hmm under 300 $ cost my cocpit all same similar than this only i have displays 22 inch ,4 pcs buy 30$ used display. not expensive if diy work all, idiots and rich peoples buy flight plastic parts youke and all and newer not have same realistic than real cocpit dimension build all itself.
A big HELLO from CYQT, Beautiful Thunder Bay Ontario Canada. 🇨🇦 Love your home simulator. WOW, very IMPRESSIVE. GREAT video, I will definitely watch your other videos. THANK YOU for sharing your knowledge and your love for Aviation. Much RESPECT Sir 🙏 for what you have created.
Thank you for your video. I would like to buy anything you will produce in the future. Very innovative. Good thinking and great planning. I am a former CFII mostly all Cessna 172.
Good evening, one day you can make a video explaining how to use the plane maker of x plane 11 to be able to configure the views of the three monitors as you have configured it since I see that it is necessary to learn and no matter how much I look I can not find a tutorial that I explained exactly how to achieve this type of views since the wings are seen on the screens and the nose in the main one, I also understood that the configurations vary according to the size of the monitor, the resolution, etc. (I hope one day I can make a tutorial explaining the step by step of how I achieve that configuration through plane maker thank you very much in advance)
This is the most realistic simulator build I ever seen so far. Nice work! The next improvement could be adding the GA headset jacks, interior light knobs and maybe make the radio rack interchangeable to GNS530/430? I also use the Virtualfly Composs on my simulator but I believe you can make a better one from scratch. Also if you print the trim wheels from ABS then you can steam these in acetone for couple of minutes to polish them.
Thanks. What you mentioned is exactly what I'm working on now. I use PLA for 3D printing but you are right ABS with accetone finish can make the surface much smoother...
It would be good to see your Brunner Setup details from within CLS2Sim software in both X-Plane and MSFS2020. I have the CLS-MKII Yoke and Rudder peddles.
Beautiful set up! You exactly explained the issues with spring yokes... ppl SEP like you, I am interesting in the Brunner. Do you feel the command mushy at low speed when flaring or stalling? Would like to see a video with those manoeuvres
i have and my flight school have similar realistic cocpit building can training many hour fly. this have FAA certificated, and better certificated in school fly have x plane. totally better but need lot lot more power to computer.
I haven't heard of that Brunner yoke yet, seems quite cool! Amazing job, The pity party of having such a highly customised cockpit is that you only can properly for the specific plane you built it for, for all others it is suboptimal. By the way, which simulator software is that?
Hi beautiful simulator , I am building a sim with 3 55 inchntv ,could you share the measurement from the floor of the cockpit to the bottom of the left and right tv Trying to get a idea
Very very impressive world. I tried to find more technical details in your other videos but unfortunately i'm not speak Japanese and automatic RUclips English Subtitle option was a ...disaster. I believe that as a professional you could share your knowledge with other people who want to make their own FS coskpit. For example: cockpit dimensions...
How great a query will be that you can share your screen configurations with us, as you did to make the wings look like this on each screen, I can't get them to look like this, it would be very nice without sharing your settings
Setting the view mode to "3D cockpit" lateral offset of ±90deg for the side monitor will let you see the wings. My setting wouldn't work for your cockpit because it depends on geometric arrangement of the monitors and eye position.
@@flightsimulatorcenterupwin2720 And how can I do to configure my 55-inch screens are all three so that it looks like yours? My email is capitanrodrigoandrade@gmail.com
Very Nice but you're i VFR conditions and I never noticed you look for trafic even ounce after rotation and start of clime to 1000'. Gota get the head on a Swivel man. Great Sym man.
In japan, in what prefecture do you stay? I visit Japan more than 5 times in the last 2 years I hope I can see it. But now japan borders are still closed :(
wery similar i has building, only my 3 display have only 22 inch. and i need arduino leonardo board all analog input change, mobiflight software and arduino mega i have all buttons,switch,encoders and 2 radio panels 7-segment display. i need makde trim wheel but my printer not working. youke i has made cessna 182 yoke dimensions, at wood. and plastic gears to potentiometer.msfx and fsuip have all together. future need adding 2 computer together seconf pc do air traffic,weather,gauges, etc secondary work and first do flight sim 3 display, and main swoftware.then can adding 3 more display to many different addons.1 display have gauge panel, and 3 have window wiev outside, future need 2 display more.
