Thank ypu for this video, i watched another pne and they were saying you had to remove the front bumber to change the radiator, it was on a 05 but they are üretty similar looking . Appreciate the fact you read coments, answer them and even hive more advice. Your awesome!
Muchas Gracias por en video!!!!!!! Muy bien explicado y sencillo. Amabamos de cambiar el radiador y quedó de maravilla Gracias a ti. Un abrazo y bendiciones.
Paid im sure alot of money got cheap aftermarket and not even the correct coolant but hey I did this job so this didn't happen to me the job isn't so fun
Thanks for the video. Can we swap the transmission cooler lines to the radiator? Which transmission cooler line goes to the top and the lower lines of the radiator?
Amazing work, thanks for making a video. Question: I have 2006 Sienna looks similar to your; I am trying to find the heater hoses to flush and I have no idea where they are. Again thanks for your time.
hi and thanks for visiting my channel. stand in front of the sienna, to the right in the fire wall you will see the 2 heater core hoses kind of close to the throttle body, these 2 hoses are the only ones that go inside the fire wall.
2006 sienna has cold AC but no heat; I am trying to fix it. The radiator and reservoir is full. What is steps I need to take to diagnose the system. Thanks
@@davidruiz5383 first check the blend door actuators, open the trim panels right side of your feet when u are driving, once you see the actuators turn on the van and the heat while watching the actuator and see if it moves, if it does not move it might be damaged or there might be an electrical problem, now if it does not move you should have the same problem on the passenger side. there are more things to check but this is the most common one.
Hello JM are there bolts holding radiator on the bottom. Mine will not move. Im not sure i caught that part. I saw the bolts from the fan but are there bolts on the bottom just like the top 8 mm bolts. I will have to look under but when i try to push it off it moves with the other radiator.
I guess I do have a USA built so I need to unbolt 4 more bolts from the bottom and the 2 rusty screws. Its already giving me a hard time. Whew. Thank you! I am not sure if l be able to unscrew the 2 rusty ones just like the top. Should i just bend it too? I'll have to figure something Thanks again for the quick rep! 🙏
Thanks again JM. I have a question. I made a mistake. I tried to unbolt the AC condenser and doing so one of them released pressure. Do you know what I just did? Is that the AC freon that leaked? Thank you so much!
@@JwillcdCdc I think you unbolted a bolt that is not supposed to be unbolt with out evacuating or discharging the freon first but all you got to do is recharing again to have A/C, freon is so bad so hope it did not go on your skin, hope you are fine othere whise look for asistance, thanks for sharing
I have toyota sienna 2006. I replaced the lower cooling hose which had a hole and it was leaking. When I removed the old hose some coolant run down. I added a bit coolant from plastic tank but it did not take much. After I drove the vehicle and the engine overheated quickly. Do you recommend the same way you did to let the air out of cooling system?
you add coolant on the radiator not on the reservoir to make sure the radiator is full and add some on the reservoir if it needs to, but dont go over the maximum, and bleed out the air until no more bubles come out, hope this helps.
Primo donde está localizado? Tengo un 06 sienna ya le cambia la bomba de agua, thermostato con uno original, rayador, y ya sellé el plato de agua, Después de llenar y correr se sale toda la agua por la reserva, se calienta porque tira todo el coolant
ola primo como le ba y gracias por su interes, pues nose donde esta usted localisado pero cualquier cosa estoy a la orden pues me encanta trabajar en carros. vendicines a usted y familia.
Thank ypu for this video, i watched another pne and they were saying you had to remove the front bumber to change the radiator, it was on a 05 but they are üretty similar looking .
Appreciate the fact you read coments, answer them and even hive more advice.
Your awesome!
thanks for the time to watch my videos, you dont need to remove bumper to replace radiator 04-06 sienna, it is a very easy job.
Thank you for great video, you make it look easy and helped me to fix mine!
thank you
Thanks for taking the time-consuming to put this great video
thank you for your beautiful comment I really appreciate it.
Thanks for the video. Keep doing more. I’m gonna subscribe 👍🏽
thanks for the sub I really appreciate it.
Muchas Gracias por en video!!!!!!! Muy bien explicado y sencillo. Amabamos de cambiar el radiador y quedó de maravilla Gracias a ti. Un abrazo y bendiciones.
Btw tenemos una sienna. Si puedira poner los videos por categoría de auto en Playlist seria mágico. Gracias nuevamente
Gracias por su bonito comentario eso me ayuda mucho vendiciones.
@@milly6441 ok tomare en cuenta eso d categoria y gracias por su sugerencia
🤣 sorry por el spell correction. Era " "*Acabamos" y la otra "*magnífico"
You did a Very good job
thanks you for your comment.
Great video amigo! Gracias.
gracias por visitar este su canal.
great job my friend charge the customer good money.. tools are expensive..
hey Erick im glad your friend did a great job,
Paid im sure alot of money got cheap aftermarket and not even the correct coolant but hey I did this job so this didn't happen to me the job isn't so fun
Thanks for the video. Can we swap the transmission cooler lines to the radiator? Which transmission cooler line goes to the top and the lower lines of the radiator?
if you stand in the front of the engine the one to the left hand side is the upper one on the radiator
Thanks for the great video! Question: what are the two small hoses on the radiator for? Transmission oil or coolent ? Thanks!
thanks for coming to my channel, they are transmission cooler lines.
