2017- 2020 hyundai elantra tail lamp and bulbs replaced (brake and signal bulb)
HTML-код
- Опубликовано: 22 авг 2020
- Thanks you for watching please like comments and subscribe and share the love
help me help you support my channel
via
PayPal - www.paypal.me/Momoboss5
cash app- cash.app/$dullahgosohard
Instagram dullahgosohard?...
links for the parts Korean built
left outer tail lamp amzn.to/34opfoA
right outer tail lamp amzn.to/2QjzUJ6
links for the parts usa built
left outer tail lamp amzn.to/3gnSwlE
right outer tail lamp amzn.to/2EwTVt2
links for the tools
amzn.to/3aQ0MJT 
Авто/Мото
From a lifelong teacher/instructor mechanical, electrical , motorcycles through to including flight, you are an excellent instructor!!!! Extremely well done!
This was the only video that correctly demonstrated how to remove the fixture and change out the light bulb. Thank you for your help. 👍
Thanks for making this video, helping my wifes friend and I was getting so pissed...hitting the nuts to get the corner to release was great advice. Thx
I could not have completed this task without your tip of keeping the nut on the end and smackingit!! Thank you sir!!
thanks! I'll give it another try in the morning. The trick is the tapping! This girl appreciates you.
Dude the tip to hammer on the bolt is genius. Popped right out for me. I've changed bulbs a few times on my 2017 and dealt with struggles. This worked perfectly. Thanks a million.
Okay
THANK YOU for the tip on tapping the screw!! My roommate and I were having the hardest time trying to get the light fixture out until we saw your video
Wow, you made this look so easy. And it was! Even this 64 yr old Grandma did it. Thank you! 😊 You are a great teacher! 👍
Very helpful trick, watched this after a mechanic couldn't get it off and told me to take it to the dealer. Took a few rounds of hammering but was so satisfying when it popped off. Thank you!
Woo diy Videos like this saves us from mechanics trying to rip us off 😓 thanks for the vid 😌
Thanks for that tip! I was struggling so much getting mine out. It did start to strip the end of the bolt but I may have screwed the nut off too much. But now I have a working break light. I appreciate you
Sooooo glad I looked at this before trying to change my husband's brake light. You explain everything very well!
You were trying to change the brake light?? Not him?
Great video. Our brake light went out and before I attempted changing it I found this video. Very glad I did. 5 stars!
Well done. Thanks. Tapping the bulb assembly out from inside the trunk is much easier than trying to pry it out from the outside.
2:45 great bro. Mines was hard to take out. This method is awesome
That tip to get the tail light out worked like a charm! Thank you for that.
You're a charm
Just bought an alantra with a blown left blinker bulb, you were a GREAT HELP. Thank you for a good video.
I'm sooooo glad I watched this before replacing my tail light. Thank you so much.
Thank you so much for the video. It same me time, headaches and money by avoiding a visit to dealer to replace a light bulb. God bless you.
It was 3:33 on his watch that’s how I know this was the right video
ARRGGGG! I wish I saw this 2 lamp assemblies ago. Simple and easy. Your a genius.
No kidding. Thank you!!!
@@TheDr1066 Absolutely genius! thanks man. wish I saw this before my two difficult replacements. haha
Great vid my guy! Best instruction so far will be doing this way after work
This video is great, I can't say the same for the layout of the car. The most complicated light bulb compartment by far and this is my 3rd car.
Wow. This is so clear and concise. Love the trick. I’m gonna try today but thank you so much.
Wow I tried to take off the white pins whereas they aren’t supposed to be out 😁 thanks for the video 🙌🏽
This is exactly what I needed, thanks for breaking it down and showing how to do it all so simply!
Its not that easy. Several people did exactly what he did and the light would not come out. I have seen dealer mechanics try it and needed additional help from other mechanics to get it off. Its not as easy as you think. The steps are easy but not actually doing it.
Thx so much for the tip on how to remove the lens. Genius! It worked for me. Without the tip, I would’ve been there for days and probably would’ve given up. A tip for other users: Use a hammer if the socket head doesn’t work, and tap hard. It really does require hard taps, but eventually it will let loose. Thanks again my friend!!
You're a genius
Thank you... So easy I'll do it myself. And never pay for another light bulb install.
Excellent. All I needed to know about this process is in this video,
I'm pretty upset that I didn't think of this. Brilliant. You are much appreciated.
Thanks! Great video start to finish! Was smashing the shit out of the bolts with a hammer didn't work. Ended up yanking it off with a zap strap. Took quite a bit of force.
Thank you much, I thought I had to remove part of the trunk liner. Ufff you made it super easy. Thank you again bro
Glad I watched this prior to doing it myself. Thank you!!!!
Thank you, for your help. You made it so much easier.
Mines was super hard so I stopped to avoid breaking it,, ima going to try your method 👍🏽
Thank youuu😊 How did you know we needed this video? We were STRUGGLING to get that light off to change the brake light bulb. We tried the screwdriver🪛 to pry it open too😆 When we hit it with a hammer....GENIUS!!!! Keep the videos coming. We appreciate YOU!
Thank you so much for the break down. A huge help. Cheers my friend.
This is a great and detailed video on How to get that tail lamp off, yes it’s extremely hard to get off, I took mine to my gas station and took 2 guys to get it off, I wish I discovered your hammer trick earlier. Subbed to your channel:)
Great vid buddy! Descriptive and to the point!
Great job. Comprehensive yet concise instructions. Thank you.
