AWESOME! I followed your instructions exactly (I have the exact same clock!) and my clock that hasn't worked in 15 years is working and keeping perfect time!!! BRAVO! One small suggestion. Remind folks to note the time before removing the hands. I didn't and had to figure out how to adjust the time to coordinate with the cuckoo. Not hard (just loosen the hands and adjust it to reflect the number of cuckoos generated at the top of the hour and re-tighten). Excellent video, and the tip for the oil was much appreciated! :)
So helpful!! I had a cuckoo clock with chain that fell off and its been inoperable for over a year. Using your instructions, I pulled the tab off the button of the chain and simply rethreaded it on the gear. I am so appreciative of your video and instructions!
I recently purchased a used cuckoo that initially wasn’t working, which was quite disappointing. However, after following your instructions, the clock is now functioning perfectly. I’m very grateful for the guidance. Thank you!
What a great man of God and humble person. This was so fun to watch and in a woman!😂 I just bought my first cuckoo clock….wanted one for years and this video gives me some good education….if I can fix it, that would be short of a miracle🙏
My grandmother passed away this week and left me her 50's Schatz 8 day cuckoo clock. The pendulum does not stay in motion for very long. I will try cleaning it as you advise. Thank you for spreading your knowledge.
May the memories of your grandmother be blessed druszaj and may the Lord heal you and your family in this time of grief. Let me know if this video helps!
@@Genes49 Yes I was able to get it running and keeping time from the cleaning and oiling. Just be very careful of the paper baffles, very easy to damage
Thank you for this video. You're a good teacher, patient and you don't make it complicated. Thank you! But MOST of all Thank you for telling everyone about the love of Jesus. It's so true, he can fix ANYTHING! 👍🏻
I've been worried about attempting to tune up my non-functioning cuckoo clock. Your video was so easy to follow. I'm ready to buy some gear oil and get my clock running again. And thank for for your closing comment. It is great to hear a fellow man of God willing to come forward.
Thanks for the very informative video….I think I have this same model….looks to be identical and bought it in 1980. It stopped working 30 years ago or so so had it professionally cleaned and that cost almost as much as the clock did 15 years prior. Well it recently stopped working again and after watching your video it seems fairly easy to do myself so I ordered some clock oil and am eager to tear into it very soon. Thank you!
Extremely good video, thanks a lot!! Greetings from Colombia. My Cuckoo clock was purchased in Miami Florida in one of my business trips way back in 1980! It has worked flawlessly but it suddenly started to stop and the cuckoo singing was very slow. I consulted as local clock repair store here in Bogotá, and they want a small fortune for fixing it. But now, with your extremely well made video, I'm going to try to repair my clock. Incidentally, I'm surprised on how you wash the clock mechanism with just water and soap. Again thanks a lot!! EDUARDO
Make sure the gears have been dried out after you wash them. They must be bone dry with the cuckoo clock oil applied to where the gears rotate and touch each other.
This is a great video! I have the exact clock. Says it’s from W. Germany, and has a date of November 1968. You really helped me be comfortable with every aspect of the clock! Thank you so much!!!! Do you have any history behind your clock? 1968 was before the wall came down. Love that in itself!
Amazing. I am looking at your clock and it looks almost exactly like the one on my living room wall and it was given to me by my family. Mine has a darker wood color, but the same overall design with pinecomb weights. It is a Schatz 8 day cuckoo clock and I think it was purchased it in the 1940s because my family member that bought it died in 1953. It was boxed up in 1975 when I was a kid and then in 2015, I found a local clock repair shop. It was running well until last summer when it began stopping unpredictably, so I think it needs cleaning. I am industrious as you are but a bit nervous about cleaning it myself but it does not seem very complicated. This seems to be a good weekend project, I'll let you know how it works out. Thanks for the video.
@@FixiT-Rick Rick, well today's the day that I am going to attempt to clean, oil, and get my clock working again. I bought the oil that you recommended and I'll let you know how it goes.
Well Rick, I was not able to get it fixed, but I did find a cucko clock repair shop near me. The clock shop that I found back in 2016 is now closed, and I was very surprised to find this new shop. I'll just take it in this week and have the pro clean it up and get it running. Thanks for your video and I enjoyed trying.
This was a great vid. My grand sons pulled hard on our clock and messed it up. I though it was just the chains were off their pulleys. I got them back on successfully and it kucus etc. the problem I’m having is the weight for the kucu will go down when it kucus but won’t go back up when I pull the chain. Any suggestions?
@@FixiT-Rick Unfortunately, we have one good clock guy here in San Antonio. He's been here for many years, but he won't take new customers. I guess I could drive it to Dallas or Houston.
@@FixiT-Rick And there's the problem. There supposedly one competent clock repair guy that works on cuckoo clocks. He is retired and doesn't accept new clients.
@@FixiT-Rick `it did work :) It's now running smoothly. I can hear some slight metal on metal somewhere in it, so maybe there's a spot i need to add more oil. It was in a dusty flat in London so had seized up a bit over the years. Thanks!
Thanks for the video Rick. We (my wife) have 4 German Cuckoos and some other wall clocks and I have always been nervous about working on them. With your video I believe I can tackle the one that no longer works then clean and oil the rest. Thanks, the video makes this look easy as long as I work slowly and carefully. Ordering clock oil now!
My dad bought 2 clocks kinda like yours 35 years ago and neither work. One was thrown out of a moving car. 😢 The other might be dirty. I've watched a few videos but they were too complicated or you had to be a member. When I saw you explaining so easily, you gave me the confidence to crack it open. Is there an alternative oil besides the oil you used? What if a good cleaning doesn't make it work? Is there a next step? Thank you for your videos and your voice for God. Nowdays people are a bit afraid to speak out about Father, Son and Holy Sprit. Love you my brother
My cuckoo clock with a music box is frozen. Nothing moves, if you removed the music box and reinstalled it, would that resolve the issue? Thank you, Lynn
Hello Rick, thanks a lot for your video. I've got an old cuckoo clock (I love it) and I am planning to clean it and make it work (the bird and dancers work well but the clock is not moving). I already bought the oil. this is going to be my little project for today :) thanks a lot for the message at the end of the video.
