That's it. I've been torn between the HYTE Y60 or the HYTE Y70. Going to place my order now for the HYTE Y70 because of the extra room. Oh, BTW, great build and video. Thanks. 👍👍👍
@@archetype_origins The tubes - they can use some reworking as the measurements are not correct. Nontheless, it's an awesome build -> and I say that even though I do not like those Hyte cases at all. Greetings from Germany.
It's a nice build, but you already got pump reservoir unit, why do you need another EK FLT reservoir ? you could add another 120mm radiator there and kinda waste of money to add useless reservoir for just for aesthetic purposes.
I chose the FLT 120 reservoir because I love the way the blue coolant is showcased in it, which adds a significant aesthetic boost to the overall build. In contrast, adding a 120mm radiator wouldn’t make much of a difference in cooling performance, especially since we already have two 360mm radiators installed. Not to mention, a 120mm radiator would look awkward in that position and limit the tubing routing options. Sometimes, there's nothing wrong with prioritizing aesthetics over pure performance-especially at this price point.
So beautiful, but your thermal paste application needs a technique to match the build. My process is to use clear-scotch tape around the edges of the cpu. One or two layers. Then apply your paste and use a credit card or other scraper to spread it evenly, riding the top of the scotch tape build up as a spacer guide rail to leave a small amount of evenly applied paste in the middle. Then remove the tape and you are left with a beautiful square patch of paste similar to a pre applied patch on old fashion air coolers. I've used this method for nearly 20 years without any issues. I typically re-apply every spring when I thoroughly clean my computer, removing everything, vacuum out the dust, wiping down everything, and reassembling.
I appreciate the built but personally I think the colour scheme is off. Too many different shades and contrasts. White, black, blue, the silver fitting and the GPU block colour( can’t really tell what that is a light bronze) etc. Also if you are going to spend this much money and time on a build a non pwm pump really in 2024? And Electrical taping the cables, come on sleeve them! Crooked hardline tubes etc. Also make life a bit easier on yourself, installing the motherboard with the side glass on the case looks painfully difficult, as well as the paste and CPU block while the mobo is installed! Not trying to pile on with the negative comments, again really appreciate the build and video, just kinda have higher standards based on your previous builds.
![⚫Monochrome ⚪ V2 in HYTE Y70 Touch [Custom Loop Water Cooling PC Build]](http://i.ytimg.com/vi/L70n7JtV_QI/mqdefault.jpg)
![⚫Monochrome ⚪ V2 in HYTE Y70 Touch [Custom Loop Water Cooling PC Build]](/img/tr.png)
![INSANE HYTE Y60 Distro Custom Loop Water-Cooling PC Build [RTX 4090 | Ryzen 9 7950X3D]](http://i.ytimg.com/vi/LeFM9ek7_2w/mqdefault.jpg)
Drop a 🔱if you like the Aqua build!
IT GOOD TO SEE THE PC LIKE THIS
It's good to see comment like this 🤍
how do you only have 26.5K subs?! you deserve much more than that
Most underrated comment
Damn this is really an amazing build!
Thank you! 🌊
That's it. I've been torn between the HYTE Y60 or the HYTE Y70. Going to place my order now for the HYTE Y70 because of the extra room. Oh, BTW, great build and video. Thanks. 👍👍👍
bro i like that that was so clean ❤❤❤
Nice build looks awesome
Thanks!
This is superb! just like how I picture out my dream build. how I wish I have this one
one of the most ocd triggering builds ive seen in a while
🥹why
@@archetype_origins The tubes - they can use some reworking as the measurements are not correct. Nontheless, it's an awesome build -> and I say that even though I do not like those Hyte cases at all. Greetings from Germany.
keep in mind it most likely gets disassembled after the video is done, no need to be perfect, thats what happens with most these builds.
Wow
😲😲😲
Met you guys at illenium! Keep up the dope builds!
It really shocked us when we got recognized outside for the first time , thanks for the support! 🫡
Only for the fact he uses a AMD cpu deserves 1000 Likes! Finally not a another booring 14000K/KS/KF with 4090 build.
Subbed!
Nice build! out of curiosity, what do you do with the old gpu heat sinks?
It's a nice build, but you already got pump reservoir unit, why do you need another EK FLT reservoir ? you could add another 120mm radiator there and kinda waste of money to add useless reservoir for just for aesthetic purposes.
I chose the FLT 120 reservoir because I love the way the blue coolant is showcased in it, which adds a significant aesthetic boost to the overall build. In contrast, adding a 120mm radiator wouldn’t make much of a difference in cooling performance, especially since we already have two 360mm radiators installed. Not to mention, a 120mm radiator would look awkward in that position and limit the tubing routing options. Sometimes, there's nothing wrong with prioritizing aesthetics over pure performance-especially at this price point.
Top shelf bro. Nice work. And great color scheme. Don’t change a thing. How much to replicate
What is the box opening knife? I know this is a computer channel, but that thing is cool!
its called a "Karambit"
awesome build, was there room left to add the screen?
Still can fit one if decide to upgrade
This Build is insane ... But can u build pcs as beautiful as this in budget like 1500 - 2000 $
Where I can get that Reservoir ??? The one mounted in the fans.
🔱
Ese líquido que es y para que sirve?
Which Thermal Paste did you use? Also your link for the memory is incorrect.
The thermal paste that came with the Optimus block, just fixed the link! Thanks for pointing that out!
очень красивая девушка😊
So beautiful, but your thermal paste application needs a technique to match the build. My process is to use clear-scotch tape around the edges of the cpu. One or two layers. Then apply your paste and use a credit card or other scraper to spread it evenly, riding the top of the scotch tape build up as a spacer guide rail to leave a small amount of evenly applied paste in the middle. Then remove the tape and you are left with a beautiful square patch of paste similar to a pre applied patch on old fashion air coolers. I've used this method for nearly 20 years without any issues. I typically re-apply every spring when I thoroughly clean my computer, removing everything, vacuum out the dust, wiping down everything, and reassembling.
What's a cooling system like that cost?
Around $7k
What kind of smoke is that?
It's a fog machine
weed
I appreciate the built but personally I think the colour scheme is off. Too many different shades and contrasts. White, black, blue, the silver fitting and the GPU block colour( can’t really tell what that is a light bronze) etc. Also if you are going to spend this much money and time on a build a non pwm pump really in 2024? And Electrical taping the cables, come on sleeve them! Crooked hardline tubes etc. Also make life a bit easier on yourself, installing the motherboard with the side glass on the case looks painfully difficult, as well as the paste and CPU block while the mobo is installed! Not trying to pile on with the negative comments, again really appreciate the build and video, just kinda have higher standards based on your previous builds.
xấu tệ
so disappointed in Vietnamese people