Saya lihat di awal video kancing kuncian sambungan rantai nya terbalik .seharusnya menghadap ke belakang.. Selebihnya keren..saya juga pecinta jenis motor seperti ini...motor idaman👍👍👍
Awesome work. I really like that you include the torque specs. I may have to go over my 03 and use your vid for reference. Also cool to see you have a set of the gold rg3 clamps. I have them as well. Wanting to get them anodized red but the gold is apparently pretty rare.
Lo uso sempre il pistone nn preoccuparti c’è ne ce alza la larmmitta stai sereno a a me che mi è andata l alqua in testa e esce dal scarico e la travasera ❤️🩹🦂
I don’t understand your builds, you spent so much time and money into them just for them to look terrible once done. You have a very weird style where nothing matches especially when your spending money on carbon parts yet cheap out on everything else
I have the 250, but this whole video was just perfect ! I would have went with a 270mm front rotor, but you can tell that you are very experienced at doing these restorations ! 😊
FINALLY SOMEONE WHO DOES A FULL SODA BLAST BUILD AND NOT PAINTING ALL OF THAT IN BLACK, HONDAS LOOK EXTREMELY AMAZINGLY BEAUTIFUL WITH NATURAL ALUMINUM FINISH! BEST ONE IN YOU TUBE AND MY FAVORITE MODEL 2003.🙂❤❤❤👍👍👍🙏 QUICK QUESTION..IS THE FRAME OF THE 125 SMALLER ? I AM CONSIDERING A BUIILD I AM 5'8" PLEASE LMK.. YOU A MASTER CRAFTMAN AT RESTORING BIKES! I SUBSCRIBED😊
Thanks for the kind words! To be correct, many of the parts were "vapor blasted" not soda blasted. In reference to your frame question, the the bottom frame rails are different from 125 to 250 to accommodate the different engines. In terms of seat height, they are pretty similar..
U should start a LLC, costumers pick a year and model, they pay full before u even buy the bike or as soon as they drop it off. Minimum build cost including labor (50/$hour) has to be 8,000$. Anthony panza is doing it with banshees and making a killing
Better than I could do Fix that yellow seat line on 250, the non pipe side Its otherwise 100% I believe the seat takes away though ,but who am I .Honestly brilliant all done yourself if so, to cool for school
Great video but I had to laugh at the huge crescent wrench to tighten the jet in the carb. That's asking to strip the carb threads. Use a small 1/4" drive ratchet or a small wrench does the trick, tight but not too tight. I'm very careful when comes to harder metals threading into aluminum.
Unbelievable detail just come across your channel and subscribed I’ve never seen attention to detail like this even the small things like marking after you’ve torqued a part up
Hello there, I want to express my sincere regret that there aren't more individuals with your level of expertise in mechanics and the arts. I happen to own a 2016 Honda CRF 450R, and I've taken it upon myself to rejuvenate its appearance to a pristine condition. This endeavor has proven to be quite challenging, especially considering my lack of formal skills and a mechanical diploma. Nevertheless, I'm determined to give it my best effort. Your exemplary work serves as an inspiration, and I encourage you to continue your outstanding contributions!
Hi there, thank you for the kind words!! 🙏🏻 🙌🏻 Glad you can appreciate the time and effort it takes for a build. I wish you luck in your 2016 CRF450R build, I'm sure it'll come out nice! 👊🏻 🤘🏻
I get them from my local hardware store. They sell it by the roll. I'm sure you can find it online. It's the 3M _ 4 inch grey rubberized tape 👍🏻 Good luck!
Insane! Your quality of work and attention to detail is truly amazing. I love your videos are one and not a 20 video series showing how to scotch bright a swing arm and frame.
Bike is sick. Work is second to none. But personally the only thing I don’t like is the seat cover. To me it throws the whole build off. But that’s personal taste. Amazing job man
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
![Restauration / Rebuild HONDA 250 CR 1994 Replica McGrath [FULL EPISODE]](/img/1.gif)
Beautiful build but I much prefer the stock seat.
Could you legit race this bike at the track ? Seriously
That’s a talent, you’ve got there. I find it really therapeutic
Saya lihat di awal video kancing kuncian sambungan rantai nya terbalik .seharusnya menghadap ke belakang..
Selebihnya keren..saya juga pecinta jenis motor seperti ini...motor idaman👍👍👍
Please never stop building… beautiful bikes. Seats look amazing!
Nice to see you using conventional grips they worked for decades if it ain't broke don't fix it. Nice build dude.
Awesome work. I really like that you include the torque specs. I may have to go over my 03 and use your vid for reference. Also cool to see you have a set of the gold rg3 clamps. I have them as well. Wanting to get them anodized red but the gold is apparently pretty rare.
