How to register an ILLEGAL car in the US
HTML-код
- Опубликовано: 25 авг 2024
- Jumping the General Lee - • $4.5 million for 3 sec...
Travis found & restored Lee 1 - • We found the 1st Gener...
Recreating Blues Brothers stunts - • Cops will let you do a...
Travis Bell is the owner of Celebrity Machines (celebritymachi...) and a lover of strange cars. When he saw the Pontiac ST and the Holden Ute, he had to own one in the US. Here's how he did it.
Be sure to check out Vincero's new watches and sunglasses and get 15% OFF your entire order when you use: vinwiki.com/r/...
VINwiki on iOS - vinwiki.com/ios
VINwiki on Android - vinwiki.com/an...
VINwiki Merchandise - store.vinwiki.com
Please support all of our 2020 Sponsors:
AutoTempest - vinwiki.com/r/...
Premier Financial Services - vinwiki.com/r/pfs
Exotic Car Hacks - vinwiki.com/r/ech
Dream Car Xchange - vinwiki.com/r/dcx
The Ticket Clinic - vinwiki.com/r/tc
AvalonKing - vinwiki.com/r/...
Obsessed Garage - vinwiki.com/r/og
GlassParency - vinwiki.com/r/gp
XtremeXperience - vinwiki.com/r/xx
Vincero Watches - vinwiki.com/r/...
Lux Rally - vinwiki.com/r/...
AP3 Paint Protection - vinwiki.com/r/ap3
ESOTERIC Fine Detail - vinwiki.com/r/...
Honey - vinwiki.com/r/...
Support the Cannonball Memorial Run - vinwiki.com/r/cmr
Support the Brock Yates Memorial Fund - vinwiki.com/r/...
#Holden #HoldenUte #ImportingCars 
Авто/Мото
We stole your LS engines for the commodore.. now you are stealing the rest of the commodore.. fair tackle, play on
they are gonna steal our barra's now aswell lol
secretRBRman for real tho
secretRBRman and show them what a real engine’s like 💪🏽
@@secretRBRman BARRA THE WORLD
@@secretRBRman well now we have adamlz with his bad ass barra swapped mustang. so yea i guess so. sorry m8 good engines
"but he still wrote me a ticket to my 2009 Holden Ute.... and the ticket clinic took care of that"
by far the SMOOTHEST plug ive seen.
It isn't even sponsored by them, and they still got plugged.
@@connorstohl6050 that’s because it seems like they only do sponsorships with companies they trust/use. You hear them mention their sponsors a lot in videos just off the cuff. Nice to see instead of people who just take money from any company as long as they pay.
Holy crap! An American that actually knows and got most of his terminology right while talking about Aussie cars! Someone buy this man a Fosters! Not that we drink that shit here. Great content, love the fact that an Aussie ute made it on this channel!
You lost me when you mentioned "Foster's", you were going well until then.
@@Rob-fc9wg you probably should have read the next sentence then...
@@simmo7670
Sorry mate, I was too busy chunderin' at the thought of Foster's.
Fosters?!!! I haven't seen Fosters in Australia for 25 years. There's a good reason for that.
i have a rebranded holden its the caprice holden. its a chevy by name alone. love this car you aussies have fun cars. strong too killed 3 deers with it only 1 really damaged the car all deers are dead from either running into the side or running in front. 2 in the front 50mph and 60 mph the side it just ran into the side breaking its own neck. deers are stupid any ways the 60mph one did the damage fender door and light.
As an Australian who's driven Holden Commodores most of my life this makes me cry.
Thanks for naming and badging it right mate. Nothing more tragic than someone badging up a Holden as something else GM.
The death of Holden and the loss of the Commodore still hurts. Wish I had never sold my '04 SS now....
Wish I hadn't had that dream I was driving when I was driving my VL wagon. Pine hedge doesn't need to be very big to eat your car
You know what will ease the pain of losing your 04 SS, getting a VE series 2 SS
@susser with recent fuel price increases im not so sure anymore. Running a big thirsty V8 today sounds fun but hard on the wallet lol
@@lesliegossner681 ya only live once, my VE SS ute when in cruise mode uses hardly any more petch than my old v6. But I suppose the addiction to that roar when gunning it changes that, but I also don't want to be on my death bed thinking "bugger I shouda got that SS
In Australia, these things are everywhere. Cannot believe the effort to get one into the US!
