Phosphoric acid is the most common rust remover. It's also in Coke, just at a different concentration. Things aren't always as toxic as they seem. Clever chemistry for the win.
That’s called acid picking H2SO4 or HCL (more common) Plastic balls are meant to avoid/reduce acid fumes and heat isolation ( energy ). Cables will eventually corrode
These balls are called tank floats and or mist control balls. They're made from polyethylene. They reduce mist in plating applications, reduce fumes, heat loss, evaporation, drag out, and exhaust maintenance.
Acid takes the rust right off, once the rust leaves, you clean it Thoroughly in a mixture of cold & hot water but mainly cold. To keep it from rusting once out of the water, dip it in a lubricant oil that prevents rusting again
@@johanneskepler1you're a very cold, judgy person and I would never invite you to a party. Anybody who can't find a system of a down song they like isn't real and was born without a soul, sorry. We been here longer lil zoomer we can tell the fakes
@@johanneskepler1You are still typing in gibberish.. I love how SOAD only gets hate from red blooded conservatives, claiming they’re too “political” but will try to make you listen to Tom MacDonald. 😂 Oh, the hypocrisy.
@@johanneskepler1trash compared to what? there's nothing that sounds like them vocally or instrumentally. are we comparing them to modern rap/pop music then?
@@BrainyThyme3869 no it's a big block. The lifter bores are canted, three soft plugs in the side, various casting do-dads, the outline of the deck surface...
Yea okay buddy. That is not no week long rust. They do whole car body’s and chassis with this method too. They have no reason to fake this because it’s real
I'd agree - the rust coverage was very uniform and pale - if I were a betting man I'd bet they soaked it in a weak acid solution to accelerate the process. A naturally rusted short block would not be uniformly rusted like this one is.
Is there really that much of a crossover? I see a lot of this online but never in person. I'm more into alternative hip hop these days but have always liked anything that isn't country. Ironic since I grew up in the rural south but yeah metal, nu-metal, and grunge rock were my favorites as a kid. It gets hard trying to pick music around newer freinds because one minute we'll be vibing together then my next song makes them wish they were deaf lol
@@kingmusa5516 Toxicity by System of a Down. I'm loving the new interest in the stuff I grew up with, just turned 20 but yall got me feelin all nostalgic.
@@johne189 348? I know the GM small blocks as 283, 327, 350, 355 (30 overa 350) and 383(Stroker) and the 400. Proportionally I lean in the way of a small block.
@Netscape Navigator Well that depends on how far of a drive it is to the nearest machine shop that has a hot tank. If you have one close and they don't charge a ton of money to hot tank a block, do that. If that's not the case, I would take some rustoleum rust dissolver (it works really well) and spray the shit out of the block on a stand, then pressure wash it off. The only place you really have to focus on are all the bearing surfaces and the cylinders.
@@patrickomann3580 I doubt they switched it out just for a youtube short! It might have spent a day or two in the tank and plenty of work around the shop could have occurred in which they might have moved the ladder for.
@Quentin Mallard Ok smart guy. How would you have done it differently? Because, I'm not so sure it's how you say it is. So if you can't just "wipe it off" ... then what?
Ironic song choice 😅 ☣️⚠️ I always wondered what happens to all the crazy toxic fluids ? Do they have to be taken away in special marked barrels before we pay Al Gore to carefully and responsibly despose of them .... by throwing them into the ocean?
@@taylorebenguard6998 Well, I work on many fleet and other random trucks. There is blow by, front and rear crank seals, gear housings, head gaskets, hydraulic pumps and hoses, Oil coolers, autolubers and so on that all can make a mess. No, rust isn’t an issue on some of these but a lot of times its more than just tightening oil pan bolts.
@@tumblevveed3586 you’re right it is usually a lot more than that i’m just saying the easiest things anyone could hopefully do before taking it to someone of course though then again half of a america cant change their own oil which is kinda sad but yeah i mostly just saying the simplest thing that could be tried before really getting into it and tearing the engine down
@@taylorebenguard6998 Alot of people are best off not even attempt to fix anything. You ever watch the channel "Just Rolled In"? that's why I say that.
@liam Anderson If I don't know anything, I either try and do as much research about the subject matter as possible, or use basic principle of physics. Just jumping into something without having any knowledge about it is asking for a bad time.
You can do the same thing with a battery charger, Some kind of electrolyte (Lye, salt, Etc.), some steel rebar, and a container large and strong enough to hold the block and that much water.