Service manual here 👍🏻 at the beginning of each section there’s a diagram with torque specs
Lo uso sempre il pistone nn preoccuparti c’è ne ce alza la larmmitta stai sereno a a me che mi è andata l alqua in testa e esce dal scarico e la travasera ❤️🩹🦂
love the ending they re coooool bikes
You had me until you put the dreaded important information sticker on that is hard to take off........
That’s the best part of the build 😂
Shout out to Mx Bonz on the Air boot he’s a local legend at my home track
Agree! Makes awesome products
That is amazing love it ... awesome build ! Seat cover tho ! 🤮
So sick bro instantly subbed I'm not sure why I haven't stumbled upon this channel earlier. Really makes me want to rebuild my 01 KX250.
Thank You! You should definitely rebuild it! It will be worth the ride 😎🤘🏻
The way that these are filmed and the craftsmanship on the bikes are better than any other builder on RUclips. Keep it up.
Wow, that is a high compliment! Appreciate it!! 😇 🤘🏻 More to come too!
A Wó250🏍💪🏻😲
Stupenda.... ❤... Io ho un 2004 cr..... Mi piacerebbe farla con gli stessi colori... Il copri sella è gli adesivi di che marca sono...? 🙏
Классная работа. Результат огонь 🔥
I don’t understand your builds, you spent so much time and money into them just for them to look terrible once done. You have a very weird style where nothing matches especially when your spending money on carbon parts yet cheap out on everything else
I have the 250, but this whole video was just perfect ! I would have went with a 270mm front rotor, but you can tell that you are very experienced at doing these restorations ! 😊
Siiiiiiiiiiiiiick
What is better than one rebuilt CR? Two matching rebuilt CRs. Nice work Scrub!
Thanks! Glad you enjoyed! 👊🏻
Bell restauro
Hey! I like your video’s. Is there some sort of manual how the parts are fit together?
Doesn't this qualify as a car wash basically? Guy just cleaned
Very nice engine rebuild.. do you happen to vapor blast for a price?
Love your work! What is the 3M product # for the frame tape?
Thanks! The tape is 3M - 4inch grey antislip. Comes in a large roll. Trim to spec 👍🏻 Good luck!
How much would that rebuild cost your time and parts?
Mua luôn một chiếc xe máy cao cào
FINALLY SOMEONE WHO DOES A FULL SODA BLAST BUILD
AND NOT PAINTING ALL OF THAT IN BLACK,
HONDAS LOOK EXTREMELY AMAZINGLY BEAUTIFUL WITH NATURAL ALUMINUM FINISH!
BEST ONE IN YOU TUBE AND MY FAVORITE MODEL 2003.🙂❤❤❤👍👍👍🙏
QUICK QUESTION..IS THE FRAME OF THE 125 SMALLER ?
I AM CONSIDERING A BUIILD I AM 5'8"
PLEASE LMK..
YOU A MASTER CRAFTMAN AT RESTORING BIKES!
I SUBSCRIBED😊
Thanks for the kind words! To be correct, many of the parts were "vapor blasted" not soda blasted. In reference to your frame question, the the bottom frame rails are different from 125 to 250 to accommodate the different engines. In terms of seat height, they are pretty similar..
Looks good. I cringe when I see a wiesco crank.
I agree, all that time and effort. If you're going cheap go hot rods or open the wallet and use what they were engineered to run....OEM
@@gordis1623 Sadly new 03 OEM crank is not easily found like the 05-07.
U should start a LLC, costumers pick a year and model, they pay full before u even buy the bike or as soon as they drop it off. Minimum build cost including labor (50/$hour) has to be 8,000$. Anthony panza is doing it with banshees and making a killing
The problem is you can buy a brand new one for less which is better, the only way I can see this working is if they are raffled off.
Bunch of emissions sensitive turn costs. Fantastic job tho
How much did the parts total cost? parts are not cheap
Better than I could do
Fix that yellow seat line on 250, the non pipe side
Its otherwise 100% I believe the seat takes away though ,but who am I .Honestly brilliant all done yourself if so, to cool for school
Song during startup at like 19:00?
Nice job, l have one that is like new. What new crank did you use OEM 05-07 ?
You have the best engine restorations I have ever seen!
Thank You! Appreciate it!! 🙌🏻
Great video but I had to laugh at the huge crescent wrench to tighten the jet in the carb. That's asking to strip the carb threads. Use a small 1/4" drive ratchet or a small wrench does the trick, tight but not too tight. I'm very careful when comes to harder metals threading into aluminum.
