Ultimate Guide To Rebuilding Iveco Daily Rear Suspension For Your Camper Van (pt2)
HTML-код
- Опубликовано: 14 окт 2024
- How I Fitted The Rear Leaf Springs & Shock Absorbers On My Iveco Daily Camper Van | Van / Truck Suspension Improvements / Upgrade |.
A Detailed Video on How 'I' Replace the leaf springs, shackle mounting bushes & shock absorbers upon my camper van (2005 Iveco Daily Camper Van). I also share the torque settings and bolt sizes with bolt and nut head dimensions. ( based upon the 35s-12, 2005 Iveco Daily model).
In this video (part 2 of the rear suspension), I show how 'I' installed the new Leaf Spring and Shock Absorber.
A new Transverse Leaf Spring along with the shock absorbers, Top & Bottom Suspension Arms will be installed upon the front axle within Video part 3.
If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every 2 Weeks (approximately) .
Cribbing, Jacking, Outrigger, Engineer Blocks.
Link for Cribbing Blocks (Engineer Blocks)
www.outriggerp...
Info about modern Cribbing Blocks.
www.outriggerp...
LINKS to The Parts Used Within This Video.
FEBI BILSTEIN Bush, leaf spring (Shackle Anchor Point) in the AUTODOC app m.autodoc.co.u...
DELPHI Anti roll bar link in the AUTODOC app m.autodoc.co.u...
S-TR Anti roll bar bush in the AUTODOC app m.autodoc.co.u...
FAST Spring Clamp in the AUTODOC app m.autodoc.co.u...
M16 - 140mm Bolt & Nut.
www.ebay.co.uk...
Rear Shock Absorbers.
www.ebay.co.uk...
Rear Leaf Springs.
www.ebay.co.uk...
DIY CAMPER VAN CONVERSION - Iveco Daily - REBUILD!
In no doubt within my mind! The 2005 LWB Iveco Daily with over 317.000 miles on the clock (one company owner) I bought, was ready for the scrap yard!
Over a period of a year I completely renovated / restored / recycled the van, saving it from the scrap yard.
The second year it took, was to actually build the campervan you see today.
5 Years on and our needs and uses have changed for what we need out of the van.
#iveavan #ivecodailysuspension #vanleafspring #suspension #howtoreplacevanleafsprings #ivecodailyleafspring #vansuspension #howtodo #ivecodailycamper #campervansuspension #ivecocamper #ivecodailycamperconversion #iveco #ivecodaily #ivecodailycampervan #ivecodailycamper #vanbuild #diycamper #campervanlife #vanlife #ukvanlife #selfbuildcamper #camperbuild #van
#ivecodailyjackingpoints #howtoreplaceleafsprings #ivecodailycamperconversion
Amazon store showing affiliate parts list that I've used within the van build.
www.amazon.co.uk/shop/iveavan
Useful Iveco Daily/ Facebook Groups.
Vanlifers Safe Space Group
www.facebook.c...
Self Build Campervans and Vanlife
www.facebook.c...
Self Builds U.K & Iveco Campers
www.facebook.c...
Iveco Daily Campervan Club
www.facebook.c...
Iveco Daily Owners Club
www.facebook.c...
Business Enquiries
iveavan@yahoo.com
INSTAGRAM / FACEBOOK
Follow us on Instagram
/ markcollom_iveavan
Follow us on Facebook
/ mark.collomiveavan.7
MUSIC p0133
MUSIC
All music from the Copyright owners
Epidemic Sound
On behalf of: Epidemic Sound
music from www.epidemicso...
Disclaimer:
Due to factors beyond the control of IVEAVAN, I cannot guarantee against improper use or unauthorized modifications of this information. IVEAVAN assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. IVEAVAN recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of IVEAVAN, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not IVEAVAN.
Link For Part One of the Rear Suspension Improvements & Upgrades. (Cribbing-blocks, Rear Leaf Spring & Shock Absorber Removal. 👉 ruclips.net/video/2v5G3lGb6Uw/видео.html
Parts used within the video are in the 'video description'.
Your video and your job are priceless. Thank you.
Thank you, matey 🙂👌👍...
Not only has the old girl had a facelift she’s now had a bum lift as well 😂😂
Top job as usual mark a very methodical video on the works 👍🏼👍🏼
Haha😅 thank you Paul 😁👌👍👍👍.
Excellent job mate as always 👍👍
Thank you matey 😎👌👍👍👍.
Any one wanting to do this work needs to follow yr vid mark as always clear methodical and precise with view content description and reasoning out the issues. If didn't know u were an engineer would assume mad professor status. Great vids. Je
Or just 'mad' 😅... Cheers Je 😉👍👍👍.
Great in-depth vid again mate thanks
Thank you Rod 😉👌👍👍👍.
Brilliant video mate, in-depth explanation. Also, like the new welcome intro to the video.....
Thank you matey 😉👌👍👍👍.
Very clean underside Mark.
Great video 👌👍
Cheers Mike 😎👌👍👍👍.
Excellent tutorials. Much appreciated thank you.
Thank you Lee 😉👌👍👍👍.
Got the notification bell.... Made a full English with a strong cup of Barry's tea, then sat down to eat while watching your excellent detailed presentation.
Mint 👌👌👌
Thanks so much for taking the time to film and share.
