bro what is that square like structure that u inside strap; i accedently broken it so smart watch will work without it properly or is there anything to worry??
I've had a problem with my W90SMARTWATCH.it turn on and works but when i try to connect anything like Bluetooth or pressing the home button it frezzes and goes to a white blank screen.every time i hold the power button it turns off
That is the cellphone signal antenna, if it breaks then the watch will not be able to receive signals, meaning it will not be able to receive calls and make telephone calls.
Got a problem with DZ09 not turning ON. Battery was charged (4.5VDC) but I think that my issue is the battery locating properly. Disassembled the watch, removed straps and back plastic molding. Then replaced battery and all worked OK. Microphone com (black) wire was loose so I will re-soldered in place tomorrow. I think I will have to move the battery contacts forward a bit but not sure. I also found a red wire that has no connection? It does not seem to stop the watch starting? KH
You might want to put a shim in the battery compartment to push the battery towards the pickups. Its a dirty fix but sometimes it works in cases like this.
+Nev's Tech Bits Hi Nev I think part of the issue is the on switch. Mine is too large for the support. I havectried to move it but the tack glue holds it ofside. midnight jere in Aust so will look into it tomorrow. Might also buy a new one from a better supplier.
I have a qiestion when you took of those wrist holders what is that thing an antenna or what that flexible thing cux I accidently cut of my I was in a rush
My DZ09 was working fine as a phone, then I took out the SIM to test another smartwatch. When I put the SIM back into this DZ09, now it keeps saying "Insert SIM". I don't think I damaged any of the contacts at all, since they all look the same as before. I'm wondering if you might have some insight into what would cause the sudden change of heart in this thing?
What's the tab inside the strap is it the Bluetooth? My speaker was not very good so took it apart for the tab to be only just connected maybe it didn't have a strong enough signal die to the Bluetooth tab being very little connected?
so I got my dz09 and I read the instructions. it said to charge for at least 2 hours before use which I did. it turned on and I left it on the charger now it won't turn on. what could be the problem?
Wedge something between battery and backing. The contacts aren't the best on the batteries sometimes. I have two dz09s and switching batteries between the two showed one battery made poor contact.
Didnt think it work again!! Great vídeo. I thought that the componente left inside the belt was manufactoring defect!!. Can you tell what is the AIO compenent cover with black rubber(?) - mine is not. I try to put it working. TY for your good vídeo.adriano
Some questions. 1 what is i put a camera much better then this one. exemple from a proken Iphone 4s will be much better pixels. Will that pixels work on that clock? 2, can i by my phone see what clock is recording by bluetooth? 3, how long worktime has battery? Ty.
The phone is based on MT6561 or related MediaTek feature phone chipset. This particular one and most of the related ones only support up to 5MP camera sensor resolution, and will absolutely certainly fail to synchronize with higher resolution sensors. The chipset is only intended to work with cheapest of GalaxyCore Inc. and OmniVision sensors. Furthermore the connection/pinout may be nonstandard. Also, in all likelihood, software support is only included for the one intended camera module, that has generally been my experience with embedded devices of such kind, but i have not specifically experimented with smart watches. If you have extra modules around and are willing to test, i'm curious what your results will be, but i cannot encourage you, as there is always a risk of things going wrong. I cannot understand your second question, and i cannot truthfully answer the third, as i don't have this watch and you will find different claims, from about 8 hours to a bit less than 2 days. The general consensus appears to be that battery life compares favourably with other colour screen smart watches from China.
+kolovaxata I don't have this watch but I have the Moto 360 2nd gen and dealt with this when I first bought mine, I don't know exactly what I did to get mine to charge but the problem never persisted after words. Try turning it off Bluetooth, wifi if capable, and any form of battery usage than charge, if problem is still active turn it off while it's charging and let it charge for a hour, if problem still persists try turn it on a follow my first step and keep it plugged in all night
mine... was working in the begging... now is not charging anymore...so it doesn't open. I removed batteries and cards.. but i have no idea what can be the problem... any suggestions?
Excuse me dear sir, what is the antenna on the long end of its strap? If the strap gets broken and I want to replace it with a velcro strap where can I put the antenna? Because of wear and tear over time, the strap might get broken and I would need to replace it with a velcro nylon strap for long term durability. Any thoughts on this kind Sir?
+Giovanni Stanford I believe that is the Bluetooth antenna. Be very careful with that. The wire breaks off super easy, not too sure where you would put it on a new band though. Maybe just buy another? They are super cheap.