Unbelievable detail just come across your channel and subscribed I’ve never seen attention to detail like this even the small things like marking after you’ve torqued a part up
Amazing but the stock seat is better
Muito top ai sim parabéns 👏👏👏
Rebuild a 1989 cr 250
Hello how many time are you do it ?
Where do you buy all the parts?
love the bike but.. ugly seat
Hello there,
I want to express my sincere regret that there aren't more individuals with your level of expertise in mechanics and the arts. I happen to own a 2016 Honda CRF 450R, and I've taken it upon myself to rejuvenate its appearance to a pristine condition. This endeavor has proven to be quite challenging, especially considering my lack of formal skills and a mechanical diploma. Nevertheless, I'm determined to give it my best effort. Your exemplary work serves as an inspiration, and I encourage you to continue your outstanding contributions!
Hi there, thank you for the kind words!! 🙏🏻 🙌🏻 Glad you can appreciate the time and effort it takes for a build. I wish you luck in your 2016 CRF450R build, I'm sure it'll come out nice! 👊🏻 🤘🏻
Что за матирьял на 11:12 минуте?
Is this mechanic for hire?
I dont know why everyone keep the same seatfoam?!? I dont want to sit on couch
Where did you get the 3M Grip frame material ?
I get them from my local hardware store. They sell it by the roll. I'm sure you can find it online.
It's the 3M _ 4 inch grey rubberized tape 👍🏻 Good luck!
@@MotoScrub By any chance Do you have the 3M product number ? I'm trying to find the correct one in ebay but there is a lot of variety
CR e a motoo❤ mais top
Do a 2000/01 cr250 next
Mantap
Nice builds Johnny! Ryan sent me some pics of them complete they are beautiful.
Serviço de profissional as motocas ficaram novas 0 km
Toss the mikuni carb, put in a keihin pwk carb in it.
Grande máquina ❤
It is a perfect job, it is a lot of inspiration for everyone.
That seat… nice builds and content regardless
Great videos!!! Your attention to detail is awsome!!
Sempre una passione che viene dal ❤cuore usa la testa la sto usando come dite voi .
Better than porn. Thank you so much for the vid
😅
😮😊 $$$$$$ fantastic!
Man, i enjoy watching your work so much. I think you did some kind of mechanic art with your builds. Keep going on! Best regards from germany. ✌
Thank You! 😁 Appreciate you watching all the way from Germany! 🤘🏻 🎨
Are you using glass in your vapor blaster?
Yes, glass beads in the vapor blaster!
Сколько стоит?
Sound ??????
this has to be youre cleanest buildZ IMHO bro freaking INSANE IN THE MEMBRANE.
haha. Thanks! 👊🏻🙌🏻
Insane! Your quality of work and attention to detail is truly amazing. I love your videos are one and not a 20 video series showing how to scotch bright a swing arm and frame.
Appreciate the kind words 😁 Glad you like it!! 🙌🏻 👊🏻
nice 😍😍
so cute
This is my dream carrier
Nice
Well done 👏👏what a job best I've seen yet for attention to detail and overall quality absolute A1 top class build 👍👍 love it
Thank you for the kind words! 🙌🏻 🙏🏻 More coming! 👊🏻
Where did you get the seatcover?
Parts are given to me by the customer. But the seat is from "Moto Seat". Good luck! 👍🏻
Just like I want it 😍😍😍😍
Beautiful craftsmanship
Cost of total rebuild???
👍👍👍
A moto ficou linda parabéns.
I want that 250r BAD!
What rear sprocket are those ?
Talon, they make the gytr sprockets for the yamahas too. Same design. Sick stuff and ultra light
Bike is sick. Work is second to none. But personally the only thing I don’t like is the seat cover. To me it throws the whole build off. But that’s personal taste. Amazing job man
Amazing re build. Thanxs for keeping the 2T Alive. 😎👍
Thanks! 😎🤘🏻
where are the films for the frame protectors?, they are wonderful!
They are from 3M. The 4 inch wide grey rubberized tape 👍🏻
GOLD RIMS!!! 🤩
True work of art!!
Holy Hondas!
Gold🫶
They both turned out better than new. Who does your graphics?
I think they’re just stock graphics
They are replicas from "Dare Decals USA"
Instagram: @dare_decals_usa
Good luck! 🤘🏻
Insane build 💯💯
Skills that pay bills awesome build
Thank You!! 🙌🏻
Amazing work!
Thank you! Cheers!
Beast... the best
Thank You! 🙌🏻
Awesome stuff man
Appreciate it! 🙌🏻
This is art.
Thank You!
Good job💪
Thank you! 😊
Not a bad effort, seat covers and swing arm stickers let the build down in my opinion.
That seat looks terrible, also the yellow rims don't suit crs. Black or silver would've been heaps better.
Душевная терапия 👍😊