I hope you took away lots from this video. Let me know below! PS. Do you like quiz games? Check my popular FREE Android quiz game here: bit.ly/QuizOfKnowledge
most sane person i've heard on this subject. thanks. i'll try the recovery shop first while crossing my fingers and toes before i either park it or attempt open heart surgery on it myself... all the other 'how to's' are paid adverts on recovery software that assumes that there is any noise/life in the drive to start with... i mean, the lights are on but no one is home :( ...
companies should put a warning sticker on harddrives so every new user knows the risk and start making backup. I had a loss too when i was younger and i do backups since then.
Long time ago, where harddisks were more prone to errors, we used another trick to loosen a stuck head without openong the unit, and that was to carefully slam the side of the disk into a table. It worked fine most of the times, and you didn't have the risks involved with opening it. Another thing I learned, if you had to, was to open the disk in a bathroom, as there is usually less dust there. But the slamming approach worked fine then. This is only my own experience, and I cannot predict how it will work for you.
With a SCSI Drive slamming the thing won't help if the arm stopper under the disk has disolved. There is a plastic lever on the left near the arm (ir carries the heads) and if the rubber stopper has let the arm move too much to the center of the disk that lever has to be reset AFTER the arm has been moved to where it permits the lever to go to where it should be. The rubber has to be big enough in diamter not to let that arm move in too far. It's at least 6mm if not more, looks oike a pinch roller on a cassette desk almost, 3mm high when on the pin it goes on
I pulled the spindle back to parked position, but it doesn’t move as freely. So when I plug it in I get clicking as if the spindle is stuck again and my computer still won’t recognize it. Is this because the spindle might be bent some way?
on my Hard drive needle wasn't stuck when I opened it... when turning on the needle moves back and forth while making clicking noises it continues for 2-3 minutes then needle returns back to it's starting position and nothing happens
I cannot thank you enough about finding that final hidden screw. I've kept scratching the whole sticker trying to find one without any success for hours. The sticker has a sort of metallic base which I kept on scratching thinking it is the drive case while it's just the sticker. Also I've searched all over the internet trying to find the exact location of screw for my model without any success. Thanks again mate. Now to the more important task of resetting the drive head :)
@@Educ8snope I parked it just like you showed but still clicking it’s just stuck or jammed in that slot. Hard disk surface extremely no damages whatsoever. No scratches. It’s just that little thing which is stuck in that slot and doesn’t move to hard drive stays clicking in that slot.
What hard disk drive really means. A hard disk drive (HDD), hard disk, hard drive, or fixed disk[b] is an electro-mechanical data storage device that uses magnetic storage to store and retrieve digital information using one or more rigid rapidly rotating disks (platters) coated with magnetic material. The platters are paired with magnetic heads, usually arranged on a moving actuator arm, which read and write data to the platter surfaces.[2] Data is accessed in a random-access manner, meaning that individual blocks of data can be stored or retrieved in any order and not only sequentially. HDDs are a type of non-volatile storage, retaining stored data even when powered off.[3][4][5]
greeting! when replacing the disc cue head must be all from the same hard disk manufacturer or can it be a cache of any one? but with the assumption that electronics and electronics have changed?
Turn the disc in the middle clock wise. And spin it clock wise several times. See if that works. The problem is the hard drive that can't find the starting point. Its supposed to only click once while turning on. The arrow twitching on it means that it's trying to find the starting point. If it's downloading then it will do that multiple times. It's working.
Sir, our seagate hard drive is damage. It prevent the computer to start. The hard drive is not accessible. I did removed the damage hard drive and computer starts as usual. Is their a way to make the drive accessible?
5:56 whenever you get lucky by reaching to this point, I think it has been fixed successfully. I saw a trick Saying that all ya have to do in this point is to plug it to your smartphone via OTG, then format it from there. I guess Android has some kind of advantage in formatting the disc over Windows
BTW, never plug a repaired or unstable HDD straight into a Windows PC. Windows loves to scribble over drives, even in read-only scenarios, which is dangerous when working with weak heads. Instead, boot into a Linux system (preferably a forensics live CD), and use the ddrescue command (note: _ddrescue_, not _dd_rescue_, the latter is an old, outdated tool) to perform a sector-level backup to a new (reliable) drive. Run any file recovery on that drive, if needed (most of the time the ddrescue copy is usable as-is).