As an aussie, I will vouch for him
Same. Did he say 40g?
40k USD. Wow. Pick one up with high kms for under 20k AUD these days.
That's America for ya
@@LitchKB for a ss. Imagine how much they would would pay for a maloo.
I’m impressed how accurate and how well he articulated our lingo and laws here in australia
Man definitely did extensive research before going ahead with the whole project. Respect...
Love the number plate ( CRIKEY M8 )
We definitely don't call the hardlid the tray 😂
Style side tray and drop side tray. And if you're fancy and want the F100 look a step side tray. The lid is just the lid and a tonneau cover is the soft black cover.
@@YosheetaBoneeta and what's on that ute is a tub
Makes me proud to see our Aussie cars getting so much love in the USA.
The fact that 50 Cent never got his either is the saddest part of the story. RIP 50 Cent :(
he didn’t die tho
@@tfreposan6081 its a meme boomer
@@kinpump4696 bro what is ur name?
"For cheap, we got a body into the United States on a container." VinWiki music plays
was it cheaper to put it on the container than in it?
Not sure how much he paid for that body. We have worked with David on importing a few for him as well as other clients. Cheapest one I have seen imported landed cost was 5,300 it was missing the front fenders and hood. Typical landed cost is around 7,000 or so.
@@VA-ng2ve are you in the shipping business?
@@GS-cy8iy Yes. We import/export to and from Australia.
lol
I love seeing the joy that our home grown vehicles make on the other side of the world.
*R.I.P* Holden
Holden just selling Opel's from germany similar to Vauxhall in Britain and Pontiac in the US
@@YellowAstra no
@Yuck Foutube no
@@YellowAstra no
@Yuck Foutube yes it was it was started in aus and then gm bought them
Nothing like a good old aussie Ute to tear up the streets with
You guys would love the Holden maloo
I want the Maloo so bad. American laws suck..
Just looked up and yes I do
@@adamhawk160 You guys out to search the 2017 HSV GTSR Maloo. 635HP, enormous brakes, a ute. :D
@princewish now look up W427 . . .
Personally I’m a huge fan of the Monaro.
Ok, so I researched the Maloo. You’ve convinced me.
09:26 - As an Aussie I love your "CRKEY M8" licence plates.
I think the 2009 Ed needs to live.
Fully depreciated by now
@@VINwiki I guess we need to have rabbit sale it so we can make some money.
The Ford Falcon (ED) was a full-size car that was produced by Ford Australia from 1993 to 1994. Ford Australia ahead of it's time.
@@VINwiki call it the 2009 Ed Bolian and you'll get any price you want for it.
I love that Travis is using the correct Australian terminology and lineage of the cars.
ADM is the new JDM 🤔
@@sir.funking Uhhh no way. ADM is ADM. You cannot call Australian cars Japanese.
Nihal Shroff Thats the joke
@@KuroRyuu86 He wasn’t doing that at all?
@@KuroRyuu86 exactly u cant call an american poniac a holden its wrong
And then GM killed Holden. All over.
It was once said by an executive "GM isn't a car company, it's a Bank, that sometimes makes cars". Looking at their history and reputation I have to agree.
I think it was the government more than GM. Every car cost taxpayers 7 grand or something to subsidise so why bother? Correct me if I'm wrong but I guess GM weren't going to fit that bill.
@@spateri728 Got a reference for that? I dont think its true. But it was closely followed by bailing out of all RHD countries world wide, to focus on their larger and more profitable LHD markets. Holden wouldn't have survived that, regardless of local politics.
@@antus666 It wasn't quite 7k i think it was 5k AUD. Motor did a article when it happened if you go look for it
Why did it get killed?
Awesome to see Holden alive in the US as well, thank you for keeping the name and badges 👊
Absolutely love the 'CRKEY M8' registration
That term is like "throw another shrimp on the Barbie" and fosters, mostly used by people outside of Australia
@@W0rp3D Well Aussies dont drink Fosters. Its now VB
@@fantasticmrnox you can keep that cats piss too, don't know how people can drink that shit, great northern or corona for me
@@W0rp3D criticizes VB and then willingly admits to drinking Corona....facepalm!
