32000rpm cooling and 2845 motor 4400kv in my q901 with 10 scale tires on a 1 16 scale and 14t pinion but the tires geares it to about 18t so can i run 3s on this onroad

    • @rccrazy
      @rccrazy  9 месяцев назад

      @speedslidesandspeedrides1728 yes if the surpass esc is 3s capable then that setup should run fine on 3s on-road👌

    • @speedslidesandspeedrides1728
      @speedslidesandspeedrides1728 9 месяцев назад +1

      @@rccrazy it says 2 to 3s

    • @rccrazy
      @rccrazy  9 месяцев назад

      @speedslidesandspeedrides1728 yes should work then😁

  • @jhomjuarez3328
    @jhomjuarez3328 Год назад

    Hello! Where did you get those wheels? I want them! Nice vid brother

    • @rccrazy
      @rccrazy  Год назад +1

      Thanks for watching👍
      I got them from ebay Australia, sold as Wltoys upgrade wheels but they are actually HBX wheels.
      Just found them available on Aliexpress👇
      m.aliexpress.com/item/1005005007721101.html?pdp_npi=2%40dis%21AUD%21AU%2426.01%21AU%2415.86%21%21%21%21%21%402101ef6816842882419525469e6db0%2112000031324237860%21btf&_t=pvid%3Af5c27cac-5a4c-44b1-b210-e95cb5220150&afTraceInfo=1005005007721101__msite__c_ppc_item_bridge__xxxxxx__1684288242&spm=a2g0n.ppclist.product.0&gatewayAdapt=Pc2Msite

    • @jhomjuarez3328
      @jhomjuarez3328 Год назад

      New subscriber!

    • @rccrazy
      @rccrazy  Год назад +1

      Really appreciate it thank you🙏😊

  • @SnaSna-h6c
    @SnaSna-h6c Год назад

    Hi what is the ESC name and receiver name and what prices

    • @SnaSna-h6c
      @SnaSna-h6c Год назад

      In the first car video

    • @rccrazy
      @rccrazy  Год назад

      Dumborc X6FG receiver
      Hobbywing WP-SC8 120A esc

    • @rccrazy
      @rccrazy  Год назад

      Esc
      www.aliexpress.com/item/1005004384790528.html?&_t=pvid:52be5a3e-c9b1-4aa7-a529-d7bf3c450683&spm=a2g0n.ppclist.product.0
      Receiver
      www.aliexpress.com/item/1005003118208189.html?pdp_npi=2%40dis%21AUD%21AU%2430.55%21AU%2415.89%21%21%21%21%21%402101c5ac16936612409558706e3c3d%2112000031474278603%21btf&_t=pvid:942c4f52-5150-40be-8fe9-18b371abe444&spm=a2g0n.ppclist.product.0

  • @Gobeamang2023
    @Gobeamang2023 Год назад

    16102에 달린 바퀴 링크 알려주세요

    • @rccrazy
      @rccrazy  Год назад

      I can not find them anywhere but Australian sellers sorry.
      www.ebay.com.au/itm/185850359762

  • @SnaSna-h6c
    @SnaSna-h6c Год назад

    Hi how much that you upgrad on the first car video

    • @rccrazy
      @rccrazy  Год назад

      Only changed the esc and receiver.

    • @SnaSna-h6c
      @SnaSna-h6c Год назад +1

      Thank so much for share

    • @SnaSna-h6c
      @SnaSna-h6c Год назад

      And how much of eac and how much of riciver

    • @rccrazy
      @rccrazy  Год назад

      You mean price?

    • @SnaSna-h6c
      @SnaSna-h6c Год назад

      And how much that you change the first car in video with riceiver 45A how much of this riceiver 45A

  • @TomTheSurgen1
    @TomTheSurgen1 8 месяцев назад

    I run mine on 3s all the time no issues m6 end

    • @rccrazy
      @rccrazy  8 месяцев назад

      So I'm assuming your 2in1 board is mounted with double side tape yes?
      The ones that have 3 mounting tabs molded to the box rather than just double taped on do not run 3s or fail very fast.

    • @TomTheSurgen1
      @TomTheSurgen1 8 месяцев назад +1

      @@rccrazy I will check later

  • @JesseBlum
    @JesseBlum 8 месяцев назад +1

    I have 3 of the Drive rc cars now. They have had amazing deals on amazon I put some stronger swingarms. I'm using a 45amp esc and a 3s 2200mah 50c battery absolutely crazy

    • @rccrazy
      @rccrazy  8 месяцев назад

      They are definitely one of the best for the prices listed in my opinion yes👌
      Thanks for checking out the video Jesse🙂