Any suggestions for a clock that had a cat pull the cones...we were cat sitting for people moving from Washington to Alaska and we think the cat pulled a cone. When the chain is wound, the weight of the cone immediately pulls the chain to the other end.
Que hermosa pieza de colección ese reloj cucu!! Lo bueno es que hay personas como vos que uno mira y aprende. Felicitaciones! Muy buen video. 👍👏👏👏👏👏 un saludo desde Argentina!!
Thanks. I have basically the same clock, and it would only run a couple of hours at a time. Washing the movement with detergent as you show has worked so far.
I have just encountered your video. The clock now runs as long as I do not attach the pendulum. As soon as it is attached the clock stops! Why? Could you help perhaps?
The gears are probably dirty, or the pendulum needs to be slightly adjusted. Also, if the cuckoo clock is tilted away from the wall at just the right angle, it won’t work it has to be perfectly level and straight.
I inherited a beautiful old cuckoo Clock and it worked great at my friends home, I have had no luck getting it to go. I cannot seem to get it perfectly level, what is the secret to that?
Thanks for watching Fix iT Rick! If you want to watch more videos, subscribe, and comment on things you want to see get fixed! Thanks for sharing this video!
One thing to note is that this is an 8 day movement which is less common than a 1 day. There are also cuckoo clocks with dancers or a person on a swing. All of these mean different sizes and amount of pine cones that must be located in the correct holes or they pull down in the wrong direction.
I have a identical clock like yours. However the chain doesn’t hold the weight. The second problem is the big hand and small hand stop moving. Thoughts ?
Great question! I would like to know more about why you think the chain does not hold the weight? And if both hands stopped moving that means the gears are dirty and you just need to clean it like how I demonstrated in this video and use Clock gear oil to lubricate the gears properly. The link for the Clock lubricating oil is in the description. Does this help you?
@@FixiT-Rick as I rewind the clock I pull the chain and weight all the way to top/bottom of the clock. When I release or let go the weight drops and the weight falls to the bottom. It’s like the pully is off track
my cuckoo isnt coming out... but i noticed that there is that M shape wire that isn't connected to anything... but not sure what it could be doing in there? also the cuckoo will come out if i move the gears...
Thanks for sharing. I just bought a clock very similar to yours from a friend of mine. I’ve only had it for two days, and for some reason the pendulum won’t stay in motion. The clock seems to be level. It worked for a day or two. Not sure if the pendulum got slightly bent or something.
Glad this video might help you. Whenever the gears are covered in dust they will eventually prevent the cuckoo clock pendulum swinging. Also really important, the pendulum needs to be secured to the pendulum pin. Kind a like it’s pinching the pendulum pin so it doesn’t swing loosely. Hopefully this works out for you, let me know.
This may be too late for you to answer, but... I bought a Schmeckenbelcher musical cuckoo clock a few weeks ago. It had not been run in quite a while, from what the person I bought it from said. It was dusty inside and I cleaned it up. It did not have a pendulum, but the pendulum wire ran fine for hours at a time. I watched a video on how to lubriucate the movement, and even though it seemed to be running fine, I lubricated it using the same oil that you used in your video. Ever since then, I cannot get the clock to keep running - it stops after a few seconds, with or without the pendulum attached. I only used a drop of oil on each gear pivot point, and I wiped up any excess oil - but it will not stay running unless I put two weights on the chain. I have not taken the movement out of the clock to clean it like you did in your video. I am hesitant to do so because of the musical movement. What do I need to do to get the clock running again? Thanks in advance.
Take lots of pictures and remove one thing at a time. Dirt is probably the one thing that’s hindering your cuckoo clock. If you can carefully and slowly remove the gearbox, you can clean it, dry it, and put it all back together. That’s my best guess.
@@FixiT-Rick I took the clock down, sprayed the movement with compressed air, sprayed a little WD40 on the gear pivot points, then took a heat gun and dried out the movement, thinking that maybe the heat gun would spread the oil out a little thinner on the pivot points. I let the movement air out for a day, then used the heat gun again - and now the clock is running perfectly! Amazing!
My daughter brought a cuckoo clock home from the thrift. It doesn't have a pendulum or weights. I've gone on eBay to try and find some, and the weights are different. Is there a way to know what weight to buy? Thanks for your time ❤🕊
Try to find something loose or out of place where the Cuckoo is connected. It’s always something small that can disconnect it from working. Start looking at the thing you want to work and ask very simple questions like, is that supposed to be loose? Did something fall out of place?
@@FixiT-Rick she is running fine now less the bird or gong. I completely cleaned it. will start looking in it to see if I can find something. My Bird is relieved though the cuckoo scared her
received a new 8 day cuckoo clock with music box for Christmas. The clock was shipped from Germany, everything works ok but the cuckoo on anything over 6 chimes starts off normal, then speeds up in the middle, then slows back down at the end. Gets annoying on the longer chimes as the bellows speed way up in the middle of the sequence. Is this an easy fix or should I take it to a shop for warranty repair? Nearest shop to me is a 3 hour drive one way.
Thank you for this video and the awesome music befitting a Texan! I have the same identical old clock as the one you worked on. It was my first cuckoo clock about 40 years ago and I went cuckoo over them. I had a musical one worked on a couple of times because the music stopped and it cost me an arm and leg. My big hunter clock like yours fell off the wall one day and my husband wanted to trash it. I took it under my care and glued back the broken wooden pieces and bought new bellows. That baby runs but it will not cuckoo. Does a clock this old have a silencer that perhaps is keeping the bird inside? I appreciate any advise.
