Както винаги - ПЕРФЕКТНО видео! Хубаво е да се свали и отделно да се изчисти машинката за празен ход. Поздрави от България и благодаря за перфектното видео! 👍👍👍
Nice little Video.I've found that stubborn Carbon deposits can be removed with a mixture of Acetone,Vinegar and cheap Cola.Just soak for a few hours.Thank you for sharing .
Thanks, as always, for the video. It was very useful for the intervention I made yesterday on my 206 1.4 from 2001. Compared to what you showed, I added two things: I also disassembled and checked the two elements attached to the throttle body. The idle motor and the idle sensor. Having learned from you to always disconnect the battery, I then cleaned the electrical contacts and put electrical tape on the cables. Bye!
Good day, I cleaned the throttle body of my peugeot 307 petrol vehicle before, but there was a problem, the idling in lpg rises by itself, 1500 rpm comes on its own. Thank you for the information you provide.
Hi my I'm going to replace my 206's throttle position sensor, after replacing do I need like to calibrate the car?(if yes, how will I do that?) or the ECU will automatically detect the new sensor and reset it? My car is not reaching 2500rpm atm and it detects issue on the tps. thanks
It is better to take it off and clean it. If you clean it when it's on the running engine, all the dirt and cleaning fluid has to pass through the engine which is not good.
Както винаги - ПЕРФЕКТНО видео! Хубаво е да се свали и отделно да се изчисти машинката за празен ход. Поздрави от България и благодаря за перфектното видео! 👍👍👍
Thank you for watching ! 👍
Nice little Video.I've found that stubborn Carbon deposits can be removed with a mixture of Acetone,Vinegar and cheap Cola.Just soak for a few hours.Thank you for sharing .
Thanks for the info!
Thanks, as always, for the video.
It was very useful for the intervention I made yesterday on my 206 1.4 from 2001.
Compared to what you showed, I added two things:
I also disassembled and checked the two elements attached to the throttle body. The idle motor and the idle sensor.
Having learned from you to always disconnect the battery, I then cleaned the electrical contacts and put electrical tape on the cables. Bye!
Good tips, thanks for watching !
Good day, I cleaned the throttle body of my peugeot 307 petrol vehicle before, but there was a problem, the idling in lpg rises by itself, 1500 rpm comes on its own. Thank you for the information you provide.
What is the purpose of cleaning the throttle body ? How ofter is it recommended ? Thank you for the video!
If I arleady cleaned it and after some months the car randomly shutdown when ride I need to replace directly the throttle body ?
Yeeeaaahhhhh very very good sometime mine it tic tac tic tac when i dont utilise my 206 for long Time
Thank you so much.
You're welcome!
👍
should clear the throttle position sensor code , hopefully
thank you the video is good to clean in how many years 🙏🙏
Hi bro, can i know where is the location of intake air tempreture sensor for this car model?
I think the air temperature sensor is combined with the manifold air pressure sensor: ruclips.net/video/d6VDY-Q8eec/видео.html
Hi my I'm going to replace my 206's throttle position sensor, after replacing do I need like to calibrate the car?(if yes, how will I do that?) or the ECU will automatically detect the new sensor and reset it?
My car is not reaching 2500rpm atm and it detects issue on the tps. thanks
Some cars calibrate the new throttle body automatically. Check this link: cartipsdaily.com/does-a-new-throttle-body-need-to-be-reprogrammed
Is it possible to clean it without having to open the lid and the parts? How is that? Explain the boring detail
It is better to take it off and clean it. If you clean it when it's on the running engine, all the dirt and cleaning fluid has to pass through the engine which is not good.
@@screwsnutsandbolts thank you
How to figure out if I need to do re-learning/reprogramming procedure after changing the throttle body?
Also how to find the right procedure for my car which is exactly the same as this one in the video
I think you need to use a specialised scan tool but I'm not sure to be honest, sorry
Adaptasyona gerek varmidir
If it's a new throttle body, yes
He didn't show how to re collaborate the rpms as u gotta do that after
So much trouble for nothing...the sensors ought to be removed in order to clean thoroughly the throttle body.