This video saved my patience lol!!! Thank you so much!!! Awesome tip:)
Tapping the fixture out didn't work exactly for me but I did find another trick on the internet that helped. Get three 24 inch long strips of duct tape and stick half of the length to the outer tail light. You should end up covering a good portion of the surface of the light and have the three "tails" of duct hanging out. Once you've loosened the 10mm nuts and unplugged the electrical, pull and tug the duct tape backwards and the fixture will just pop out.
I couldn't get the damn thing out, even with a hammer-- but the duct tape worked like a charm! THANK YOU.
Bro thanks for the tip… will the duct tape leave glue residue on the light?
👍
@@Pedronqr I was gonna ask the same thing!!
Bless your soul this helped me out so much
This is exactly what I needed to see thank you
Thanks, I'm doing 2018 brake lamp today👊🏾
Thank you!!! Appreciate it!! I did it all by myself
Awwww Omg!!! I love you!!! Thank you so much for posting this this!!!!!
Thanks for doing this.....BIG help and sped up my repair!
excellent! thanks, clear, concise, nice trick too!
Very easy to follow! Thank you!!! 😊
Thank uuuuuu!!! Just got it done!!!!
This video just cut so much struggle time out for me. That hammer tip blew my mind. THANK YOU
This video made it so easy for me. Thank you
Great video, clearest instructions I've found
Great video thanks a lot!!!! Really helpful
Thank you SO much. I changed by brake light bulb all by myself!! Great video😊😊
Very helpful, thank you!
Thank you for this great tutorial video!!
Extremely Helpful 🙏
Excellent instructions. Thank you so much!
Thank you for this friend !
2:55 50 Cent! Giving some great tips. Thanks!
This video is the best, thank you!
Excellent video. about to try it out.
It's worked! Thank you.
Good trick. I saw one video that said you have take bumper off. I like your way better. Mine just went out. Thanks
Taking a bumper off for changing a light bulb. My goodness. I personally think Hyundai messed a big time designing this housing. I understand safety is required and you want to make sure the housing stay intact in its place. But this is far too stupid why not just install two more bolts making sure that stays together than this plastic crap.
Thank you! Very simple and easy! :)
Its not that easy. Several people did exactly what he did and the light would not come out. I have seen dealer mechanics try it and needed additional help from other mechanics to get it off. Its not as easy as you think. The steps are easy but not actually doing it.
Thanks for the tip.
Thank you! This was easy to follow and worked perfectly on my 2017 Elantra.
what number bulb do u get
Worked for me. Thanks!
Thanks a lot , this tip helps me today .
Thank you for sharing your knowledge. It's saved few dollars from my pocket.. Cheers Bro!!
Thank you man, didn't know it was that easy. Appreciate it 🙏🏽
Its not that easy. Several people did exactly what he did and the light would not come out. I have seen dealer mechanics try it and needed additional help from other mechanics to get it off. Its not as easy as you think. The steps are easy but not actually doing it.
@@starttofinishpodcasting3721 I have a hyundai elentra 2017, the mechanic I went to didn't know how to pop the taillights out. I watched this video, I used a hammer to hit the screw only once, and then the taillight popped out, it wasn't hard it only took me about about 2 minutes to replace the burnt bulb. I think your point is for some cars it's easy but for others they have different methods
Thanks Dulha i was lost now I'm not
Cuz of u
My hero for the day
Thank you for the tip.
Great video and info. Thanks for sharing
You are awesome, thank you so much!
Thank you!
Mine were very stubborn.
Bruh the smashing the nut was a great idea but it ended up stripping the nut stuck onto the bolt and however the bolt is held into the housing must have broke because now the entire nut and bolt is spinning. Gonna try a zip tie to take it off like someone else in the comments later.
AAHHH this saved my career 🤣
Useful information thank you
Thanks for sharing brother 👋🏻
Great video thanks for sharing
You are the real mvp
Very helpful. Thanks
good tip, thanks bro
Helpful thanks 🙏
Thank you so much +1 sub😊
Whattt that easy I was tryna take it out for a hour, I gave up until I say this video lol
Great tip best video
Simple the best 👍👍👍😊👍
Thanks very good video.. I did already 🙏
I was hammering so hard I broke my socket wrench lol guess I'll have to go to the mechanic after all
Wow easy after watching
Thank you so much..I had to use a hammer to back out the studs. Also my 10 mm nuts were hand tight and easy to remove. My car is a 2018.
Tried this exactly the way you did and the light didn't budge! The light was taken off and changed the bulb already at the shop and now its still as hard to come out
What if the reverse light works but the brake light doesn’t? I changed the bulb but the light still doesn’t work. Do I need to replace the entire tail light?
hey guys, what kind of bubs do I have to buy for the tail light.
Amigo...your a genius....yesterday I came back home ...neither my daughter or wife told me about the light on the dash...until I drove the car.
I have a slight idea how to do it .
But I think I will struggle a lot if I don't see your video first....muchas gracias
Another dead end for me.
Even though both my brake lights have already been replaced, The housing is difficult to remove even using the trick in this video. Before I didn’t know that there’s actually a different kind of a clip that holds together the side housing. Despite trying everything I have another failure.
I went to the mechanic who I have been to for same issue before even he doesn’t want to get his energy wasted trying to prop open this garbage.
Next time which ever mechanic opens this housing for me, The first thing I’m going to do is break that side housing clip so I don’t need to go through this much of torture just to replace a bulb.
Hey where can I buy those little white clips
Thank you