Bro. You are super talented electronic technician, you are on the top priority list, the videos I watch. Whatever project you take up, you execute it brilliantly. Good luck bro.
I did the entire same process, every time my chip (tp 4056) damaged when I connect charging jack. I tried 3 times and it happened same. Now I have ordered one more and this time I will directly charge without using charging jack.
I would like to know where to get the micro usb socket to two pins + & - obtain it from? Thanks. I like the way it gives more choices where to locate the pcb in the zapper's body.
Bro as far as I know the bat circuit has charging module for the company battery and you are connecting that charging module wires to the TP4056 circuit's charging part. Will not it affect the battery??
Bro I have one doubt old battery lead acid 4 volt, New li ion battery 3.7 volt , bridge rectifier already used in this circuit also convert ac 230V to DC 4V but why you're change another new circuit, 0.3 dc Volt low or li ion battery use it's correct or wrong answer please reply me. Same circuit use or not use, wen possible only li ion battery only replace the bat
Bro first u make a video of scrolling display using Arduino nano I tell this video title is SMART PHONE CONTROL RGB SCROLLING TEXT DISPLAY LED MATRIX please check bro but I problem its code is not working please bro recorrect the code correctly I always support you channel please bro
Bro. You are super talented electronic technician, you are on the top priority list, the videos I watch. Whatever project you take up, you execute it brilliantly. Good luck bro.
I did the entire same process, every time my chip (tp 4056) damaged when I connect charging jack.
I tried 3 times and it happened same.
Now I have ordered one more and this time I will directly charge without using charging jack.
I had already done it. The MOSQUITO KILLER became more powerful and the battery life was tremendously increased.
👍
Most welcome
pro trick: watch movies at flixzone. I've been using them for watching loads of movies during the lockdown.
@Judah Keith Definitely, been using Flixzone} for months myself :D
@Judah Keith Definitely, I've been using flixzone} for years myself =)
Can we use 9v battery
Please add some voice as to where you are connecting the wires to the pcb. I am a mechanical guy.
Are they 3mm led's for charging indication?
Why didn't you use the same red led which you removed from it.
Awesome 👍😊👌 bro keep it up and love from BANGLADESH 🇧🇩🇧🇩🇧🇩
Thankyou
@@easytechzones welcome
I would like to know where to get the micro usb socket to two pins + & - obtain it from? Thanks. I like the way it gives more choices where to locate the pcb in the zapper's body.
Can you connect the charger to the tp4056 or the usb socket really necessary?
You are very creative sir.
Thankyou
Can I use module input charging port directly for charge? Please help.
bahut acha banaya ab fekna nahi padega.
Bro as far as I know the bat circuit has charging module for the company battery and you are connecting that charging module wires to the TP4056 circuit's charging part. Will not it affect the battery??
Bro I have one doubt old battery lead acid 4 volt, New li ion battery 3.7 volt , bridge rectifier already used in this circuit also convert ac 230V to DC 4V but why you're change another new circuit, 0.3 dc Volt low or li ion battery use it's correct or wrong answer please reply me. Same circuit use or not use, wen possible only li ion battery only replace the bat
In this circuit charging will done by mobile charger. Also bypassed the 230v bridge section. Actually battery connected with dc section
Please tell us🌹
very nice! i have the some vedio ,but your's better than me!
Thankyou
Does it have a charging protection life bms?
Bhai direc lead acid battery hata ke li ion laga de toh kya hog?
Great videos! I make videos too but I have to say these are very good!
background music demeans your effort,...
Bro you kept an usb female pin for charging. what is it name pls reply 🙏🙏🙏
micro usb port
Very nice and useful video 👍
Amazing project,very good
I want this bat, where to purchase?
Bhaiya what care should we take while doing like this. I am afraid but want to do so my mom will not scould me to bring new mosquito bat 😅😅.
Great full ideas
Nice brother 👍👍👌👌
Bro. Some people not use this charging module so is there any problem???
No problem. You can use
Good idea
Thankyou
Sema idea bro👍
Can i use Lithium ion battery without useind charging modules
I have installed lithium ion battery same like this by using tp4056 module, but its not working may i know the posible reasons??
Amazing video dada
#Electronicsorelectronics
Thankyou
Ok bro now are completely making a new thing.
Dada amar bari kanchrapara to Amakya aktu hint daooo ami kon electronic shop yay bo motor patya pari ??
Bro first u make a video of scrolling display using Arduino nano I tell this video title is SMART PHONE CONTROL RGB SCROLLING TEXT DISPLAY LED MATRIX please check bro but I problem its code is not working please bro recorrect the code correctly I always support you channel please bro
Great video 😀👍👍
Can we charge lithium battery with same led acid module charger ? Any risk if charge ?
No. It would burn some components especially the transistor and if not burn, then it wouldn't charge at all
or just charge straight from usb charger and add the led indicator to usb cable
Sir Arduino me program bannane ke liye konsi laungauge shikani chahiye
mast
Thank you 😃
That's amazing 👌👌👌
Thankyou
Details do kon konsi items use kiyiho
Isme lithium battery kharab nhi hota hai kya 😊
Mobile charger me to 5v nikalta hai aapke charger Mein 2v nikala hai
Sir, your adapter not giving 5 volts.
This is power bank. So showing 2.8v but when start charge it will give 5v
@@easytechzones Ok Sir
can we replace battery with same terminals without charging module ?
no you can't because the battery charger that is built in the circuit is configured for lead acid or distilled battery not for li ion battery
Awesome dada
exellent 👍👍👍❤❤🇦🇿🇦🇿
Thanks
❤
Thanks🥰🥰🥰
Welcome
Sweetheart and cool content bro
We have to use .. the android charger for this or...We can directly connected into the AC board like most badminton get it's charging
I tried before but i think it charges slower
what is the volt of li ion battery u replaced?
3.7 v
Old battery was 4 v, then 3.7 v lithium possible?
Its possible and it is far more powerful because lithium batteries can provide more amps then the lead acid one
@@chicha9630 can we use 9v battery
Dada ami konnagar yar kon electronic shop aya bo motor pabo ??
Melodi
""Any School College Student here......
I am
Yeah ☺️
🤬
Nice 7
Thanks
God nice
Mera lithium battery kharab ho Gaya tha mosquito killer me 😢
Tp-4056 module lagaya tha?
I thought mine broke it didn’t
इतना करने में कितना खर्च आएगा
Bravo bravo bravo
Super
Love it
Very difficult to make.
👍👍👍👍👍
🙏
Cuối cùng cũng có người Việt Nam
@@Vvanphuong98 dạ chị người VN ở khắp Thế giới chị nhỉ, ủng hộ kênh em với nhé, thanks chị nhiều ạ, chúc ngày mới nhiều niềm vui bên GĐ ạ
ভাই কারো কাছে চিকন পিনের চার্যার হবে ?
শব্দ দিয়ে মরো কেন?
45 like
Thanks
@@easytechzones 👍👍👍
First view
Thankyou