I have a question, I have a transcend hard disk (with the protection cover), few days ago I lost my temper which was fully my fault, because my laptop couldn't detect my hard disk, but the light was on but it wasn't blinking which if it's detectable then it should blink. , so I bang my fist on the hard disk. Now it can no longer be detected, nor does the light blink, I only get that sound. My question is, is the damage going to be extremely bad to the hard disk or can I solve it? As I have sent it to a store but they said they could not fix it but I'm not sure if they tried this method as you mentioned it is very expensive so I don't know if they attempted this step.
Pls someone help. My Samsung 1TB external had the same problem, we fixed it like in the video. I connected to the pc, it was good at first, 100% condition, but at the second connection it started to warm and worked slowly, the condition decreased very fast. The condition now is only 52% in few hours and it says 261 bad sectors:( What can I do?
What could be possible causes of failures when upon powering up the HD, the platter start motion, the head moves on the platter for about 3 times and then spinning comes to dead stop, nothing happens afterwards until I plug off and plug back in the HD and same sequence of motion repeats??
My hp sleekbook said boot device.not found and when i install new.os like windows.7 the hdd partition is not listed so if i follow this video will it fix.my problem2 days ago•
HI SIR , I HAVE HARD DRIVE BUT IT SEEMS NOT SCROLLING PROPERLY AND NOWDAYS NOT WORKING , PLZ HELP ME , IF I APPLIED YOUR MATHOD WILL IT WORKING ?😭 I HAVE MY DATA PLZ REPLY AND SOUND AS WELL AS IN YOUR VIDEO
Sir, what if the head is still on the right place (position), while the problem is it sound like failure " sssssstt...jklek jklek.. sssssstt..jklek .." just like that
Last winter I did a fresh install of Windows 10 and backed everything up from my laptop onto my old 2tb Seagate. Mistake... one day I switched it on to retrieve some music and it hasn't worked since. I have everything on it including family wedding and funeral photos, documents. Pretty much anything important since 2014. I've opened the harddrive. It's spinning and the read/write arm is going back and forth across the platter and bleaping then it stops. Please help what does this mean?
I have an external spinning hard drive which is similar to laptop. the read/write head assembly is bended at the tip. I tried to fix them. But now this harddrive is not getting detected. How should I solve this problem?
I would never recommend that anyone put a metal screwdriver on or near the platters like that. One scratch on the surface of the platter will permanently erase the data contained on that section of the disk. Terrible practice indeed.
You used Easeus too early - it's never a good idea to do file recovery directly from a bad HDD. Image the drive using ddrescue first (from a Linux live CD), then run file recovery tools on the image - though often you won't need file recovery at all, as Linux will usually be able to mount the image without problems.
NetRolller3D If the image does mount correctly, it's best to restore the image to another physical HDD, then run the appropriate file system check utilities (Windows chkdsk for FAT/NTFS/exFAT, Linux fsck for Unix-y file systems) - most of the time, the file system will rebuild correctly once it no longer has bad sectors under it.
my name is pavan kumar, my westren digital ultra 2tb hard drive suddenly stopped working. and i consulted data recovery and they are telling some physical damage inside and small clicking sound coming. so please anyone recover data on disk . im a middle class person and my 7 years photos are inside the drive plzz help me.
MY computer is not working when hard drive is attached. It shows an error while startup meanwhile computer is not working completely.The repair person saidthe hard drive is dead. can we recover the data. I had many important documents in it. I want my data back at any cost. It's very very important. Kindly Do help. is it still possible to get those pictures and other files back from hard drive?
That dust thing is actually a lie. The surface is so smooth that dist comes off very easily. If you notice in the video a small white rectangle in a chute type thing off the left-hand side of the drive, it's actually a dust filter. Which is why the platters spin up first before the heads move is to not only give a cushion of air for the heads but it also removes any particulates off of the platter heads themselves.