@@johncarey4040 you're either not a beer drinker, never had vb or just have really shitty bogan taste in beer
I need to find a way to do this with the V10 TT Audi RS6 Avant.
I didn't know I needed that so badly until right now
I have always been a fan of the RS6 V10s but believe the sedan looks MUCH better! Either way an Audi sedan with awd and a gallardoesque v10 with twin turbos slapped on...what’s not to love!
Hi Ed, just wondering if they ever sold the S8 version in the USA. They should have the same drivetrain. Chances are that the body could be swapped just like what was done with the G8 to ute conversion.
Step 1) Move to England.
Seems totally possible... The RS6 is just an A6? Isn't it just like an engine swap?
Absolutely loved the effort you made to create a LHD VE SS UTE. Also loved the knowledge you have for Holden. It makes me so sad that GMA is over. Thank you for the video.
I appreciate how you kept the Holden badges on it, now that Holdens R.I.P and turned re-badged Opel.
"Killed Pontiac in 2010" and GM killed what was left of Holden in 2020. Although by then it was a mercy killing.
Mate, i saw one of the new 'Commodores' on the road yesterday and thought it shouldn't have even got to that point. it looks like a bloated Camry.
Adrian Collins you mean that rubbish rebadged Opel? Couldn’t agree more, would get a VF any day over that
They killed Holden the day the Adelade plant was closed.
When they were turned into a Daewoo importer it was time to go.
@@adriancollins60 aye, you can put as much lipstick on a pig as you like, but it's still a pig.
RIP Holden, a real tragedy that the brand is shutting down
That's GM for ya. Kill all the good brands Yet Buick and Cadillac soldier on as Chevy sinks further into mediocrity
when they killed the factory in Adelaide in 2017, its when us locals stopped calling them holden as they became imports... I dont recognise a 2019/20 commadore as a "holden". I am pissed off what they said about the factory shut down, "will be able to lower the cost of the commadore by a few thousand dollars for the average consumer" but thats a load of shit. I am pissed at GM for doing this to australia and they can get fucked royally for killing one of the last car manafacturing facilities left in Adelaide. RIP a true icon.
@@RageUnchained gotta blame the buyers dude, if they wanted half decent cars we'd still have brands
And now everyone things their holdens are worth triple
@@maxnovakovics2568 "if they wanted half decent cars..." Uh, they're GMs.
I find this absolutely fascinating how rare these are in the states, yet in Australia they’re everywhere. My girlfriends brother has a VE Sv6 so the V6 version as his car on his P plates (First year with a real license) and he picked it up for around $10K AUD so 6.6K USD
I picked up the exact same car for 1500 in nz a couple of months back, had a little panel damage and ended up being a paddock car real fast... probably break travis' heart haha
Here in Australia , the start of the Commodore ( Known as a VB) was an opel sedan. They stuck a straight six banger in it (for most of the population) and also a 'Star Fire' four cylinder (just lopped two cylinders off the six, for the scrooges) and shoehorned a 'Five litre' 308 ci also a smaller capacity 253ci V8's into the same body. The later VC Commodore only came in V8 ,6cyl, and the misfire four (starfire four). Then they produced the VK Commodore once again with the 5 litre V8 the new (Blue motor 6cyl and the asthmatic 4cyl). The next was the VL produced with a normally aspirated 6 cyl or a turbo of the Nissan motor , no V8 due to the fuel crisis . They then released the VN with the old five litre (308) and the Buick V6 3.8 litre. Later V8s were the Chevy V8s.
Thank you for not putting a Chev badge on it!!
Ironically everyone in Australia puts Chevy badges on their Holden's.
gav240z rip
Aussies should put Opel badges on their Commodores that would be so rad
@@wsx2000lol Yes, lets put the least cool emblem on the car.
@@gav240z i very rarely see that mate. I respect chevy as a brand but people who look at a holden and say its a chevy piss every Australian off
Practically taking a page out of Ed Bolian' book, he didn't give up and found a legal loophole to get the job done!
