arduino nano code not uploading problem || arduino avrdude stk500_recv()

#arduino #nano #uploading #avrdude #error #problem
If you are facing a problem while uploading to board arduino nano or any arduino uploading problem then this video with titled "arduino nano uploading problem" is very helpful and 100% working method.
when we make an Arduino project then the arduino uno uploading problem occurs.
Sometimes the arduino nano problem is uploaded to the board because of the USB cable fault.
one reason for the arduino uno problem uploading to the board is the driver but this is rear.if you dont know how to solve arduino port problem then find my old video.
To solve these problems you need to install updated arduino ide software.
arduino avrdude or avrdude: stk500_recv(): programmer is not responding,
avrdude stk500_recv() programmer is not responding to a problem that can fix arduino avrdude error message.
To fix arduino nano (avrdude stk500 error) problem you need to change bootloader option.

[@shivektutorial9048]

Really Dil se thank you Bhai maja aa gya thank you meri 2 ghante ki problem solve ho gayi

[@skynet-robotics]

Welcome

[@SteveRoger-dr3rd]

you are my savior ,tried a number of solutions on google and youtube but yours only work.
thankyou very much

[@skynet-robotics]

👍

[@user-nq5hy7vn9k]

dil se thank you bhai. Kaam kaar gaya aapna tarkib

[@skynet-robotics]

👍

[@mjaber4388]

i dont speak hindi (correct if its not hindi) yet this helped me so quickly. Thank you!

[@fancy1285]

Veľmi mi pomohlo tvoje video. Ďakujem

[@huygamer1132]

Bro can u help me im using the latest ver but when i press tool there is no proccessor for me to press . How should i do ?

[@Satirefields]

same here

[@fauzulkabir9300]

@@Satirefields same here

[@kandatikhinnera]

tq so much bro ur really a greatest person in this world🤩😇😄😁

[@skynet-robotics]

Welcome👍

[@user-gq9xt5kr9p]

love you bhai it worked and saved my 800 rupees

[@skynet-robotics]

👍❤

[@onfire4770]

THANK U MARE BHAI I HAD A PROJET SUBMISSION TM U SAVED ME

[@skynet-robotics]

👍

[@prakhar6852]

Thank u sir meko laga mera Arduino board kharab hogaya thank u again

[@skynet-robotics]

👍❤

[@paarth5993]

Sir really thank you this helped me a lot

[@skynet-robotics]

Welcome

[@annonYk]

​@skynet-robotics but my ide was already using old bootloader

[@erion4019]

thx so much, couldnt understand the language but it still helped a lot

[@skynet-robotics]

👍

[@dirindirin3983]

Well done! It works 🎉 thank you🙏

[@user-yl9cw7zc4k]

tamil pesum aanaithu nall ullangalukum vanakam it working sso thanks

[@skynet-robotics]

Welcome

[@dangavin]

Changing the processor to old worked for me

[@skynet-robotics]

👍

[@_Redtomato_]

thank you so much I panicked a lot when I couldn't upload anything xD

[@skynet-robotics]

Glad I could help

[@alderanbi3930]

THANKS MY BRO I TRIED A LOT OF THINGS AND THIS SOLUTION IS THE RIGTH ONE, GREETINGS

[@skynet-robotics]

Glad to hear from you 👍😊😊

[@do6erman]

Te sei un grande!
Grazie, mi ha svoltato!!!

[@skynet-robotics]

👍❤

[@nguyenlethinh408]

Everyone, can I ask? When I plug in the arduino nano code to the circuit or test board, the code shows a COM error, why? But when I disassemble the arduino nano, the code loads normally? Hope everyone can answer this question, thank you

[@shrey_anshu8452]

Thanku bhai❤❤❤❤ its work

[@skynet-robotics]

👍❤

[@gurujisblessedfamily4010]

Thankyou it helped me alott

[@skynet-robotics]

Glad it helped

[@user-dg7wj7ce5b]

Thank you brother it's working.

[@skynet-robotics]

Welcome

[@prakhar6852]

Very very thank u sir

[@skynet-robotics]

Most welcome

[@tech-06parthibkumardey75]

Thank you so much sir ❤

[@skynet-robotics]

Welcome 👍

[@user-yf1bh6sk5u]

Thank you my man you’re the best it works now 🎉

[@skynet-robotics]

glad it was helpful👍

[@nandantg]

You Earned a Sub for this, thank you very much!

