Good design but, your soldering technique needs a bit of work. Try using shorter leads on the end of your cables and thinner solder. That and tend your leads before making final connections. This will cut down greatly on cold joints. Other than that, your saber is pretty rugged and badass!
thanks ill try, my soldering tool the one that gets hot was broken tho it was barely keeping itself together and broke just after filming the last part. i got burnt badly xd
I really dont get how you do with the led strips, im looking to make a lightsaber and have 3d printed the handle, bought the pipes and now i am looking at led strips but i dont get what he does because what from what ive seen there are only led strips that need connection to the wall or am i weong about that???
well, I don't really get what u mean by the "wall" and overall not sure whats the question but I can kinda describe what went into the led assembly. first of all, u have to decide if its rgb or just one color LEDs, get as much led bulb density as possible as this will create the more even light effect and stuff, pretty obv. in my case i did both rgb and single color, the single color is just LED strip -> mini Tamiya connector -> battery (this means that as soon as the battery is in, the lightsaber is on.) on the other hand the rgbs are connected to the receiver bc u need to control them via the remote so it would be LED strip -> Mini Tamiya connector + receiver. not sure if that answers ur question but if u have any more just write it here
Zrób kilka takich do sprzedaży np.10sztuk i sprzedawaj po 200/300zł jak zarobisz podnieść ceny bo więcej osób będzie chciało kupić i jeszcze robisz je ręcznie. Będziesz miał duży zysk i kontynuujesz produkcje
i think maybe the camera changed from drone to phone a few times. also most of drone shots were recorded during the evening as oppose to the daylight pictures taken by my phone. battery was draining during this 2-3 shooting day period and I didn't charge it even once maybe that's the case here. i didn't modify the footage to enhance the brightness of the lightsaber or anything like that, I wouldn't even know how ._.
so I’ve been keeping an eye on this video for almost a year and I was wondering, would you ever consider making this and selling? I wanted to get two and I just think handmade is so much better in this way and I wanted to gift it to a friend! I would 100% cover costs and shipping and all that I just think you did amazing. Really hoping you’ll be able to see this. CHEERS!!
I know it takes time but I’d honestly trust no one else to do this and am willing to pay reasonably XD even though it’s been years since u posted I’m just trying my luck
Well, I didnt intend to sell them as I made them and the video just for fun of doing the lightsaber itself. I am not using them, I moved away from the place where I made them and they stayed. If you interest in them is not going to fade in 2-3 months we can talk about buying it. By Christmas I will be home and we can talk by then! feel free to message me through IG or here :D
na moim kanale jest drugi taki sam film tyle że po polsku, wydaje mi się że tam na rozpisce widać było że za 2 wyszło ok 400 razem z bateriami itd wiec ok 200 za jeden jeśli dobrze pamiętam
so your tubing link does not work for me and I found a new link but if you could, could you help me with choosing the diameter on this link so that it's a similar/identical size to yours
@@joaoantoni6191 i think technology changed slightly since i made the video, do a small research but the most important thing is that the led bulbs need to be as dense as possible, the more leds/meter the better, it will be smoother lighting. If you want to go hardcore u can try using the nanoLED that can be programmable with airduno and then u can create stuff like animating lighting and some other cool effects. it doesn't have to be the one I used, I used this one bc it was just quite okay for me in terms of amount of LEDs and brightness
U can duel, thats why I used Polycarbonate tubes and not Plexiglass ones, but idk about heavy dueling, I'm not rly concerned about the blade itself more about the screw connection to the handle and stuff like that, but if you would glue the blade to the handle it shldnt give even in heavy duel
Kiedy w nocy widziałem twój miecz postanowiłem go wykupić za 1000 PLN, mam nadzieję że jesteś chętny jak na takiego świetlnego miecza, tak poza tym taką cenę postanowiłem za twoją ciężką pracę i włożony w miecz serce, nie musisz się zgodzić ale szukałem takiego od dawna prawie 4 lata no i znalazłem idealny miecz, mój wuj prowadzi firmę animatorów dzięki pracy w niej mogę wykorzystać twój miecz do stworzenia animacji tam mam wszystko czego potrzebuję do z animowana tego miecza świetlnego i do stworzenia nowej serii na RUclips ze Star Wars czyli Gwiezdnych Wojen ale jeżeli nie chcesz się zgodzić mogę podwyższyć cenę albo nie zgadzaj się jeśli nie chcesz.