My boss often plays this song at work and every time I hear it I get goosebumps especially at the end of this song!! Like it never fails lol. What a awesome song
Now how do you guys keep the metal from flash rusting. I ask bc I use a ultra sonic cleaner to clean old tools and things and they flash rust over night. Even if I soak them in oil or wd-40
After rinsing with water to neutralize the acid spray it with WD-40 while it is still wet, then dry with a blow gun. If painting afterwards wipe down with solvent after drying. Do not blow dry before spraying with WD-40, instant flash rusting will occur.
Original WD40 displaces moisture but does not protect from condensation. Coat metals in actual light machine or mineral oil to displace moisture in the pores of the metal which cause the flash rusting. Allow to sit for 5 minutes and wipe off the excess. WD40 is only good for breaking surface rust and keeping electrical connections lubricated.
Ok...try it before you say no. Boil a pot of water and drop the flash rusted part right in. The rust will turn black and stop. It's an old method of blueing.
@@TomokosEnterprize That is even better. There is still no replacement for displacement, regardless of what the 4 cylinder, turbo charged, putt-putt engine owners say. I call the tiny, turbo charged, engines, grenades. So far, they have been proven true to their nickname. GM and Ford should consider a recall. Four cylinder engines with turbos have always been problematic. But they keep coming back.
Hey do you immediately coat the metal with some sort of rust preventative? I've seen whole cars dipped like this and I was always curious how they prevented it from immediately corroding from the moisture in the air before paint
Steel and iron are usually stripped and degreased with a hot caustic wash. This is allowed to flash rust before it’s dipped into hot phosphoric acid. This converts the rust to iron phosphate which bonds extremely well to the metal.
Great Q & A! Thought I’d add too questioner that if u go too this dudes YT channel, he’s uploaded several many vid’s of whole car bodies gettin’ dipped & washed, among the other various items he’s dipped.. can be somewhat relaxing to watch these steps. After seeing several of his uploads, I’ve come to the conclusion that I’d personally prefer now to have my own classic cars’ body parts dipped, instead of media blasting them!
You gotta have some balls to do that.
Manually 💀
Grab em with your bare hands and dip em in
Correct
black ones though...
They''re there to decrease surface area to minimize evaporation...
Lots of big acidic balls.
I love hearing "The toxicity" as it goes in the chemical bath. I'm sure chemicals powerful enough to remove rust like that could be very toxic.
Allow me to introduce you to my best friend, Table Vinegar.
@@TimeSurfer206 super powerful
@@TimeSurfer206😮😮😮😮😮😮😮😮😮😮في 😮😮😮😮😮😮😮😮قبل من 😮😮😮😮😮😮
@@GjdjjKjhdh We serve a Merciful Lord: He has given us a world with Coffee on it.
Alhamdulillah!
Phosphoric acid is the most common rust remover. It's also in Coke, just at a different concentration. Things aren't always as toxic as they seem. Clever chemistry for the win.
Hearing System Of A Down in a viral video is the best thing ever
Fac
It’s one of there radio songs but it’s still cool
Real
Соглашусь
Now I got in my head for the next 3 days !
Bro made the hardest engine ball dipping edit and thought we wouldnt notice
That’s called acid picking
H2SO4 or HCL (more common)
Plastic balls are meant to avoid/reduce acid fumes and heat isolation ( energy ).
Cables will eventually corrode
Ohhb u soooooooo smart
I thought plastic balls are just to reduce evaporation
Perfect. Thankee. I was just wondering what the balls were for.
I cook with 98% HCL. we make chemicals for water purification and sewage treatment
Pickling process. HCl...
Plays toxicity as he puts a motor into toxic fluid 😂
lol
@thatdood420 what's that liquid?
@@thefuture4956 toxicity
@@thefuture4956 bog water
@@rodloberg6282,kuwjwjduwush😮😮😮
It’s called “rust removal,” and the balls reduce evaporation, without obstructing the tank.
Thanks much. I learned something new today! 👍🏽
Thanks for answering my question
So like a lid but you can still put engines to remove rust. That's genius.
These balls are called tank floats and or mist control balls. They're made from polyethylene. They reduce mist in plating applications, reduce fumes, heat loss, evaporation, drag out, and exhaust maintenance.
Thank you ,I can sleep now 🤣🤣🤣
Props to the camera man for dipping himself along with it 👏
Шарики нужны чтоб не испарялась жижа если кто не понял)
Thanks, I’m glad I clicked translate
Я думал чтобы брызг не было)
Академик,что за жижа?
