In this video learn how to calculate glass pane dimensions to make a new Aquarium. Whatever the thickness of glass. Use this method to know the dimensions you need to make an aquarium.
Very nice sir... The calculation you show is very very helpful... Thank you... Pls also make some video on top cover of aquarium with exact calculation...
Luckily I am looking for the exact dimensions, I don't need to calculate. Thank you so much. Can also recommend the type or brand of glue that we can use?
Great Information Sharma Ji, appreciated, am keep watching you maximum video that helps lot for beginners. Query: what is the need of *BASE BAR*, why this is necessary? any special advantages for this, please explain.
Lovely video....I am making a 3’ W x 2’ H x 20” D in 12 mm glass.... I have cut the right and left glass 1” less considering 24 mm of the front and back glass... As you said there should be 2mm extra for silicone... Will it create any problem if the side glass panels are less 24mm or should I get them sanded 2 mm more so it will be 26mm.... Would appreciate your help
Hi! Thanks a lot for the exact calculation of side glass and the bracings. I will be making the aquarium for the first time so can u please tell me where exactly are these bracing placed in the tank?
Hi Bro, Thank you very much for detailed presentation and calculation. This is exactly what I was looking for. I am so happy and satisfied with the measurements. Just wanted to double check with you before I start fixing the tank. As per your presentation in #179, you used 4 short Ribs and 2 long Ribs 24". However her in this video you have given 4 long Ribs 35".25' by 2" and 2 short Ribs 14".25' Can you please advise how and where would you wish to fix the long Ribs?? Is it inside bottom and top 34".25' by 2" ?? Please advise. Or is it like as per the tank shown in #158?
The tank was quite long so I install more long rips i.e. 2 in upper frame and 2 inside the tank at bottom. Simple rule is to make tank more stronger. If tank is long then use more long rips and if tank is small then use more smaller rips
Thank you for this video. Just to make sure, do you subtract 2mm on each side of the side panel for silicone in other words 4mm in total per side panel shorter or 1mm on each side making it a total of 2mm shorter?
Hello sir I’m trying to make 1ft or 12 inch cube tank for the first time myself with 5mm glass can u please help me how much front,back & size should i cut in details.
Sir your drawing calculation helps us a lot. I want to make 4 feet tank. 4(length)×2(height)×1.5(depth) . is this size looking good?? 1)which glass thickness will be best? 2)what will be the side mesurement of the glass? 3) and all rip sizes . Please help me..🙏🙏
Hello Sir, for 72 inch length, 17 inch width & 30 inch height, I have used 12 mm ultra clear glass... This is not toughened glass... Per ur calculation I guess the thickness which I have used is not sufficient... Can I do something to strengthen my aquarium???
I want to build a 6 feet by 2 feet by 2 feet tank which method i should use ? for example side panel on top and front back attached by the side of the base or method two like u did.
Sir I want to make one customized tank of Length 3feet Breath 1.8 feet Height 2 feet Sir so I want to know ki 1. what will the dimensions of the glasses? 2. Is support required for both on bottom and top. 3. What will be the approx costing with ultra clear glass. 4. What is the difference between ultra clear glass and regular glass Pls help
i had customize tank 3 feet length x 2 feet height and 22 cm wide in 8 mm glass and it leaked twice is there any calculation on design of tank to hold water capacity
Very good video. I want to make 3ft * 1'5ft * 2 ft (height) aquarium in 10 mm glass. Could you please tell me what will be the each glass size that i have to arrange?
Hi sir can i joined 2 acrylic sheets as bottom base for my 5 feet tank [5 feet length × 1feet width × 1.5 height ] is there any water leaking problem if i joined 2 acrylic sheets as bottom base sir.please help me sir.
I'm Going to make 5 feet aquarium.inspired by your diy videos. Professionally I'm a lecturer but I'm trying to make aquarium by watching your videos sir.🙏🙏🙏 I'm making 5 feet acrylic aquarium with 10mm thickness sir
Please, I do not understand Hindi.. My question is, how much do I charge for the side panel after deducting the thickness of the glass? How many mm to put the silicone material... Greetings
length = 24 inch width = 12 inch height = 15 inch glass thickness = 6 mm Vai mene apka full video 3 ber full dekha hu ferbi glass dimension nehi nikal para huu please tell me what is the dimension in 2 side
bro some people dont put all the sides on top of the base, they put the front and back on the side and only the tank sides on the top of the base. whats the difference ? can you pleae explain?thanks
Sir bahut hi aacha lagaa aap ka video Par glass shop wale Itna perfect nahi cutting karte hai Maine apne aquarium ka front glass change kiya tha glass sahi cut Nahi kiya tha shop wale ne
Sir plz jb aap itna acha explain krte ho, to background music mat rakha kro. Plz.. this is my suggestion.. baki aap pr nirbhar he.. anyways I always like your videos and watch till end. Thank you.
