How to properly bleed the coolant system Raptor 700
HTML-код
- Опубликовано: 23 июн 2018
- Cuervo ATV Raptor 700 specialists
951-743-6328 sales@cuervoATV.com
/ cuervoatv
www.ebay.com/usr/cuervoatv Cuervo Racing Raptor 700 specialists
951-743-6328 sales@cuervo-racing.com
m. MrCuervoRacing...
www.ebay.com/usr/mrcuervoracing 
Кино
Always good info here
Should make a bleeder fitting with a barb attachment to feed back into a collection jar.
Thanks for the video. Now I know why my quad did not take all the recommended coolent.
What is that screw called?
I have a 2006 yfz450. Is it located in the same place as the Raptor?
I just put a temp gauge on should I bleed the system? Thanks
What's your opinion of running with or without the thermostat? Some say leave it in as it will cool better by slowing down the flow to give the radiators time do their job...others say remove it and get the most flow possible. I'm terrified of having a thermostat stick closed and cook a motor!!
Any special type of radiator fluid necessary for refilling
Will i need to flush and burp the coolant after changing a stuck thermostat? I’m guessing no but unsure
Great vids Daniel 🖒. I gam a bit of clear tube (of the rite size) in th hole & run it down to a bottle or tray.....no mess & you can see the air comming out 👌.
Shane Wesneski yes. I use that . Doesn't video well due to siphon effect showing more bubbles
MrCuervoRacing. Eh? Sorry I didnt understand that " doesnt video well due to siphon" ?
Thanks for that mate. Knew their had to be a high bleed point somewhere. What is your opinion on using Engine Ice in Raptor 700's?
I just bought a raptor and the reservoir is on low can I just add some to that without bleeding?
What do you think of the engine ice coolant?
Do you have any recommendations for coolent
My bike 2020 is showing high water temp and tgr fan kicks on and runs continuously..would this be due to a bubble in the coolant system..sometimes its seems to be boiling bubbling back into the reservoir
When I’m riding my raptor 700 it blows too much hot air from the engine, could it be that my raptor is low on antifreeze and is a sign of possible overheating if is not filled up with antifreeze?
Have you work on a Yamaha raptor 660 . 700raptor engine fit a 660. Thank for video:)
noel orourke we have. It is a lot of work
Why not use engine ice or evans waterless
Since your using an automotive engine coolant instead of yamalube do you suggest still changing it every two years like they recommend or more like 5-10 years?
I've since switched to amsoil coolant easier to manage and bill. quality and consistency
Thoughts on engine ice coolant? Over rated?
We use Conventional green antifreeze
MrCuervoRacing same
I forgot to bleed it is in my change is this bad
they tend to sort themselves out over time but can cause initial overheating.
Hey just picked up a ‘19 raptor 700. I rode it around the yard for about 15 mins. 2 days later while in the garage I noticed the coolant level was just at above the “o” in “low”. Is that okay or should I add more? Idk if the dealership overlooked this or it’s normal. I don’t see anything leaks. Thanks in advance
its perfectly fine to run it at the low mark. i personally only ever fill them to the low mark when cold. this keeps them from running too full when hot and some expansion happens.
MrCuervoRacing thank you!!
is engine ice good or bad ?
Ever get an answer on the ice
@@chrisrieger9201 yes it's good stuff. I bought some put in my raptor. Just got back from dunes riding 3 days no problems at all.cooling fan for t come on much. And a friend I was riding with has same 2019 700 raptor. His fan come on regular as mine didn't much at all be sure to flush everything out with distilled water twice before putting the engine ice in.
@@poorwhiteboy6521 do you dilute it at all with radiator fluid or fill it straight with all ice
@@chrisrieger9201 rinse it out with distilled water so it's clean of old coolant. Then fill it with ice straight out of the bottle no mixing. One bottle of ice will fill it. You should have just a little extra. Be sure to use the bleed screw on thermostat to get air out. Even when you flush it.
@@poorwhiteboy6521 any brand you recommend
Get to the point