I guess the conundrum you face is warrantying back the same potential problem. Can you warranty into or get the ratcheting handle from the 133 piece set it has the magnetic tip at least, but a bit bigger style unit though.
@@pablosgarage707 So not sure if your dealer will allow a warranty style swap pay the difference deal approx $36 upshift to the SBDR8 screw driver. Then need a ¼ to 1/8 adaptor as well. So overall not sure if that set up will be suitable if it’s too bulky as I don’t do rc work myself. just putting ideas out there.
If you put your finger over the ball lock When you insert the bit, it won't come out. It's also because the bits aren't ground where the ball socket should sit.
Pablo have you seen proto tools of these sets? Same cases, bits and ratchet driver? I'm like huh. Look online for proto multi bit set Like your videos! Keep it up! Fan over here from Bakersfield CA! I do small engine work like generators and lawnmowers
I do. I should check it out. I ended up buying four bit drivers from the local hobby shop. They work pretty good and they cover all the sizes I need for these RC cars.
The problem I have with bit sets or bit sockets is that why would you buy anything other than RBRT, Grip Edge RPT etc now ? They completely outperform standard.
I guess the conundrum you face is warrantying back the same potential problem.
Can you warranty into or get the ratcheting handle from the 133 piece set it has the magnetic tip at least, but a bit bigger style unit though.
Right. my coworker has a different set. It works good but it is expensive. I think it’s around $240.
@@pablosgarage707 So not sure if your dealer will allow a warranty style swap pay the difference deal approx $36 upshift to the SBDR8 screw driver. Then need a ¼ to 1/8 adaptor as well. So overall not sure if that set up will be suitable if it’s too bulky as I don’t do rc work myself. just putting ideas out there.
Justin is punching the air right now he ain't showing up next week 😂😂
Lol it’s all good. He came by yesterday. I unfortunately forgot this set at home. 😂
If you put your finger over the ball lock When you insert the bit, it won't come out. It's also because the bits aren't ground where the ball socket should sit.
Pablo have you seen proto tools of these sets? Same cases, bits and ratchet driver? I'm like huh. Look online for proto multi bit set
Like your videos! Keep it up! Fan over here from Bakersfield CA! I do small engine work like generators and lawnmowers
You should make a video of you driving your RC trucks around a track.
Definitely that would be awesome. I have tried in the past however it was a little hard to get that right angles, but I will definitely do it again.
Nice
It's the set as the proto one a d the proto is about 100 bucks too and has same warranty too...
👍
That was fast 7 day's nice better than 21 take that driver back have your Mac man warranty it out. on to the next one thanks Pablo 👍😎👍
I agree! Stay tuned for more videos. Thank you for the support!
You should go with the bit set ifix it if you have best buy store around you
I do. I should check it out. I ended up buying four bit drivers from the local hobby shop. They work pretty good and they cover all the sizes I need for these RC cars.
The problem I have with bit sets or bit sockets is that why would you buy anything other than RBRT, Grip Edge RPT etc now ? They completely outperform standard.
I agree. I bought this set last year I really was not informed on the grip edge and Rbrt sets. Oh well definitely something I should buy eventually.
21 Day's wake me up 👍😎👍
I want that set lol
Really. I wouldn’t get it lol. Much better sets out there.
@@pablosgarage707it's handy !
21 days?
I’ll have it out earlier just a placeholder for now 👍
@@pablosgarage707 no worries Pablo just being funny 🤦🏻♂️
A lot of Mac stuff is cheap quality.. some is good but most is cheap