Nie mam potrzeby sprzedawania tych mieczy ale cieszę się, że chcesz go użyć w jakimś ciekawym projekcie, więc myślę, że możemy się dogadać. Który z nich Cię interesuje? RGB czy standardowy niebieski? Niebieski świeci mocniej ale no jak wiadomo tylko jednym kolorem.
Tracing paper was a 10/10 for me, I tried few different things but I couldn't get the effect I was going for a while. the tracing paper doesn't go yellow as time passes, doesn't melt when leds are placed close to it and it diffuses the light pretty well, if you have a paper store nearby I would say its really worth a try
![ATEEZ(에이티즈) - [GOLDEN HOUR : Part.2] Preview](http://i.ytimg.com/vi/X4PfgRPBUVo/mqdefault.jpg)
Your English is great seeing as though it is not your native language! Thank you for the tutorial!
its trash, but this was kinda long time ago and I might have been stressed xd
Good design but, your soldering technique needs a bit of work. Try using shorter leads on the end of your cables and thinner solder. That and tend your leads before making final connections. This will cut down greatly on cold joints. Other than that, your saber is pretty rugged and badass!
thanks ill try, my soldering tool the one that gets hot was broken tho it was barely keeping itself together and broke just after filming the last part. i got burnt badly xd
"Impressive. Most impressive."
Impressionante o seu trabalho, ficou top!
This is amazing dude, thanks!
Hahh, thanks
Dude, back yard slightly dark and you wielding the lightsaber.
Yes, so many times yes. Yes.
Thankss, I totally agree that shot deserves appreciation. It was very cold tho, still worth it
This video made a fine addition to my collection.
Ah, I see you're a man of culture as well.
how many centimeters of polyethylene did you use? I'm making one of the second sister with two blades
Can't really say, I would assume that a roll has 100cm width and you do a few turns around the blade with it so let's say 15cm of it will be used
cześć,podałbyś polską nazwe materiałów z których korzystałeś aby rozproszyć światło w samej klindze?
wydaje mi sie ze na tym kanale jest polska wersja tego filmu i tam sa nazwy wszystkich produktow i nawet linki do allegro jesli sie nie myle
How much volt are you using for the light strip?
well the battery that I used is Li-Po 11.1V 3S 1200mAh 25C / 50C to be exact, its just wired straight to the LEDs like in the vid
@@kyotic6366 Massive thx
I really dont get how you do with the led strips, im looking to make a lightsaber and have 3d printed the handle, bought the pipes and now i am looking at led strips but i dont get what he does because what from what ive seen there are only led strips that need connection to the wall or am i weong about that???
well, I don't really get what u mean by the "wall" and overall not sure whats the question but I can kinda describe what went into the led assembly. first of all, u have to decide if its rgb or just one color LEDs, get as much led bulb density as possible as this will create the more even light effect and stuff, pretty obv. in my case i did both rgb and single color, the single color is just LED strip -> mini Tamiya connector -> battery (this means that as soon as the battery is in, the lightsaber is on.) on the other hand the rgbs are connected to the receiver bc u need to control them via the remote so it would be LED strip -> Mini Tamiya connector + receiver. not sure if that answers ur question but if u have any more just write it here
Zrób kilka takich do sprzedaży np.10sztuk i sprzedawaj po 200/300zł jak zarobisz podnieść ceny bo więcej osób będzie chciało kupić i jeszcze robisz je ręcznie. Będziesz miał duży zysk i kontynuujesz produkcje
niestety nie mam na to czasu, nie mieszkam juz w polsce wiec to tez pewien logistyczny problem
Szkoda sprawiłbym sobie taki
how is the led so much brighter in some shots but not that bright couple of seconds after?
i think maybe the camera changed from drone to phone a few times. also most of drone shots were recorded during the evening as oppose to the daylight pictures taken by my phone. battery was draining during this 2-3 shooting day period and I didn't charge it even once maybe that's the case here. i didn't modify the footage to enhance the brightness of the lightsaber or anything like that, I wouldn't even know how ._.
Using the Thermomix as a Weight scales I like it
Thats some high level of engineering, if you ever wondered how SpaceX measures their space stuff now you see
so I’ve been keeping an eye on this video for almost a year and I was wondering, would you ever consider making this and selling? I wanted to get two and I just think handmade is so much better in this way and I wanted to gift it to a friend! I would 100% cover costs and shipping and all that I just think you did amazing. Really hoping you’ll be able to see this. CHEERS!!