@@RUclipshndl you’re welcome
@@kirill_karpov
Кислота крепкая...
Конечно испарения от неё ну очень опасные.
Acid takes the rust right off, once the rust leaves, you clean it Thoroughly in a mixture of cold & hot water but mainly cold. To keep it from rusting once out of the water, dip it in a lubricant oil that prevents rusting again
Im pretty sure they’re aware
Bros giving tips💀
Hahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahagagagwgw
😢
I’m pretty sure that a different block it’s an edit
These are the balls that stick to Mr Incredible “Bob” when he was trying to escape Mirage
Thank god someone else said that 😂
😢😢
Great. Now i gotta listen to the whole album. 🤦♂️😂🤘
Whole album? I think you meant to say every SOAD song as well as all Serj Tankains songs
@@lumpyzx2645 only had about an album's worth of time when I said that. But you _do_ have a point...
And Daron's band's 2 albums. And all of the covers and parodies.@@lumpyzx2645
“I thought the balls will go inside the holes”😭😭😭
I think they just stop splashing acid
Bro same I thought it was gonna be some oddly satisfying type video
Yeah, kinda lame that the balls were too big for the cylinders..
@@herobriny4359 99o9
😊
Forbidden ball pit
I mean look how clean the block got... 2 minutes can't hurt🙄
@@GlutenFree-e I just love the HOT. WET. BIG. BLACK. ball pit
Most underrated comment
@@GlutenFree-e maybe it can clean your balls
@@E_Rico can't hurt🧼🏀⚽️
System of a down never gets old lol
Bro it’s an engine block transformation chemicals dipping video, it can’t be older
@@johanneskepler1"Might even can be considered" You are here trying insult them with that gibberish comment
@@johanneskepler1you're a very cold, judgy person and I would never invite you to a party. Anybody who can't find a system of a down song they like isn't real and was born without a soul, sorry. We been here longer lil zoomer we can tell the fakes
@@johanneskepler1You are still typing in gibberish.. I love how SOAD only gets hate from red blooded conservatives,
claiming they’re too “political” but will try to make you listen to Tom MacDonald. 😂 Oh, the hypocrisy.
@@johanneskepler1trash compared to what? there's nothing that sounds like them vocally or instrumentally. are we comparing them to modern rap/pop music then?
The mighty Big Block Chevy. Some classic sheetmetal in the background too. Doing God's work.
That looks more like a small block Chevy to me
@@BrainyThyme3869 no it's a big block. The lifter bores are canted, three soft plugs in the side, various casting do-dads, the outline of the deck surface...
@@BrainyThyme3869it's a big block
A lot of iron there.
preach 🙏🏾🙏🏾🙏🏾😂
no joke this man is CULTURED AS F__K he used an actually good song congrats you're now part of a secret group.
By wrhhhgĝamzsngrewwй
You shouldn’t have said anything just to see if it was a fluke
That motor has balls
More balls then your dad and a whole classroom combined
Lol
jajajaj
literal 🤙
Nothing beats a small block Chevy
That's one CLEAN transition
Right how did he even record tho?
@@phila9479 with his camera
@@BTE_studios ggyh
@@BTE_studios Smart ass lil pony
@@arvindrathod1346what that word supposed to mean
" Can you give me pearls with my boba"
The pearls:
Song name: toxicity
Band: System of a Down
Very good band I love the music and metal
From me it is recommended if your into metal
what if i'm into you?
the comments :
vidéo ✖
toxicity ✔
3
jdbbbhhjnnmmhghhhv bc chn bh cm hhkjjhn. jkjjbbbbbbbbcshnngjghhghhbdhfh yj jr tu hhrfhr w
"It's brand new right?"
"Yeah, it is 100%."
My dad worked for a chemical finishing plant for years, came home with some pretty bad burns a few times 😢
My dad was working on a site bulding, came back with brain injury behavioral disorder loss of taste loss of smell and broken meniscus. Be grateful.
7dıjgrı تلمقمزةلباترنلبلعقميتنى
Be careful, you got some balls in your engine block
That block looked like it had been sat outside for a week to give it nice coating of surface rust so it looked better coming out of the hot tank.
