The wrap color is so amazing!! But the way you lay it into the car with your technique 👍🏼🔥I ve always respected your attention to detail and how you go above n beyond for every single customer car and for us the viewers!! Ck wraps killing the wrap game!!!🔥🔥🔥🔥
bro i cannot stop watching your videos i want to learn this so bad ...i just cannot justify the money for the course ...yet ... i do plan to take it 100% , i also am in Ontario London actually ..i really want to learn so bad ..for now im l;ike a sponge tryna learn all the trixx
Lots of props to you and ur talent...i finally gave a try to my roof wrap on my 2016 mazda3 w/sunroof....it was harder than i thought...u make it look so easy...i will keep trying
ivan garcia I have a 2015 Mazda 3 with a sunroof and it was much easier to have an extra hand to glass out the film! Once that was done it took me almost no time to squeegee and trim it up. You got this 💪
ivan garcia that can be a pain for sure, not sure what’s worse, that or it being so dam cold here that I have a hanging heat lamp to install vinyl in my garage. What really helped me was just watching ck’s videos over and over. Good luck, update me when you do it again.
@@cpr336 Same I fucked up my first roof wrap but i didnt give up I then did my first full car wrap and even bought myself a tent so the heat doesnt get me.
crazy.... that's all I have... just crazy how you can get the vinyl to do what you want... you make me want to wrap my CTS-V but I don't have the patience OR the skill... EDIT.. Just so you know that I was completely focused on the reflection of the Husky at the silent part of this video.. haha
I watched an old video...made me go to ur page to c a new video...thought u was a diff person til I saw the tats...lol. good work. I'm watching ur vids 2 learn 2 do my roof.
Can the material take a lot of pulling before breaking like other vinyl material? Like you mentioned pulling out and downward (3 dimensional) when laying it down... Great job!
This is so satisfying to watch. His talking is going to be a guide in my mind if I do a similar project. Thanks for documenting this brotha! Masterful art!!!
There’s only one other guy who’s also good but his video was teaching a live audience so the speech can’t really be compared as to a private video/demo. Still I feel you could make a pro out of me, nice job I seen other vids 👌 I’m subscribing.
I love this color, considering wrapping my one of my cars in this. Im not sure if you have but do you have a video were you show how to do small deep recesses in bumpers? Im not to sure what kind of cars over there would have them but in Australia the b series ford falcons have this really small recess around the front and rear bumper that when i try to wrap it, it gets air bubbles through it... any tips on how to wrap those kind of areas would be great!!!
Watching this while debating if I should buy a 10’ x 5’ roll of wrap for my quarter panel and cut out the vinyl for the doors on my e90... OR buy the wrap for the doors separate. Ughhh 😩😩
Is that film scratch resistance, a dog's Paws scratches the car, you have to do the whole thing over again? Is that film good on the harsh elements, of wind, rain, Halestorm, Heat,.
I tuned in because I have a full chrome wrap at my shop getting done next week. Chrome makes me so nervous because of the cost. It's insane how much it costs but I'll get through it. lol Any tips on wrapping bumpers in chrome?
Hi Henry here what do you think about cars with rainbow color what I'm trying to say is like 7 different color on a single wrap does it take away the look or shape of the car or they should just stick to a single color roll
Is there a possible way to remove all external rubber trims so the wrap and tuck in perfectly and then place the trim back on? Or do you have to cut and tuck under the trim?
That really looks nice and it takes a lot of time and I'm sure it takes a lot of money. I seen a gold chrome BMW like that before and somebody hit it the wrong way with a power washer at a car wash and blew off the whole side of the back bumper and around the door ege..i believe once water gets under it it's over!
A lot of desperate beta males hungry for Kirsten on here. Anyway, great video as usual, Christian! Been watching your videos for a while and currently learning to do it myself. You always give the best details and you're great at explaining in the moment. Thanks!