@@shaunventulan9372 Yeah, the dust filter is an HDD's first line of defence. The rumour was spread when hard drives had a distance thinner than a grain of smoke between the heads and the platters. But we found ways to make the heads more sensitive so we could increase the space between the head and platter, without compromising data or precisness of the heads. But nowadays it's just an urban legend. I'm *NOT* suggesting that you open your hard drive but it doesn't have to be a clean room of you do have to open the cover.
Slendy Playz thanks, bro. My ST1000ML24 - the one in the video died on me when it was moved a few inches while editing. Header got stuck, unstuck in a clean environment, literally no dust particles. Worked for a few then unmounted when I moved it to my PC(Mac based). Brought it to a center and got it back in a bad condition. No longer lights up and still has the noise. :/
φιλε μου εχω εναν WD 500 ο οποιος μου ειχε πεσει κατω και τωρα γυριζει και κανει click,click και μερικες φορες σταματαει και δεν τον αναγνωριζει το pc,υπαρχει σωτηρια λες?
when i turn my laptop it says Boot Device Not Found so if i follow your video will this work.I also already sian my hardrive quick test and expensive test it say not installed so please help me i have hp pavillion sleekbook 15
Αν είσαι Έλληνας απάντα μου λίγο Λοιπόν οταν ανοίγω το λαπτοπ βγάζει το λόγκο απτο λενοβο και μαζι με αυτο κανει και εναν ήχο σαν ΤΟΥΤ ΤΟΥΤ ΤΟΥΤ για 10 δευτερα και μετά σταματάνε και τα δύο και απλά φαίνεται μια μάυρη οθόνη μήπως μπορείς να βοηθήσεις ;
And if you had done the job in a clean-room and with proper tools to lift the heads off the platter, you would not have had the second problem of not mounting the second time. On top if you damage it in a degree where it must go to clean-room, the solution only becomes more expensive due to your impact. BTW you don't know the value of your internal harddrive until you have made a second backup of your backup :-) So - do nothing on you own until you have a backup of your backup - should be added to your disclaimer.
Recently i purchased a Toshiba HDD and after 6 days it stop working . A clicking sound come from disk . I call to service center but they never receive call . I am very much frustrating from this company . So on behalf of this comment i want to tell you one thing that think twice before buying Toshiba hard disk . My motive is not to contempt Toshiba but i don't want that anyone suffer from same. Thanku
don do this guys u cant.. u need special tool & cleanroom environment. if not ur hdd sure partical contem & next gone.. i duno why this video so many like... u cant do this open air...
I hope you took away lots from this video. Let me know below!
PS. Do you like quiz games? Check my popular FREE Android quiz game here: bit.ly/QuizOfKnowledge
Waving a sharp screwdriver millimeters from the platter as well as scratching the platter while moving the head is peak "educ8".
most sane person i've heard on this subject. thanks. i'll try the recovery shop first while crossing my fingers and toes before i either park it or attempt open heart surgery on it myself... all the other 'how to's' are paid adverts on recovery software that assumes that there is any noise/life in the drive to start with... i mean, the lights are on but no one is home :( ...
You are a good man for posting this video! Excellent instructions, detailed and well spoken. Most excellent job !
Thank you !
this video was since 2014 and it helped me in 2022 thanks so much educ8s Tv .. Am from Africa ( Uganda)
companies should put a warning sticker on harddrives so every new user knows the risk and start making backup. I had a loss too when i was younger and i do backups since then.
Long time ago, where harddisks were more prone to errors, we used another trick to loosen a stuck head without openong the unit, and that was to carefully slam the side of the disk into a table. It worked fine most of the times, and you didn't have the risks involved with opening it.
Another thing I learned, if you had to, was to open the disk in a bathroom, as there is usually less dust there. But the slamming approach worked fine then.
This is only my own experience, and I cannot predict how it will work for you.
Cool! Thanks for sharing!
I can't tell if you're an ass or you're legit..
NeonSoldier 117 I've read other times about hitting the hard drive to unstuck it. He's legit.
