Low Water Pressure on the Hot Side Only? It Could Be Your Shower Cartridge
HTML-код
- Опубликовано: 14 июн 2024
- No Hot Water or Low Water Pressure in the Shower? Complete fix and options explained.
📢 Subscribe to Top Homeowner Here: geni.us/tophomeowner
👇 CLICK SHOW MORE 👇
If you have no hot water or low water pressure in your shower, there are some different things you can try to fix the problem. The usual issue is a bad cartridge in the shower valve. In this video, I explain some different things you can try before replacing your shower cartridge, as well as full instructions on how to replace a bad Moen 1222 cartridge.
This is NOT a sponsored video. Some product links are affiliate links, including Amazon Affiliate links, which means if you buy something, we may receive a small commission at no additional cost to you.
📒 Video Notes 📒
From fixing your plumbing to installing smart home tech, we've got you covered with awesome content that's informative and entertaining. Our mission is to help you make your home the best it can be!
==Product Link(s)==
Moen 1222 Cartridge: geni.us/UoWdHi
Waterproof Grease: geni.us/h2hA
Cleaning Brush: geni.us/FQuj
==Tools Used or Shown In This Project==
Cartridge Removal Tool: geni.us/Wtqv
Adjustable Wrench: geni.us/NUKavZ
Pliers: geni.us/2ZWhvjW
Ratcheting Screwdriver: geni.us/Q5T4Lo8
Connect with Top Homeowner on Social Media:
✍ Visit our blog @ www.tophomeowner.com
📷 Follow us on Instagram: / tophomeowner
👍 Join us of Facebook: / tophomeowner
🐦 Tweet us on Twitter: / tophomeowner
❓ QUESTION - Have a question about Home Maintenance, Home Repair, Home Related Products, Organization, or Anything Else? Post in the comments section of this video!
📢 Subscribe to Top Homeowner Here: geni.us/tophomeowner
--------Cameras and Gear Used To Make This Video ------
Curious about all the Tools 🛠 and Gear 🎬 we use on Top Homeowner?
Full list here: kit.co/tophomeowner
Like the Graphics and Music? ♪♫♪
Download Unlimited Creatives for All Your Projects:
Envato Elements: geni.us/AZYHh6
#plumbing #showerproblems #nohotwater #tophomeowner #homerepair
⏰ Chapter Timecodes ⏰
0:00 The Problem
0:10 Possible Fixes
1:01 Cartridge Removal
4:20 Cartridge Installation
Disclaimer:
Top Homeowner produces videos for informational, educational, & entertainment purposes only. Information here is not to be viewed as advice but as an opinion. Viewers should be aware that if they choose to work on their homes, they do so at their own risk. Top Homeowner is not responsible for any damages that may occur to the property of a viewer. Some of the projects, materials, and techniques may not be suitable for all ages or skill levels. It is up to the viewer to decide whether to consult with a professional before working on their home. We make no claims to the safety of the projects, techniques, or resources featured in this video, and we will not be held responsible for the actions viewers may choose to take with the information provided. It is recommended that viewers use common sense and take all necessary safety measures. Codes, regulations, standards, and rules are constantly changing around the world, so it is the viewer's responsibility to ascertain their local requirements before starting any type of work. 
Хобби
I’m soooo glad I found this video, I could cry ugh
Probably the BEST DIY video regarding this concern. So straight forward and most of all...IT WORKED!
Awesome! Glad it fixed your problem!
Yep, not too long, not too short, covered all topics
Great job describing the parts and how to...love to see any hiccups, because in the real world we always have issues, like the part not coming off easily. GREAT VIDEO!
Thanks for watching... and for the feedback!
Fixed the problem. Watched the video a few times and everything was SPOT ON!!! Two thumbs up!!! Thank you
Great to hear!
Excellent video! Thanks
Just finished replacing cartridge, what a wonderful success! Thanks
Fantastic!
Thanks for this video 👍 Really appreciate your work. thanks 🙏
The best video on the topic! Followed the instructions and have hot water pressure again!
The strange thing is that my house is 8 years old and we have never used this guest shower, so not sure how the cartridge had gone bad?! Maybe from sitting there without water flowing through it?! Thanks again!
Thanks! Your video helped me change my sister's cartridge. Thank you so much
Thank you! Glad this was helpful!