Man I get scratches on every vinyl I use.. but especially gloss. I've tried cleaning it and using micro fibers and everything and it still scratches ever so slightly. Can see it in the shop florescent lighting but it's pretty much invisible in sunlight. Is there a way to squeegee absolutely scratch free?
From your name you should know that ICE & Shit Tyres make your car Faster than just about Anything -😨- Be it A Shiny Chrome Car or 2 teenagers trying to get ďressed when a Parent opens the Front door ! 😲 !
@@chantereaudominique8855 You mean a Chrome plane is faster than an ordinary one ?🤔 Wasn't the 'Spirit of St. Louis' - the 1st Trans-Atlantic plane polished Aluminium or wood painted Silver ? I remember the front cowling over the Engine was definitely Metal, because it had swirl marks, like a milling machine or polishing grinder would leave on a metal surface. The only other thing I know was the Plane was designed to be as aerodynamic as possible, so the was No "cockpit" as such or window to look out, except in the doors !!
Because trim removal can be sketchy, do you use any programs to see where retainers and tapes are used on trim? I've done a TON of trim on Ford/Lincoln products when working at a dealer. I'm the guy who does the work no one else wants to do. Luckily we had OASIS with diagrams to see how the trim was put together. Again, great work! I've been binge watching your vids lately. I love the one-take videos and the tons of information you share!
I do not use any programs or diagrams, only experience when it comes to removing those types of parts. Fortunately I haven't broken anything over the years but if I ever did I would replace it with an original part
@@CKWraps Haha Such a dawg! Like 130 comments, maybe 50 replies.. Soooo many questions from people regarding many subjects for years, 0 response from you. Now this girl mel tells ya she's new to the channel 4 months ago, asks a stupid question, and boom she gets 2 responses, of the 3 total that you posted in the entire feed. (Yes I counted, a little bored and that sh!t made me laugh). Lmao. Entertaining just from that point. Hope ya wrapped her. 😜 Ooo. And she got a heart! Getting funnier!!
So I was using 3M XMAS wrap to do my kids presents and while heating a body line on this nerf gun toy the wrap began distorting and making the Elf's stretch and look like tall deformed transformers. So I started to apply heat to shrink it back using my teenage sons Meth torch he uses when hitn the pipe and ill be damn if the shit didnt catch on fire. Now my question is this Ive tried to use big words that make me feel uncomfortable sayn and make me sound like Stuttering Stanley when i try to pronounce them like you do in all your videos and i gotta say im getting there but how the hell do i get open meth sores on my face like yours without smoking ICE???Anyways keep losing weight smoking out your looking as you say a billion times in a video PERFECT.
I think your the best teacher on vinyl wraps and details on vehicles.
Finally back to the good ol days... Love the back to old style content.
The wrap color is so amazing!! But the way you lay it into the car with your technique 👍🏼🔥I ve always respected your attention to detail and how you go above n beyond for every single customer car and for us the viewers!! Ck wraps killing the wrap game!!!🔥🔥🔥🔥
Great info and I like your respect for the young lady helping. Well done.
Looking at trying to do this professionally. These videos you are creating help so much. Thank you
Omg I am so starting to do wraps on my and my girls car hahaha... Fell in love with this art.
I’m eyein’ that purple in the back 🤤😁
bro i cannot stop watching your videos i want to learn this so bad ...i just cannot justify the money for the course ...yet ... i do plan to take it 100% , i also am in Ontario London actually ..i really want to learn so bad ..for now im l;ike a sponge tryna learn all the trixx
Great video. Looks like it can really be a challenge when using chrome but lots of fun. Can't wait until next week when I will be at the course
man.....watching vinyl get glassed out is so satisfying.
Another awesome instructional video brother, notwithstanding an immaculate job as always.
Respect for you artists doing such nice work!