I think its more risky to fucking smash it on the table..
jorgenr42 how U done this
With a SCSI Drive slamming the thing won't help if the arm stopper under the disk has disolved. There is a plastic lever on the left near the arm (ir carries the heads) and if the rubber stopper has let the arm move too much to the center of the disk that lever has to be reset AFTER the arm has been moved to where it permits the lever to go to where it should be. The rubber has to be big enough in diamter not to let that arm move in too far. It's at least 6mm if not more, looks oike a pinch roller on a cassette desk almost, 3mm high when on the pin it goes on
Just recovered my drive by doing exactly what you said. The head was only just on the platter so no as far to go to safety. Thanks so much
I pulled the spindle back to parked position, but it doesn’t move as freely. So when I plug it in I get clicking as if the spindle is stuck again and my computer still won’t recognize it. Is this because the spindle might be bent some way?
on my Hard drive needle wasn't stuck when I opened it... when turning on the needle moves back and forth while making clicking noises it continues for 2-3 minutes then needle returns back to it's starting position and nothing happens
η ελληνικη προφορα τελεια,τρελος αδερφε ευχαριστουμε
Thank you for your clear and concise tutorial. Much appreciated sir!
what if you dont turn the plate with screwdriver ? is it not possible to move the head only?
I cannot thank you enough about finding that final hidden screw. I've kept scratching the whole sticker trying to find one without any success for hours. The sticker has a sort of metallic base which I kept on scratching thinking it is the drive case while it's just the sticker. Also I've searched all over the internet trying to find the exact location of screw for my model without any success. Thanks again mate. Now to the more important task of resetting the drive head :)
+Rahul Pasupureddy Good luck!
@@Educ8snope I parked it just like you showed but still clicking it’s just stuck or jammed in that slot. Hard disk surface extremely no damages whatsoever. No scratches. It’s just that little thing which is stuck in that slot and doesn’t move to hard drive stays clicking in that slot.
I took the arm off the platter and it now moves back and forth but it's still getting no read. I have a Seagate 1 TB Backup Plus.
Same, I went from 1 tb to 200 MB. I just wanted to sell it now.
What hard disk drive really means.
A hard disk drive (HDD), hard disk, hard drive, or fixed disk[b] is an electro-mechanical data storage device that uses magnetic storage to store and retrieve digital information using one or more rigid rapidly rotating disks (platters) coated with magnetic material. The platters are paired with magnetic heads, usually arranged on a moving actuator arm, which read and write data to the platter surfaces.[2] Data is accessed in a random-access manner, meaning that individual blocks of data can be stored or retrieved in any order and not only sequentially. HDDs are a type of non-volatile storage, retaining stored data even when powered off.[3][4][5]
greeting! when replacing the disc cue head must be all from the same hard disk manufacturer or can it be a cache of any one? but with the assumption that electronics and electronics have changed?
hi thank you for the video. Just wandering is it okay not to change to a whole new set of heads?
When i hear the indian accent i know the video will be valuable. Thank you mister!
It doesn't sound like an Indian accent
+Pranav Tadpole A little
+H2N plus he obviously isn't Indian look at his skin color
+Pranav Tadpole Allright
I've never seen hin in a video. this is my first
i dont need my data .. i just want the hard drive work again :( i dont want to buy new one every 3 months o.o
lol wtf are u doing with it xD
porn bro, porn.
ssd is the future
try wsd or hsgt
They are said to last for 5 years at least and I have no problem for 1 year
what the hell shit ass hdd are you getting that only last 3 months?:!
i disassembled my hard drive now it wont work just spinning sound and 2 times tick tick and stops completely , can you help me ?
Turn the disc in the middle clock wise. And spin it clock wise several times. See if that works. The problem is the hard drive that can't find the starting point. Its supposed to only click once while turning on. The arrow twitching on it means that it's trying to find the starting point. If it's downloading then it will do that multiple times. It's working.
Put it back together complete ly.
Did you open the case of this HDD with the Torx screwdriver T5 40 MM?
Thanks heaps, it works! You just saved my 1TB data, greatly appreciated mate :D
I am glad it was helpful, almost 10 years after I created the video!