Thank you for this. Definitely fixed my problem. I followed you step by step and now my hot water pressure is back.
Awesome, glad to hear it!
SO helpful. Thank you!!
So educational! Thank you!
Glad you enjoyed it!
Thanks for your time, I think this will help.
Sure thing!
Thanks this helped alot
Thanks for sharing the video. Question. Could the low hot water pressure from the shower also affect the hot water pressure from the vanity sink faucet in the same bathroom?
Thanks
Nice video sir. Could this issue also occur in the bathroom faucet? Trickle of the hot water side comes out but nothing when we swing the lever to the cold water side. All other faucets/showers dispense water normally in house.
Subscribed!
We have a moen brand faucet are the cartridges the same for all brands?
Great video
Thanks
David Anderson Newell iowa
Can I use the replacement valve you added here on any faucet? I have a Pegasus.
New subcriber,
Thank you for your help!
That low flow was drive me crazy
Awesome, glad it helped you!
Thanks for the video. I followed your instructions with my Hansgrohe system and replaced it with a new cartridge, but 2-months later the pressure has gradually worsened again. Any thoughts?
Hello
I watched the video , it very helpful. Thanks much,
I tried myself, but I got different kind of cartridge. I am stuck. Could you help me if send the picture of my current faucet cartridge, pls
Nice!!!
Great video. How would I do this with a three knob shower set up?? Thanks in advance.
With a three knob, there will be a separate valve on the hot side that's probably bad. Check out this video for more details: ruclips.net/video/zDY2MCQZRic/видео.html
Thanks this was my exact problem rust clog at water heater
Glad you found the issue!
Change the cartridge same issue I did put it in upside down so right is on the hot side now. What are your thoughts?
I only have low pressure on the hot water side. Having issues after replacing my shower head. So the hose and shower nozel part is new. I replaced the mixer last year so its brand new.
Trying to think what i can do. I might try the old shower head back on after work.
Quick question what is the pressure from the hot side is not only in the showers I have problems with foists as well.
So i have same shower setup and i had no pressure. But it was because of main valve wasn't fully opened. After opening it more, switching to shower water flow started making noise. Will be performing valve replacement anyways. Watched this video 5 times now.
had low water pressure in both my showers just started happening out of the clear blue...I called my local water co. they asked if I have a water softener which I do but have never used. They advised me to turn nozzle onto Bypass which I did and water pressure if BACK to normal
My issue is - mine is a tub/shower. The shower head is fine but the tub faucet when fully open on hot drops in water pressure. Brand new cartridge and shower a tub. Any ideas?
Hi, thanks for the great video. I get perfect cold but when turning to the hot it gets very weak. The entire system is brand new and has never been used before. I have the same set up in the other bath w/ no issues. I have a tankless heater (Navien NPE - 240S). I don't see or know about a manifold. Before buying the tool to remove the cartridge, do you have any suggestions? Much appreciated.
Since it's new, you might just be able to use pliers to pull the cartridge out to inspect it without buying the tool. Also, it could be that the hot water line has some type of blockage inside the line... Like debris from wood or even solder if it's copper pipes. Either way, both hot and cold are mixed in the valve so if something is blocked, or if it's the cartridge, I'd look there first. If it's not the valve/cartridge, then the problem has to be between that shower and the hot water tank.
hey, i have the same tankless heater, same problem. Did you get it figured out?
Replace pressure balancer cartridge.
Great job.
Right after a water main break and repair on my block, my bathroom and kitchen sink hot water stopped coming out, only cold water comes out. But my shower and other bathroom sink are fine.
Just my kitchen and main bathroom hot water stopped working at the same time and same day they worked on the main break on my block.
So i doubt its the catridge, both faucets are only 6 years old.
So is the problem with my hot water heater? But the hot water works for my shower and 2nd bathroom sink??
Its possible that all new shower valve has to be adjusted?
I have new one . I just put in today but the water not strong enough. Can you help me please tell me what I need to do?? Please
How do you check brand of hardware and type of cartridge needed? Thanks so much.
I have another video that can help: ruclips.net/video/J-0Z_jabSG0/видео.html
Great video man. Thanks. I think this is exactly what my problem is with my shower. Quick side note. Why would any one want tile with a chipped cutedge like that? Was it on sale? Lol it's so ugly. 😂
Glad it helped! We think they were going for a Tuscan look when they built the house. It's not too bad but we wouldn't pick it for sure!
