How to make a small and sharp torch-How to make mini gas-get metal _ Mini Cutter
HTML-код
- Опубликовано: 30 сен 2024
- Make a very strong and small cutting torch with a few broken lighters
.
.
t.me/creative59
creative596484
handmade#
handcraft#
#torch
#get
#fire
#tool #creative #tools
#tools
#burnout
#tool
#creative
#minitools
#tool #creative #tools
@creative4979
#@creative4979
#creative
#torch #cute #cat #soldering #welding #cutting #cutter #fire #minitools #tools
Link to similar videos👇👇
• How to make a burner w... • How to make a small an...
• How to make Jet engine... • How to make a Jet torc...
• How to make a standing... • How to make a high tem...
• How to make a small an... • How to make a mini tor...
• Making a jet burner wi... • How to make a gas and ...
• How to make a standing...
You gotta love RUclips. Gun channels get suspensions, and possible deletion for doing videos that break guidelines. Videos like this that show you how to make a grenade, guaranteed to kill the user is ok. WTF! 😂😂😂😂😂
Restoration Old Motor Submersible Pumps -- Restoration Old Burned Electric Motor
ruclips.net/video/j61oL2024Mc/видео.html
Please do not attempt to build the torch, I breaks every safety regulation I can think of and there not expensive to buy new. By the time youve got all the parts and time included it much the best idea.
Be careful I work in the metal industry and often use cutting torches risk of flashback is very high.
I don't know nothing. Having said that, is there a way to prevent that?
I came here in a serie of "DIY hidrogen gas from water" videos and wich they said that to prevent the flashback a guy put ciggarette filters in the pipe, another guy put glass fiber; and another guy put (i think) like... ...(don't know how to say it, i'm from Argentina)... the metal shaving for wash the dishes.
Also in all those diy hydrogen they use a second mini vessel with water and air between the hydrogen production and the blowtorch. Could it be implemented in this kind of proyect?
Are these workarounds effective?
It’s missing a flash back arrestor, you’ve built yourself a bomb! 🤯💣☠️⚰️
does FUEL burn/explode without oxygen in canister?
@@AT-os6nb it wouldn’t explode/burn without oxygen, but if the flame goes back down the pipe taking oxygen with it then problems will occur
@@paulfrost8952exatly!!
especially with an unstable gas like a can of butane 😅
Acho que não precisa de anti- retorno de chama. Não existe oxigênio sob pressão. O oxigênio é do ar que é arrastado pelo fluxo de gás. Se não tiver fluxo de gás, não tem arraste de oxigênio. I arraste só ocorre de dentro para fora. Quando a pressão dentro da garrafa cair a ponto de igualar a atmosférica, o fluxo parará e o ar parará de ser arrastado. Nunca haverá inversão de fluxo.
Pas de sécurité. Au moins un clapet anti retour sur le tuyau du gaz
please please stop using this , very dangerous No Flashback Arrestor .. Please be careful
MDR j'en fait autant avec un briquet géant je vois pas l'int^e🤔🤔🤔🤔🤔🤔🤔🤔ret là ?????? franchement
Crap
If you don't want to give measurements and equipment, then you better not post anything..
Or just buy a torch for $20 holy smokes.
What a waste of time and materials.
good idea but you need a gas bubbbler so no back explosion when gas runs low
You must be in Stone Age to waste your time to rig this that might cause you 2nd degree burns 😂😂😂
How do you shut off quickly the can of gas if it has a leak and flames are coming from it. 🤣🤣🤣turn that wooden knob . Oh so funny.😂
He didn't make anything, he just repurposed things already made
A home made bomb to be sure
This gentleman MUST be Russian. If not, I apologise. Although it is very interesting, I have concerns over its safety. Commercial torches have flashback arrestors, which do not allow the flame to travel down the tube and into the gas bottle. I did not see such a device on this. If I have missed seeing such a device on this tool, then I must apologise once again. If it is safe then it will be most useful to jewellers so that they can "weld" jump rings, such that closed link chains can be made. Please carry on making these "unusual" items, stay safe so that we can enjoy your work for many years. 👍
Гасители обратного воспламенения ставятся на водородные горелки, пропан в трубке не воспламеняется
Был бы русский, то болт и спицу приварил бы к баллону 😁
Nobody cares what you have to say
He's Russian,Nicaraguan or Cuban.
Flashback arresters are normally only used where there is an oxygen supply, as there is no oxygen supply that’s why he did not fit one. But considering a jewellers butane torch can be bought for about $40 I would buy one of those and know I was safe.
Just buy a bernzomatic brazing torch??
Nice..... can't wait to see the show when you have a back flash happen!!!! (btw, anyone watching this don't make one like this guy did! There is no safety feature stopping this setup from back flashing, then..... Boom goes the dynamite all up in your face!)
Absolutely, this is not a safe tool. I've used a variety of torches over many years and I would never use something like this.