Gracias por el tutorial, ha sido muy ùtil y ahora el disco duro vuelve a funcionar. Saludos!
Sir, our seagate hard drive is damage. It prevent the computer to start. The hard drive is not accessible. I did removed the damage hard drive and computer starts as usual. Is their a way to make the drive accessible?
does it work for an external hard drive?
5:56 whenever you get lucky by reaching to this point, I think it has been fixed successfully. I saw a trick Saying that all ya have to do in this point is to plug it to your smartphone via OTG, then format it from there. I guess Android has some kind of advantage in formatting the disc over Windows
format is a small thing. Recovery is where the price comes.
BTW, never plug a repaired or unstable HDD straight into a Windows PC. Windows loves to scribble over drives, even in read-only scenarios, which is dangerous when working with weak heads.
Instead, boot into a Linux system (preferably a forensics live CD), and use the ddrescue command (note: _ddrescue_, not _dd_rescue_, the latter is an old, outdated tool) to perform a sector-level backup to a new (reliable) drive. Run any file recovery on that drive, if needed (most of the time the ddrescue copy is usable as-is).
I have a question, I have a transcend hard disk (with the protection cover), few days ago I lost my temper which was fully my fault, because my laptop couldn't detect my hard disk, but the light was on but it wasn't blinking which if it's detectable then it should blink. , so I bang my fist on the hard disk. Now it can no longer be detected, nor does the light blink, I only get that sound. My question is, is the damage going to be extremely bad to the hard disk or can I solve it? As I have sent it to a store but they said they could not fix it but I'm not sure if they tried this method as you mentioned it is very expensive so I don't know if they attempted this step.
Pls someone help. My Samsung 1TB external had the same problem, we fixed it like in the video. I connected to the pc, it was good at first, 100% condition, but at the second connection it started to warm and worked slowly, the condition decreased very fast. The condition now is only 52% in few hours and it says 261 bad sectors:( What can I do?
What could be possible causes of failures when upon powering up the HD, the platter start motion, the head moves on the platter for about 3 times and then spinning comes to dead stop, nothing happens afterwards until I plug off and plug back in the HD and same sequence of motion repeats??
worked for me, luckily hdd still readable for data transfer, after that it'll be in garbage, thanks
My hp sleekbook said boot device.not found and when i install new.os like windows.7 the hdd partition is not listed so if i follow this video will it fix.my problem2 days ago•
my failed hard drive makes a click click cluck noise as the platters are been read =(
i dropped my hdd and it still works, however some of the data is corrupt. hw best can i solve this?
Από την πρώτη στιγμή κατάλαβα ότι είσαι Έλληνας
5:17 WRONG HOLE! (I know, That's what SHE said! :)
2:06 it makes a noise like those worms in the Ea worms 2011 Armageddon game😂
how. repair if their is. no. sound.. and disc wont. run
HI SIR , I HAVE HARD DRIVE BUT IT SEEMS NOT SCROLLING PROPERLY AND NOWDAYS NOT WORKING , PLZ HELP ME , IF I APPLIED YOUR MATHOD WILL IT WORKING ?😭 I HAVE MY DATA PLZ REPLY
AND SOUND AS WELL AS IN YOUR VIDEO
Sir, what if the head is still on the right place (position), while the problem is it sound like failure " sssssstt...jklek jklek.. sssssstt..jklek .." just like that
Last winter I did a fresh install of Windows 10 and backed everything up from my laptop onto my old 2tb Seagate. Mistake... one day I switched it on to retrieve some music and it hasn't worked since. I have everything on it including family wedding and funeral photos, documents. Pretty much anything important since 2014.
I've opened the harddrive. It's spinning and the read/write arm is going back and forth across the platter and bleaping then it stops. Please help what does this mean?
Thank you for your tutorial! It fixes my stuck Seagate drive and all my data is still there! Thank you for the clear instructions!
Ashley Z May I have the tutorial please?
please help me
What data must be compatible with among WD hard drives 2.5 BLUE If I want to replaced Head reading or pallets
Thanks..