If you're using the firewall and everything forward of that from the G8 and put it in the Ute, it's using US compliant drivetrain as well as front crash bar. That's why the US government doesn't bother with the Holden Utes
And GM killed Holden. Makes my heart warm to know that there are aficionados in the US
Here in Germany HOLDEN is called OPEL. So at least some Holden models can survive under another brand. For example the Opel Insignia, which is a Holden in the original. It is still offered as sedan and station wagon, unfortunately not as a UTE. (For Europe of course LHD)
But it feels good to know that the "lions are still roaring."👍🏼👍🏼👍🏼🇦🇺
Holden isn't Opel in Germany. GM used to own both company's. Holden imported your German built Insignia and put a Commodore badge on it 🤦♂️The lions are definalty still NOT roaring
you's just havent seen a H.S.V (Holden Special Vehicle) with your eyes omg its amazing 😍😍🤤
Shit cars, FPV all the way mate.
Fpv doesn't have dick that compares to the maloo lets be honest here. That thing is the modern day torana and everyone knows it
@@ToxicMrSmith yeah but see you’re just straight up wrong mate. Can’t think of a single fpv that could top even the old hsv’s let alone newer ones
I’m really enjoying Travis Bell’s stories.
Bless his wife.
The "ticket clinic" ad was smooth 9/10
"Just spent quite a bit of money, but not very much..." Your wife still doesn't know the total bill does she? lmao
Me: Looking at my saws...
My Chevy Cruze: *Sweating intensifies*
Great timing! Just got back 6 days ago from New Zealand and these things are all over the place there!
me trying to think how to convert an r34 to a campervan...
I'm assuming start with a Stagea 260RS. Not much left you have to do after that. Maybe add a cargo pod to the roof.
Just put the skyline front end on the Stagea and call it a day, right after the twin turbo V8 ruclips.net/video/Gf1fSK67uMU/видео.html
Why not a r34 ute??
@@22lambo I don't think they made those stock
Attach a tent to the boot lid. Simples
The El Camino that never was. I really liked the Holden Maloo
The Maloo is by HSV, Holden's version is the Ute. just like an Alpina is not a BMW, even though it is. (eg Hoovies' Alpina B7)
@@kruleworld Not quite right... Ute means "utility". We call all vehicles like that a 'ute'. Both Ford and Holden made utes domestically in Oz for well over 50 years. We also use the word ute to describe all pick-ups - essentially anything with an open rear cargo area like a tray or well body. HSV stands for Holden Special Vehicles, and the Maloo was just a version of the ute with a bunch of bells and whistles.
Michael King evil ash literally said wat you said
@@michaelking7495 No, exactly right. Holden actually named it "Holden Ute". HSV named theirs Maloo. There's no such thing as a Holden Maloo.
Evil Ash I learned something new. I always thought it was in-house, like SRT is to Mopar
Good to see someone from the US that loves utes as much as we do man, build looks mint. Plus it only owes u 40 or so grand
"I daily drive this thing", cuts to a massive cook
This is why we need to eliminate the "25 year rule."
EDIT: And the "Chicken Tax."
The 25 year rule is never going away.
As for the chicken tax, yes.
If u have the money to import it, it should be allowed...
@@MeDicen_Rocha never say never. We would have to call our representatives and congresspeople to pressure them into eliminating the 25 year import rule for personal imports, and lower it to 15 years for bulk imports (so it doesn't affect the manufacturing sector) and reduce the chicken tax from 25% to either the 2.5% cars and motorcycles are subject to or 3% to make it only a bit higher but still perfectly reasonable.
@@LouisSubearth Solid argument, but i cant see the dealers allowing any sort of change for personal imports and much less for bulk imports. The business model works on not letting you have much choice.
Also the DOT wont allow it to happen either. It is a lot of bureaucratic bullshit that will never go away. Specially due to the safety concerns.
As for the chicken Tax, we have reached the point where we should just get rid of it altogether.
@@LouisSubearth You still can't even buy a car on Sunday in a number of states - because the car dealers are politically powerful and do not want to have to open on Sunday. I don't see them ever allowing us to import personal vehicles from overseas and cutting them out. And you got all those regulations the feds work so hard to dream up that they wouldn't want to see you bypass by importing.
I’m going to miss Holden a lot especially for their Australian muscle cars
I want a Ute so badly😭
I'm gonna miss Holden for their Korean boiled fish
I actually saw an early 2000’s one at Street Machine National in DuQuoin IL last year. It was sitting in the back near some drag cars. My dad was focused on the drag cars but the Holden caught my eye. I really wish GM imported it to be the El Camino like they did the Commodore to be the SS
If u live in usa do the same thing .