Amazing! Changing the gas canister must be fun😅
very good and I need time to watch it properly. But can youtube posters pass this message around - to make the sound consistant. I hate it when I have the thing turned up to hear in background - but then the sound is suddenly blasted. It makes me feel like an idiot who is not in control of his environment. When its the idiots on the other side not keeping their volume at a set level. And youtube ought to make everyones volume the same level by default.
No flashback arrestor, don't do this at home, or at least be aware that you may explode yourself.
Because everybody has an old torch lighter and micro tubing laying around
buy a pencil torch GAWD
Work with propane
The washer must be grade 8 or this whole thing will not work!
The music kept me from wanting to watch the video. Best of luck to your channel.
So far so good, still waiting for the "metal _ Mini Cutter" part: There is nothing wrong with the project as it is, but I guess click baiting must have become a habit by now.
良いアイデアと簡単な方法、サポートします
Excellent video ! 👍
Nice work, just a little disappointed when it came to the metal cutting part. If you can actually achieve that, maybe you would really have something there.
Disculpe el error ortográfico quise decir no aproximar la pistola cerca de la pipeta de gas a la candela
*(so am I allowed to say "hairiest knuckles award winner"???)
*Just don't bring that ((BULL$#!+)) down here to Oklahoma or the Ozarks/JUUUUUST SAYIN'....
Bekar hai kuch kaam he niye karah 😂
The principal,I'm ok with it. But the way he did it,it's just too dangerous
Muy bonito pero me da miedo cometer un error y probocar un accidente
WTF this costs nearly nothing to just buy
hello is it possible to have a flashback?
Delhi Government has errected 500 High Mast Indian Tricolour Flags in & around Delhi.
It it patriotism or some scam doing so ???
That will not cut through anything!
Still confused 🤔exactly what I would like to have thow
I tried it making when I was 15 but I was making burner also but failed due to making smaller holes to pass the gas hole was 0.70mm so gas coming out was not so brilliant, today when I saw it it reminded me of my memories....
Great job but still needs more improvement....
It's not the rugged one....
😂 лёгких путей не ищем 😂а не проще взять пропановую горелку обрезать у неё сопло а оставшуюся трубку натянуть шланг и она будет регулироваться за счёт вентиля подача газа а не как у вас палками и щепками 😂
I didn't get any of the allahuakbar notices before commenting but I am pretty sure you can get small torches that hook up to proper propane/butane tanks for around 20-30€!
Everything except explaining the most important part, the burner head, where did that come from??
No tiene mucho sentido esto...habiendo a la venta mecheros de repostería...no hay nada que impida un retroceso en la llama que provoque un desenlace fatal que pueda quemar los globos oculares del que lo hace...
I tried using a lighter. But it didn't work. What am I missing?
That's cool, and for all of the effort, you get about 10 minutes of burn time, LOL !
Mr. Kahoy
Very dangerous invention brother it's not a safe and also useless only we can use it for solding but its may be burn or blast if by mistake anyone touch that fire to its pipe make it more safe with guage that sharp that flame for cutting matel thanks for idea 😊
Cool video, everybody crying in the comments about safety are just children, I have done waaay more dangerous stuff than drill a hole in a piece of wood im holding and still have all my fingers and toes
mmmmmmmm use a ready made blow torch to light a dodgy home made blow torch. I think I'll just buy one!!!!
Me cansé mirando el vídeo , mejor compro una pipeta pequeña de soldadura de neveras
Watched the production for about
twenty minutes. Didnt see anything I would trust..
To complete this project the tip of those useless rechargeable pencil torches found at discount stores and flea markets will do I guess.
aw mate this is awesome thanks for showing me how i can blow myself up but seriously i am quite surprised by this lokks hot enough anyway
De tanto que ele pediu para eu me inscrever no canal dele que eu acabei me inscrevi mesmo 😂😅
I think I could buy one faster and easier.
thanks
I can't just NOT touch this... so... why not just use the lighter that you used to light your new make work project torch...since.. they both run.. on you know.. butane?😅
Haha, pulls out mini blowtorch he bought off wish to. Light it.
flash arrestors are generally used with oxygen torches, this is no different than the tip that i can buy from the hardware store, or a tiger torch, why dont those have arrestors? im sure if they were that dangerous they wouldn't be sold.
As with all of these kinds of vids, can someone please explain why I would invest so much time, effort and anxiety into doing this when for about $15 (probably about the cost of the materials you used if you didn't have most of them laying around....) you can buy a torch that probably leaks less, is hotter, more controllable and is considerably less likely to accidentally burn your spheres off?
I mean its cool you can do this with improvisted materials and such, ... but how much time did you take in trial and error on technique and particulars before getting it right? .... Come the zombie apocalypse I suppose it might get you by an incident if you had to desparately McGyver your way through something ... but the odds overall of being dead before you get there makes the practice of *this* particular (likewise most similar for small tools ... that you will probably be able to scrounge anyway) seems in my calculation to make the exercise pointless.