Muzhe 5 ft x 2 ft x 2 ft ki aquarium banana hey. ..15 mm glass se. Bottom ke side side pe front back side glass lagau ? Jese ADA aquarium hota hey. Ya front back bottom ke bahar lagau aur side panel dono bottom ke upar lagau ? Please send me the dimensions for glass cutting
@@AquaTechInfo and in Bangalore Mayur Aquscaper making front and back on side of bottom and right-left glass on the top of bottom but inside of front and back
For making 5x2x2 feet aquarium with 12 mm glass, if the following reading are correct? Base, Front and Back glass- 60"x24" Side glass- 24"x23" Bracing long- 59"x2" Bracing short- 23"x2" Sir mei confused hoo gaya hu K- A) 23" ya fir 22"24mm lu? B) 59" ya fir 58"24mm lu? Ku k aap bole the k 1 mm silicon k liya lagta hai.. Thora guide kar dijiya sir..
Sir actually I want to say which of the following dimension is correct between model 1 and model 2? Model 1- Base, Front and Back glass- 60"x24" Side glass- 24"x23" Bracing long- 59"x2" Bracing short- 23"x2" Model 2- Base, Front and Back glass- 60"x24" Side glass- 24"x22"24mm Bracing long- 58"24mmx2" Bracing short- 22"24mmx2"
Hi sir … I have cut the glass with same specifications but some where I feel insecure because of the height is 24inch and breadth only 15 inches .. Is this safe … with bracings?? or shall I reduce the height ?
Sharma ji I am planning for 3 feet X 1.5 feet X 1.5 feet glass fish tank with normal plain glass with 10 mm glass thickness instead of 8 mm as suggested by aquatools for a safety factor of 3.8. For 10 mm thickness do I need bottom and side brace bars. Please suggest. I wish to avoid them hence I increased the thickness by 2 mm. Will this suffice. Thanks Rajiv
@@AquaTechInfo thank you so much. Just one more query. To be more safe with 10 mm glass how many braces you think (top, bottom, sides) you think is required to be better safe than sorry. Please advice. Thanks
There some problem with your side dimensions. If you are shortening thr side glasses width? Then how are you placing the side glasses? Above the bottom or around the bottom glass! Your calculations for sides have some errors.
I saw atleast 10 video on aqurium tank making... But no one explained like you did boss... Thanks
Sir Kar like melega
Excellent video. Nicely explained.👍 Just the height of the side glass should be minus 8 mm since this glass would be on top of base glass.
I kept all sides on the top of base glass
Bahut hi badiya samjaya hai bhai ek bar mai samaj aagya 👍👍👍👍👍
100% accurate calculation. Thanks for shared.
thank for your Very Detailed explaination even i dont understand your language .. but i can understand by your demo.. unlike other only installation
Where are you from?
Thanks for informative video.. it helps me
Helpful
Bahut achi tahra samjhya thanks bhai.
Very nice sir... The calculation you show is very very helpful... Thank you... Pls also make some video on top cover of aquarium with exact calculation...
Excellent. Very good way of explanation
Luckily I am looking for the exact dimensions, I don't need to calculate. Thank you so much. Can also recommend the type or brand of glue that we can use?
Nice information... thank you for sharing.... this information helpful for me
Thanks a lot buddy for such a good info 👍🏻❤️
Thank You very much sir.. Nice information. Do we need to keep the front,back, side glasses on top of bottom glass or around the bottom?
On top of base glass
Very Informative....
Great Information Sharma Ji, appreciated, am keep watching you maximum video that helps lot for beginners.
Query: what is the need of *BASE BAR*, why this is necessary? any special advantages for this, please explain.
