Nissan Patrol TD42 Wastegate Disconnect | DON'T DO THIS!
HTML-код
- Опубликовано: 7 фев 2025
- In this video we take James GQ Nissan Patrol TD42 and disconnect the Wastegate from the turbo ! only because yous asked for it! HAHAH
lets see how much BOOST WE CAN GET!! this might of been a bad idea...
if Dan was writing this he would advice not to do this !
Music by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au
Music from #InAudio: inaudio.org/
Track Name.
100 likes and you guys will go a full turn on the fuel screw?
hmmm sure ;)
M8 it already is
I'm the 99th one. ONE MORE
@@jonnienglish919 😂😂 plz noo
100th like yeewwwww
Old truck turbos didn't run a wastegate. Like you said, the fuel limits the boost
She’ll be right 560000kms on my td 12mm 30psi of boost for years now loving life
Thats the way to do it!
That’s it mate as long as it’s done right it’s fine
what's the horsepower of figures are you getting
live loud 230hp at 26 psi haven’t had it dynoed on 30 psi
Best thing ever was disconnecting the waste gate on my silver top TD42, and then wildly adjusting the fuel for more giggles.
1k likes. Cummins on!
Na lets not listen to the mechanic, let's listen to the guy who crashed the car into his own shed....lol
I did a waste gate delete and saw similar results. I also installed a flow threw 7psi lift pump from aeroflow and got a noticeable difference between 2500 and 3500. Big surprise was it sounds better up in the revs
I am with Dan on this one all the way
25psi through my BD30, she loves it
That will still open like said.. me I used a cable tie well two of them.. it will never open.. With my system comes with much responsibility. The driving style these guys use I wouldn’t advise doing it.. Great work guys..
You can buy a 230hp pump from Diesel Central/Diesel Pump Caboolture which are both in QLD. I got mine for $2750, fitted and tuned.💪Loving the GQ videos btw, keep them coming.
Thank you!! Its either that or a Cummins!! 😂
Patrick Jones - Yeah I heard ole mate talking about BT6? I think he might’ve meant the 6BT. One of our boys runs one, few videos on our channel if he wants some inspiration.
@@Turbo_Tractors We are big fans! old mates watched all of them HAHAH !! Great Content!!
Patrick Jones Haha good to hear boys
The MK 3.3turbo had the pressure relief valve on the inlet,this bloke in the singlet has got a wise head on him.
Waste Gate will still open at spring pressure of actuator, can definitely boost more, lock the gate valve shut 👌
That’s the one haha wire it shut, gut full of fuel and then see it go 😂 all they did here was let the turbo act under spring pressure
3:00 “so what he’s undoing, is he’s undoing what needs to be undone, so that when it’s time to undo, it’s easy to be undone to stop it from undoing”
HAHHAHHAAH pretty much!
Bhahahahaha
send the fuel screw home already haha! i wanna see all of the 100kw haha
G turbo are efficient up to 30pounds, most td42 turbos are free spooled and making more power then this...
With the method you used the turbo can still push the wastegate flap open under boost, if you really wanted to disconnect the wastegate then you would also tie the flap shut so it cant open.
Yeah true, however i don't think we were making enough boost for the flap to even open, maybe at like 30psi
@@AussieArvos possibly but could also explain why you were getting a couple extra psi as it was overcoming the spring pressure. I'm by no means an expert just intrigued by the experiment. To me if your running a 10psi spring for example it would only take a couple psi more pushing on the gate flap to overcome the spring and cause the boost to creep up slighlty.
@@SounDogDj just cause the intake sides at 20 psi doesn’t mean the exhaust side is aswell it’s probably only maxing at 10 or so, even lower , dan says thats there not alot of psi on the exhaust side , 20 psi gotta go through a whole bunch of valves closing and opening and the exhasut side also has the turbo tibine sucking air through so the pressure wont equalize
if it was the same pressure both sides they’re would be no advantage
So yes at some point exhaust pressure will lift the gate but this turbo is factory rated for up to 30 pound using a bleed valve so the gate will not open under exhaust pressure until past 30psi
Hoped that helped!
- the boys
@@AussieArvos makes sence. Cheers
These engines are great fun, mate had a td27 with a wound up fuel screw and a shut wastgate, the thing was on 20psi and it did skids in 3rd. He ran it for years like that befor he killed it in a skid comp after winding in the fuel screw even more, he said it got to 27psi but im sceptical haha.
I think my grandma just left them standing for dead in her 200 series LandCruiser
wait she can afford 1
Thumbs up for mechanic Dan's Sweet Mullet!
HAHAAH YOU'VE MADE HIS DAY!
@@AussieArvos hahaha, I have a question, where can I put my boost guage hose? Is it ideal to put it in the middle of the waste gate actuator hose using a T?
@@Kwitibkings Yeah that would work or anywhere on the intake manifold
-Daniel
@@AussieArvos Thank you so much
I feel dumber for having watched this 🤣
Have you seen us turbocharge the TD42??
Best patrol on the internet
This is really sad, please stop, have a real go.
😂
12m pump please, i want to see if the td can handle the extra fuel
bit of old skool advice,keep the nissan 4.2..do not,,,get the cummins,it weighs 16 ton,& doesnt make that much power.IF,you want a decent diesel,get the duramax,6.6 lly,lbz.or upto 2010.the whole shooting match can be had for 16k,,inc.,box,pedals,comp,all acessories..in a crate,ready to go..or,,IF,you want a 6 cyl,with more power than the nissan or the toyota v8,go find an MWM SPRINT.4.2tdi.no computer,no glow plugs,german engine g/box,std has 510 nm,140 kw..mine,with a td06,has 168 kw,700 nm.....go toyota,,yeeehh..theres a re clocking adaptor yopu can get,or male,to change transfer from left to right drop..cant beat those yanks,eh..