Would calcium deposits limit one or both hot and cold pressures? My shower upstairs doesn’t have as much cold water pressure but has plenty of hot
It could easily be a cartridge issue but I’m gonna clean the deposits either way. I’ll also check the valves you mentioned
It's possible it's calcium, but that usually affects both hot and cold, not one or the other.
Which point in the line to reduce water flow (pressure?) in the shower stream at least, to save money on water bill?
They make shower heads that are designed to reduce the flow and save on water
Ok so my husband replaced the cartdridge because we couuldnt het the water from the tub to stop dripping so he replaced it late night next moeming i went to take a shower turned cold water on from sjower then hot and not hot water turnung jt on only made the cold water slow down what did he do wrong
Great video. I just installed a new Moen 2510 valve with a new 1222 cartridge. I have extremely low water pressure. If I take the cartridge out and turn the house water back on, the water pressure is normal blowing across the shower. I have contacted Moen and their answer was a new 1222 cartridge. I have now swapped the cartridge 3 times with three different cartridges and no difference. I reversed the cartridge so that H&C are on the bottom. Same issue but now hot water comes out instead of cold. I did recently install a new hot water heater (electric) and pressure tank before replacing the shower valve. Could the pressure tank on the hot water heater be the issue???? All other plumbing in the house works fine.
Both hot and cold are low pressure? Since it's fine everywhere else and you've swapped out the cartridge (a lot), I suppose it could be the valve itself but I'm not sure what the issue would be. Sorry I can't be more help.
Thank you and sorry for the delayed reply. Ill advise if and when I figure it out.
I have the same issue! fuck moen!!!!
@@David-ik6yu were you able to figure out what the issue was? I'm having the same problem
Me too just the hot water. I've changed the cartridge and the seat several times...when I remove the seat and the cart water blasts out of the hole
For a rental unit built in 1928, where the hot water supply pipe is rusted and often clogged, which reduces the hot water flow rate (pressure), would you recommend (1) changing the pressure-balance mixing valve, (2) only the cartridge, and/or (3) "cold water backflushing" the hotline? I get fluctuating 0.05GPM to 1.5GPM hot water from my shower nipple and tub spout compared to 5.0GPM to 5.5GPM on the cold side. It can take 30 to 100 minutes to fill up a 50 gallon bathtub with hot water and I get thermal too-hot and too-cold shocks from the showerhead. Yikes! Old rusted pipes!
Easiest would be to inspect the cartridge first and see if it has a problem, then I'd inspect inside the valve to see if theres some debris that can easily be removed. Good luck!
With a rental property, to remove liability, have the pipe replaced,if you take out the pressure balancer someone could get scalded.
That’s a nice shower
What would be your course of action if this was happening to a shower that the hot water worked in the morning and now it’s not in the afternoon? Would you suspect a cartridge?
Home is 20 years old, only this particular shower is loosing pressure on hot our other one is not. We do have polybutylene pipes.
Cartridge is pressure balancer, if you have a pressure drop it a no brainer.
Most likely it's the cartridge.
I would suspect the cartridge, it floats between hot and cold,in the morning you shower relieving the hot expansion, during the day water heats up expands and gets stuck ,sometimes I have seen little or no pressure from both sides.
We had the same problem, replaced the cartridge and still have low hot water pressure in the shower. However, if the vanity sink water is running at the same time, there is good pressure. Any idea on what can cause this?
it's due to the air bubbles in the vertical pipe going to shower head and the sink is usually lower than shower head therefore it (the sink) gets more pressure .what i would do is either run the sink tap on full (Hot line) for a few seconds, you will hear air bubbles coming out once there is no bubbles you can turn it off or you can run both sink and shower ( on full hot lines as well) at the same time for a few second ( it may take longer depending on how far your hot water tank is to both) then turn off the sink tap. i hope that works let us know if it works for anyone. it works for me:)
@@i-tit5474 thank you soooooo much for this, I was just about to order a cartridge and saw your comment...after running both the hot water on the sink and shower the hot water pressure in the shower again is good again, you made my day! :)))))
Hello! So we replaced this and we are still having the same issue. Any suggestions? House was built in ‘88
Did you try replacing the shower head? There is also a water flow restrictor inside it that you can break off and pull out for more pressure.