Yes, they do have a way to silence the cuckoo. If the cuckoo door is closed shut then it will not make a sound. The cuckoo has to come out in order to make music or a sound of some kind. Glad you saved your clock! 🐦 🕰
I been wanting one of these cool clocks I see them at the swapmeets from time to time , Next time I will get one and fix it the Hunt is on!!!!!!!!! Blessings from So California
I have that *same* exact clock, but mine stopped working about 18 years ago & no one in my drivable area fixes them. What if you need to replace the bellows??? Or something in the gears is not right? I miss it so much, I couldn’t believe when I clicked on this & saw ‘mine’ again! 😢 😢 So sad.
Hi again Rick - managed to disassemble and reassemble my cuckoo clock, which I started 4 months ago, but I cannot work out how the rod that connects the bellows to the mechanism fits onto the staple at the bellows end! Have peered at and enlarged all the video but cannot see enough to work it out. Don't want to push it too hard in case it's the wrong way and snaps. Can you demonstrate please?! I took lots of pics and video but didn't photograph that bit!
When it comes to fixing cuckoo clocks, it's best to touch or clean as little as possible. These clocks are very delicate. Amazing technology for their time!
Thanks for sharing this video. I just purchased what looks like the identical clock. Two issues seem to be at hand. First is the clock has run for no more than three hours without stopping. Second is that the clock seems to always stop after the cuckoo sings at the top of the hour. I have a bim bam mantel clock that I have worked on in the past but cuckoo clocks are new to me. Special oil ordered as it is quite dusty. The top of the hour thing baffles me. Any suggestions?
I have more or less the same clock... It's a 1970 West German 8 day Cuckoo clock... this clock was sitting in a box in a barn since 1991. I have cleaned and oiled the clock and I am having two issues. The clock runs but as soon as I add the pendulum it stops. Without the pendulum it is running way to fast 20 minutes = 1 hour. The other issue is the hour hand has a metal piece that fits in first. That metal piece has come out... Can I glue it back in? How do i get it lined up with the time before gluing it? Last mine has no finish or stain on it... Can I statin it without damaging any of the functionality?
I have a similar one . One of the papers on the whistle is torn Haven't had time yet but am looking forward to fixing it. It has a bird and a little leather mouse. Not sure where the mouse fits in tho
Hello kind sir, I happened upon your video because I accidentally stepped on a chain when moving my cuckoo clock. Now the bird won't come out. Do you think if I follow the steps in your video, it will fix this problem that I stupidly created? I'm so sick of myself right now 😢
Oh my goodness! My husband just pulled on the weight and it cuckoo'd!!! Not sure if it will continue working because I pulled on the weight too and it didn't work. God answers prayers for sure!!!❤🙏
So when you rechaing it, they both come through the middle , so one clockwise one anti-clockwise...or is it because you are rightie? It probably doesnt matter
If the chain easily turns in one direction, for example, if the gear easily rotates clockwise, you want the side that turns with the most resistance to be where the counterweight hangs on.
Great video. Hope your clocks are not like mine. Mine worked for over 30 years but I never oiled it. Now the place where the pendulum weight shaft goes through the brass plate is worn out. Moral of the story - make sure you oil yours periodically so that does not happen to yours.
Hi Thanks for the video. I also have a 1day cuckoo clock. The clock is ticking, one chain and weight are going. But the other weight doesn't move. I only can pull it up. So the bird doesn't cuckoo What can I do about that problem?
Thank you for your replay That wasn't the problem It was the hammer and the gong The two held each other stuck so the chain for the cuckoo didn't run. I hope you understand, I am from Holland😁
I just received a new one day cuckoo clock from Germany as a gift. Every time i pull the chain to move the time weight back up, the clock pendulum stops. I don’t always catch it right away, so I have to reset the time & start the pendulum. I don’t have the cuckoo on.
Thank you for this video Bless you. I made a mistake of setting the clock by moving hands anti clock wise and now the cuckoo stopped coming out . The cuckoo is stuck and does not come out . It's not stuck as the bellows are moving and the bird comes out manually
Pur avendo seguito le istruzioni ed il video per far combaciare l'ora coni battiti del cucù ma suona sempre quindici minuti prima,come fare?Grazie a chi mi aiuta.
Il pendolo deve essere regolato in modo che il suono del ticchettio sia solo un po 'più lungo. Di solito, ciò significa rimuovere il pendolo, allentare una vite e far scorrere il peso più verso il suolo. Fammi sapere cosa succede!
Before washing the movement in detergent and water, soak the movement in Mineral Spirits (paint thinner) for 15 minutes. Mineral Spirits is a much more effective solvent at dissolving old oil. Then wash the movement in water and detergent (If you have an ultrasonic cleaner, it is even better than washing the movement in a sink). Be careful with that heat gun, use a low heat setting. Too much heat is Not good for any clock movement.
That’s right. The small bag is what blows air into a whistle making the cuckoo sound. They are called “bellows” and yes they rip over time. They can be replaced.
Hi,I need your help,I have a one day cuckoo and I'm having a problem with it,the chain incharge of the cuckoo bird as soon I install the pine weight goes down all the way and the bird start singging with out stoping, I can not put the weight,can you please tell me how to fix that problem ? Thanks
You didn’t say to rinse the movement after cleaning! Now that soap residue can break down the oil you put on the movement. Also, the clock was not working properly in the time lapse at the end. The bird never came out.
If the cuckoo appears, listen to how many times is make the cuckoo sound. The number of times it cuckoos is the hour. 6 cuckoos calls, means 6 o’clock.
@@FixiT-Rickthanks like I said I have 4 one that has music with dancers runs flawlessly and this version is JUNK. I paid a guy (local clock/watch repair, talked a good game) $400 to redo it. ran 6 moths and got progressively worse again over a year. now it runs/stops/hangs up around 5 till sometimes nothing consistent, tried lightly oiling it to smooth it up, made sure it was level and adjusted, watched every video on youtube...it's going to be a wall ornament before I spend more time on it.