Lots of props to you and ur talent...i finally gave a try to my roof wrap on my 2016 mazda3 w/sunroof....it was harder than i thought...u make it look so easy...i will keep trying
ivan garcia I have a 2015 Mazda 3 with a sunroof and it was much easier to have an extra hand to glass out the film! Once that was done it took me almost no time to squeegee and trim it up. You got this 💪
@@keirstenabc i had no extra hands 😥😥😥😥and this daym FL heat didn't help....but i shall not give up
ivan garcia that can be a pain for sure, not sure what’s worse, that or it being so dam cold here that I have a hanging heat lamp to install vinyl in my garage.
What really helped me was just watching ck’s videos over and over.
Good luck, update me when you do it again.
@@cpr336 Same I fucked up my first roof wrap but i didnt give up I then did my first full car wrap and even bought myself a tent so the heat doesnt get me.
This wrap colour looks so good on film. Good job guys.
crazy.... that's all I have... just crazy how you can get the vinyl to do what you want... you make me want to wrap my CTS-V but I don't have the patience OR the skill...
EDIT.. Just so you know that I was completely focused on the reflection of the Husky at the silent part of this video.. haha
I watched an old video...made me go to ur page to c a new video...thought u was a diff person til I saw the tats...lol. good work. I'm watching ur vids 2 learn 2 do my roof.
Great work absolutely beaut! Just wondering average time to do a standard sedan
This guy is awesome.. I wish he was in the DMV area cause I surely would bring my charger in
I personnaly think that u are one of the best in the world at wrapping cars . Your reading material skills are like insane ... love your work !
Can't wait to see this out in the sun👍
3D stretching, or as Justin Pate calls it "triangles M-kay". Thanks for the video's! Learned a lot
That color looks good on that car good choice
Extra hold is... beautiful!
Another informative video and a very pretty helper ;)
Really, really nice!. The car looks pretty good too. :D
Your ability to wrap is amazing!
hi i am zeeshan frm pakistan i am a warper
Let me ask a question in the wheel wells is it okay to use half inch wide clear double back tape to get it to stick better in the wheel well?
Can the material take a lot of pulling before breaking like other vinyl material? Like you mentioned pulling out and downward (3 dimensional) when laying it down... Great job!
Chrome rips. Any seam needs to be tear dropped. Any cut will just run
Holy shit this was satisfying to watch, thanks for the lesson on the past 2 videos I've seen of this S8 wrap. Love your work.
Watching you both pull the wrap after heating was fucking tasty. It just perfectly wrapped around (for the most part) that was satisfying lol
This is so satisfying to watch. His talking is going to be a guide in my mind if I do a similar project. Thanks for documenting this brotha! Masterful art!!!
36 dislikes , must be the competition . Amazing workmanship young man .
Love the magnets on the aluminium
There’s only one other guy who’s also good but his video was teaching a live audience so the speech can’t really be compared as to a private video/demo. Still I feel you could make a pro out of me, nice job I seen other vids 👌 I’m subscribing.
I love this color, considering wrapping my one of my cars in this. Im not sure if you have but do you have a video were you show how to do small deep recesses in bumpers? Im not to sure what kind of cars over there would have them but in Australia the b series ford falcons have this really small recess around the front and rear bumper that when i try to wrap it, it gets air bubbles through it... any tips on how to wrap those kind of areas would be great!!!
did you ever get it done?
Watching this while debating if I should buy a 10’ x 5’ roll of wrap for my quarter panel and cut out the vinyl for the doors on my e90... OR buy the wrap for the doors separate. Ughhh 😩😩
Is that film scratch resistance, a dog's Paws scratches the car, you have to do the whole thing over again? Is that film good on the harsh elements, of wind, rain, Halestorm, Heat,.
is the car masking tape necessary?is it more just to protect the car from the knife?
You are one with the vinyl!
another awesome video....lovin that colour
I tuned in because I have a full chrome wrap at my shop getting done next week. Chrome makes me so nervous because of the cost. It's insane how much it costs but I'll get through it. lol Any tips on wrapping bumpers in chrome?
hello christian, do you have/need any special permits or licenses to do what you do ?