Sir, thanks for appriciation. Brace bar is the support system for aquarium. It provide extra strength to tank
Great
Thanks to give information 🥰
Lovely video....I am making a 3’ W x 2’ H x 20” D in 12 mm glass....
I have cut the right and left glass 1” less considering 24 mm of the front and back glass...
As you said there should be 2mm extra for silicone...
Will it create any problem if the side glass panels are less 24mm or should I get them sanded 2 mm more so it will be 26mm....
Would appreciate your help
Use as it is. But use supports for better gripping of sides
*Nice information shared Sharma ji but he background music is overpowering your Voice*
Great man thanks
Very good video
Hi! Thanks a lot for the exact calculation of side glass and the bracings.
I will be making the aquarium for the first time so can u please tell me where exactly are these bracing placed in the tank?
Video no 179
@@AquaTechInfo Thanks watched
Valuable information
Sir ji your tank size Finally is 36" x 15" but height 24" + 8mm (GLASS THICKNESS) increase all size in height and Thanks for Informative video
Sir 6mm par nahi ho ga 33"x15"x24" on 6 mm
Thanks bro very informative
Nicely explain sir g please 5 feet tank k leye bhi eak video ho jaye calculations k sath
Full dimensions please?
Thank you. brother.
Good information shared by you to keep up the accuracy on making of aquarium.
thank u sir..
Bhaiya 2feet aquarium me side ka left and rite ka glass 1feet me 10mm kam rakhana hoga na
Hi Bro, Thank you very much for detailed presentation and calculation. This is exactly what I was looking for. I am so happy and satisfied with the measurements. Just wanted to double check with you before I start fixing the tank. As per your presentation in #179, you used 4 short Ribs and 2 long Ribs 24". However her in this video you have given 4 long Ribs 35".25' by 2" and 2 short Ribs 14".25' Can you please advise how and where would you wish to fix the long Ribs?? Is it inside bottom and top 34".25' by 2" ?? Please advise. Or is it like as per the tank shown in #158?
The tank was quite long so I install more long rips i.e. 2 in upper frame and 2 inside the tank at bottom. Simple rule is to make tank more stronger. If tank is long then use more long rips and if tank is small then use more smaller rips
@@AquaTechInfo Thank you Sharmaji for your information and valuable guidance. I have completed my tank. Thanks a lot.
I hope I could send you the pictures of the Tank. 😇😇
Bro ye kitne feet k h
Perfect......
Thanqu sooo much sir
Thank you for this video. Just to make sure, do you subtract 2mm on each side of the side panel for silicone in other words 4mm in total per side panel shorter or 1mm on each side making it a total of 2mm shorter?
1 mm on each side and overall is 2 mm
@@AquaTechInfo thank you. I appreciate it.
🙏
Well describes. Can i used 6mm glass for 24*12* aquarium.
Height?
Very good👍
Thank you! Cheers!
Sir g need ur help in correct dimensions for
4 feet length
3 feet hight
1.6 inch breath
Glass 12mm
Including with top & bottom supporter..
1 feet. 6 inch in breath for breath
Breath or width?
Hello sir I’m trying to make 1ft or 12 inch cube tank for the first time myself with 5mm glass can u please help me how much front,back & size should i cut in details.
Have you made your tank?
My tank im looking to make is 6ftx2ftx2ft using 10mm laminated glass and braces would this be ok?
What do you mean by laminated glass?
Thanks bro
Sir your drawing calculation helps us a lot. I want to make 4 feet tank.
4(length)×2(height)×1.5(depth) . is this size looking good??
1)which glass thickness will be best?
2)what will be the side mesurement of the glass?
3) and all rip sizes .
Please help me..🙏🙏
Sir Ji RIP long & short mein apne jo 2" inch liya hai woh kya hai?? 2" inch wala funda nhi samjha sirf baak sab well explained thank you so much
Glass supports
How much mm glass required for 4ft length 2ft height and 2ft breath and what are dimesion of glass to be cut for this
12
❤❤❤❤
Aquarium me konsa glass use hota hey uska naam bata doh sir please .
Plain glass yaa toughend glass...... please reply sir.......
Both can be used. It's up to hobbyists
@@AquaTechInfo thanks for reply sir 😇😇😇😇😇
Is 1 mm gap is enough for the silicone to settle… any contractions or expansion in weather changes..?