I know it takes time but I’d honestly trust no one else to do this and am willing to pay reasonably XD even though it’s been years since u posted I’m just trying my luck
Well, I didnt intend to sell them as I made them and the video just for fun of doing the lightsaber itself. I am not using them, I moved away from the place where I made them and they stayed. If you interest in them is not going to fade in 2-3 months we can talk about buying it. By Christmas I will be home and we can talk by then! feel free to message me through IG or here :D
@@lemon-hf5eo A Coworker of my Brother wants to Build one and my Brother and I will join him. Maybe there is a way we can Build one spare
Ile to łącznie kosztowało w złotówkach?
na moim kanale jest drugi taki sam film tyle że po polsku, wydaje mi się że tam na rozpisce widać było że za 2 wyszło ok 400 razem z bateriami itd wiec ok 200 za jeden jeśli dobrze pamiętam
@@kyotic6366 dzięki
so your tubing link does not work for me and I found a new link but if you could, could you help me with choosing the diameter on this link so that it's a similar/identical size to yours
well, I think that in the vid I gave the size of the tubes i used, but if somehow i can help u more then sure, feel free to ask
@@kyotic6366 yeah it's just that on here: www.theplasticshop.co.uk/polycarbonate-tube.html , on the diameter section i am not sure what to choose
@@juststanhere9658 from this website id take the 30od28id and 18od14id pipes
@@kyotic6366 thanks!
Which battery did you use? And tell me her specifications?
[Battery Li-Po 11,1V 3S 1200mAh 25C / 50C]: that's the exact spec if I remember correctly, its just a lipo stick battery with a mini Tamiya connector
@@kyotic6366 The led strip can be any one or does it have a specific one? Thanks
@@joaoantoni6191 i think technology changed slightly since i made the video, do a small research but the most important thing is that the led bulbs need to be as dense as possible, the more leds/meter the better, it will be smoother lighting. If you want to go hardcore u can try using the nanoLED that can be programmable with airduno and then u can create stuff like animating lighting and some other cool effects. it doesn't have to be the one I used, I used this one bc it was just quite okay for me in terms of amount of LEDs and brightness
Can you heavy duel with these
U can duel, thats why I used Polycarbonate tubes and not Plexiglass ones, but idk about heavy dueling, I'm not rly concerned about the blade itself more about the screw connection to the handle and stuff like that, but if you would glue the blade to the handle it shldnt give even in heavy duel
Thanks
Kiedy w nocy widziałem twój miecz postanowiłem go wykupić za 1000 PLN, mam nadzieję że jesteś chętny jak na takiego świetlnego miecza, tak poza tym taką cenę postanowiłem za twoją ciężką pracę i włożony w miecz serce, nie musisz się zgodzić ale szukałem takiego od dawna prawie 4 lata no i znalazłem idealny miecz, mój wuj prowadzi firmę animatorów dzięki pracy w niej mogę wykorzystać twój miecz do stworzenia animacji tam mam wszystko czego potrzebuję do z animowana tego miecza świetlnego i do stworzenia nowej serii na RUclips ze Star Wars czyli Gwiezdnych Wojen ale jeżeli nie chcesz się zgodzić mogę podwyższyć cenę albo nie zgadzaj się jeśli nie chcesz.
Nie mam potrzeby sprzedawania tych mieczy ale cieszę się, że chcesz go użyć w jakimś ciekawym projekcie, więc myślę, że możemy się dogadać. Który z nich Cię interesuje? RGB czy standardowy niebieski? Niebieski świeci mocniej ale no jak wiadomo tylko jednym kolorem.
interesuję mnie ten co świeci mocniej ten standardowy niebieski niesłychanie efektywny miecz na końcu filmiku.
Napisz do mnie na instagramie „adamcal98” albo przez mail businessadamcal98@gmail.com żeby dogadac szczegóły
okej napisze
@@okko3480 Inny mail: businessadamcal@gmail.com
Ten drugi nie jest już aktywny, sorki
What’s the song 2:00
original is buttered popcorn by supremes but i dont really remember if i used some kind of a remix here
the individual lights on my strip lights still show. i’m use if wax paper, does using tracing paper make the difference?
Tracing paper was a 10/10 for me, I tried few different things but I couldn't get the effect I was going for a while. the tracing paper doesn't go yellow as time passes, doesn't melt when leds are placed close to it and it diffuses the light pretty well, if you have a paper store nearby I would say its really worth a try
@@kyotic6366 ok thanks!