I really want a GTS Maloo but my buddy down in Queensland told me it’s gonna be hard as shit since I don’t have a chassis to mount the body to...
@@yaboikungpowfuckfinger7697 it should be the same chassis
It still makes me sad that they never officially made these for the US. I would've loved to have one of these.
Super cool that you basically made your own!!!
I feel like the SSR is the closest thing to a modern El Camino North America will ever have.
Pretty much yea.
Who’s watching from Australia 🇳🇿🇳🇿🇳🇿
Meeee
Yessir
Yep, for sure.
NZ 😂
That's the NZ flag lmao
"Just spent quite a bit of money, but not very much..." Your wife still doesn't know the total bill does she? lmao
There is a mad cunt on the Commodore boards in Australia whose tag line is IF ITS GOT TITS OR WHEELS ITS GONNA COST YOU.. ESPECIALLY IF THEY ARE BIG TITS AND BIG MOTORS.
RIP Holden 2020
@@Taojas
He speaks much truth.
#straya
Some guys marry the wrong wives. Mine gets told what I'm going to buy, but she is allowed the same caveat. We keep it on an even keel.
@@TA_Plus_Hemi exactly! You spent $500 on some crap...I get to spend $500 on crap I want 😆
I lived in Australia for 9 months and traveled up the east coast from Sydney to Cairns and back. Never understood why these or similar versions sold here in the USA. The other variation of UTE's have aluminum flat beds, with or without tool boxes . I stayed at a camper village in Byron Bay for 3 weeks and a guy there had two really tall tool boxes on the sides . There was space in between and he stored his surf board and fishing gear. Had a roof top pop up tent , solar panels and regular tent also , 4 wheel drive. There is so much beautiful beach to go to , you have to have 4 wheel drive to get there but not all. All the beach on the east coast have killer waves not that you can surf them all. You can basically find places that you could just live and camp, fish and nobody cares or bothers you . The other thing you see there but not here are 4 wheel drive , diesel vans. Many back packers buy them and travel around the country . They will be outfitted with cooking gear and everything and when they get done they will sell them to another group of back packers and they will do the same thing. These kids have money from their families and they rebuild the motors and fix them up so they are dependable. I actually saw one here in Atlanta and a young guy had imported it from Australia . Brought back a lot of old memories of being there You rarely ever see an American style pick up truck , there are some around but not many.
I have always loved the el camino and the Holden Utes. I think GM missed it by not building one for the States based on the Camaro chassis!
Travis is a legend he pronounced all the names correctly! You rock sir!
Except the wagon.That's a Commodore Sportswagon. Statesman is a different car. Same wheelbase but it's more designed to be a luxury vehicle with extra passenger room.
Nathan Yeah I was over looking that issue, it’s just so rare to hear an American pronouncing things correctly
Really impressed with his Australian vocab
First American to get it perfect with the words! Glad you love it mate
He is the only one of these "presenters" who have real world friends and take in what others say obviously
Well done to him
He didn't get "station wagon" correct tho... Otherwise, well done.
Ok... I'mma say it, with the drone shot with the two cars...
"These two Utes...." "Utes???"
The wheels that are on your ute, I was with Holden Special Vehicles when they got designed.
One of my colleagues, Rolly, had a immaculate 1969 Holden HT Monaro that he drove in from time to time. One of the CAD guys walked in to our area on this day and asked who owned the HT in the carpark. Rolly told him it was and and the next thing, the two of them are out in the car park taking off one of the factory hubcaps. Later that afternoon, the guy comes back and gives Rolly his hubcaps back.
I can't remember exactly how long after that, we were shown the a sculptured design of a wheel for an upcoming model based off Rolly's hubcap. Whe you put the wheels on your car next to the HT hubcap, you will see the origins. But without knowing, most people wouldn't pick it.
R.I.P Holden you shall be missed.