Giovanni Stanford i wanna ask u something mine is broken the wire and the bluetooth is alright what could happen or it only wont receive calls tnx for helping🤗
Excuse me sir, can you pls do a video of how to remove water from the speaker because when I play music it does this weird static noise and I am thing it is the water. If you know how to fix it pls tell me.
I would like to see you teardown Victorious. By "teardown," I mean dissect each episode - review it, post the video of your reaction, then post a second video of you recapping the episodes for those too lazy to watch each episode but who still wish to keep up with the ongoing story arc.
Le quite la batería sin apagarlo y ya no prende ni nada que hago ahí?
Ni modo😂
Whst is the black wire in the belt
I think that is the Bluetooth antenna
Wow it's still working after reassembling it back again! You are an intellectual superior expert of electronics! 👍👌✌👏👏
A RUclips user with a long name yep. I do this all the time. Did it the day I got my 2016 MacBook Pro with touchbar
A RUclips user with a long name
+Ben “The Mender” David 78
+Ben “The Mender” David 88i788pp
👋👋👋👋👋👋👋👋👟👟👟👟👟👞👞👞👞👞
bro what is that square like structure that u inside strap; i accedently broken it so smart watch will work without it properly or is there anything to worry??
Either it's a network antennae or bluetooth antennae, or maybe both.
@@MrWirelesscallerno its not,i think its for a think called "pedometer"
I am Indian bro but I like your video.
Bro plz tell me the name of that big white thing that is connected with black wire in the straps of the watch
That's the Bluetooth anntenna.
Check out other smartwatch teardowns!:
U8 Teardown Video: ruclips.net/video/-HMgB11eiJk/видео.html
GT08 Teardown Video: ruclips.net/video/wpXv2DiO0BM/видео.html
help
just got a new dz09 and forgot my pass word for my main screen can you please help
Kudos to those who assemble it!
Just the way u disassembled it
Just reverse the video
He has shown in the video
Bro what inside band 1:39 pls say pls
Is there a way to improve the camera? And how to take video, mine is just taking photo. Thanks
No way to improve the camera, and if you dont have a video app your out of luck, friend!
You could manually change camera angle, as for camera - write an app, welcome to nerddom!
I bought Insmarten watch. Where is usb port?
I want to polish that silver case...so plz tell me how to open take that display from that case
QWERTYUIOPĞÜASDFGHJKLŞİZXCVBNMÖÇ,.
Did you tried connect to Rx and Tx testpoints? I'm curious what's running there! A root console? :)
just got my UART in from China. gonna try it out XD
mapooo Did you ever try it? If so, what happened?
I've had a problem with my W90SMARTWATCH.it turn on and works but when i try to connect anything like Bluetooth or pressing the home button it frezzes and goes to a white blank screen.every time i hold the power button it turns off
Apki es video ke baje se me Apne watch Sahi kar paya... Thankq so much....
can we buy a new bluetooth antena from online shopping .
What is the size of screwdriver you use
is it possible to remove the touch lcd from the silver frame?
I believe you could if you had a heat gun
Bro what is that white thing which black wire is connected
What is that component housed inside the wrist strap? Is it required for the functioning of the watch, please reply fast.
I believe it is the blutooth antenna
That is the cellphone signal antenna, if it breaks then the watch will not be able to receive signals, meaning it will not be able to receive calls and make telephone calls.
Got a problem with DZ09 not turning ON. Battery was charged (4.5VDC) but I think that my issue is the battery locating properly. Disassembled the watch, removed straps and back plastic molding. Then replaced battery and all worked OK.
Microphone com (black) wire was loose so I will re-soldered in place tomorrow. I think I will have to move the battery contacts forward a bit but not sure. I also found a red wire that has no connection? It does not seem to stop the watch starting? KH
You might want to put a shim in the battery compartment to push the battery towards the pickups. Its a dirty fix but sometimes it works in cases like this.
+Nev's Tech Bits Hi Nev
I think part of the issue is the on switch. Mine is too large for the support. I havectried to move it but the tack glue holds it ofside. midnight jere in Aust so will look into it tomorrow. Might also buy a new one from a better supplier.
Can u upgrade the watch? Just asking... I don't want u to do it I just want to know if u can
I don't think you can =(
I have a qiestion when you took of those wrist holders what is that thing an antenna or what that flexible thing cux I accidently cut of my I was in a rush
I believe it was for the bluetooth
Brother the black oir and white paper what is this
Are you using the tools for screws names please
My DZ09 was working fine as a phone, then I took out the SIM to test another smartwatch. When I put the SIM back into this DZ09, now it keeps saying "Insert SIM". I don't think I damaged any of the contacts at all, since they all look the same as before. I'm wondering if you might have some insight into what would cause the sudden change of heart in this thing?
