U are superb bro Hamara d2h ka remote ka volume buttons kam nahi kar raha tha.hamane apki video dekhi or foil paper wali trick use ki or remote chalne Laga. I am so happy bro
Great boss👍👍👍🙏it's really working within 5 minutes . My set topbox remote channel up button was not working. Putting alluminium foil in side that button really started working. Thank you so much 🙏🙏. Earlier remote was having same issue but I changed the remote , this is new remote and same problem . But l repaired it now . Kaash ye video pahale dekha hota😢.but anyway thanks🙏.
Brilliant, thank you! I tried two other youtubers' suggestions, one of which fixed one of my remotes, but your tinfoil trick was needed on the stubborn one.
There’s a little bit of an easier way to fix any type of soft carbon buttons like this, First take your carbon button pads get a piece of paper and evenly swipe each button carbon side down with even pressure down the paper three to four times about 3 inches until you see an even black mark and do this with each, then when you’re done just take isopropyl alcohol and clean each pad Plus the surface of the Circuit board Contacts for the buttons then put device back together and 90% of time it fixes all the issues.
Thanks for this tip - you saved me a bunch of time and frustration trying to find carbon dots. Instead, I followed your advice and started working... but intermittently. So I tried swiping the misbehaving pad on the paper two times in four directions (N,S,E,W) and now it works better than new. Much appreciated.
Wow. Problem fixed in about a minute. Didn't even do the isopropyl but have in the past. I have looked at so many repair videos and not seen this. Was about to try the tin foil method. Have you considered doing a video of this? Hope it goes viral! Thank you VERY much.
smart to use graphite as a conductor, the alluminum foil method, any idea how much would it last in the long term with constant use? also, would that affect the board due to friction? (the actual copper on the board)
Usually just cleaning all the undersides of the buttons,and all the contact points on the circuit board with rubbing alcohol will restore the functions.One step.
Shoe Goo (barge glue) would be good for the aluminum foil and graphite dust. The carbon dots should come with adhesive already on them, but if not, Goop would be good for them.
bhaiya;Job barish hota hai tob moisture ke karon t.v remote kam karna bondh kor deta hai.weather sukha ho jata hai to remote naya jaisa kam korta hai.kiya koru please bataiye.
That wipedown, should be done with alcohol, on the cotton, and easier with Q tips. Also, wipe down the buttons. Also, can be done with liquified carbon paste. I don't do that any more, as it doesn't last. I was hoping you would clean the outside of the remote. that's just too gross. I'd be ashamed to let anyone see it.
![How to repair remote control - when cleaning doesn't help [replacing the button pads]](http://i.ytimg.com/vi/Z7tsTG_Kq4M/mqdefault.jpg)
![How to repair remote control - when cleaning doesn't help [replacing the button pads]](/img/tr.png)
U are superb bro
Hamara d2h ka remote ka volume buttons kam nahi kar raha tha.hamane apki video dekhi or foil paper wali trick use ki or remote chalne Laga.
I am so happy bro
Foil paper method worked for me repaired 3 remotes , Thanks for the info 👍
Thanx bro amaizing. Tip . Mai new purchase karne vala tha . Purana hi thik ho gya thnx agin
You are superb bro. I wanted a video to repair ps1 remote . Your video helped me thank you so much. I will subscribe and like .👍❤️👍
Great boss👍👍👍🙏it's really working within 5 minutes . My set topbox remote channel up button was not working. Putting alluminium foil in side that button really started working. Thank you so much 🙏🙏. Earlier remote was having same issue but I changed the remote , this is new remote and same problem . But l repaired it now . Kaash ye video pahale dekha hota😢.but anyway thanks🙏.
You saved me! That carbon dots I cannot find to buy, but aluminium foil workes just fine. Greetings from Serbia!
Just i need to attach a small piece of flat aluminum foil over the black dot ..and it will work..
Does it work?