My dad had a VE commodore wagon and that was fun
Also Holden did make some left hand drive cars for export to the Middle East and other places. If you need LHD interiors
(To clarify LHD commodores were sold as Chevy omega’s in brazil and as the pontiac G8/GTO/Chevy SS in America)
(RHD commodores and Utes were sold in Australia, New Zealand, South Africa, the Middle East ,Japan ,Etc.
the Utes were no available in the UK, North America or Europe)
Yep, the VT - VE Commodores were sold here under the Chevy Lumina including the SS models. Too bad we never got the Ute :(
@@Bahraini_Carguy Which country because America never got the VT in sedan form. They got the Pontiac GTO which was a Holden Monaro VZ
Had a 6.0L sportswagon, such a good car
@@cjdacka the VX's, VZ's and VE's rebadged as Lumina's were mainly sent to the middle east and south African. Wiki pages words not mine
Also the wiki says the lumina was availabe as a ute, available in South Africa trough 2006-2007, available in the middle east trough 2009-2010
Don't know how accurate those statements are you be the judge
@@activecamoflage6649 correct
These videos are the perfect length for a 15 minute break.
I’m glad I found your RUclips channel. I’m a fan of the Holdens too
Travis, I'm pretty jazzed that you left the Holden grille and emblem on the front of the car. Most Americans probably would have switched it over to the Pontiac one, for familiarity. The Holden front end would leave many of your kinfolk scratching their heads for a bit, unless they know of course. It's my second time watching this video, because it's awesome.
GM killed Holden last week. RIP.
GM pricks killed Holden, Saab, and many many good brands.
That what you get, when accountants take over automotive company.
Edit: Thank you for so many likes guys/girls. You are awesome!
Have you ever heard someone say: Hey, check out that SAAB? Have you seen the new SAAB coming out next yr? Man, I'm trying to save up for a new SAAB. NO. VOLVO neither. They killed themselves by ignoring how ugly they were
I used to say have you seen the new Saab coming out next year! Can't do that anymore. Poor Saab they made great cars.
@@PaulFloyd207 Was this back in the 80's when the convertible was kinda popular?
@@PaulFloyd207 They were durable n safe cars but not many ppl want to pay high prices for a car that looks like a kid drew with his Left Hand 😆
I am just a fan of their cars. I owned a 97 9000cs for a while. My family owned an 87 900, 2010 9-5 arc wagon, and 2 9-7x (Saab trailblazer) I have always been a fan of Saab cars. I don't what it is but they just feel like a solid well thought out car. I am just a fan.
If you want your ute to really look tough - throw a HSV ve maloo hardlid and sailplane combo on the rear. They match up perfectly to the original and really blend the rear of the cab to the tray a lot better than the original
Man, I just saw this car at the qualifications of the Indy 500. Travis is awesome.
For real m8?
Take it down to the freedom factory at the opening
I have been trying to get Garrett to bring in a Holden for a while, we import the shells but so far he hasn't responded so I guess he wasn't that serious about it. But yes maybe if this is brought down to the FF he may change his mind?
@@VA-ng2ve who knows what he's thinking, I just love the idea of a commodore Ute with a huge blower at the FF to represent the shit
@@VA-ng2ve Probably still broke after buying the track and getting it ship-shape.
@@cesariojpn LOL this was before the track but even still he has more than enough for a shell, we can get one in pretty easily for 7,500 USD or less. Then the parts they have there they could get it up and running pretty easily.
@@VA-ng2ve He apparently ordered a new Ram truck and has a C8 ordered along with the FF and projects so he probably does need to chill for a minute hah
Indiana is going to be flooded with Nissan “240Skyline GTR”
Jesus Littt I know 3 people with r34s in Indiana
I live in Indianapolis and have seen multiple r33's. Haven't seen a r34 though
I was born in terre haute, IN and grew up in Indianapolis, but I moved to Atlanta when I was 7. I’ve been in Atlanta for 19 years and in my opinion The car scene is better here other than the Indy 500.
There is nothing in the world like import alliance at the Atlanta Motor Speedway.
too bad indiana is one of the no fun states you do anything your going to jail
I've wanted a ute ever since I saw it on top gear
I’m on my 4th Holden ute. I learnt to drive in my dads V8 when i was 14 so I’ve always had a soft spot for them. I now have a VE SSV with HSV upgrades and a VU Gen 2. Two things I don’t love about the VE are the hard tonneau is quite high and i can’t see out the back window too well, and the seats are bloody hard!
RIP Holden - You will be missed. I loved my 2004 Ute.
Holy shit I bought my first car today and it indeed is a 2004 Holden ute
@@declangoodwin6768 never ever ever sell it. Wreck it. Store it. Do anything but sell it. Because the person buying it is going to sell it back to you 10 year later for 10 times the money.......and you are going to pay.