Πολύ ωραίο το βίντεό σου φίλε μου. Πολύ καλή δουλειά. Συνέχισε έτσι!
Hi there. Thank you for the video - very informative, but I couldn't find the name of the recovery software anywhere! Can you enlighten me please?
I have an external spinning hard drive which is similar to laptop. the read/write head assembly is bended at the tip. I tried to fix them. But now this harddrive is not getting detected. How should I solve this problem?
How would one go about fixing scratch rings on the disk?
Thank you so much, sir!!! Very nice video.
I would never recommend that anyone put a metal screwdriver on or near the platters like that. One scratch on the surface of the platter will permanently erase the data contained on that section of the disk. Terrible practice indeed.
I have hdd for ps2 games but the hdd led light is not working Any solution
if i will open it PCB hardisk what type screw driver recommended ?
What do you think about this problem ? @
ruclips.net/video/0E0M7vuTquE/видео.html
saved my disc! thank you!
You used Easeus too early - it's never a good idea to do file recovery directly from a bad HDD. Image the drive using ddrescue first (from a Linux live CD), then run file recovery tools on the image - though often you won't need file recovery at all, as Linux will usually be able to mount the image without problems.
NetRolller3D If the image does mount correctly, it's best to restore the image to another physical HDD, then run the appropriate file system check utilities (Windows chkdsk for FAT/NTFS/exFAT, Linux fsck for Unix-y file systems) - most of the time, the file system will rebuild correctly once it no longer has bad sectors under it.
NetRolller3D which Linux live CD is good?
Ohh that don't sound nice the disc in my hard drive for my ps4 are stuck too but it doesn't sound like that
my name is pavan kumar, my westren digital ultra 2tb hard drive suddenly stopped working.
and i consulted data recovery and they are telling some physical damage inside and small clicking sound coming.
so please anyone recover data on disk . im a middle class person and my 7 years photos are inside the drive plzz help me.
MY computer is not working when hard drive is attached. It shows an error while startup meanwhile computer is not working completely.The repair person saidthe hard drive is dead. can we recover the data. I had many important documents in it. I want my data back at any cost. It's very very important.
Kindly Do help. is it still possible to get those pictures and other files back from hard drive?
χεχεχεχε "a ταυ six screwdriver!"... Φίλε έσπειρες πάλι. Θα το ανεβάσω μέσα στην εβδομάδα.
Αν δεν μου το έγραφες δεν θα το καταλάβαινα ποτέ! χαχαχα!
Wait, is HDD usable after doing this (assuming you wipe the disk clean of information), what are the odds it gets stuck again?
It's not you just save your files and then you throw it out to the trash and you need to. Buy a new one.
That dust thing is actually a lie. The surface is so smooth that dist comes off very easily. If you notice in the video a small white rectangle in a chute type thing off the left-hand side of the drive, it's actually a dust filter. Which is why the platters spin up first before the heads move is to not only give a cushion of air for the heads but it also removes any particulates off of the platter heads themselves.
Slendy Playz really?
@@shaunventulan9372 Yeah, the dust filter is an HDD's first line of defence. The rumour was spread when hard drives had a distance thinner than a grain of smoke between the heads and the platters. But we found ways to make the heads more sensitive so we could increase the space between the head and platter, without compromising data or precisness of the heads. But nowadays it's just an urban legend. I'm *NOT* suggesting that you open your hard drive but it doesn't have to be a clean room of you do have to open the cover.
Slendy Playz thanks, bro. My ST1000ML24 - the one in the video died on me when it was moved a few inches while editing. Header got stuck, unstuck in a clean environment, literally no dust particles. Worked for a few then unmounted when I moved it to my PC(Mac based). Brought it to a center and got it back in a bad condition. No longer lights up and still has the noise. :/
@@shaunventulan9372 I think might find that it's a bad bootloader. where did the head get stuck close to the spindle, middle or outside
Slendy Playz it was stuck in the middle.
SpinRite is another app I used to use (to recover or attempt to recover) bad sectors.