Yes it's ok
Hello Sir, for 72 inch length, 17 inch width & 30 inch height, I have used 12 mm ultra clear glass... This is not toughened glass... Per ur calculation I guess the thickness which I have used is not sufficient... Can I do something to strengthen my aquarium???
Thickness is sufficient. Just use brace bars supports for extra safety
@@AquaTechInfo - Thx brother for confirmation... I really appreciate your help!
I want to build a 6 feet by 2 feet by 2 feet tank which method i should use ? for example side panel on top and front back attached by the side of the base or method two like u did.
Place all sides on the base
Sir I want to make one customized tank of
Length 3feet
Breath 1.8 feet
Height 2 feet
Sir so I want to know ki
1. what will the dimensions of the glasses?
2. Is support required for both on bottom and top.
3. What will be the approx costing with ultra clear glass.
4. What is the difference between ultra clear glass and regular glass
Pls help
Small rip andar lagegi to 2inch vo kha jayegi to jab long wali andar lagayenge to usme 2+2 =4 inch kam krna padega na sir. 35.25 kese hua
From where you are subtracting 2". Total length of rip is 36"minus 8mm (thickness of glass) minus 8 mm minus 2 mm (for silicon layer)
RIps ko lekar main claer nehi hu...upar se dekhne par tow 4 side k 4 rips dikhte hai har aquarium mein..lekin yeh lower rips kaha lagegi?
i had customize tank 3 feet length x 2 feet height and 22 cm wide in 8 mm glass and it leaked twice is there any calculation on design of tank to hold water capacity
Can you WhatsApp video on 9417632847?
sir Agr chhooti rips bahir lagani hain to theek hai .agr chhooti rips ander lagani hain to bari rips 36" se 34mm kam karna hon gi.
Why
Bhai paise calculation bhi bata do agar glass ki price 60rs sqft hai tho kitna kharcha aayega ???
Very good video. I want to make 3ft * 1'5ft * 2 ft (height) aquarium in 10 mm glass. Could you please tell me what will be the each glass size that i have to arrange?
What is breadth of tank
@@AquaTechInfo 1.5 feet breadth and 2 feet height and 3 feet long...... 10 mm glass
Hi sir can i joined 2 acrylic sheets as bottom base for my 5 feet tank [5 feet length × 1feet width × 1.5 height ] is there any water leaking problem if i joined 2 acrylic sheets as bottom base sir.please help me sir.
I'm Going to make 5 feet aquarium.inspired by your diy videos. Professionally I'm a lecturer but I'm trying to make aquarium by watching your videos sir.🙏🙏🙏
I'm making 5 feet acrylic aquarium with 10mm thickness sir
Which silicon is better for 12 mm aquarium... Our aquarium leack again and again with plz rly
Dow Corning OR Walker's GP
is sanding the area before applying silicon is good for better grip and strength??? i mean while glueing
Yes definitely
Length 30
Breath 18
Hight 20 ki hai tho plzzz btao usKe left rite side kya size lene hai 8 mm me plzz help me
Vgood❤❤
Super brother
Please, I do not understand Hindi.. My question is, how much do I charge for the side panel after deducting the thickness of the glass? How many mm to put the silicone material... Greetings
Can you please clarify your query. Which side are you talking about? By the way, where are you from?
Aquarium kitn feet ka hia ??
Same size aquarium without rip 10mm glass me bana skta hu???
what size you want to make?
Hi.. please Tank size 24"x12"x15" ka explain kare...
सर .pl.suggest me 1.5 feet fish tank all glass size & glass mm size .pl.reply
length = 24 inch
width = 12 inch
height = 15 inch
glass thickness = 6 mm
Vai mene apka full video 3 ber full dekha hu ferbi glass dimension nehi nikal para huu please tell me what is the dimension in 2 side
What is the height of the straight side and the opposite side mirror, is it 5mm to bring it to the same level? not cut
All four sides will be placed on base glass so all sides must be of same height to attain eaqual hei
From where can we buy silicon online?? Cost?
Amazon 250-450
Sir uper wali full size lai sakti h kya
Means?
Hardware store online
🙏🏻Namaskaar Sir how much 300ml bottle of silicone is required for making 4×2×2 feet aquarium?