Mack and Maggie, Huddersfield
Excellent! Hope you've enjoyed the Full English guys 👌👍👍👍.
Your building a knew iveco respect m8
Yes, I've probably touched every nut and bolt upon this van now bud 😅😉👌👍👍👍.
A great video Mark I bet you had some fun doing the front spring on your own ,
Cheers Thomas 👌👍. Yes, it's been a 'headache' 😂😀👌👍👍👍.
Great to see the care and attention you give the underside of your van Mark. It looks immaculate 👍
The part where you say I've messed up my paint work says how much effort you put in to the van, nice!👌
Thanks for a great Vlog 😎👍
Ahhh cheers matey 😎👌👍👍👍.
I've just downloaded this for later buddy. Very informative videos mark. Well done,. Keep up the good work and best of luck.
No worries cheers matey 😉👌👍👍👍.
Well done Mark. What a great job again keep up the good work mate
Cheers matey 😎👌👍👍👍.
Looks top-notch mate!
Cheers matey 😉👌👍👍👍.
Another great video. Thanks 😊
Cheers Francis 😊👌👍👍👍.
Another great video mate 👍
Thank You Gary 😉👌👍👍👍.
Nice one Mark, just watched over lunch. Much more familiar with the back end now thanks to your videos. Can't wait to watch the front 👍🏼
Be good to know how much difference to the ride that you notice after the lot is done.
Cheers Ant 👌👍. Yes, so would I. It can't be any worse than it is now mind you 😅🙂👌👍👍👍.
Tha on par with Kevin Albert Williams..look him up he's a iron man with what he does,and so r you..another good video take care pal
No, I've not seen him, but will do, cheers matey 😉👌👍👍👍.
Iveco is very good truck
Yes, They are made like Tonka trucks 😊👌👍👍👍.
Amazing videos mate. You not using the compressed air suspension for the rear anymore.
I have an a iveco daily 2006 and suspension is shocking and will try and copy your set up
Cheers matey 😉👌👍Yes, still using the air assist suspension definitely worth doing as it totally changes the ride 😊👌👍👍👍...
Great video mate , I’m still on my iveco struggle, full paint job before fit out and many, many other jobs ! I did put a few vids on of mine and realised quickly I’m not that good at camera work ! Maybe see you on the road one day, you said to me it took you 3 years for you build, now I can see why 👍
Yes, it's very time consuming when your filming it too things take 3x longer. In the end of the day, slow and steady wins the race bud and hopefully see you and you're Iveco out on the road in the near future matey 😎👌👍👍👍.
@@Iveavan it’s getting close now starting to get back into it, I was loosing the love for a while, I’m always getting pestered welding other peoples stuff ! I will do another rough video when I get plastics back on 👍all the best
@@Iveavan iveco daily meet up this year? 👀
You are a crackin tutor. Nice video.
I never thought about it like that 😅. Thank You Richie 😉👌👍👍👍.
Great video thank you
Thank you 😀👌👍👍👍.
Top job bud 👌🏻
Thank you matey 😎👌👍👍👍.
good vid thanks lee
Thank you Lee 😉👌👍👍👍.
My next upgrade job after all my welding is done and the m.o.t is done
Excellent work mate. This might sound ridiculous and tell me if so lol, but could you do this job without jacking the van up and leave the wheels on , just stationary so to speak ?
I know it would be a little tight under there but would everything stay in place so to speak and be possible to change spring, bump stop and shocks ?
Would I need some jacks with timber under chassis to hold the weight of van whilst shocks and springs are off ? like how you did with the big block ?
Thanks
It's not impossible the way you want to do it bud, but like you say it would be tight and probably, the wheel would get in the way. Yes, you would need a axle stand and a jack to lift and take the weight of the chassis off the axle to carry out a Leaf spring change. Good luck 😉👍👍👍.
@@Iveavan okay cool that's really helpful and handy to know!!! Limited space and resources here atm so just weighing my options and possibilities up. Thanks again mate I appreciate it 👍
No worries bud 👌👍.
Hi mate just found your video great stuff I have a iveco daily lwb the front hanger for the rear leaf spring on both sides of mine are completely rotten and I can’t get them anywhere don’t what to get rid of the van the engine and gear box are in excellent condition do you have any idea where I might find them cheers
Have you tried Zeppelin or Bison? They may do them 🤔. Only other alternative would be an scrap yard or someone who's braking an Iveco upon Facebook marketplace bud 👌👍👍👍.
@@Iveavan cheers mate I will have to keep searching 👍
Good luck mate 😎👌👍👍👍...
my mounting points are broken any idea where i can get the part numbers 2005 ivevco dail box van thanks for any help
From memory, zeppelin or Bison parts should be able to help you out if it's the front mounting point bud? 😉👌👍.
www.cheapivecoparts.com
bisonparts.co.uk/
Brill stuff looks like a pain in backside of a job tho lol
Wait for the front suspension video, now that's an headache of a job to do 🤕😅, cheers matey😄👌👍👍👍.
@@Iveavan oh lol look forward to it
Heyya. Youve made this look a total breeze. I cant get over your efficiency. Not a second daliancing. Its refreshing to me a procrastinator.
Thank you, Isabel 🙂👌👍👍👍...
Hi great video where did you get the leaf spring u bolts from please
They come with the leaf springs ( Jones Spings. The link should be within the description ). Or you can buy them separately from Autodoc. 👌👍.