I buy pmc exclusively, the 55 grain load in both bronze and xtac 5.56 is very accurate ammo, and I’m not a reloader but the brass is evidently pretty good quality. He reloads them and more than takes care of me for some brass. The rounds do look really good coming out of the box, high shine cases always.
I never had any drama with PMC. Their .223 Remington, 9mm, and .38 special are all reliable to me. The .38 special was the best--little recoil and smooth on single action in a snub nose.
been looking to find ammo and i jumped on ammotoretail.com Email: shopgun503@gmail.com Phone: +1 7402393755 they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc You can contact them through their website below ammotoretail.com Email: shopgun503@gmail.com Phon: +1 7402393755
I have been using PMC for along time especially their rifle ammo. But 9/10mm and .357 are really good brass. Never had an issue with their ammo ever. I absolutely seek it by choice in the ar because it’s usually the most reasonable price like you said.
Hey Joe, I agree. I’ve been using PMC ammunition for a number of years and had great success with it. It’s reasonably priced and has been a consistent performer in my opinion. Thanks so much for watching and commenting. I hope you will subscribe to the channel.
Sir, thanks for watching and commenting. I agree. This ammo has been very reliable for me over the years. Its price point is competitive and the results are solid. Thanks for watching and commenting. I hope you will consider subscribing to the channel.
I very rarely shoot rifle ammo that I haven’t made myself, but when I do my first choice is PMC X-Tac. Some of the most accurate M855 clone loads I have found and it’s loaded pretty hot too.
Well i just baught a couple boxs of 45 acp and when i was looking at them i found 1 round that was pushed down inside the shell caseing. But i guess that could happen with almost any brand name ammo.
Sir, yes that does happen sometimes. I’ve had that happen with Winchester, federal, Anguilla to name a few. I appreciate you watching and commenting. I hope you will subscribe.
I bought these for 357 magnum the box has an advertised velocity of 1,471 fps but doesn't specify the test barrel length & with my friend's chronograph it clocked out at 1,340+ fps from my Ruger GP100 6" stainless that's still pretty good though. It also shoots high.
I have a question? How come on PMC 5.56 ammunition on the casing it looks like it says PSD? And how come it doesn't state what caliber the round is? Personally as someone who has been in the industry as long as I have I know the difference between 556 and 223 But I just couldn't figure out how come they don't name the caliber round on the end of the casing like most ammunitions do?
Thank you for your question. It’s certainly a good one. Also it’s one I don’t have the answer to. Maybe a subscriber will share the answer with both you and me. Thank you for watching and commenting. I hope you will subscribe and check out some of our other content.
@@GunsGearOnTargetTrainingLLC I had to update my comment also, since I'm home and actually looking at the back of the round. I thought it said PMD, but it actually says PSD on the end of the casing and at the bottom it has a stamp 23 which I assume it's when the round was manufactured or packaged?
@@GunsGearOnTargetTrainingLLC which I find ironic, because I shoot the 9mm Luger bronze. And back of the round, it says PMC 9mm Luger on the end of the casing?
Wow went to pmc website and was able to order 1000 rounds of 9mm did not have much of a selection but at a time like this I was happy to score 9mm ammo That i was not able to find anywhere else.
@@GunsGearOnTargetTrainingLLC I did not realize that. I bought PMC 9mm Ammo - 1000 Rounds of 115 Grain FMJ Ammunition from ammo.con I thought it was the same place. When I went to google to look up PMC it was listed under ammo.com and they sent me the ammo.