@@MuhammadTalha-nq3er yes
@@majstor23boza ok boss
Its really helped me,, I used Aluminium Foil Method and its worked perfectly...Thankyou So Much👏🤝
Super excellent inda mathiri neraya video podunga
Work pannutha
Thank you bhaeya brilliant idea Mera remote thik hogya koti koti dhanyawad
Brilliant, thank you! I tried two other youtubers' suggestions, one of which fixed one of my remotes, but your tinfoil trick was needed on the stubborn one.
Thank you for this video helped me alot :) the pencil ✏️ method did worked for me 🤘🏻😀
नटराज की पेंसिल पे से अनुमान लगा रहा हु के आप भारतीय है।
आपके जुगाड़ से मेरा रिमोट ठीक हो गया। बड़े काम का वीडियो है।
Ji ha.... Shukriya
There’s a little bit of an easier way to fix any type of soft carbon buttons like this, First take your carbon button pads get a piece of paper and evenly swipe each button carbon side down with even pressure down the paper three to four times about 3 inches until you see an even black mark and do this with each, then when you’re done just take isopropyl alcohol and clean each pad Plus the surface of the Circuit board Contacts for the buttons then put device back together and 90% of time it fixes all the issues.
Thanks for this tip - you saved me a bunch of time and frustration trying to find carbon dots. Instead, I followed your advice and started working... but intermittently. So I tried swiping the misbehaving pad on the paper two times in four directions (N,S,E,W) and now it works better than new. Much appreciated.
@@bdwilcox I’m glade that advice helped you get your device up and running again.
Wow. Problem fixed in about a minute. Didn't even do the isopropyl but have in the past. I have looked at so many repair videos and not seen this. Was about to try the tin foil method. Have you considered doing a video of this? Hope it goes viral! Thank you VERY much.
Hey! Thanks. Just to mention that I tried this, it worked ok, but only for a couple of months. Then it was worse than before. How was your experience?
Bro your advice worked.. so happy... Thanks buddy 🎉
Atlast I fixed my remote after watching your tutorial. Thank you so much.
Thank you bro❤ the pencil lead trick just worked like charm fo me 😊
Good work.... Third one is best... Anyone can do that at home
A trick : watch movies on Flixzone. I've been using them for watching a lot of movies during the lockdown.
@Deandre Tate definitely, have been using flixzone} for since december myself :D
Thank You HOMEWORK tech. for a great video. It worked for me. I tried the pencil one. Looking forward to more. Thank you again.
Thanks bhai.
1 number key kam nahi kar rahi thi so pensil ka trick use karke kam ban gaya.
Cool idea man
So easy 3rd step
It's really works 😁😁
Where did you get the carbon dots from?
Pencil!!! So happy it works. Thank u very much.
Excellent 👍👍 I like the foil idea 💡, that would last forever 👌
Appreciate your videos 🔥❤️
Thanks dude this is so useful ...am repaired all my buttons in just 5 minutes
.❤️❤️❤️👌🏻👌🏻👌🏻🙏
How for it is possible to repare the remote button within 5 minutes.
Thanks bro ''jai dhanna seth ,Hare Krishna ''
Great simple video.
Thank you.
smart to use graphite as a conductor, the alluminum foil method, any idea how much would it last in the long term with constant use? also, would that affect the board due to friction? (the actual copper on the board)
Brilliant, thank you! ❤👌
This videos helped me a lot , i am going to use Pencil Dust method because I don't have Aluminum foil and Dots
I think we can use the back packing of tablets for alluminium foil
Very useful video and it wòrks wìth my both remote thanks a lot
Usually just cleaning all the undersides of the buttons,and all the contact points on the circuit board with rubbing alcohol will restore the functions.One step.
Nope, didn't work for me, but the foil trick in this video did.
Which did you use?
Pencil se b ho jati he....? Wah Yar very nice,,,
Very nice.... Good knowledge
Worked for me. Thanks!
Very nice. Now please clean the remote casing with alcohol. It’s looks filthy.