Nice for pointing that out!!!!😯🤯
Yea okay buddy. That is not no week long rust. They do whole car body’s and chassis with this method too. They have no reason to fake this because it’s real
@@AlieNateInc It's not faked - they just augmented the impression that block would have made without the extra rust. No harm done...
How long is it in the tank for usually.. I'm going to guess at least 24hrs going of that background
I'd agree - the rust coverage was very uniform and pale - if I were a betting man I'd bet they soaked it in a weak acid solution to accelerate the process. A naturally rusted short block would not be uniformly rusted like this one is.
The car owner: Where is my car engine?
Man: first let me finish the video
OHHH YESS ITS SYSTEM OF A DOWN 🤘🏽
YESSSS MY FAVORITE
Yess 🤙🤙
🤘
You what do you own the world how do you own disorder, disorder
Yo soy muy fan de esa canción
As a hip hop head …System of a Down brings back soooo many good memories
Is there really that much of a crossover? I see a lot of this online but never in person. I'm more into alternative hip hop these days but have always liked anything that isn't country. Ironic since I grew up in the rural south but yeah metal, nu-metal, and grunge rock were my favorites as a kid. It gets hard trying to pick music around newer freinds because one minute we'll be vibing together then my next song makes them wish they were deaf lol
What's the name of the song
@@kingmusa5516 Toxicity by System of a Down. I'm loving the new interest in the stuff I grew up with, just turned 20 but yall got me feelin all nostalgic.
@@zenkoz3158 man you gotta listen to chop suey best song on there
@@qbanz00 it used to be my favorite but now I keep coming back to Science, the vocalizations on that track are incredible.
"free boba"
💀💀💀
A Chev/GMC block for sure.
348, ain't it?
Shoulda left it in the drink. lol
@@johne189 348? I know the GM small blocks as 283, 327, 350, 355 (30 overa 350) and 383(Stroker) and the 400. Proportionally I lean in the way of a small block.
@@TomokosEnterprize It's a "W" - for sure.
@@johne189
454 Big Block.
@@TomokosEnterprize
454 Big Block.
That block wasn't in that bad of shape to begin with. That's light surface rust.
@Netscape Navigator Well that depends on how far of a drive it is to the nearest machine shop that has a hot tank. If you have one close and they don't charge a ton of money to hot tank a block, do that. If that's not the case, I would take some rustoleum rust dissolver (it works really well) and spray the shit out of the block on a stand, then pressure wash it off. The only place you really have to focus on are all the bearing surfaces and the cylinders.
Yeah, plus the ladder and scaffold in the back disappear because they switched it out
@@patrickomann3580 I doubt they switched it out just for a youtube short! It might have spent a day or two in the tank and plenty of work around the shop could have occurred in which they might have moved the ladder for.
Doesn't make any difference dude, it was covered in rust. You going to do it by hand? Probably not!
@Quentin Mallard Ok smart guy. How would you have done it differently? Because, I'm not so sure it's how you say it is. So if you can't just "wipe it off" ... then what?
That block has been dipped before and not dried off properly. That's why it's gone red rusty.
Or that block sat in a wet environment
Everyone: cool
Me:dose the balls fit in the combustion chambers
Wait… I used sandpaper. That’s cheating
how many sand paper does it take to clean the whole block, just curious.
@@theforge4591 lost count. Never finished. Passed it on to my son… he passed it on to his son. I got it from my father.
@@brianmason3941😭😭
Ironic song choice 😅 ☣️⚠️
I always wondered what happens to all the crazy toxic fluids ? Do they have to be taken away in special marked barrels before we pay Al Gore to carefully and responsibly despose of them .... by throwing them into the ocean?
The expired chemicals are sent to Ohio for disposal.
@@TokenTombstone dispose to the ocean
@@AkhyarMaulanaPangeranWeb together with car batteries
@@TokenTombstone too soon. 🤣
@@jstdrv exactly. I start to think that japan is right to use hidrogen car.
Half the comments are just from System of a down fans and im here for it 🤘
The engine doesn’t choose the balls the balls choose the engine
That's a fine looking V8 👽
@@notpico751wym
I believe its a 1978 stingray corvette engine im rebuilding one rn
@@genericorange9680cool
@@genericorange9680thats a v8 engine i think
@@genericorange9680i think the corvettes engine is a v8
Some days I wish I could do this to a whole truck that’s been leaking oil for years.
maybe tighten the bolts on the oil pan or buy a new oil filter or event buy a oil pan gasket list goes on but i doubt rust in a problem
@@taylorebenguard6998 Well, I work on many fleet and other random trucks. There is blow by, front and rear crank seals, gear housings, head gaskets, hydraulic pumps and hoses, Oil coolers, autolubers and so on that all can make a mess. No, rust isn’t an issue on some of these but a lot of times its more than just tightening oil pan bolts.