@Capo primo I bought PMC 9mm Ammo - 1000 Rounds of 115 Grain FMJ Ammunition from ammo.con I thought it was the same place. When I went to google to look up PMC it was listed under ammo.com and they sent me the ammo.
been looking to find ammo and i jumped on ammotoretail.com Email: shopgun503@gmail.com Phone: +1 7402393755 they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc You can contact them through their website below ammotoretail.com Email: shopgun503@gmail.com Phon: +1 7402393755
been looking to find ammo and i jumped on ammotoretail.com Email: shopgun503@gmail.com Phone: +1 7402393755 they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc You can contact them through their website below ammotoretail.com Email: shopgun503@gmail.com Phon: +1 7402393755
Thanks for subscribing! I think the PMC ammo is good ammo. Ive shot PMC 9mm, .380.45, .40, .223, 5.56 and it's been great. Have not shot the .44 mag but think based on my experience it should work just fine!
been looking to find ammo and i jumped on ammotoretail.com Email: shopgun503@gmail.com Phone: +1 7402393755 they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc You can contact them through their website below ammotoretail.com Email: shopgun503@gmail.com Phon: +1 7402393755
PMC ammo works well in my guns (pistol and rifle). Certainly not as dirty as the Russian rounds and more accurate than I am and functions like I paid it to. Click Bang. I use their 223 PSP in my home gun.
I'm sorry and surprised to hear that. I've shot PMC through multiple makes (models) of pistols and never had an issue. Thanks for commenting and letting people know that it might not be ideal for the P93DC. Thanks for commenting. I hope you'll subscribe to the channel.
Sir, thank you for watching and commenting. Over a two years, i think I sent over 20000 rounds of PMC in 5.56, 9mm, .38 and .375 down range. It’s been reliable, accurate and was affordable. Stay safe
@@GunsGearOnTargetTrainingLLC ammunitiondepot.com Only place I have been buying ammo online during the apocalypse. They still have some in stock. Unfortunately, they are sold with a backpack or carrying back in a bundle. Without taking the price of the bag into consideration, they were $0.64 a round
Just ordered 3 boxes of PMC 45acp 185 JHP. Right now I have my 1911 loaded with round nosed 230 gr FMJ and some Speer TMJs 230 Excited to finally get him loaded up with hollow points for the bad guy's!
It’s definitely a good defense around. You want to make sure the gun cycles with the ammunition. I’m pretty sure it will but never assume a specific type of ammunition will function in your firearm until you’ve tested it.
Sorry to hear about your wife. Been following your channel for 3 years. Glad to see you’re still making awesome shooting videos! BTW, I’ve always had good luck with PMC’s .223 & 9mm ammo. Quality ammo at a good price.
been looking to find ammo and i jumped on ammotoretail.com Email: shopgun503@gmail.com Phone: +1 7402393755 they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc You can contact them through their website below ammotoretail.com Email: shopgun503@gmail.com Phon: +1 7402393755
Wow, I my apologies. (I took your vid, as to you using PMC 5.56 & as a discussion on ar 556 pistol, because the vid showed what I looked to be an ar 556 pistol. And it was an ar9mm. My applogize. My error. I use PMC 556 in my ar pistol. Didn't compare accuracy). I'm leaving this post up to identify the error so as not to confuse readers. Just talk. How's this stuff compare at 300 yds +
MS, thank you for your comments and watching the video. Pistol ammunition at 300+ yards is irrelevant. Next, well the 556 ammunition can be shot out to 300 yards that’s really not the point of the caliber or the cartridge itself. We’re looking for precision cartridges and ammunition 5.56 or .223 is not what I’m looking for. I’ve fired tens of thousands of rounds of PMC ammunition. It’s been 100% reliable and totally acceptable for training. It works in multiple Pistol and rifle calibers. Bottom line if you prefer a different manufacture or prefer to load your own, more power to you. Thanks again for commenting and watching. Stay safe.
@@MS-oz2wu im a new shooter still doing homework, but I thought " 9mm is effective to distances beyond 50 yards though perhaps not beyond 100 yards" -google. So my guess how groups would be at 300yd (shot from a pistol) would be wide? all over the place no?
I buy pmc exclusively, the 55 grain load in both bronze and xtac 5.56 is very accurate ammo, and I’m not a reloader but the brass is evidently pretty good quality. He reloads them and more than takes care of me for some brass. The rounds do look really good coming out of the box, high shine cases always.
I agree with you. Having shot several thousand rounds of both, it's proven itself and a good value.
I never had any drama with PMC. Their .223 Remington, 9mm, and .38 special are all reliable to me. The .38 special was the best--little recoil and smooth on single action in a snub nose.