FROM WHERE I BUY ANTEENA WHICH PROVIDES SIGNAL IHAVE MISSPLACEDD
Bro gtot touch watch me internet chalta hy batao
How to replace new screen please help me
Just buy a new one bud
What's the tab inside the strap is it the Bluetooth? My speaker was not very good so took it apart for the tab to be only just connected maybe it didn't have a strong enough signal die to the Bluetooth tab being very little connected?
I do believe its the bluetooth antenna.
so I got my dz09 and I read the instructions. it said to charge for at least 2 hours before use which I did. it turned on and I left it on the charger now it won't turn on. what could be the problem?
Jordan Dokken-Ellis i have had similar problems with my watch. I just remove the battery and replaced it abc it worked fine after that.
Yes my watch also like this
Wedge something between battery and backing. The contacts aren't the best on the batteries sometimes. I have two dz09s and switching batteries between the two showed one battery made poor contact.
I wanted to see the breakdown cuz i need to see the wiring to repair that
I hope I helped you bud =)
Didnt think it work again!! Great vídeo. I thought that the componente left inside the belt was manufactoring defect!!. Can you tell what is the AIO compenent cover with black rubber(?) - mine is not. I try to put it working. TY for your good vídeo.adriano
Is there a way to remove the glass in front of the camera? mine is all scratched up
yeah you need to pull it out from the inside
At the end "Connection Failed" = Thumbs up
what is the wire connect to belt of dz09 watch
Does it have an accelerometer?
Some questions. 1 what is i put a camera much better then this one. exemple from a proken Iphone 4s will be much better pixels. Will that pixels work on that clock? 2, can i by my phone see what clock is recording by bluetooth? 3, how long worktime has battery? Ty.
The phone is based on MT6561 or related MediaTek feature phone chipset. This particular one and most of the related ones only support up to 5MP camera sensor resolution, and will absolutely certainly fail to synchronize with higher resolution sensors. The chipset is only intended to work with cheapest of GalaxyCore Inc. and OmniVision sensors.
Furthermore the connection/pinout may be nonstandard. Also, in all likelihood, software support is only included for the one intended camera module, that has generally been my experience with embedded devices of such kind, but i have not specifically experimented with smart watches. If you have extra modules around and are willing to test, i'm curious what your results will be, but i cannot encourage you, as there is always a risk of things going wrong.
I cannot understand your second question, and i cannot truthfully answer the third, as i don't have this watch and you will find different claims, from about 8 hours to a bit less than 2 days. The general consensus appears to be that battery life compares favourably with other colour screen smart watches from China.
Hi, do you have an antenna of signal of DZ09 smart watch
Nope. You might want to just get a new unit. They are so cheap on Ebay.
Great demo.
What is the square paper
La antena
Agar ye tut jaye to kya hoga
@@davmalpivp7559ye mera tur gya he sir kya karu
does a black color wire remains disconnected
any way of making signal stronger has no service unless outdoors
+Horticulture and Bonsai est2005 nope :(
What is the function of the sensor which is under the strap (white colored)
I believe its bluetooth
İts flexible antenna
How to solve wire stip white colour stip I don't have that
I want to change my watch belt, where it is found in Nepal.
apply super glue on it.trust me I also did it and it has never fallen again
Thank you brother for this video
Which sim card insert in smart watch
what kind and size band will fit this watch ??
It's proprietary. The antenna is in the band. You get what you get.
wt happens if we cut the antena?
I believe you loose Bluetooth
Where can I get the hands for this watch model?
LOL
Hello sir vo patte mein tape kaisi hai meri vo tape gum ho gai hai ab watch chal nahin Rahi
What is paper outside the watch? Reply me.
I believe it is bluetooth antenna
Hey hi... its touch screen is nolonger responsive. What could be the problem? and what can I do?
+Tinka george william Sorry to hear that, friend! You could try pulling the battery for a minute. You will probably just need to get a new one
I tried that and it didnt work. Actually.. the screen touch works some times, and fails the other times. I dont know if its because of the weather...
can you replace the processor with a better one?
Nope =/
Bhai meri display work nhi kr rhi kya krun m??
Smartwatch ka kit Mein short Lag Gaya Hai battery bataya Kaise banaa sakte hain RUclips per pahle
After remove the hand beld i was seen a paper type conceted with wire what is this??plz say me
It says 3M
What is its job
@@TigerGaming-xk5om Petty sure it's for Bluetooth
Ohh so can i assemble any other if it lost
the battery is discharging when the watch's power off . Can you help me please ? Thank you.