You missed the point I wanted to see, I removed the back of my cuckoo clock and don’t know how to get the arm hooked back into the spring (you showed putting your finger through the hole to release it, but not how to replace it
Hey Rick, I have a cuckoo clock and one of the weights drops to the floor and pendulum doesn't swing. It's a small clock from west Germany . Best Wishes! Nice video!
Hey there Caramia! The cuckoo clock needs to be at least 7 feet high from the floor. And the pendulum needs to sit nice and snug on the part that swings. Thanks for watching the video!
Not a good way to clean it, trapped water will rust. If you use water which is not recommend, you should at least rinse in alcohol to try and displace the water. Then dry.
I thought you did a pretty good job with the video BUT not everyone is your age so the music is too loud and overrides your voice. My guess is more older folks will be using this than 30 year olds. Good job other wise. Thanks
AWESOME! I followed your instructions exactly (I have the exact same clock!) and my clock that hasn't worked in 15 years is working and keeping perfect time!!! BRAVO! One small suggestion. Remind folks to note the time before removing the hands. I didn't and had to figure out how to adjust the time to coordinate with the cuckoo. Not hard (just loosen the hands and adjust it to reflect the number of cuckoos generated at the top of the hour and re-tighten). Excellent video, and the tip for the oil was much appreciated! :)
YES!! I did notice that one step needed to be addressed.
So helpful!! I had a cuckoo clock with chain that fell off and its been inoperable for over a year. Using your instructions, I pulled the tab off the button of the chain and simply rethreaded it on the gear. I am so appreciative of your video and instructions!
I recently purchased a used cuckoo that initially wasn’t working, which was quite disappointing. However, after following your instructions, the clock is now functioning perfectly. I’m very grateful for the guidance. Thank you!
What a great man of God and humble person. This was so fun to watch and in a woman!😂 I just bought my first cuckoo clock….wanted one for years and this video gives me some good education….if I can fix it, that would be short of a miracle🙏
You ROCK, Shelly! Thank you for your kind words and glad this video points you to Jesus and solving life’s problems and challenges! ✝️ 🛠
Where are you? I wish you were in Houston, so I can bring to you. I am confused to fix mine
My grandmother passed away this week and left me her 50's Schatz 8 day cuckoo clock. The pendulum does not stay in motion for very long. I will try cleaning it as you advise. Thank you for spreading your knowledge.
May the memories of your grandmother be blessed druszaj and may the Lord heal you and your family in this time of grief. Let me know if this video helps!
I have this exact problem with this exact clock. I’m going to try clean and oiling it as well. I would like to know if that fixed it as well
@@Genes49 Yes I was able to get it running and keeping time from the cleaning and oiling. Just be very careful of the paper baffles, very easy to damage
I have the same clock buy mine is seriously like 3 times smaller than yours! Why??
Not sure, I’ll bet you’ll figure it out though.
Thank you for this video. You're a good teacher, patient and you don't make it complicated. Thank you! But MOST of all Thank you for telling everyone about the love of Jesus. It's so true, he can fix ANYTHING! 👍🏻
Lorna, thank you for your kind words and may the Lord bless you today!
I've been worried about attempting to tune up my non-functioning cuckoo clock. Your video was so easy to follow. I'm ready to buy some gear oil and get my clock running again. And thank for for your closing comment. It is great to hear a fellow man of God willing to come forward.
Once your clock is up and running again, please let me know! Also, we are spreading the Gospel to the ends of the Earth with this channel!!!
I also love that you are a man of God. I work for him too..
Well, did you get that clock fixed? Oh we know you claim to do this & that, but doing nothing is all you do!
Me too!
I have that exact clock I bought in Germany about 28 years ago. Nice video!
Thanks! 👍
Thanks for the very informative video….I think I have this same model….looks to be identical and bought it in 1980. It stopped working 30 years ago or so so had it professionally cleaned and that cost almost as much as the clock did 15 years prior. Well it recently stopped working again and after watching your video it seems fairly easy to do myself so I ordered some clock oil and am eager to tear into it very soon. Thank you!
Awesome, yeah they can be pretty expensive to have someone else fix it. The cuckoo clock needs to be lubricated every six months or so.
Good video , straight forward , I found a bad pressure sensor on mine , replaced it and now my cuckoo clock works great .
Thanks for this info. I think I may do this annually or every couple of years instead of waiting until it croaks.
Thank you for the detailed cleaning instructions! God Bless Brother!!
Great video! Just rescued a vintage cuckoo clock from the dumpster. Thank you for the links to the oil
You’re very welcome! Let me know in the comments how your cuckoo clock turned out! Awesome.
Extremely good video, thanks a lot!! Greetings from Colombia. My Cuckoo clock was purchased in Miami Florida in one of my business trips way back in 1980! It has worked flawlessly but it suddenly started to stop and the cuckoo singing was very slow. I consulted as local clock repair store here in Bogotá, and they want a small fortune for fixing it. But now, with your extremely well made video, I'm going to try to repair my clock. Incidentally, I'm surprised on how you wash the clock mechanism with just water and soap. Again thanks a lot!! EDUARDO
Make sure the gears have been dried out after you wash them. They must be bone dry with the cuckoo clock oil applied to where the gears rotate and touch each other.
This is a great video! I have the exact clock. Says it’s from W. Germany, and has a date of November 1968. You really helped me be comfortable with every aspect of the clock! Thank you so much!!!! Do you have any history behind your clock? 1968 was before the wall came down. Love that in itself!
Amazing. I am looking at your clock and it looks almost exactly like the one on my living room wall and it was given to me by my family. Mine has a darker wood color, but the same overall design with pinecomb weights. It is a Schatz 8 day cuckoo clock and I think it was purchased it in the 1940s because my family member that bought it died in 1953.