Because its rare to get something these days with so much disregard for traction control.
"When you tell them it's a 2009 they almost get depressed"
Yeah. Yeaaaaaaah... Damn I really wish we got these so bad.
now would be your time to do this. holden just closed down
Prefer my manual 07 6lt to the 11 se2 ve i had, 07 sucks the ground like a hooker (20"s help)
Awesome story. I have a 2015 Caprice that I've been converting to the Holden badging, grille, wheels, etc..
So good to see it badged as a Holden
Holden Utes are just ace! I've got one and I live in the Isle of Man.....
Australians- THATS OUR HOLDEN THATS OUR HOLDEN!!!!!
Edit - thnx for the likes 🙂
blurrppee 05 was our holden
@@683dxwww7 yeah RIP holden they definitely influenced the Australian car market :(
Yeah, nah. We don’t care. They’re everywhere here.
@@YellowDieselGolf Yuh but not in other countries so if we cna brag about we usually do
Customs official: Welcome, can I see your passport please.
blurrppee 05: wE mAdE ThE hOlDeN uTe.
Customs official: Get out.
This is the type of stories I like watching. Ingenious!
I met Travis at Cleetus and Cars Indy on May 1st. Super chill dude.
someone tell Cleetus that his dream can come true!!!
Holy crap, I actually met you in person before! Supercar Saturdays, you said that GT8 Aussie is a better car builder than the guy from Colorado!
Love the story. I've probably seen a dozen of them today in Canberra. Three of the guys I work with own them. It's nuts that they never went to the US, they would have sold tons of them.
Travis is a great story teller
What car do you dream of having in the US that we can't get yet?
Right hand drive Rx8.
A Holden HSV GTS!!
Toyota Corona
Right hand drive porsche 959
Nissan Silvia S15
"They know where I live, they AIN'T coming." 🤣
Not a Holden fan here, but thoroughly enjoyed watching your journey in getting your dream ride. Well done with your perseverance, you now have a unique and desirable vehicle in the land of motor vehicle excess.👍
Makes me happy, he kept its origins. 👍🏼👍🏼🇦🇺
1948-2020.. rip gm holden..
I daily the exact same spec SSV ute here in Australia, Fun fact that redhot dash/seat combo was a $5000 option great ute!
Wow. It was a much cheaper option on the G8 GT and GXP. I had a white GXP with the red interior and gauges. I wish they made more.
MrCarGuy20 you realise he is talking Australian currency $5,000 Aussie is about $3200 US
@@iamasmurf1122 Clearly _you_ don't realize that when these cars were new the exchange rate was about the same.
Come on. Not very difficult.
Non-car guy: "Sir, what kinda vehicle is that"
"Its a 2009 Ronald McDonald"
Non-car guy: "HOLY SHIT!!!"
Two months to do the complete body swap!? That's amazing and those guys are really motivated.
Yeah I knew I’d seen a Ute in Charlotte before lol
Same! In the Mooresville area a bunch a few years back.
theres a lime green one in gastonia too
@@rileymcdonald779 met him at a meet. Super nice dude
@@rileymcdonald779 Seen that one a while back on 85 N, right there at Concord Mills.
Had to pinch myself to make sure I wasn't dreaming lol.
riley mcdonald With a massive weird looking hood? If so, I’ve seen that as well. I have also seen a fair amount of golden converted 4 door G8 over the years in the area. Having spent a number of summers in Australia, my neck almost breaks seeing one drive past locally.
Why does this guy sound like dr. Phil?
Did you know that there are twin cab Holden utes in Australia? Not as common as the normal ute, but there are still a few around.
A Holden wagon would be the route I go
No, mate. The hardtop is a tonneau (tonne-o) cover. The bed is the tray.
The Statesman was the high end, long wheel base version of the Commodore. The wagons were just plain station wagons
Nchalada actually the hardtop is a hardtop. A tonneau is a soft (canvas or vinyl) cover for the bed. A tray is a steel or alloy body for the back that you can fit to a one tonner (or also called a cab chassis. Which is a Ute with nothing but frame rails which you can attach any body to the back that fits your requirements).
Wagons in ve/vf models were called sports wagons.