Amazing work, thanks for making a video. Question: I have 2006 Sienna looks similar to your; I am trying to find the heater hoses to flush and I have no idea where they are. Again thanks for your time.
hi and thanks for visiting my channel. stand in front of the sienna, to the right in the fire wall you will see the 2 heater core hoses kind of close to the throttle body, these 2 hoses are the only ones that go inside the fire wall.
Can I check the heater lines inside the van before taking off the parts to reach the wall. If I can, how. Thanks
@@davidruiz5383 what are you trying to do, flush it or replacing it? you can work under the dash first if you are going to remove it.
2006 sienna has cold AC but no heat; I am trying to fix it. The radiator and reservoir is full. What is steps I need to take to diagnose the system. Thanks
@@davidruiz5383 first check the blend door actuators, open the trim panels right side of your feet when u are driving, once you see the actuators turn on the van and the heat while watching the actuator and see if it moves, if it does not move it might be damaged or there might be an electrical problem, now if it does not move you should have the same problem on the passenger side. there are more things to check but this is the most common one.
Hello JM are there bolts holding radiator on the bottom. Mine will not move. Im not sure i caught that part. I saw the bolts from the fan but are there bolts on the bottom just like the top 8 mm bolts. I will have to look under but when i try to push it off it moves with the other radiator.
If you have the USA built then you have to unbolt it from beneath and bolt it with the A/C condenser
I guess I do have a USA built so I need to unbolt 4 more bolts from the bottom and the 2 rusty screws. Its already giving me a hard time. Whew. Thank you! I am not sure if l be able to unscrew the 2 rusty ones just like the top. Should i just bend it too? I'll have to figure something
Thanks again for the quick rep! 🙏
@@willyd6335 those 2 are always rusty nothing happens if you bend them, they can't really be taken out because of the rust, thanks for sharing.
Thanks again JM. I have a question. I made a mistake. I tried to unbolt the AC condenser and doing so one of them released pressure. Do you know what I just did? Is that the AC freon that leaked? Thank you so much!
@@JwillcdCdc I think you unbolted a bolt that is not supposed to be unbolt with out evacuating or discharging the freon first but all you got to do is recharing again to have A/C, freon is so bad so hope it did not go on your skin, hope you are fine othere whise look for asistance, thanks for sharing
I have toyota sienna 2006. I replaced the lower cooling hose which had a hole and it was leaking. When I removed the old hose some coolant run down. I added a bit coolant from plastic tank but it did not take much. After I drove the vehicle and the engine overheated quickly. Do you recommend the same way you did to let the air out of cooling system?
you add coolant on the radiator not on the reservoir to make sure the radiator is full and add some on the reservoir if it needs to, but dont go over the maximum, and bleed out the air until no more bubles come out, hope this helps.
@@JM-AUTO thank you so much for your quick response, I will try tomorrow and let you know the result
Primo donde está localizado? Tengo un 06 sienna ya le cambia la bomba de agua, thermostato con uno original, rayador, y ya sellé el plato de agua,
Después de llenar y correr se sale toda la agua por la reserva, se calienta porque tira todo el coolant
ola Primo estoy en New York en q Stado esta Usted?
Can i put transmision from higlander 2004 3.3 on my sienna 2005 3.3 same ingene help o wich other fits
Thank you good video
thank you and stay bless.
Primo como va todo. Tengo una sienna del 2005 y le quiero hacer varias cosas. Tu Estaría disponible para hacer el trabajo?
ola primo como le ba y gracias por su interes, pues nose donde esta usted localisado pero cualquier cosa estoy a la orden pues me encanta trabajar en carros. vendicines a usted y familia.
@@JM-AUTO gracias e igualmente. Yo estoy en el Bronx.
@@EdwininfanteLeocadio pues yo estoy un poco retirado estoy en long island pero agradesco mucho el interes.
@@JM-AUTO si se donde estas, no es molestia ir aya.
@@EdwininfanteLeocadio pues yo estoy en brentwood nose si quisiera venir
Is there a coolant bleeder valve on 06 sienna
no there is no bleeder for the coolant system. thanks for visiting my channel.
@@JM-AUTO figured that I didn't see any. Welcome thanks for taking your time to share
Una pregunta no es necesario prender el calenton?
no Amigo no es necesario, solo asegurar se que ya no salgan mas burbujas del radiador
You forgot to put the 2, 10mm bolt back on the upper radiator support, the ones behind the front grill?
No i did not i put them back but thanks for your comment
Did not relize i was not recording when put them back
@@JM-AUTO you made a good video, some guys remove the whole front bumper, but that is not necessary at all.
@@brucewayne2773 thank you and God bless you
I didn’t bleed out the air my temp gauge rises
yeah some times that happens, thanks for sharing.
How do I bleed the air out no bleed valve
Gracias amigo
you welcome and thanks for visiting my channel.