It was boxed up in 1975 when I was a kid and then in 2015, I found a local clock repair shop. It was running well until last summer when it began stopping unpredictably, so I think it needs cleaning. I am industrious as you are but a bit nervous about cleaning it myself but it does not seem very complicated. This seems to be a good weekend project, I'll let you know how it works out. Thanks for the video.
As long as the clock gears are nice and dry before using the cuckoo clock oil, you’ll do fine!
@@FixiT-Rick Rick, well today's the day that I am going to attempt to clean, oil, and get my clock working again. I bought the oil that you recommended and I'll let you know how it goes.
Well Rick, I was not able to get it fixed, but I did find a cucko clock repair shop near me. The clock shop that I found back in 2016 is now closed, and I was very surprised to find this new shop. I'll just take it in this week and have the pro clean it up and get it running. Thanks for your video and I enjoyed trying.
Good effort!
@@FixiT-Rick Thanks!
This was a great vid. My grand sons pulled hard on our clock and messed it up. I though it was just the chains were off their pulleys. I got them back on successfully and it kucus etc. the problem I’m having is the weight for the kucu will go down when it kucus but won’t go back up when I pull the chain. Any suggestions?
Clocks are delicate. Something simple might have become out of place. Should look obvious.
I have this very same clock, and it won't stay running! I'm terrified to even attempt a repair. You really made it look easy.
If you’re feeling unsure, then I would have a professional clock repair man take a look at it.
@@FixiT-Rick Unfortunately, we have one good clock guy here in San Antonio. He's been here for many years, but he won't take new customers. I guess I could drive it to Dallas or Houston.
@@FixiT-Rick And there's the problem. There supposedly one competent clock repair guy that works on cuckoo clocks. He is retired and doesn't accept new clients.
Great! How, exactly, do you adjust the beat ?????
The swinging part adjusts by pulling it up or down to increase or decrease speed.
I wnt to know can you paint it a gain and whar tipe of paint must i use it is brownis the same one like yours i want to ceep the value of it
I would bring the clock to the professionals to be painted. That way everything looks spectacular.
@@FixiT-Rick im far far away from you i am in namibia windhoek and you i think in germany
Good Video, I am following it, my local clock repair guy wants like 500+ To do this. I passed and took it back, doing it myself
This was such a relaxing video to watch and thank you. I will try this on my clock :)
Very nice of you to say Jonny. I look forward to making more videos just like this one. Let me know in the comments how your clock turns out. 👊🤠
@@FixiT-Rick `it did work :) It's now running smoothly. I can hear some slight metal on metal somewhere in it, so maybe there's a spot i need to add more oil. It was in a dusty flat in London so had seized up a bit over the years. Thanks!
That’s so awesome. I’m grateful this video helped you fix your cuckoo clock! She made need attention every 6 months just to keep her going.
Your video was great! This is exactly what I need to do to my Cuckoo clock.
Thank you. I am going to attempt to follow your instructions. Thanks again. God Bless.
I loved your video. I think you gave me hope to fix mine. I will have to watch 10 more times, but I will try.
You can do it!
Thanks for the video Rick. We (my wife) have 4 German Cuckoos and some other wall clocks and I have always been nervous about working on them. With your video I believe I can tackle the one that no longer works then clean and oil the rest. Thanks, the video makes this look easy as long as I work slowly and carefully. Ordering clock oil now!
You’re welcome Jim! Our clock is still working to this day! Let me know how this turns out for you guys.
Terrific video. So nice to watch someone who knows what they are talking about.
You ROCK! Glad this video is helping you!
Amen my brother, thank you for your help with the Cuckoo clock and the wonderful message of Jesus!
My dad bought 2 clocks kinda like yours 35 years ago and neither work. One was thrown out of a moving car. 😢 The other might be dirty. I've watched a few videos but they were too complicated or you had to be a member. When I saw you explaining so easily, you gave me the confidence to crack it open. Is there an alternative oil besides the oil you used? What if a good cleaning doesn't make it work? Is there a next step? Thank you for your videos and your voice for God. Nowdays people are a bit afraid to speak out about Father, Son and Holy Sprit. Love you my brother
Great video. I'm now emboldened to buy a non-working Cuckoo clock and fix it myself. That Cuckoo clock you have is the exact one I want.
I'm sure you'll make it happen Michael! Thanks for watching the video!
What is a good price to buy a non working one at?
@NeverforgetwhattheJewsdidtothe me personally, I wouldn’t pay for than $50. If the clock is really beautiful, maybe $75.
My cuckoo clock with a music box is frozen. Nothing moves, if you removed the music box and reinstalled it, would that resolve the issue? Thank you, Lynn
Hello Rick, thanks a lot for your video. I've got an old cuckoo clock (I love it) and I am planning to clean it and make it work (the bird and dancers work well but the clock is not moving). I already bought the oil. this is going to be my little project for today :) thanks a lot for the message at the end of the video.
Excellent! Let me know how when the project is done!
Any suggestions for a clock that had a cat pull the cones...we were cat sitting for people moving from Washington to Alaska and we think the cat pulled a cone. When the chain is wound, the weight of the cone immediately pulls the chain to the other end.
That’s hysterical!! I remember my clock did that, but I believe I put the cones on the incorrect side.
Que hermosa pieza de colección ese reloj cucu!! Lo bueno es que hay personas como vos que uno mira y aprende. Felicitaciones! Muy buen video. 👍👏👏👏👏👏 un saludo desde Argentina!!
¡Gracias por ver el video mi amigo! 👊😎
Thanks. I have basically the same clock, and it would only run a couple of hours at a time. Washing the movement with detergent as you show has worked so far.
Awesome. Glad this video could help!
I have just encountered your video. The clock now runs as long as I do not attach the pendulum. As soon as it is attached the clock stops!
Why? Could you help perhaps?
