How to make Jet engine (mini Jet engine) - How to make a simple jet engine - RC JET
HTML-код
- Опубликовано: 2 окт 2024
- With a few simple tools and a brushless motor, you can easily build a simple jet engine
t.me/creative59
By making the fan bigger and connecting a common shaft to the output fan, you can achieve better thrust.
creative596484
handmade#
handcraft#
@creative4979
#tool #creative #tools
#tools
#tool
#creative
#minitools
#tool #creative #tools
#@creative4979
#fire #jetengine #jetenge #rc #rcjets
#thrust
How to make a Jet torch 👇👇
• How to make a Jet torc...
Link to similar videos👇👇
• How to make a burner w... • How to make a small an...
• How to make Jet engine... • How to make a Jet torc...
• How to make a standing... • How to make a high tem...
• How to make a small an... • How to make a mini tor...
• Making a jet burner wi... • How to make a gas and ...
I design aircraft parts for a living, I admire your ingenuity but I have serious doubts about this as a viable 'jet' engine, you lack a suitable combustion chamber, your fan tolerances and clearances not to mention balance is way off also to get the fine balance of flow to rpm to air would take days, not first try. I think what you have is a burner if it is actually producing thrust and it's not some trickery then its from the gas expanding and exhausting which is impressive but not quite a working turbojet engine.
Do you have suggestions on how to make a correct one
Yes that's right
This engine works like a jet engine, not exactly like a jet
@xavierbbgiannakopoulos8987 You need to machine centrifugal blades or blade rings and they need to be very finely balanced, or you can use the blades and shaft from automotive turbo's - your main shaft needs to run on ceramic high speed bearings and be balanced, your combustion chamber is ok but you need to calculate the volume and number of holes and there can't be any weak points and you should taper the inlet and exaust to the exact volume/dimensions based on the calculations and then you need reliable timed spark - not to mention very precise fuel management and introduction - this is why jet engines are so expensive and hard to manufacture - even on a perfectly balanced, structurally sound and measured engine to get the exact right fuel to air ratios and flow will take many tries but others have done it, look it up on youtube but don't fall for claims (like this one) of true DIY jet engines, a true axial thrust producing jet engine is a fine piece of machinery not something that can be bashed together - you could look into pulsejets - look up rocket man on YT, much easier but still a pain to get to work correctly, there are no shortcuts to making a true jet engine.
@creative4979 it doesn't work like a jet engine, it is a burner
@flymachine thanks for the answer, i'm learnig the basis for building physics based rc airplanes and I would like to start building some engines, these informations are really helpful, thanks a lot!
How do i make it remote contolled?
Nichhe motar laga hei
Hi, where's the fan-making video? Coudln't locate it..
How to make a Jet torch 👇👇
ruclips.net/video/1EXRN2urQ4E/видео.html
Please tell me what that butane regulator is 🙏
Found something similar it's called butane refill connector adapter valve
@@thelazypotato7817 YES, THANK YOU
🫡🫡🫡🫡🫡
I want to know what made it accelerate at the end
Just a motor
@@JLSLights do you not know how jets work
Please, tell how its butan gas regulator names
It does not have a regulator
It has only one fuel control valve
Ap kahan rahte ho
Sir i want to buy this
whats the measurement of the small yellow pipe you place into the 25mm diameter pipe?
1mm/2mm
😮😮😮👏👏👏🙏🙏🙏