Do you always gotta look for the body lines first?
Good job 👍 . Nice Wrap
Hi Henry here what do you think about cars with rainbow color what I'm trying to say is like 7 different color on a single wrap does it take away the look or shape of the car or they should just stick to a single color roll
Obviously everyone is gonna have a different opinion, but I love colorchange vinyls..
Just the info I was looking for thank you
Bro you need your own shop cause you are doing a good job, ut your coworkers are in the way
yup
I'm pretty sure that is his shop and that's his business
@@hunnybhun5637 You are correct...it is his new shop. He moved in a short while ago. It's nice and quiet unlike the other place.
@@bevmcmullan-kungl8089 yeah like I said. I pretty much knew that the guy above didnt
what backing paper cutter is that ? been trying to look for one.
Love this colour I want the same but you make it look so easy to fit My roof was hard for a first time go
Pheonominal work Christian
Is there a possible way to remove all external rubber trims so the wrap and tuck in perfectly and then place the trim back on? Or do you have to cut and tuck under the trim?
Yes there's a way.. very very time consuming for something unnecessary.
what brand is that?? Vvivid?
Bros GYAT help from his gf
Do you really use the 70% isopropyl alcohol undiluted? That sounds like a lot...
Where can I get that vinyl holder?
Did you get a new work premises.
Yes, he did Arshaad. This new space is so much better than the previous one and it's so much more quiet.
That really looks nice and it takes a lot of time and I'm sure it takes a lot of money. I seen a gold chrome BMW like that before and somebody hit it the wrong way with a power washer at a car wash and blew off the whole side of the back bumper and around the door ege..i believe once water gets under it it's over!
the Chrome sounds stiffer or more brittle than the "regular" stuff.... true?
Really nice👍
hi mate what happends when you wrap over stone chips? thanks.
You see an indentation of the stone chip.. obviously. Lol.
How much
A lot of desperate beta males hungry for Kirsten on here. Anyway, great video as usual, Christian! Been watching your videos for a while and currently learning to do it myself. You always give the best details and you're great at explaining in the moment. Thanks!
No kidding.. I didn't even notice her tbh until I came down and read the comments...
What brand is the chrome?
great work.
Can you do a vid on wrapping a sportsbike?
Btw quick detailer can be used in place of shield guard... much more cost effective and easily lets you install chrome scratch free
quadrunnerjake thank you for that tip !!
Man I get scratches on every vinyl I use.. but especially gloss. I've tried cleaning it and using micro fibers and everything and it still scratches ever so slightly. Can see it in the shop florescent lighting but it's pretty much invisible in sunlight. Is there a way to squeegee absolutely scratch free?
Chrome has less wind resistance, makes your car go faster 🏎️🏎️🏎️
icerocket and for a plane it’s important too.
From your name you should know that ICE & Shit Tyres make your car Faster than just about Anything -😨- Be it A Shiny Chrome Car or 2 teenagers trying to get ďressed when a Parent opens the Front door ! 😲 !
@@chantereaudominique8855 You mean a Chrome plane is faster than an ordinary one ?🤔 Wasn't the 'Spirit of St. Louis' - the 1st Trans-Atlantic plane polished Aluminium or wood painted Silver ? I remember the front cowling over the Engine was definitely Metal, because it had swirl marks, like a milling machine or polishing grinder would leave on a metal surface.
The only other thing I know was the Plane was designed to be as aerodynamic as possible, so the was No "cockpit" as such or window to look out, except in the doors !!
Because trim removal can be sketchy, do you use any programs to see where retainers and tapes are used on trim?
I've done a TON of trim on Ford/Lincoln products when working at a dealer. I'm the guy who does the work no one else wants to do. Luckily we had OASIS with diagrams to see how the trim was put together.