The gears are probably dirty, or the pendulum needs to be slightly adjusted. Also, if the cuckoo clock is tilted away from the wall at just the right angle, it won’t work it has to be perfectly level and straight.
I inherited a beautiful old cuckoo Clock and it worked great at my friends home, I have had no luck getting it to go. I cannot seem to get it perfectly level, what is the secret to that?
Thanks for watching Fix iT Rick! If you want to watch more videos, subscribe, and comment on things you want to see get fixed! Thanks for sharing this video!
One thing to note is that this is an 8 day movement which is less common than a 1 day. There are also cuckoo clocks with dancers or a person on a swing. All of these mean different sizes and amount of pine cones that must be located in the correct holes or they pull down in the wrong direction.
I have a identical clock like yours. However the chain doesn’t hold the weight. The second problem is the big hand and small hand stop moving. Thoughts ?
Great question! I would like to know more about why you think the chain does not hold the weight? And if both hands stopped moving that means the gears are dirty and you just need to clean it like how I demonstrated in this video and use Clock gear oil to lubricate the gears properly. The link for the Clock lubricating oil is in the description. Does this help you?
@@FixiT-Rick as I rewind the clock I pull the chain and weight all the way to top/bottom of the clock. When I release or let go the weight drops and the weight falls to the bottom. It’s like the pully is off track
@@BigJake2023 Same issue I have. The weight drops to the floor.
That sounds like an interesting problem. The gears may have moved out of place.
my cuckoo isnt coming out... but i noticed that there is that M shape wire that isn't connected to anything... but not sure what it could be doing in there? also the cuckoo will come out if i move the gears...
I'm not sure what the issue could be.
Thanks for sharing. I just bought a clock very similar to yours from a friend of mine. I’ve only had it for two days, and for some reason the pendulum won’t stay in motion. The clock seems to be level. It worked for a day or two. Not sure if the pendulum got slightly bent or something.
Glad this video might help you. Whenever the gears are covered in dust they will eventually prevent the cuckoo clock pendulum swinging. Also really important, the pendulum needs to be secured to the pendulum pin. Kind a like it’s pinching the pendulum pin so it doesn’t swing loosely. Hopefully this works out for you, let me know.
The exact one I have! Ty.
Sweet!
This may be too late for you to answer, but... I bought a Schmeckenbelcher musical cuckoo clock a few weeks ago. It had not been run in quite a while, from what the person I bought it from said. It was dusty inside and I cleaned it up. It did not have a pendulum, but the pendulum wire ran fine for hours at a time. I watched a video on how to lubriucate the movement, and even though it seemed to be running fine, I lubricated it using the same oil that you used in your video. Ever since then, I cannot get the clock to keep running - it stops after a few seconds, with or without the pendulum attached. I only used a drop of oil on each gear pivot point, and I wiped up any excess oil - but it will not stay running unless I put two weights on the chain. I have not taken the movement out of the clock to clean it like you did in your video. I am hesitant to do so because of the musical movement. What do I need to do to get the clock running again? Thanks in advance.
Take lots of pictures and remove one thing at a time. Dirt is probably the one thing that’s hindering your cuckoo clock. If you can carefully and slowly remove the gearbox, you can clean it, dry it, and put it all back together. That’s my best guess.
@@FixiT-Rick I took the clock down, sprayed the movement with compressed air, sprayed a little WD40 on the gear pivot points, then took a heat gun and dried out the movement, thinking that maybe the heat gun would spread the oil out a little thinner on the pivot points. I let the movement air out for a day, then used the heat gun again - and now the clock is running perfectly! Amazing!
My daughter brought a cuckoo clock home from the thrift. It doesn't have a pendulum or weights. I've gone on eBay to try and find some, and the weights are different. Is there a way to know what weight to buy? Thanks for your time ❤🕊
If the manufacturer name is on the cuckoo clock, that’s where I would start searching online for the weights.
@@FixiT-Rick Thank you!!!
thank you, also my gong doesnt gong and the cuckoo coos at 2 and its 3 and cooes on the 15 min. Mine is very very old
Try to find something loose or out of place where the Cuckoo is connected. It’s always something small that can disconnect it from working. Start looking at the thing you want to work and ask very simple questions like, is that supposed to be loose? Did something fall out of place?
@@FixiT-Rick she is running fine now less the bird or gong. I completely cleaned it. will start looking in it to see if I can find something. My Bird is relieved though the cuckoo scared her
received a new 8 day cuckoo clock with music box for Christmas. The clock was shipped from Germany, everything works ok but the cuckoo on anything over 6 chimes starts off normal, then speeds up in the middle, then slows back down at the end. Gets annoying on the longer chimes as the bellows speed way up in the middle of the sequence. Is this an easy fix or should I take it to a shop for warranty repair? Nearest shop to me is a 3 hour drive one way.
Not sure. Someone may have solved this problem in another video, but if there is a manual on how to change the settings, that’s where I would start.
Nice video i really enjoyed it i like coco clocks and i have a one since 40 years ago its still working very well thank you allot and go on
Thank you for your kind words, you're such a wise man!
Wow! Very impressed, thank you!!
You ROCK! You’re welcome! 👍
Great vid Rick! Intricate, indeed! Happy New Year!!! 🎉
Thank you Auntie! Happy New Year! 🥳
Thank you for this video and the awesome music befitting a Texan! I have the same identical old clock as the one you worked on. It was my first cuckoo clock about 40 years ago and I went cuckoo over them. I had a musical one worked on a couple of times because the music stopped and it cost me an arm and leg. My big hunter clock like yours fell off the wall one day and my husband wanted to trash it. I took it under my care and glued back the broken wooden pieces and bought new bellows. That baby runs but it will not cuckoo. Does a clock this old have a silencer that perhaps is keeping the bird inside? I appreciate any advise.