Great tutorial. I will let you know if it works.
disk 1 unallocated space total zize 0.0mb free space 1.0
Il était juste bloqué... Ce n'est pas une réparation de panne!!! De plus, cette panne est très très rare!!!
You repaired your hard drive before using data recovery. i repair necessary before attempting to retrieve data from the hard drive.
ΓΕΙΑ ΣΟΥ ΜΕΓΑΛΕ ΤΕΧΝΙΚΕ. ΕΙΣΑΙ ΘΕΟΣ (χωρίς πλάκα).
Επιτέλους ελληνικό βίντεο 👌
MUITO BOM GOSTEI NAO TESTEI A INDA MAS ACHEI PRECISO NAS DICAS
φιλε μου εχω εναν WD 500 ο οποιος μου ειχε πεσει κατω και τωρα γυριζει και κανει click,click και μερικες φορες σταματαει και δεν τον αναγνωριζει το pc,υπαρχει σωτηρια λες?
Compliments. Clear and concise!
i m having problem with this samsung HD 320GB 2.5 SATA . the hardisk drive shows up but i cannot access what should i do??
when i turn my laptop it says Boot Device Not Found so if i follow your video will this work.I also already sian my hardrive quick test and expensive test it say not installed so please help me i have hp pavillion sleekbook 15
Hi ..how can i recover photos from a hard drive which is accidentally fallen down & have scratch...
my hard drive give sound like "tik tik"
and it doesn't work
it is very important data for me
tell me what I do
it transformed itself into a clock. anyway, what did you do?
3:40 warranty voids anyway, so use a can opener :)
Ευχαριστω!
Χαιρεται .... εμενα δεν μου εμφανιζει το εικονιδιο απο τον σκληρο δισκο?? ενω στις συσκευες το βλεπω !!!
σε μενα δεν εχει τη βιδα στο κεντρο του δισκου ....υπαρχει αλλος τροπος για να γυρισω τον μικρο αξονα στη θεση του?
Πατρίδα! Ωραίος!
Great video, really clear information
The microphone when you were picking up the sound lol
the external is not to fix again
Thank you tremendously :)
Can you please fix mines
Thank you sooooo much. Very well explained
Αν είσαι Έλληνας απάντα μου λίγο
Λοιπόν οταν ανοίγω το λαπτοπ βγάζει το λόγκο απτο λενοβο και μαζι με αυτο κανει και εναν ήχο σαν ΤΟΥΤ ΤΟΥΤ ΤΟΥΤ για 10 δευτερα και μετά σταματάνε και τα δύο και απλά φαίνεται μια μάυρη οθόνη μήπως μπορείς να βοηθήσεις ;
thanks from Greece
Δούλεψε και σε σένα;
And if you had done the job in a clean-room and with proper tools to lift the heads off the platter, you would not have had the second problem of not mounting the second time.
On top if you damage it in a degree where it must go to clean-room, the solution only becomes more expensive due to your impact.
BTW you don't know the value of your internal harddrive until you have made a second backup of your backup :-)
So - do nothing on you own until you have a backup of your backup - should be added to your disclaimer.
thank you. i now try and will update. nothing to lose atm :D good to give a try :D
I got same disk doing same thing :D :D
That's my line! "All we have to do is..."
Very useful. Thanks.
what if its not stuck?
VERY GOOD, WITH LEARNED THIS VIDEO
Life saving video🌹
I0A,1,a,0,0,0 need help
Recently i purchased a Toshiba HDD and after 6 days it stop working . A clicking sound come from disk . I call to service center but they never receive call . I am very much frustrating from this company . So on behalf of this comment i want to tell you one thing that think twice before buying Toshiba hard disk . My motive is not to contempt Toshiba but i don't want that anyone suffer from same.
Thanku
don do this guys u cant.. u need special tool & cleanroom environment. if not ur hdd sure partical contem & next gone.. i duno why this video so many like... u cant do this open air...
I did it and I recovered all my data. Of course the HDD after this procedure is useless.
I had same issue, and followed these instructions and everything has been fine now for 3 years. Obviously there was no dust around in my garage :)
vested interest?
Can I know that process ?
Why hard drive do this? I had 2 times this?