There seems to be 3 different positions, A which is ax80033 no.2 which the instructions tell you to use and B and C which have more holes that A. I guess this would be to allow for more oil to pass thru when compressed, so a faster compression rate?
I should mention that it's always a good idea to pre-lube/grease your O-rings before assembly an put a dab on the threaded end of the shock shaft to prevent the threads from chewing at the O-rings during assembly.
Excellent Video, Thank You! I am building my Raw Builders Kit watching your videos for tips. You don't use Associated Green Slime or other product for shock cartridges? 😁 Waiting on my steel axle tubes from GoolRC.
Too bad this kit does not come with everything you're showing us in this video. All those o rings and what not need to be bought separately from the rest of the pack. You're great at teaching but for this video with the shocks, nothing seemed correct for mine Sorry
Buy stock in SSD rod ends. 😂 but it is a good break point. At some point...something’s gotta give. I had SSD ones and only broke one end. Are you doing a lot of flips?
CCxRC No big jumps I crashed and hit a tree lightly and one broke. I fixed it and took it out again did a small jump and then the other side went. I’m gonna sell them and get the vanquish ones.
Thanks for doing this! I was NOT doing well going by the book! Not...at ...all!
Glad it was helpful!
Wish I had checked this before I built my shocks 😂
yup the shocks are the only part i didnt build when i bought ,my second smt which was the kit version
There seems to be 3 different positions, A which is ax80033 no.2 which the instructions tell you to use and B and C which have more holes that A. I guess this would be to allow for more oil to pass thru when compressed, so a faster compression rate?
That’s what I’ve been thinking putting mine together.
I should mention that it's always a good idea to pre-lube/grease your O-rings before assembly an put a dab on the threaded end of the shock shaft to prevent the threads from chewing at the O-rings during assembly.
Excellent Video, Thank You! I am building my Raw Builders Kit watching your videos for tips. You don't use Associated Green Slime or other product for shock cartridges?
😁 Waiting on my steel axle tubes from GoolRC.
Need to get an aluminum shock tool. They have pivot ball clamps built into them as well.
nice video and tips
😂 the infamous “D Bag” lol... 💪🏾💯🚀🔥
D bag is a D bag. But at least the D bag comes with alluminum bodies lol.
The camera was really blurry I couldn’t see which goes in order and I agree instructions are horrible for people who are not familiar with rcs
Too bad this kit does not come with everything you're showing us in this video. All those o rings and what not need to be bought separately from the rest of the pack. You're great at teaching but for this video with the shocks, nothing seemed correct for mine
Sorry
How long are those shocks compared to the bomber shocks?
I decided to go with ssd trailing arms and the rod ends break easily. Any recommendations/help?
Buy stock in SSD rod ends. 😂 but it is a good break point. At some point...something’s gotta give. I had SSD ones and only broke one end. Are you doing a lot of flips?
CCxRC No big jumps I crashed and hit a tree lightly and one broke. I fixed it and took it out again did a small jump and then the other side went. I’m gonna sell them and get the vanquish ones.
That title though GUY 😂🤪🤣