Nice job captain, cover your monitor black frames, using my concept, by visiting my RUclips page. It will work better on your settings since you have your monitors set 90 degrees. 😊👍
Phenomenal Job !!!! I just can't find the words to describe how impressed I am with what you have created.
Very cool simulator!!! I love seeing amazing ideas like this!
Control Loading is a very big improvement in realism. Great project. Thank-you for posting!
This looks amazing. It also looks very expensive.
hmm under 300 $ cost my cocpit all same similar than this only i have displays 22 inch ,4 pcs buy 30$ used display.
not expensive if diy work all, idiots and rich peoples buy flight plastic parts youke and all and newer not have same realistic than real cocpit dimension build all itself.
Sure would be interesting to know what the fellow responding to you was trying to say.
Impressive build. The realism is exceptional. Nice work.
Great, I've never seen anyone in Japan who can make their own so far.
A big HELLO from CYQT, Beautiful Thunder Bay Ontario Canada. 🇨🇦
Love your home simulator. WOW, very IMPRESSIVE.
GREAT video, I will definitely watch your other videos. THANK YOU for sharing your knowledge and your love for Aviation.
Much RESPECT Sir 🙏 for what you have created.
I can only wish for a Brunner yoke. They are beautifully made but I can not afford one. Great video Kohei, thanks.
That's a very nice simulator, looks very realistic, which is useful for a simulator
This is an incredible build good job
Thank you for sharing your wonderful sim.
Thank you for your video. I would like to buy anything you will produce in the future. Very innovative. Good thinking and great planning. I am a former CFII mostly all Cessna 172.
Good evening, one day you can make a video explaining how to use the plane maker of x plane 11 to be able to configure the views of the three monitors as you have configured it since I see that it is necessary to learn and no matter how much I look I can not find a tutorial that I explained exactly how to achieve this type of views since the wings are seen on the screens and the nose in the main one, I also understood that the configurations vary according to the size of the monitor, the resolution, etc. (I hope one day I can make a tutorial explaining the step by step of how I achieve that configuration through plane maker thank you very much in advance)
Your simulator looks great.
That is an amazing flight simulator.
日本でコックピット作ってる人がいて嬉しい
This is remarkable. Nicely done
Wonderful, thanks for sharing.
This is the most realistic simulator build I ever seen so far. Nice work! The next improvement could be adding the GA headset jacks, interior light knobs and maybe make the radio rack interchangeable to GNS530/430? I also use the Virtualfly Composs on my simulator but I believe you can make a better one from scratch. Also if you print the trim wheels from ABS then you can steam these in acetone for couple of minutes to polish them.
Thanks. What you mentioned is exactly what I'm working on now. I use PLA for 3D printing but you are right ABS with accetone finish can make the surface much smoother...
Great craftsmanship!
It would be good to see your Brunner Setup details from within CLS2Sim software in both X-Plane and MSFS2020. I have the CLS-MKII Yoke and Rudder peddles.
Great build!!!!..DIY is the best
Great work
Do you sell plans, parts, ingredient list, or have a how to vid anywhere? I don't think I can go on living without one of these...
when youre an engineer... lol thats awesome
Amazing. Well done!
Awesome job
Beautiful set up! You exactly explained the issues with spring yokes... ppl SEP like you, I am interesting in the Brunner. Do you feel the command mushy at low speed when flaring or stalling? Would like to see a video with those manoeuvres
Good job from Algeria !
"Realism" is the word being said at exactly the same time as you switch over to wearing a giraffe mask... for realism.
i have and my flight school have similar realistic cocpit building can training many hour fly. this have FAA certificated, and better certificated in school fly have x plane. totally better but need lot lot more power to computer.
@@mattivirta Cool story, bro.
Amazing setup!
AMAZING WORK!
Brilliant - well done.