@@tumblevveed3586 you’re right it is usually a lot more than that i’m just saying the easiest things anyone could hopefully do before taking it to someone of course though then again half of a america cant change their own oil which is kinda sad but yeah i mostly just saying the simplest thing that could be tried before really getting into it and tearing the engine down
@@taylorebenguard6998 Alot of people are best off not even attempt to fix anything. You ever watch the channel "Just Rolled In"? that's why I say that.
@liam Anderson If I don't know anything, I either try and do as much research about the subject matter as possible, or use basic principle of physics. Just jumping into something without having any knowledge about it is asking for a bad time.
You can do the same thing with a battery charger, Some kind of electrolyte (Lye, salt, Etc.), some steel rebar, and a container large and strong enough to hold the block and that much water.
No you can't
Welcome back old friend. Let the racing begin!!!
Not only is it clean, it's got more balls!!
Cameraman never dies 💀
que haces chanta jajaja
The Cameraman is now the new Silver Surfer.
Chrysler Engine Factory 🏭
“Okay Yall know the Routine”
Omg so true you are so funny
Nice, how long did you dip it for the result in de video?
Mad respect for men with balls of steel
Um actually they're plastic 🤓
As a rev head who loves SOAD, this is the best thing ever. Grease on the hands with a clean engine block is what we all dream of 😊
I’m never looking at a car/engine the same ever again after playing “my summer car”
Im here for the song. 😌
What IS the song ?
@@valentinmln4114System of a Down - Toxicity
@@valentinmln4114 toxicity
why did they pick toxicity for the song lmao
Dude. It's a chemical bath.
fair point
What normal people see- Engine
What Car community sees- Thats a Huge ass V8
Ah yes, the forbidden ball pit
What is ball pit?
Thank you for reminding me of how much of an absolute banger this song is
Brother what is the name of this song
@@o.mallick5540toxicity by system of a down
Dude has real big balls of real steel to do that
Bros taste in music is fucking giga Chad level
This doesn’t affect the structural integrity of the block ?
@@redbug3696 damn alright, excuse my novice knowledge I’m still learning :)
รถก็ทว่ืททเอิททาพเอาารี😢
Here let me reach in to get my phone that dropped in.
Hand 🖐️-->📱 🏊♂️ =🦴
It’s called a hot tank with caustic soda. Been in use for eons. 😉
Cool story.
he didn't tell a story though.... he just shared what it was for the less informed.🤦♂️
(now that's a cool story😎)
"Caustic soda" ah yes payday 2 ptsd
Now we need aaahh... CAUSTIC SODA... i'm 93% sure
Ok so what are they dipping it for, and what’s the reason for the balls?
1.4M likes just for the song
Wats the name
@@jazzielramirezduque6291system of a down - toxicity amigo eso es cultura general
My boss often plays this song at work and every time I hear it I get goosebumps especially at the end of this song!! Like it never fails lol. What a awesome song
Now how do you guys keep the metal from flash rusting. I ask bc I use a ultra sonic cleaner to clean old tools and things and they flash rust over night. Even if I soak them in oil or wd-40
Get as much water off as you can and dry using a fan. If you use hot air it can promote flash rusting as well. I think you want to be well under 200F
Great question and great advice from responder. Thank you both
After rinsing with water to neutralize the acid spray it with WD-40 while it is still wet, then dry with a blow gun. If painting afterwards wipe down with solvent after drying. Do not blow dry before spraying with WD-40, instant flash rusting will occur.
Original WD40 displaces moisture but does not protect from condensation. Coat metals in actual light machine or mineral oil to displace moisture in the pores of the metal which cause the flash rusting. Allow to sit for 5 minutes and wipe off the excess. WD40 is only good for breaking surface rust and keeping electrical connections lubricated.
Ok...try it before you say no. Boil a pot of water and drop the flash rusted part right in. The rust will turn black and stop. It's an old method of blueing.
Damn near looks brand new!!
😀😀😀😀😀😀
Imagine it comes out fully chrome completely built with a supercharger and blower
With a supercharger and blower ?