[@skynet-robotics]

Thnx👍

[@taufiqsuryaramadhan]

Thanks a lot

[@skynet-robotics]

👍

[@techwithalan7554]

This method is not working in my ARDUINO

[@user-vq1lg5ex2g]

Merci beaucoup

[@skynet-robotics]

❤😊👍

[@Sksumit0756]

Hy

[@skynet-robotics]

Hi

[@sunflower2461]

Thanks bro, it worked. I was really worried 😊

[@skynet-robotics]

Welcome 👍

[@creator14976]

TQ bhai I love you 😂❤❤❤❤🎉

[@skynet-robotics]

Welcome 😊

[@user-oy1sv2ik1k]

Thank you bro, this method worked, I hope it will be permanent.!❤

[@skynet-robotics]

Yes it will work in future also❤👍

[@ashish210]

Thank you so much bro

[@venkatyalamati3285]

Saved my day... thanks a lot!!!

[@skynet-robotics]

👍

[@babitabarnwal7894]

Thank you bhaiya

[@PWian12956]

Thank u bhai🎉

[@skynet-robotics]

❤🙏

[@thesanketdas]

thanks

[@skynet-robotics]

Welcome

[@hackeletronicsintelugu]

THANK YOU SO MUCH

[@skynet-robotics]

👍

[@vdac3103]

Thank you so much (by the time commenting this video, I've bought another one cuz I thought the previous was bricked lol:)))) 💖💖

[@skynet-robotics]

Welcome 😊

[@aryananiknam4817]

THANK YOU

[@swayansu_]

Not even working on old bootloader

[@techHR.shorts]

Bhai aapki Itni Jyada subscriber aur video ka view Itna kam 😧

[@skynet-robotics]

RUclips shorts video algorithm

[@techHR.shorts]

Oo same 😃

[@midnighthighwaycasettedust9940]

sir ı did many things still its not working. it works with atmega168 but ıt takes too much storage, it doesnt work tith atmega328p or atmega328 old bootloader pls help

[@rajithramakurthi7732]

Thank you boss

[@user-wf9bj7tf5y]

Thankyou so much !!

[@skynet-robotics]

You're welcome!

[@ramanji5854]

You are opp broo thanks you bro 🎉

[@skynet-robotics]

Thanks❤

[@ObsequiousV4]

I had to choose Atmega 168 instead of the Old Bootloader or first option.

[@skynet-robotics]

Old

[@makesomeprojects]

Thanx sir

[@skynet-robotics]

👍

[@SNEHASISHBISWAS-ix7fv]

I use UNO so what i can do now ? Please please tell me

[@qadeer1685]

Good job

[@skynet-robotics]

Thanks

[@devendrapatil661]

मेरेपास भी दो nano board है जीसे मैने अभी अभी ऑनलाईन खरिदा है और उसमे मोबाईल aap से प्रोग्रॅम नही हो रहा है और मेरेपास कॉम्यूटर भी नही है जिससे मै ये ट्रिक इस्तेमाल करके देख सकता अब आपके पास कोई उपाय हो तो बताईये

[@skynet-robotics]

K I will tell u solution

[@devendrapatil661]

@@skynet-robotics thanks
I m waiting

[@GSNSHORTS]

What if the serial number shows null?
Please help

[@skynet-robotics]

Send screenshot to ne

[@mtec2023]

Bro changed cable Arduino nano and the settings then my laptop also but same problem

[@babitabarnwal7894]

Mera 2 week ka problem solve ho gya

[@skynet-robotics]

Welcome

[@legendexperiment7594]

Thanks bhai really work

[@skynet-robotics]

Welcome

[@HORRIEDHARSH]

Sirf do port show kar raha hai par dono mai bhi get board info kuch nahi aa rah to kya karu

[@skynet-robotics]

Cable or driver

[@user-sb1no6li9n]

Sir vo processor ka option nhi aa rha hai

[@skynet-robotics]

Select board arduino nano

[@user-sb1no6li9n]

@@skynet-robotics sir par Mera arduino Uno hai

[@shivamnaidu5876]

thanks bro

[@skynet-robotics]

Welcome

[@avcitech]

thanks!

[@skynet-robotics]

👍

[@ЕвгенМик]

Спасибо!!!

[@aakashjana6225]

dabro pajalovats on his behalf

[@ЕвгенМик]

@@aakashjana6225
:)

[@shoppingoneclick2044]

Thanks a lot, it solved my problem. I was thinking in other way like maybe drivers are different for Uno and nano.