(Ok showing younglings that it *can* be done has something going for it in showing that the commercial products aren't magic but just refinements of what *can* be done by any reasonably skilled tool-user is perhaps worthwhile .... but those ever likely to be able to pull this off if it were ever desperately needed already knew that, almost by definition.)
These are normal for DIY hobbyists, they build everything it's kind of the point.
When you don't have $15 dollars, you do with what you have. Many people in the world don't have the financial resources to buy tools.
@@BigBlueMotors The likelihood of having all the parts you need to build this(and most other YT build it yourself smaller tools) just lying around without having to buy something (or more likely *things*) that will be close to the cost of a small torch anyway are small. Theres some cost benefit in that you'd wind up with excess materials that *might* be usable for other things, ... but unless you have *huge* storage space and lots of (expensive!) organizing bins storing all of what you *might* someday use is a losing proposition. I've found this out the hard way in a 20x25 garage plus an electronics bench in the basement. There's just no way to usably save
*everything* that might be useful. So it's theoretically possible that you *might* have scroungables to do this but 99% of the time, other than for giggles or possibly teaching a youngster something about how things work it's very much a "what's the point".
There's also the problem of consumables when you use scrounged. Sure you might scrounge the propane, once. ... but comes time to replace it, you're going to spend almost the cost of a torch buying a new bottle. And if you do scrounge one, is the same fitting going to be usable your will you need to improvise a new one? It's the whole issue with DIY ... replaceability. I buy a product and there are going to be replacement parts either OEM or after-market. Something built scrounge and scratch... and a part breaks or wears out ... well you might not be able to scrounge exactly the same, and may wind up having to rebuild all or part of your project. That gets exponentially more expensive in time as the number of must-have-every-day tools you've DIY'd goes up.
Seems like a neat fun project. Don't know if you have limited access to tools or what but here in the states they make small butane torches for as low as 5 bucks.
As others said PLEASE be careful... a tip over COULD go very bad.. not saying it will... just saying.
Neat little project though!
It's almost 3rd grade art class with a touch of freshman High School Shop class
a lot of time and parts just to make a torch cost more than buying hobby torch new and when gas runs out you have to start all over again complete waste of space sorry for reality check
What a waist of time couple €/£ 2 or 3 buy one ready to screw on gas FFS
سلام اون لوله مسی رو از کجا میشه گرفت؟
Did I just watch for 15 min to see him light his butane torch with his other butane torch.
Thinking quickly, Dave crafted a butane torch from copper tube, wood, glue, and a butane torch!
Indeed. The only benefit here is flexible head & low profile for tight reaches
Lebih irit gas untuk pematrian logam 👍👍👍👍👍
Да, круто!!! Сварганить из ничего вполне рабочий инструмент!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺
Can u please make a hydrogen cell for the torch
A bit dangerous! It’s better to buy a mini torch!
Looks dangerous. That bottle needs some type of stabilizer.
And when the cans empty you have throw the lot away
Creative and handy, but there are ready made long nosed flame gadgets available without hustle and risk of bursting fire. In fact, there are so many propane attachments and bits available online that could make a fantastic yet safe project like a breeze. All in all, great job for something to demonstrate as doable.
"How to blow up a butane canister and put yourself in the hospital"
I would have the can upside down. When you fill up a lighter you hold the can upside down as it is fluid.
Just drill the ####ing holes and stop pointing and messing about!
How long does that tin last lol
I'm making one 😂
How hot does the pipe get 👍
What type of torch tip u r using u didn't say anything about it my friend ?
Errrrr .so r we supposed to just GUESS what stuff u use & sizes of the holes ???
Minutos de mi vida desperdiciados viendo un vídeo de algo que ni siquiera necesito
I never liked silent films wish you could talk a little
whats a car sprinkler pipe? coupling and @ cycle hoe?
Надо было через китайскую минигазовую плитку заморочиться. Там хоть регулировка подачи газа есть.
Тут тоже есть. Крути гайку. Не понимаю предназначение данного института. Не подскажите?
SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER
Что за мега клей??
Используйте другой клей
I couldn't help feeling like I was looking over the shoulder of a bomb maker.
самое больше мне понравился коммен этого, который написал: он наверно русский!!!
Когда есть такая в арсенале - это неплохо👍
It's not rocket science blah blah blah baby baby toys timepass
How about melting metal wires to fuse metal plates with concentrated solar ray from the Sun?!!
This is one of the most dangerous creation ever seen on RUclips!
to kheyli ba hushi pesar atishemon nazani ba smal tochet 😅
So what would be the purpose for this little torch? I mean, what would you use it for?
Litterly hundreds useful things.
Like It may be 100% required in manufacturing and repair of Jewelry, soldering, shrinking heat shrink tubing. So many in fact I'm having trouble thinking about it.
Instead of glue holding the mechanism on the gas can why not use pipe clamps. Just a thought.
Can use it for brazing copper or cannot...
Health and Safety completely ignored.
im sure he has flash back valves on it .... pretty sure ... looks safe to me and im osha certi.