Has your watch gotten wet at all? That could be where the energy is going
thank you for your response. I bought the watch with this problem.
+kolovaxata I don't have this watch but I have the Moto 360 2nd gen and dealt with this when I first bought mine, I don't know exactly what I did to get mine to charge but the problem never persisted after words. Try turning it off Bluetooth, wifi if capable, and any form of battery usage than charge, if problem is still active turn it off while it's charging and let it charge for a hour, if problem still persists try turn it on a follow my first step and keep it plugged in all night
+Alex R turning off Bluetooth not it off
thanks for your help. I'll try it . :)
THANK FOR LETTING US KNOW WHAT IS WHAT .....NOT!!!!!!!!
Urxcbooiim CNN m
can u give me the band
@@aishwarya6927 😂🤣🤣
Que función tiene ese cable que va desde el reloj hasta la correa ese papelito que se mira hay
Alguien que me responda porfavor
@@alejandracanas7720 es la antena para la señal (saludos).
mine... was working in the begging... now is not charging anymore...so it doesn't open. I removed batteries and cards.. but i have no idea what can be the problem... any suggestions?
Arsinoi Laspiti checked the connector solder points?
Excuse me dear sir, what is the antenna on the long end of its strap? If the strap gets broken and I want to replace it with a velcro strap where can I put the antenna? Because of wear and tear over time, the strap might get broken and I would need to replace it with a velcro nylon strap for long term durability. Any thoughts on this kind Sir?
+Giovanni Stanford I believe that is the Bluetooth antenna. Be very careful with that. The wire breaks off super easy, not too sure where you would put it on a new band though. Maybe just buy another? They are super cheap.
Giovanni Stanford i wanna ask u something mine is broken the wire and the bluetooth is alright what could happen
or it only wont receive calls
tnx for helping🤗
@@NevsTechBits mine broke off 😭
Mazi smart watch madhe incoming call cha ala tar tikdun sound yet nahi pan ikdun jate yacha Kay ahe function
Sir mujhe display chahiye kha milega
Wow Fantastic!
Is the camera soldered on the motherboard or is it one of the Lego connecters?
Pate me vo parche kea hee
Sir mere pas smart watch hai lekin uska touch toot gaya me kya karu
Nice videos
Thanks bud =D
Antenna for sim card.
Excuse me sir, can you pls do a video of how to remove water from the speaker because when I play music it does this weird static noise and I am thing it is the water. If you know how to fix it pls tell me.
Off the device Open back cover and use hair Drayer for water to dry also remove battery if it's possible
How to price the only touch model w88
Altaf Khan kohbaharuna
Sir mera ghadi ka battery Phil gaya tha par dusara battery lagao to power on nahi hata hai
My's smart watch was broken and i fix it again the screen was not working
Have you tried turning it off then back on again?
Samrt wacth touch tut gaya hai
I have smart watch circuit ehat i can make from this please reply
Que?
My watch jack is spoiled how to repair it
+Khushi Raza they’re super cheap just buy a new one
I would like to see you teardown Victorious. By "teardown," I mean dissect each episode - review it, post the video of your reaction, then post a second video of you recapping the episodes for those too lazy to watch each episode but who still wish to keep up with the ongoing story arc.
Watch was falled inwater please you will repair it
Please
You should just buy a new one bud =)
thanks
WOW MAN, N THANKS ..bcoz of ur vdo i could replace my watch band...once again thanks bro✌👊👊👊🤘
Happy to help!
Smartwatch ki touch kese dalegi
Сын разбил экран на такие часы. Не могу найти, может кто подскажет.
HOLA DONDE PUEDO CONSEGUIR PIEZAS DE RECAMBIO DE ESE RELOJ QUE ME HACE FALTA
Que?
@@NevsTechBits he is Asking where to find replacement peaces for the smartwatch.
Bro can u modify this watch I want to modify it .
naw its more the type of things that if it breaks you replace it.
I have problems with push button home,,, is not working,, is new set,,,
If you just bought it, I would ask for a refund
Bhai MO Chhota bottom nahi chalu hai
Sim Card plate tut gaya hai kaise
Lagega
I want to remove the polarizer please tell how
Smart watch ka pura sisa tut gya golgo hota
Mere à1 smartwatch me paani chala gaya hai thik karne ka tarika batao aur video banao
Kya karu
Ish watch ka screen phut Gaya hai kitne rupees me lagega
Agar smartwatch ka display tut gaya to kaise sahi kare
Yes!
can you make a video of apple watch. plz :) :). thank you
my chip of paper is Brocken so what I do
You could solder it back on if you had the skill
Cool!!
smart watch put the SIM and no SIM card valid sim