That coment about 12mm pumps is rediculous and super inacurrate build properly not like half ass hicks and tune properly and it will last forever
34psi and 900nm for years going strong.
Do us a skid in the ba..barra the world boys.ive got a ba 2 with 6spd and I cracked her open put in some rods from atomic,oil pump gears,valve springs,4"turbo back exhaust.660cc injectors plazmaman fuel rail fg manifold process west stage 2 intercooler hot side pipes and modified cold side to suit manifold she goes nuts eats LS,s easy..gotta be one of,if not the best 6cyl ever built
Mate i love the barra , got a BF MkII my self 👌 best car
interesting.. I have been running a 12mm pump at 200kw and no rebuild yet. dosent even do the apparent kettle trick and it lives up in cape york
More boost makes them last longer if tuned right
What is the branson tractor is it a f42 and what do you think of the Korean tractor...
Compressor surge in a diesel? How is there back pressure to cause comp surge with no butterfly? All you have done is maxed out the range of the turbo. ( 23psi) Not trying to be a internet warrior. Just lookin for discussion other wise liking ya videos keep em coming
cos we are running high boost the engine cant dissipate all that air when if falls in rpm so what cant go through engine surges it but is does it on both ends can be really bad but as u said we arent running that mutch boost so it only does it a little can barly hear it when it does do it
Surge is when the boost slams back into the compressor wheel, commonly makes that turbo flutter sound. This can be fixed by a blow off valve.
ruclips.net/video/2QaajARc_CQ/видео.html
Why not just put a cummins b4.5 in it? You don't need to mess with the fit so much but they'll still make 800+nm with a hx30 turbo upgrade. The internals are all rated to 1000 ft lb from memory as well so just try and brake it
You guys are crazy 😂🥰
Alternative title kettle goes boom
Your sad mechanic mate needs a bag and a hug
😂😂
This felt very anti-climactic... here I was expected some sort of explosion 😂
HAHAHAHA
Sorry very hard to kill a td42 patrol not your your 1hdt
DA CHICKENWINGx devo
Lol
Shania gave me an explosion last night for Valentine’s Day
100 likes and you guys will go removal of air intake filter hose ( the intake hose that goes to the turbo) and go to a dusty place
😂
Wath if the wastegate is permanently open instead of close ? Wath would happen ?
No boost
I drove around for 6months with the gate blocked and fuel turned up on my gu and hit 25psi on the factory 10mm pump and ht18 turbo
Wow mate that's impressive, I didn't know the ht18 was capable of pushing 25 psi
Efficiently the ht18 is not but it is possible if you have enough fuel
@@ethancumner3599 I'm running 12 pounds with no intercooler at the moment, I never have any problems .
Don't trust those Saas gauges mate, their pyros play up like a 2 bob watch.
Sounds like the exhaust was clogged which would not give the boost they were looking for.
Removing the gate will just allow the turbo to dump boost not build it..😅
Did the handbrake incident have anything to do with the twin esky mod on the tray at the time? 😂🍺
😂😂 actually yes he was about to drop the eskeys, they were empty tho 😂 🚫🍺
One of them was full
Is the fuel pump boost compensated?
no
6bt?
Yeah meant to say 6bt!
I think an upgraded 11mm pump would be the way to go
you could be right Mr Callahan!
12mm
So when’s the motor swap??
great content boys, who has the ram in the background
That would be James 😂
Just as i read this comment, i saw the ram!
500 thousand
Just ready for acting like a real nissan
You guys are far too f*cking smart for RUclips.
Swap in the Nissan Diesel UD FE6-T 6.9L 235hp truck engine for 1M Subs....he he he..
😂😂👌👌
That’s not a bad idea
Chuck a silver top motor in it
hmmmmm that or a 6bt HAHAHAH
Where’s the Bt6 👀
Keep it under gvm and rip the cooling system out.
If you get a cummins I'll have the td42
HAHAHAH DONE
12mm and people rebuilding every 80k km 😂 yeah okay
Lets be honest if you've got a 12mm you probably don't baby your 4wd 😂 🚙💨 100,000k rebuilds wouldn't surprise me
Hahah right build em properly they last forever 34pound 900nm going strong for years tune it properly .
Boys it’s 2.5k likes and ol mate stop hasn’t slammed a Cummins in it
Mines running 20 pounds with no wastgate 😂😂
hahahahaha love it!!
There's 2.7k likes where's the 6bt video 💪
Ikr!
Have to do it when they upload
Its a 6BT not a BT6 😤😂
Looks like ya buying a Cummins
Ask the engineer... Lol
wheres Dan? HAHA
Next video part one my engine blows up and rebuild it
Well I see your well over 1,000 like and don’t see a 6bt or should I say a bt6 in James Pootrol.
Would only hit 80kms in 4th gear hey haha
2.5k likes where’s the Fucken bt6 🤣
Forklift engine filth
😂😂
What ended up happening with this? Did dan re plumb the boost actuator in?
Best thing I did 😂
Be a man, weld the wastegate shut!
😂😂
Stop saying bt6.. it's a 6bt
That's all great how about sun safety your reder than a lobster
1k 6bt time
ITS TIME JAMES!!!
$2700 on a fuel pump or 20k plus on a 6bt conversion hmmmm 😂
2 tonne pole hey......
😂😂😂
35 pound and a td starts physically lifting the head off the block😂
BT6 lol
6BT not BT6 it's not a fucking Mazda bro! Waste gates are just boost leaks for diesels.
😂😂
@@AussieArvos you know it's true Patrick
Wheres the bt6 lol
covid 19 put a stop to that haha
Slow.
😂😂
6bt*