I haven't heard of that Brunner yoke yet, seems quite cool! Amazing job, The pity party of having such a highly customised cockpit is that you only can properly for the specific plane you built it for, for all others it is suboptimal.
By the way, which simulator software is that?
wow this is an awesome build!
Hi beautiful simulator , I am building a sim with 3 55 inchntv ,could you share the measurement from the floor of the cockpit to the bottom of the left and right tv Trying to get a idea
awsome work.
Nicely done!
Excellent really impressive 👍
Amazing job sir!
Very very impressive world. I tried to find more technical details in your other videos but unfortunately i'm not speak Japanese and automatic RUclips English Subtitle option was a ...disaster. I believe that as a professional you could share your knowledge with other people who want to make their own FS coskpit. For example: cockpit dimensions...
Very nice work.
Great work! I really like the trim mechanism. Have you shared the design anywhere?
How great a query will be that you can share your screen configurations with us, as you did to make the wings look like this on each screen, I can't get them to look like this, it would be very nice without sharing your settings
Setting the view mode to "3D cockpit" lateral offset of ±90deg for the side monitor will let you see the wings. My setting wouldn't work for your cockpit because it depends on geometric arrangement of the monitors and eye position.
@@flightsimulatorcenterupwin2720 And how can I do to configure my 55-inch screens are all three so that it looks like yours? My email is capitanrodrigoandrade@gmail.com
This is awesome!
Very Nice but you're i VFR conditions and I never noticed you look for trafic even ounce after rotation and start of clime to 1000'. Gota get the head on a Swivel man. Great Sym man.
nice work of yours, what can i do to have or download the files, to have them printed on my 3d printer or CNC?
Fantastic job,how much to build me one
FANTASTIC!
Can you please share any CLSIM profiles you made ? I never been in a plane, not sure if I’m getting the settings right. Thank you!!!
Awesome great job 👏🏼
Neat!
Excellent!!!!!!!!!!!
Can you make more videos in English? Well done friend.
amazing work, can you show us how to do it?
In japan, in what prefecture do you stay? I visit Japan more than 5 times in the last 2 years
I hope I can see it.
But now japan borders are still closed :(
Awesome!
I have the same yoke and I can agree that it’s totally brilliant. Love your setup. Do you have any plans for the trim wheel ?
What is problem with right monitor video. Not smooth like left monitor??
What size monitor are you using behind the panel for instruments
wery similar i has building, only my 3 display have only 22 inch. and i need arduino leonardo board all analog input change, mobiflight software and arduino mega i have all buttons,switch,encoders and 2 radio panels 7-segment display. i need makde trim wheel but my printer not working. youke i has made cessna 182 yoke dimensions, at wood. and plastic gears to potentiometer.msfx and fsuip have all together. future need adding 2 computer together seconf pc do air traffic,weather,gauges, etc secondary work and first do flight sim 3 display, and main swoftware.then can adding 3 more display to many different addons.1 display have gauge panel, and 3 have window wiev outside, future need 2 display more.
Hello what size monitor are you using for the instruments?
Is cockpit same height as real Cessna cockpit when you sit in chair?
Your sim looks fantastic! What would it take to get it certified to actually log time on it? Would you need an instructor?
Thanks! Certification needs much paperwork and inspection now I'm learning about. I need instructor as well.
Wow. Dang.
where did you laser cut the panel in japan?
Is this build available for sale? How much? I'm very interested. Thank you.
Take my money!
What kind and size of monitors are you using? Also how do you link them all together
He said 55” in the video 😊
In minute 1:56 is printing or laser?
What do these masks mean?
can we buy from you the various parts?
impressive, are you using arduino somewhere ?
yes, I use 4 arduino mega compatibles^^.
Nice job captain, cover your monitor black frames, using my concept, by visiting my RUclips page. It will work better on your settings since you have your monitors set 90 degrees. 😊👍
I didn't know nuns were allowed to fly planes.
Hello i love your flight panel. Do you have for sale
Sorry not yet for sale... but I would like to productize some cockpit panel in future^^
Awesome work!!!!
Brilliant!