I couldn’t agree with you more. The stuff is a great value. Thanks for watching and commenting. I hope you will subscribe.
Have fired over 1500 rounds of both handgun and 223 PMC ammo in a variety of calibers both FMJ and JHP with zero issues. Great stuff at a good price.
Agree with you. Ive put several cases of 223, 5.56, 9mm and .40 S&W ammo through my guns and it's worked every time.
I have used this ammo in my 1911 for years and it's great ammo.never had a problem with it..
Agree, it's good ammo.
Yep, I've never had an issue with PMC Bronze ammo.
Me either
been looking to find ammo and i jumped on
ammotoretail.com
Email: shopgun503@gmail.com
Phone: +1 7402393755
they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc
You can contact them through their website below
ammotoretail.com
Email: shopgun503@gmail.com
Phon: +1 7402393755
@@petscare8753 Total Scam!
I have been using PMC for along time especially their rifle ammo. But 9/10mm and .357 are really good brass. Never had an issue with their ammo ever. I absolutely seek it by choice in the ar because it’s usually the most reasonable price like you said.
Hey Joe, I agree. I’ve been using PMC ammunition for a number of years and had great success with it. It’s reasonably priced and has been a consistent performer in my opinion.
Thanks so much for watching and commenting. I hope you will subscribe to the channel.
Shot it since I was a kid. The stuff they make now is my go to for cheap available fmj. Nothing but reliable out of entry level AR.
Sir, thanks for watching and commenting. I agree. This ammo has been very reliable for me over the years. Its price point is competitive and the results are solid. Thanks for watching and commenting. I hope you will consider subscribing to the channel.
Using PMC for 15 years. Good stuff when you can find it.
Agree with you. Thanks for commenting
I like their .357 158gr. jsp in my Henry lever!! Reliable and plenty powerful!
Yes sir. I love the .357 JSPs in a lever gun. Hope you'll subscribe to the channel.
I very rarely shoot rifle ammo that I haven’t made myself, but when I do my first choice is PMC X-Tac.
Some of the most accurate M855 clone loads I have found and it’s loaded pretty hot too.
I agree it's a great performer.
Yeah, both their .38 round nose and .40 FMJ are also noticeably hotter than most other common ammo in those calibers.
I just shot 200 rounds of 7.62x39 Bronze out of a CMMG AR at the range at 100 yards and is very very accurate.
I agree with you. Good ammo
had good luck with there .40 and I think it was even starline brass..?
Just got 3 boxes of pmc 55grn sp to try in my new 10.5 psa.
Yeah, I agree good ammo and a fair price. Hope you'll subscribe and check out some of our other content.
Well i just baught a couple boxs of 45 acp and when i was looking at them i found 1 round that was pushed down inside the shell caseing. But i guess that could happen with almost any brand name ammo.
Sir, yes that does happen sometimes. I’ve had that happen with Winchester, federal, Anguilla to name a few.
I appreciate you watching and commenting. I hope you will subscribe.
I bought these for 357 magnum the box has an advertised velocity of 1,471 fps but doesn't specify the test barrel length & with my friend's chronograph it clocked out at 1,340+ fps from my Ruger GP100 6" stainless that's still pretty good though. It also shoots high.
Interesting. Overall though I thinks it's good quality.
I have a question?
How come on PMC 5.56 ammunition on the casing it looks like it says PSD? And how come it doesn't state what caliber the round is?
Personally as someone who has been in the industry as long as I have I know the difference between 556 and 223
But I just couldn't figure out how come they don't name the caliber round on the end of the casing like most ammunitions do?
Thank you for your question. It’s certainly a good one. Also it’s one I don’t have the answer to. Maybe a subscriber will share the answer with both you and me.
Thank you for watching and commenting. I hope you will subscribe and check out some of our other content.
@@GunsGearOnTargetTrainingLLC I had to update my comment also, since I'm home and actually looking at the back of the round. I thought it said PMD, but it actually says PSD on the end of the casing and at the bottom it has a stamp 23 which I assume it's when the round was manufactured or packaged?