I have changed the complete shower unit (and therefore also the thermostat cartridge) and yet this exact problem persists (reduced pressure only on hot). Anyone got any thoughts about what else the problem could be?
any update? could be your water heater, do you have any issues with that?
If you are on a well with hard water or iron pipes hot water tank inlet/outlet could be blocking
i’m having this problem too did you ever figure out a solution?
@@MakaylaTW yes, for me it was the water tank in the attic was too small. Had to get someone in to work out the problem.
Can you adjust the cartridge in any way or do you recommend buying a new one
New is the way to go
Did you have to shut off the water main?
Yes, I did. Once the cartridge is out there's nothing stopping the water
What if it’s the sink and shower only in one bathroom? Hot water in kitchen and second bathroom ok. Hot water in the sink and shower in the first bathroom very low. The only thing I can think is a bad solder job protruding into the copper pipe choking the flow.
Try This: it's due to the air bubbles in the vertical pipe going to shower head and the sink is usually lower than shower head therefore it (the sink) gets more pressure .what i would do is either run the sink tap on full (Hot line) for a few seconds, you will hear air bubbles coming out once there is no bubbles you can turn it off or you can run both sink and shower ( on full hot lines as well) at the same time for a few second ( it may take longer depending on how far your hot water tank is to both) then turn off the sink tap. i hope that works let us know if it works for anyone. it works for me:)
Is the hot pressure supposed to be exactly as strong as cold or is it slightly less strong due to it not mixing with the cold?
It should be the same pressure the whole way
At least a half dozen things that could make this task NOT go as easily as the video shows. Regardless, still helpful...just be aware that it may not be this easy (like most DIY projects).
Agreed - with my luck, this is never going to be the fix! lol
Can u just turn off water through body valve?
The cartridge is what blocks the water so once it's removed, you'll be soaked!
I wouldn’t check the shower head if there’s pressure with the cold water
He said that
Behind the wall if i turn cold off from the valve and keep hot on i get no water on hot at all
Same here. Any suggestions?
I did all this and it did nothing. Also, my water takes forever to get hot. This ONLY happens at one shower (and one place) in the entire house.
Try this: it's due to the air bubbles in the vertical pipe going to shower head and the sink is usually lower than shower head therefore it (the sink) gets more pressure .what i would do is either run the sink tap on full (Hot line) for a few seconds, you will hear air bubbles coming out once there is no bubbles you can turn it off or you can run both sink and shower ( on full hot lines as well) at the same time for a few second ( it may take longer depending on how far your hot water tank is to both) then turn off the sink tap. i hope that works let us know if it works for anyone. it works for me:)
What if you replace the cartridge and still does not correct the hot water flow? Ie still low pressure
Most likely there is something blocking the flow. Either something in the pipe (like solder/debris) or possibly a supply line valve is not open all the way
1st time someone tries this and half the cartridge gets stuck or breaks inside the valve. They will be calling a plumbing company. 2nd thing that occurs is the cheap aluminum puller breaks🤣🤣
My hot water is suddenly low pressure at every faucet.
The issue where your pipe connects to your water heater, usually a clr type issue.
The issue is likely a blockage. Happens often with galvanized pipe not as common with copper.
That Pressure don't look too full :o
It's not just the showerhead it's also the shower faucet.
Looks like the water pressure in general for that shower is very poor at least it would be for me
What if this is happening thru out the whole house
I'd investigate your hot water tank first. Could be blocked there due to calcium buildup or another problem.
@@TopHomeowner thats what im thinking but I'm waiting till spring till I mess with water its currently below freezing temps here in minnesnowda
@@TopHomeowner we had a 40⁰ day last week i turned the main off and turned on all the faucets and turned the main back on to see if I could push whatever it was but I don't think it would have made a difference in the situation since we have full pressure on the cold water and dribble and air with hot water
@@onemansvideos2134 any update? We have this issue as well, when I turn the handle to fully hot, the pressure reduces, which happens to all showers in the house
@@aaronbaraiya3692 we had build up it our pipes so we disconnected the main hot from the hot water heater and used an air compressor and blew compressed air thru the hot water side of the faucets and blew chunks of build up out the hot water line at the hot water heater...it definitely helped alot
@ 1:46 removed two parts(temp. setter) @ 7:21 replaced with one part !!! just saying
and @ 7:28 handle not even close to being on properly, really, why not show it now right
Comment 69