[@skynet-robotics]

👍

[@neerajpatail4417]

What to do if SN is Null

[@skynet-robotics]

It's ok
Arduino ok

[@user-qy8yu4fv4d]

Saare steps follow kar liye ,phir bhi wahi aa raha hai...pls help

[@skynet-robotics]

U need to burn bootloadeer

[@TseleHub]

I can’t find processors

[@skynet-robotics]

Which bord you r using

[@letstalkabout8470]

Thank you ❤

[@skynet-robotics]

Welcome 🥰

[@khelahoberifles832]

vai mera ide pe to programmer show nahi kar raha

[@skynet-robotics]

Nano board select karo

[@PWian12956]

Aaj naya arduino nano lia Bhai mera code uploading pe stuck kyu ho jara h😢

[@skynet-robotics]

Port select karo

[@PWian12956]

@@skynet-robotics acha!
ha hogya bhai thanks 🙏
Maine com7le rakha tha aur arduino com5pe connect tha

[@sonugupta-yk7vp]

Thank You

[@skynet-robotics]

You're welcome

[@sankethdappur7318]

What if serial number not showing

[@skynet-robotics]

Check USB cable or check drivers installed or check on other Computer

[@Embeddeds]

Dear sir सेम प्रोब्लम Arduino Uno me ho raha hai but oo thik nhi ho Raha hai kaise thik hoga sir please my problem solve you dear sir

[@skynet-robotics]

check usb cable working properly
try to upload code 3-4 times
reply if not solved

[@harshiniishankar240]

@@skynet-robotics I am also using arduino uno and tried uploading many times like you said. My problem is not solved. Please give me solution

[@Schwange]

you are legend :)

[@skynet-robotics]

Thnx

[@dynamicmonstergaming132]

tysm

[@BikeMitra]

Bhai mere isme
Me jese hi get boat me jata hu to number nahi de raha he

[@skynet-robotics]

USB cable check karo
Driver install hain kya

[@BikeMitra]

@@skynet-robotics sir kese check karu USB cable mene example me basic code dala to run hogya but jo mene code dala to error bta raha he

[@skynet-robotics]

@@BikeMitra kya error bata raha hain

[@gantalaabhishek8402]

Bhai serial number is getting null what was the reason

[@skynet-robotics]

Null or blank

[@beenadevi9641]

Null

[@aravkhurana2900]

Not Working at all

[@skynet-robotics]

It's showing serial number?

[@PWian12956]

Bhai mera avrdude ser_open can't set come state for com4 aara h isse nhi hatra😢

[@skynet-robotics]

Complet Error message bhejo

[@PWian12956]

@@skynet-robotics hogya bhai maine ch341install nhi kra tha 😅

[@PredatorF-25]

Chup, work nhi kiya!!

[@skynet-robotics]

Good

[@mayankmihirdubey]

Bhai SN. Null likh kar aa rha h

[@skynet-robotics]

Koi baat nhi
Upload karke dekho

[@mayankmihirdubey]

@@skynet-robotics nahi ho rha h but mere me port per Jane par com3 option aata h com4 nahi aata

[@skynet-robotics]

@@mayankmihirdubey com3 select karo

[@abhaykumarsharma8467]

Sir Arduino nano me mobile se code uploade nhi ho raha kya kare

[@skynet-robotics]

Otg cable work kar raha hain kya check karo

[@abhaykumarsharma8467]

@@skynet-robotics ji sir kar raha hai . Arduino nano new hai .

[@zehourketel8241]

I have arduino uno How to solve this problem ?

[@skynet-robotics]

Burn bootloadee

[@miran_zreative]

avrdude: ser_open(): can't set com-state for "\\.\COM10"
Failed uploading: uploading error: exit status 1
how to avoid this issue

[@skynet-robotics]

Check USB port selection

[@miran_zreative]

@@skynet-robotics everything is fine, I am familiar with arduino since 3 years, but in NANO there is always a new issue to handle .😭🤣🤣
edit: Any other proge+rammer to use?, like I am currently using AVRISP mkll

[@miran_zreative]

@@skynet-roboticseven, neither reset button or reset pin working, "MCd" LED constantly on, no other (RX, TX, L)led's state changing from off condition

[@skynet-robotics]

@@miran_zreative probably your Arduino voltage regular damaged