Again, great work! I've been binge watching your vids lately. I love the one-take videos and the tons of information you share!
I do not use any programs or diagrams, only experience when it comes to removing those types of parts. Fortunately I haven't broken anything over the years but if I ever did I would replace it with an original part
@@CKWraps Great work ethic!
Yoga pants don't lie
👀 Lmaoooo
Im using an orafol vinyl and never came with a protective film just peal off the adhesive guard and stick it i was like wtf???
Do you tint windows? If so could you do a vid on tips and how to do it
Tinting windows is a different skill than wrapping.. I do both and I'd say tinting is quite a bit more difficult.
@@CaucAzN1024 i am a 10 yr tinter . Is it possible to learn to wrap good on your own opposed to working in a proffesional wrap shop.
@21:37 is where I always have problems. I start to get those ripples and they cause wrinkles.
How do I order this stuff in the US?
I am new to your channel...but I love your videos! I am looking for finished product on this car plz :)
Thank you! There should be a walk-around video of the car.
Here it is ruclips.net/video/V1zXxHy_JeY/видео.html
Holy crap!! Masterpiece! You absolutely are THE MAN! Beautiful job! I love your videos! You really are a great teacher :)
@@CKWraps Haha
Such a dawg! Like 130 comments, maybe 50 replies.. Soooo many questions from people regarding many subjects for years, 0 response from you. Now this girl mel tells ya she's new to the channel 4 months ago, asks a stupid question, and boom she gets 2 responses, of the 3 total that you posted in the entire feed. (Yes I counted, a little bored and that sh!t made me laugh). Lmao. Entertaining just from that point. Hope ya wrapped her. 😜
Ooo. And she got a heart! Getting funnier!!
Nice Helper ;)
Hexis super chrome 😎👊👍
That’s how u get views! Put your beautiful lady in the videos lol awesome job like usual
Can you do a tutorial on a truck camper shell 😬
Thanks for the disconnected microphone towards the end.
Apakah ada kerjaan yang mengelupas atau mengkerut setelah 1 bulan @ckwrap
Wouldn't be easier to remove the wheels n leave the car on the stands?
time = money 💰
I don't think the wheels get in the way really personally... Guess maybe if the car was slammed and had 0 fender gap.
Kristen helping Christian
You didn't show gas tank door cut out.
Ck where did you find that wrap? I want to wrap my mustang in chrome
Hexis super chrome
she got better tension lines than the bmw
Хорошая работа ! Но стойку возле лобового стекла , я бы вырезал по форме , а не прямо , меньше складок !
So I was using 3M XMAS wrap to do my kids presents and while heating a body line on this nerf gun toy the wrap began distorting and making the Elf's stretch and look like tall deformed transformers. So I started to apply heat to shrink it back using my teenage sons Meth torch he uses when hitn the pipe and ill be damn if the shit didnt catch on fire. Now my question is this Ive tried to use big words that make me feel uncomfortable sayn and make me sound like Stuttering Stanley when i try to pronounce them like you do in all your videos and i gotta say im getting there but how the hell do i get open meth sores on my face like yours without smoking ICE???Anyways keep losing weight smoking out your looking as you say a billion times in a video PERFECT.
If you don’t hire her I will!🤣
I'd pay her 5k to wrap my car.. even if it was the worst wrap
Have some respect.
@@zanedavid5362 - What did they say that was disrespectful? It wasn't vulgar or crude.
Simp! Admittedly I'm several years late to the draw. Is that still a thing?
quarter*
No wonder it cost so much to have a car wrapped.A lot more detail than I imagined. I get frustrated just tinting a flat window
Ckchampion
Nice men
What's her name 😁💖
A husky is lying on the ground.
Is that his wife?
Tom Brady look alike hahahahaagagaag
❣❣❣❣❣❣❣❣💪💪💪💪💪👏👏👏👏👏👏
Клевая девка
My ripinge hillp