@@GunsGearOnTargetTrainingLLC which I find ironic, because I shoot the 9mm Luger bronze. And back of the round, it says PMC 9mm Luger on the end of the casing?
Wow went to pmc website and was able to order 1000 rounds of 9mm did not have much of a selection but at a time like this I was happy to score 9mm ammo That i was not able to find anywhere else.
Don't think that you bought from the PMC, most likely another dealer of theirs.
@@GunsGearOnTargetTrainingLLC I did not realize that. I bought PMC 9mm Ammo - 1000 Rounds of 115 Grain FMJ Ammunition from ammo.con I thought it was the same place. When I went to google to look up PMC it was listed under ammo.com and they sent me the ammo.
@Capo primo I bought PMC 9mm Ammo - 1000 Rounds of 115 Grain FMJ Ammunition from ammo.con I thought it was the same place. When I went to google to look up PMC it was listed under ammo.com and they sent me the ammo.
been looking to find ammo and i jumped on
ammotoretail.com
Email: shopgun503@gmail.com
Phone: +1 7402393755
they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc
You can contact them through their website below
ammotoretail.com
Email: shopgun503@gmail.com
Phon: +1 7402393755
@@petscare8753 Total scam!
Good ammo no issues for me 9mm 45acp!!
Agree with you 100%
been looking to find ammo and i jumped on
ammotoretail.com
Email: shopgun503@gmail.com
Phone: +1 7402393755
they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc
You can contact them through their website below
ammotoretail.com
Email: shopgun503@gmail.com
Phon: +1 7402393755
I'm just here cause these are the only bullets on the shelves for 9mm so I wanna see they must suck
Been shooting them for years. No better or worse than any others I've used.
You'll be very happy with PMC ammo. Quality and price
Pmc 45 acp bronze perfect 👌👌great info 🇺🇸🇺🇸🇺🇸
Agreed. Great stuff. Very consistent and reliable.
Thanks 👍
What you opinion on the pmc 44 magnum bronze ammo?? Thank you, New scriber here, great channel bud.👍🇺🇸🇺🇸
Thanks for subscribing! I think the PMC ammo is good ammo. Ive shot PMC 9mm, .380.45, .40, .223, 5.56 and it's been great. Have not shot the .44 mag but think based on my experience it should work just fine!
been looking to find ammo and i jumped on
ammotoretail.com
Email: shopgun503@gmail.com
Phone: +1 7402393755
they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc
You can contact them through their website below
ammotoretail.com
Email: shopgun503@gmail.com
Phon: +1 7402393755
@@petscare8753 Total scam!
PMC ammo works well in my guns (pistol and rifle). Certainly not as dirty as the Russian rounds and more accurate than I am and functions like I paid it to. Click Bang. I use their 223 PSP in my home gun.
I had bad luck w/ 7.62x39 but never tried the 9mm... most of the bullets were retracted into the casing .. :/
Interesting. I've not heard of that. Thanks for sharing.
PMC ammo will not run in my Ruger P93DC. Every round jams. Only ammo I've had do this. Very odd.
I'm sorry and surprised to hear that. I've shot PMC through multiple makes (models) of pistols and never had an issue. Thanks for commenting and letting people know that it might not be ideal for the P93DC. Thanks for commenting. I hope you'll subscribe to the channel.
@@GunsGearOnTargetTrainingLLC ruclips.net/video/ZEq43UdDsiE/видео.html
Been hearing bad things about PMC Bronze 357 ammo. I have no personal experience though
I’ve had no problem with the 357 round from PMC. What have you heard specifically about it?
Love reading the comments about guys putting a 1k rounds of it down range and thinking their pro critics. Those are rookie numbers kids
Sir, thank you for watching and commenting. Over a two years, i think I sent over 20000 rounds of PMC in 5.56, 9mm, .38 and .375 down range. It’s been reliable, accurate and was affordable.
Stay safe
@@GunsGearOnTargetTrainingLLC 5k a year in ammo? Damn u rich sir
Is it Brass?
Yes, brass cased and reloadable.
What does 9A or 9G mean on some ammo boxes ?