Yes, they do have a way to silence the cuckoo. If the cuckoo door is closed shut then it will not make a sound. The cuckoo has to come out in order to make music or a sound of some kind. Glad you saved your clock! 🐦 🕰
Thanks for your help and reminder about Jesus.
Glad this video could help! God Bless! ✝️
1:20 Is The Mechanism/Movement Of The Clock Not The Gear Box
Beautiful! ⏰
@@FixiT-Rick Thanks! That was a quick reply!
I been wanting one of these cool clocks I see them at the swapmeets from time to time , Next time I will get one and fix it the Hunt is on!!!!!!!!! Blessings from So California
Sounds good George! When you find a clock and get it working again, let me know in the comments! God Bless!
Great video! Thank you!
You're welcome!
I have that *same* exact clock, but mine stopped working about 18 years ago & no one in my drivable area fixes them. What if you need to replace the bellows??? Or something in the gears is not right? I miss it so much, I couldn’t believe when I clicked on this & saw ‘mine’ again! 😢 😢 So sad.
Hi again Rick - managed to disassemble and reassemble my cuckoo clock, which I started 4 months ago, but I cannot work out how the rod that connects the bellows to the mechanism fits onto the staple at the bellows end! Have peered at and enlarged all the video but cannot see enough to work it out. Don't want to push it too hard in case it's the wrong way and snaps. Can you demonstrate please?! I took lots of pics and video but didn't photograph that bit!
Thank you Christine! This part of the video might be able to help you - 01:22
Why did not you take the movement apart? How do I know if I should take the movement apart?
When it comes to fixing cuckoo clocks, it's best to touch or clean as little as possible. These clocks are very delicate. Amazing technology for their time!
Thank you
Thank you for this❤
Thanks for sharing this video. I just purchased what looks like the identical clock. Two issues seem to be at hand. First is the clock has run for no more than three hours without stopping. Second is that the clock seems to always stop after the cuckoo sings at the top of the hour. I have a bim bam mantel clock that I have worked on in the past but cuckoo clocks are new to me. Special oil ordered as it is quite dusty. The top of the hour thing baffles me. Any suggestions?
Dirt and dust will bing up the gears and stop moving them. A good cleaning is all she needs. Thanks for watching the video!
I have more or less the same clock... It's a 1970 West German 8 day Cuckoo clock... this clock was sitting in a box in a barn since 1991. I have cleaned and oiled the clock and I am having two issues. The clock runs but as soon as I add the pendulum it stops. Without the pendulum it is running way to fast 20 minutes = 1 hour. The other issue is the hour hand has a metal piece that fits in first. That metal piece has come out... Can I glue it back in? How do i get it lined up with the time before gluing it? Last mine has no finish or stain on it... Can I statin it without damaging any of the functionality?
For your Pendulum issue, I would pinch the point where the Pendulum hangs on the hanger. As for the other, I’m not sure.
I have a similar one . One of the papers on the whistle is torn
Haven't had time yet but am looking forward to fixing it. It has a bird and a little leather mouse. Not sure where the mouse fits in tho
The paper on the whistle was also torn. Simple masking tape took care of the issue!
Hello kind sir, I happened upon your video because I accidentally stepped on a chain when moving my cuckoo clock. Now the bird won't come out. Do you think if I follow the steps in your video, it will fix this problem that I stupidly created? I'm so sick of myself right now 😢
Oh my goodness! My husband just pulled on the weight and it cuckoo'd!!! Not sure if it will continue working because I pulled on the weight too and it didn't work. God answers prayers for sure!!!❤🙏
So when you rechaing it, they both come through the middle , so one clockwise one anti-clockwise...or is it because you are rightie? It probably doesnt matter
If the chain easily turns in one direction, for example, if the gear easily rotates clockwise, you want the side that turns with the most resistance to be where the counterweight hangs on.
Great video. Hope your clocks are not like mine. Mine worked for over 30 years but I never oiled it. Now the place where the pendulum weight shaft goes through the brass plate is worn out. Moral of the story - make sure you oil yours periodically so that does not happen to yours.
Thank you for your input, Dan!
@danmills2753 All Cuckoo Clock parts are fairly standard including the movement. If you like the clock and want it to work again, it can be done.
Must the wheights on the out sid of the change
How much this cuckoo clock oil costs and from where can we get
Great question, here is inexpensive clock oil!
Cuckoo Clock Gear Oil - amzn.to/2ModTKk
Hi
Thanks for the video.
I also have a 1day cuckoo clock.
The clock is ticking, one chain and weight are going. But the other weight doesn't move.
I only can pull it up.
So the bird doesn't cuckoo
What can I do about that problem?
One chain is for the cuckoo bird and the other is for the clock time. A good cleaning might be needed.
Thank you for your replay
That wasn't the problem
It was the hammer and the gong
The two held each other stuck so the chain for the cuckoo didn't run.
I hope you understand, I am from Holland😁
The water won't rust anything?
It needs to be dried immediately with a hair dryer. Then apply the clock lubricant.
I just received a new one day cuckoo clock from Germany as a gift. Every time i pull the chain to move the time weight back up, the clock pendulum stops. I don’t always catch it right away, so I have to reset the time & start the pendulum. I don’t have the cuckoo on.
The Pendulum needs to be firmly attached to the part that swings. If the pendulum is loose, that problem will happen.
@@FixiT-Rick thank you. We will check that.
Great video thank you very much
Glad you enjoyed it
Thank you for this video Bless you.
I made a mistake of setting the clock by moving hands anti clock wise and now the cuckoo stopped coming out .
The cuckoo is stuck and does not come out . It's not stuck as the bellows are moving and the bird comes out manually
Interesting problem. Let me know if you figure out what went wrong.
The minute hand on my quail cuckcoo clock is extremely tight and will not move. The screw mechanism wont budge either. Advise please.
I would use needle nose pliers, mainly a Gerber, to squeeze the nut gently give it some force to loosen it.