Blower = supercharger
@@JustaRandomCarEnthusiast I know I just have a habit of saying that
@@THEGOOBERMEISER cool bro 😎
@@JustaRandomCarEnthusiast yippie
Bro got the incredibles oil balls
are the lifter bores too big now? i assume so because it was all very rusty
They will be bored out to larger piston specifications or sleeved.
@@indridcold8433 Generally a new set of pistons. These older GMC blocks are way to common to sleeve one.
Guys…. He said *lifter* bores
@@TomokosEnterprize That is even better. There is still no replacement for displacement, regardless of what the 4 cylinder, turbo charged, putt-putt engine owners say. I call the tiny, turbo charged, engines, grenades. So far, they have been proven true to their nickname. GM and Ford should consider a recall. Four cylinder engines with turbos have always been problematic. But they keep coming back.
@@indridcold8433 You NAILED IT my friend. I am so old school they could name a library after me. LOL. I drive vehicles with round headlights.
That Mcdonalds has the best ball pit.
Jus wanna honorably mention… as a black man id run this song on repeat
As a black man I revoke your black card.
@@ToreyDeVauxas a mexican i won’t let you remove his black card, and I will give him a taco card too
Listen to whatever you like bro 👌 music and art has no gender or race
Not sure what color has to do with it?
@@user-iu5lc5gz8k as a mexican, i agree, taco card for you too
Credits to the cameraman for diping with the engine
That reminds me of the incredibles 👌🏻
Rxfqpf😂
Okay there's the boba, now all i need is the milk tea
Came out fully-machined, too. 😂
Wow you guys do some amazing work and skills guys ! We need more people like you guys ! Real ART no Cap 💪🏾🇭🇹🇨🇦
if you say so son
Totally forgot how good SOAD is
Now let’s see how they get rid of all that when they have to wash it out every 10 years
what? wash what out? is 10 years a long time to go without maintenance?
Camera man almost burned his face off 😂
Need to dip my life in that, maybe I can start over😂
You need Jesus
Hey do you immediately coat the metal with some sort of rust preventative? I've seen whole cars dipped like this and I was always curious how they prevented it from immediately corroding from the moisture in the air before paint
Steel and iron are usually stripped and degreased with a hot caustic wash. This is allowed to flash rust before it’s dipped into hot phosphoric acid. This converts the rust to iron phosphate which bonds extremely well to the metal.
Great Q & A! Thought I’d add too questioner that if u go too this dudes YT channel, he’s uploaded several many vid’s of whole car bodies gettin’ dipped & washed, among the other various items he’s dipped.. can be somewhat relaxing to watch these steps. After seeing several of his uploads, I’ve come to the conclusion that I’d personally prefer now to have my own classic cars’ body parts dipped, instead of media blasting them!
Thanks!
That block looks gorgeous.
Toxicity by system of a down I haven’t heard that song in ages
W song choice
Now that engines gonna have some balls!
$1,500,000 to restore a $250 engine
My step dad listens to this song a lot
What's the name of it
Umm I don’t know I just know he blue toothed it
@Ayla Cowgill found it was under the video it is
Toxicity: by System of a Down
Thanks For replying
@@Crandon13Toxicity
Thtyurhsc 😮😊❤😮🎉😅😮😢🎉😅😅😢😅😮😅😂😮😮😅😂😅😮😂😂😅😅😮😢😢😮😮😮😮🎉😂😢🎉😢😢😢😂😮😂😮😢😅 @@Crandon13
My Dad had a iron pan filled with diesel ,had propane jets boiling it to clean engine parts
Dr makes drake look like an armature
If she knows how many pistons and what shape they are aligned in, she’s a keeper
Aren't those the same balls to prevent sun from causing bacteria from growing in water treatment plants???!! 🤔🤨
Definitely takes big balls to do a job like that.
You putting your phone in chemical dipping your phone will be clean 😂😂
Legend tune for the vid!! \m/ SOAD
Wonderful
Toxicity - System of a down ❤
soad rocks 🤘
Ball be like 💀:
inb4 its just a massive vat of Evapo-Rust
What’re the spheres in there for?
They slighly reduce evaporation and splash. It's as close as you can get to having a lid without actually blocking access to the fluid.
Шарики для уменьшения площади испарения?
Да... потому что там кислота и испарениями можно отравиться.
Испарение то не избежать. Скорее всего они для предотвращения разбрызгивания.
I have never seen like this satisfying video
Honestly they’d be a touch easier to work with if y’all kept them the ten ish brown color 😂