Were did you get the buttons carbon from
Thanks for the foil idea
tricks sach mein kam Karta hai thank you for this video
Shukriyaa bhai 💕💕
Thanks bro appreciate it
Pencil simple worked for me thank you
I used pencil dust method and it worked , thanks
From where you got the stickers? Provide the link for its purchase.
I purchase from local market
Are you sticking the pencil dust with feviquik?
Yes
Thank you!
From the title, I thought it was going to demonstrate three ways/methods that don't work.
Same here
Maybe setup for clickbait?
Which lotion did you use at 2:32
It's not a lotion. It is a feviquick.
@@spicyworld9280 after 5 months, I get the reply! Thanks... 😁
thanks a lot bruh the pencil method worked 😂
Thank you so much sir mera remote thik ho gya😀😎😎
Where can we buy "Catbon Buttons" shown?
Thankyou brother
😆😆 amazing video😆😆
Thank you sir
Third way.... Is very impressive
Tablet ka cover use kar sakte hai kya
Thank you brother but which glue type have been used there?
Shoe Goo (barge glue) would be good for the aluminum foil and graphite dust. The carbon dots should come with adhesive already on them, but if not, Goop would be good for them.
Good work keep it up.
I misread that. I thought initially it would have made more sense to show ways that do work.
Bhot sahi tarike bataye he apne
Amezing third one is work.thank u
Very smart :)
Give the link to purchase the carbon dots online in India please
Super tip with pencil tip
Three good ideas well done, but what a filthy remote control. I wouldn't want to handle it.
Thanks for first half of your comment
And sorry for second part of your comment😄
You can watch many other videos how to clean a filthy remote. But how to repair a specific button is only found in this one. I would put it that way.
Third ways is best bro.
Thank you bro
Nice video
Well done
TQ bro
Only foil paper also work ..thanks brother
bhaiya;Job barish hota hai tob moisture ke karon t.v remote kam karna bondh kor deta hai.weather sukha ho jata hai to remote naya jaisa kam korta hai.kiya koru please bataiye.
Aluminum foil work ❤❤❤
I can’t find those carbon dots anywhere 😢
Very nice
Nice work third one please tell me black sticker sheet name also
Carbon dots
Very good
Good, it's working.
That wipedown, should be done with alcohol, on the cotton, and easier with Q tips. Also, wipe down the buttons. Also, can be done with liquified carbon paste. I don't do that any more, as it doesn't last. I was hoping you would clean the outside of the remote. that's just too gross. I'd be ashamed to let anyone see it.
रिमोट धूप में रखता हु और साफ़ करता हु तो २-३ घंटे चल जाता है.... फिर रुक जाता है.... क्या problem है ...Cell is new
Kaha se milta h curbon dot pls reply
Any electronic store
Bro remote me ek side ke sare button work nhi kar rhe hai kya karu
Button me andar ki taraf carbon hota he ..
Agar uski wajah se dikkat he to... Aluminum foil wala ya pencil wala method use kar sakte ho
@@HOMEWORKtech bro mene remote ka sensor change kardiyaa work kar gaya
Are bro kya kya chiz istamal Karteho to battao
I just tried the aluminum foil method and it seems to work.
Good
Foil is the best option.
It must have adhesive which not possible. Coz elfee cannot work.
Where will get these Carbon dots
Any electronic part shop
@@FaizanKhan-uo3wu What will be the price?
Liquid corbon kha se milega please suggest me
Love you same remote 💗💗💗 now working properly 😆😆
What are these dotts and wherefrom we can purchase.
These are carbon dots
Give me link carbe dot
You didn't even pronounced or subtitle while using things. And you call this a helpful video?
Andha hai kya dekh na chutiya video ko working h
Mera remot par problem hai
😂😂😂
Samajwadi party jindabad
Croos video
Sun yaar 90 rupay me remote milta hai jaakar le aa🙄
👌
Good