What do I do if the cuckoo bird has stopped coming out? The mechanism clicks but no birdie 😔
If the bird sits inside the cuckoo clock, check to see if the bird has been disconnected from clock itself.
thank you!
Good but mine has a third chain...the one not working
Tough to figure out without seeing the clock. Bet there are community websites that could answer that better than me.
I have a clock that looks just like that, but with people at the top where the bird would go. Not sure if it works.
The gears usually just need a good cleaning
Pur avendo seguito le istruzioni ed il video per far combaciare l'ora coni battiti del cucù ma suona sempre quindici minuti prima,come fare?Grazie a chi mi aiuta.
Il pendolo deve essere regolato in modo che il suono del ticchettio sia solo un po 'più lungo. Di solito, ciò significa rimuovere il pendolo, allentare una vite e far scorrere il peso più verso il suolo. Fammi sapere cosa succede!
Before washing the movement in detergent and water, soak the movement in Mineral Spirits (paint thinner) for 15 minutes. Mineral Spirits is a much more effective solvent at dissolving old oil. Then wash the movement in water and detergent (If you have an ultrasonic cleaner, it is even better than washing the movement in a sink). Be careful with that heat gun, use a low heat setting. Too much heat is Not good for any clock movement.
Brake cleaner works too and doesn't seem to effect the brass.
Hi my cuckoo clock, will not cuckoo??
what do I do, it running after batteries,I changed the battery still no cockoo
I haven't fixed a Cuckoo Clock that runs on batteries, sorry!
My clock has some kind of bag in it. Looks like it blew air into a whistle to create the coo coo sound. The bag is all ripped up
That’s right. The small bag is what blows air into a whistle making the cuckoo sound. They are called “bellows” and yes they rip over time. They can be replaced.
Hi,I need your help,I have a one day cuckoo and I'm having a problem with it,the chain incharge of the cuckoo bird as soon I install the pine weight goes down all the way and the bird start singging with out stoping, I can not put the weight,can you please tell me how to fix that problem ? Thanks
I’ll do some research on this.
Something might be stuck in an open position. As the pine cone is being pulled down, see if anything is separated from touching the gears.
Thank you
You’re welcome!
great video. and ok @7:53... woof wow but then that craziness at the end. bye
Thanks for watching!
One of my chains falls when I put on weight. And the chain is on the gear
The chain simply came off the teeth of the gear. ⚙️
@@FixiT-Rick I put it back on the gear but it freely moves no longer clicks
Nice video!
Thank you Gino’s Clock Channel! 🕰
I have a clock just like yours I got it in Germany in 1968 👍
Beautiful clock!
Well I made a big mistake I used wd40 what should I do
Your clock will be fine. It’s better to use the clock oil.
I’m geting it
Mine is different, hooks are 2nd and 4th chains .its a much older one
I’m not a clock expert but what appears to be the issue? Not fast enough?
You didn’t say to rinse the movement after cleaning! Now that soap residue can break down the oil you put on the movement. Also, the clock was not working properly in the time lapse at the end. The bird never came out.
Thanks for watching the video!
Thank God and Jesus for giving you the ability for restoring such a fantastic type of clock!
God is awesome! I’m so grateful to Him for subscribers like YOU! 🙏✝️
Aww! We didn’t get to hear or see the cuckoo bird display in the traditional way as it struck 6:00 pm
Did the cuckoo bird come out at all during the hour? Maybe randomly?
@@FixiT-Rick
I haven’t thought of that! I was only looking at the hands listening for its sounds to even think about that
If the cuckoo appears, listen to how many times is make the cuckoo sound. The number of times it cuckoos is the hour. 6 cuckoos calls, means 6 o’clock.
Own 4 clocks, this similar 8 day clock, Cuckoo is set up different, is the only one that wont stay running..so annoying....
Most Cuckoo Clocks simply need a good cleaning and clock oil reapplied on the gears.
@@FixiT-Rickthanks like I said I have 4 one that has music with dancers runs flawlessly and this version is JUNK. I paid a guy (local clock/watch repair, talked a good game) $400 to redo it. ran 6 moths and got progressively worse again over a year. now it runs/stops/hangs up around 5 till sometimes nothing consistent, tried lightly oiling it to smooth it up, made sure it was level and adjusted, watched every video on youtube...it's going to be a wall ornament before I spend more time on it.
Dirt and dust is the problem. A simple wash of the gear box in hot water and soap will get the junk out of it.
You missed the point I wanted to see, I removed the back of my cuckoo clock and don’t know how to get the arm hooked back into the spring (you showed putting your finger through the hole to release it, but not how to replace it
Thanks for watching the video man! Love your photo! 🇺🇸
Thanks for this video. You are right Jesus can solve our problems. Jesus is the way the truth and the life!
That’s right! Jesus is King! Thank you for watching the video.
Hey Rick, I have a cuckoo clock and one of the weights drops to the floor and pendulum doesn't swing. It's a small clock from west Germany . Best Wishes!
Nice video!
Hey there Caramia! The cuckoo clock needs to be at least 7 feet high from the floor. And the pendulum needs to sit nice and snug on the part that swings. Thanks for watching the video!
When the cuckoo bird comes out and after singing the door is not being closed automatically, how to fix it Sir ☝️
There is a little hook that should be attached to the door. Did the hook or wire fall off?
How do you know that JC loves me? How?
Not a good way to clean it, trapped water will rust. If you use water which is not recommend, you should at least rinse in alcohol to try and displace the water. Then dry.
Noted. The clock has been working since Christmas, but I see your point. We can agree that the gears must remain totally dry.
My clock stopped playing music
It’s always something small. Maybe a loose spring.
I thought you did a pretty good job with the video BUT not everyone is your age so the music is too loud and overrides your voice. My guess is more older folks will be using this than 30 year olds. Good job other wise. Thanks
The words on my screen were a little to small for me to read but I think you were trying to say thanks for the video!