The statesman (also called caprice, yes the American cop car. It was also the name of the statesman that was absolutely the top luxury model, as in statesman caprice, until the statesman name was dropped mid ve and it was just called caprice) was the top of the line Holden. It shared the same underpinnings as the Ute and sports wagon.
Scraps G no, a Ute can be based on a chassis or monocoque construction. You are correct about one tonner (or cab chassis).
The sports wagon was the actual name that Holden gave the wagon body style, as it was a very different design to previous wagon models that were designed to be used for either passenger or commercial usage. Telstra (Australia’s biggest telco) had a major say in the design of all Holden wagons from vn to vz.
All HSV commodore based models were still registered as Holden Commodores
The wagons were called "Sports Wagon's" Technically for the VE and VF I daily one.
@Scraps G The naming came partly from the fact that the VE / VF used a shorter wheelbase then the older ones, but the 6.0L V8 with a 6 speed manual trans are pretty common, and for a family car the go pretty well in a straight line, with a slightly different exhaust they sound like a sports car and mines lowered so it handles reasonably. So I guess it depends on your definition of sporty (Its certainly doesn't have the same Go Kart feel around corners that my GC8 WRX has but its more sporty then any other family car i've driven)
@Scraps G Are you saying the WB isn't a ute?
Im Australian and this is still the best holden story I've heard!
I work for Mazda. Mazda makes a bad-ass pick-up called the BT50. It's super popular...IN AUSTRALIA. On a side note, I had a client with a Chevy SS that he nearly completely converted to resemble the Holden Monaro. It's one of the most beautiful cars I've ever seen and it is on my attainable car bucket list for sure.
The first Ute was built at the Ford factory in Geelong, Victoria in 1925.
Straya I wouldn’t be able to live in a world without my utes😂
well they don't make them anymore so.... :(
Absolutely awesome! The Utes are such an icon in Australia. Have always thought they were very cool and wished they were available in the US.
Holden's are collectors items now.
Finally a American that knows how to pronounce the name of it and use the proper words
Ute prices are about to fly up 🤣
Not really, the demand is still pretty low. We import the shells. The hardest part is finding a shell to begin with the price at most is typically around 3,000 AUD for a VE/VF. If someone doesn't want to wait for one then yeah they would need to buy a running/driving one have the engine/trans/diff and a few other things removed which will add to the cost.
Well the Australian dollar is sinking so that might help you out in getting a VE/VF body cheaper.
@@paulsz6194 That doesn't really matter that much. The cost of the shell is usually the lowest cost. If a shell is 3000 aud, that would be 1,980 USD right now. Well we go by Wells Fargo rates so it would be 2,074.80.
The point is at most you would save a few hundred maybe if it really seriously tanked. Import costs are fairly steady. We charge around 3300 to 3800. The cheapest other company I know that imports them it will be about 4400 through them. That cost will not change if the Australian dollar tanks. Just the shell cost will be slightly cheaper.
They call it a lid in Australia not a tray 😂✌️
ive heard tray in australia
@@xCookiee the 'bed' is called a tray. The lid is called a lid
The tray is the bed, the top bit is a tonneau cover.
@@leonkernan ..
Yep a hard tonneau over the tray.
Tray is alloy or steel . Bed is body panels . Least in nsw it is
People with money, "bought it cheap, was 13 THOUSAND dollars" I wised 13k to me was "cheap" lol
Always wished we could've gotten the Ute here. I think they would have sold quite a few. And as the owner of a Saturn Ion Redline... I mourn the loss of yet another GM brand they killed from sheer negligence.
Being an Australian we take utes for granted. It’s also a shame you didn’t manage to squeeze in time to mention the Maloo LSA ute :)
too bad holden and ford dont make the commadore and falcon anymore, the lpg falcon ute is the perfect ute
Mitchell Thomas I daily drive a VF factory lpg sedan its amazing! Definitely a shame they are no more.
Lmao imagine utes bein illegal
aussie aussie aussie boys!
Amazingly it's actually easier to import and register a US vehicle here in OZ than it is there. No as cheap maybe but easier.
The price is on the in country work. Like Hellcats are super easy to import but it stings when you gotta do the transfer to RHD
@@TheTeremaster Oh yes, better to stick to 30 plus years old. The RHD conversion will cost you more than the car and the shipping.
Great story mate, thank you!