9A= 115 Grain and 9G is the 124 Grain, I believe.
Ótimo conhecimento
Obrigado senhor, espero que se inscreva e compartilhe o canal com outras pessoas.
just ordered some because it's pretty much all I can find. Hopefully it doesn't suck
I think you’ll have good success, I certainly have! Good luck. I’m curious where you found it?
@@GunsGearOnTargetTrainingLLC ammunitiondepot.com Only place I have been buying ammo online during the apocalypse. They still have some in stock. Unfortunately, they are sold with a backpack or carrying back in a bundle. Without taking the price of the bag into consideration, they were $0.64 a round
Anthony Voelker thank you. I’m glad I’m reloading the prices now are crazy!
@@GunsGearOnTargetTrainingLLC yeah, even with the crazy prices, it's still not lasting very long
Just ordered 3 boxes of PMC 45acp 185 JHP.
Right now I have my 1911 loaded with round nosed 230 gr FMJ and some Speer TMJs 230
Excited to finally get him loaded up with hollow points for the bad guy's!
It’s definitely a good defense around. You want to make sure the gun cycles with the ammunition. I’m pretty sure it will but never assume a specific type of ammunition will function in your firearm until you’ve tested it.
@@GunsGearOnTargetTrainingLLC Range Day as soon as they get in it is! I appreciate it
No longer in NH?!
Grew up in Oregon. After my wife passes away three years ago and my kids had all move west I decided I would too.
Sorry to hear about your wife. Been following your channel for 3 years. Glad to see you’re still making awesome shooting videos!
BTW, I’ve always had good luck with PMC’s .223 & 9mm ammo. Quality ammo at a good price.
Just bought a box for my 38.Price was kind of high
Price on ammo right now is insanely high. Supply and demand has an impact...
@@GunsGearOnTargetTrainingLLC not use to paying 30 dollars a box
been looking to find ammo and i jumped on
ammotoretail.com
Email: shopgun503@gmail.com
Phone: +1 7402393755
they are certified FFL dealers, they sell all possible ammunitions available including guns... fast delivery services they have 9mm, 223, 5.56, 300 blackouts etc
You can contact them through their website below
ammotoretail.com
Email: shopgun503@gmail.com
Phon: +1 7402393755
@@petscare8753 Total scam!
Kci mags are total garbage unless you change out the spring pmc is like one of the cleanest burning high quality rounds ive shot i prefer it over wwb
Thanks for commenting. I agree the PMC Ammo is exceptional
Wow, I my apologies. (I took your vid, as to you using PMC 5.56 & as a discussion on ar 556 pistol, because the vid showed what I looked to be an ar 556 pistol. And it was an ar9mm. My applogize. My error. I use PMC 556 in my ar pistol. Didn't compare accuracy). I'm leaving this post up to identify the error so as not to confuse readers.
Just talk. How's this stuff compare at 300 yds +
MS, thank you for your comments and watching the video. Pistol ammunition at 300+ yards is irrelevant. Next, well the 556 ammunition can be shot out to 300 yards that’s really not the point of the caliber or the cartridge itself. We’re looking for precision cartridges and ammunition 5.56 or .223 is not what I’m looking for.
I’ve fired tens of thousands of rounds of PMC ammunition. It’s been 100% reliable and totally acceptable for training. It works in multiple Pistol and rifle calibers. Bottom line if you prefer a different manufacture or prefer to load your own, more power to you.
Thanks again for commenting and watching. Stay safe.
@@GunsGearOnTargetTrainingLLC Oh, I see. Accuracy isn't relevant! Hmmm. Ok.
@@MS-oz2wu i think he said "pistol ammunition" - Pistol ammunition at 300+ yards is irrelevant -
@@JRyoutube09 he's talking PMC . My question is simple. How does it do out to 300 yards? What kind of groups is he getting?
@@MS-oz2wu im a new shooter still doing homework, but I thought " 9mm is effective to distances beyond 50 yards though perhaps not beyond 100 yards" -google. So my guess how groups would be at 300yd (shot from a pistol) would be wide? all over the place no?