1 is sufficient but keep in hand 2 for safety
bro some people dont put all the sides on top of the base, they put the front and back on the side and only the tank sides on the top of the base. whats the difference ? can you pleae explain?thanks
Sure I will explain through video
@@AquaTechInfo by when can I expect that video ?! I'm planning to build a tank soon
@@AquaTechInfo actually would you mind just telling me which way is better here cos I'm sure the video will take.some.time. thanks !!👍
42"*16"*18size10mm how much want width glass size please reply ❤
Sir bahut hi aacha lagaa aap ka video
Par glass shop wale Itna perfect nahi cutting karte hai
Maine apne aquarium ka front glass change kiya tha glass sahi cut Nahi kiya tha shop wale ne
You have to told them about the purpose for which you need that piece of glass
3 fit tak hai kya ye
kya is size ke loye 6mm glass le skte he...??
First view, like & comment 😄
Rip kis liy use hoti hain aur kahan lagti hain ?
These are supports to make tank joints strong and to prevent bending of glass
Sir can you pls help me to get the measurement of glasses for 2.5/1.5/1.5 @ 6mm glass.....pls.....I am form kolkata....pls Sir
have you made it?
Sir plz jb aap itna acha explain krte ho, to background music mat rakha kro. Plz.. this is my suggestion.. baki aap pr nirbhar he.. anyways I always like your videos and watch till end. Thank you.
Noted sir
Background music is good... No problem
Bhai 1ft tank ka length width and height kitna hota hai or water capacity kitna hai
Please tell length x breadth x height of your tank?
Muzhe 5 ft x 2 ft x 2 ft ki aquarium banana hey. ..15 mm glass se.
Bottom ke side side pe front back side glass lagau ? Jese ADA aquarium hota hey. Ya front back bottom ke bahar lagau aur side panel dono bottom ke upar lagau ?
Please send me the dimensions for glass cutting
Paste all sides on bottom glass. I've never paste sides at side of bottom glass
@@AquaTechInfo but ADA company they are making all glass pannels around bottom.
@@AquaTechInfo and in Bangalore Mayur Aquscaper making front and back on side of bottom and right-left glass on the top of bottom but inside of front and back
All have their own style of manufacturing
3.5feet length 1.5feet hight16inch width 10mm thiknes glass he tho width glass kithana kamthi karke cutnekana bhai❤
For making 5x2x2 feet aquarium with 12 mm glass, if the following reading are correct?
Base, Front and Back glass- 60"x24"
Side glass- 24"x23"
Bracing long- 59"x2"
Bracing short- 23"x2"
Sir mei confused hoo gaya hu K-
A) 23" ya fir 22"24mm lu?
B) 59" ya fir 58"24mm lu?
Ku k aap bole the k 1 mm silicon k liya lagta hai.. Thora guide kar dijiya sir..
Your dimentions are absolutely right. Just keep bracebar's length 1 mm short so that they can fit correctly inside structure
Thank you sir..
Sir actually I want to say which of the following dimension is correct between model 1 and model 2?
Model 1-
Base, Front and Back glass- 60"x24"
Side glass- 24"x23"
Bracing long- 59"x2"
Bracing short- 23"x2"
Model 2-
Base, Front and Back glass- 60"x24"
Side glass- 24"x22"24mm
Bracing long- 58"24mmx2"
Bracing short- 22"24mmx2"
Model 1
Thank you sir for your guidance
Would be great if you can show how a rip is placed
Watch video no. 179
Please guide me i want big size aquarium calculation
sir kya mai 3.5 ft ke tank ko 5 mm glass se bana sakte hu kya ....breath 1.2 ft ....plzz help
Please clarify your query
@@AquaTechInfo now sir suggest some option ........or sir 2.5 ft tank ke liye kitne mm ka glass sahi rehaga
Yes you can go with it
sir please reply me am i right?.ok thankyou sir
Bro frntwal base ke upaer lagana hy kya ha ya said se
Kese lagaye tho acha hy
All 4 sides should paste on base
Hello brother,I need glass dimensions for 2ft length 1.5ft width 1.5ft height in 8mm glass will you share me
Hi sir … I have cut the glass with same specifications but some where I feel insecure because of the height is 24inch and breadth only 15 inches .. Is this safe … with bracings?? or shall I reduce the height ?
If you use bracebars properly then there is no need to worry
Sir me 3.5feet/1.5feet/1.5feet ka aquarium banana chahta hu glass thickness 8mm . Sir glass cutting ki dimension thoda bataiye
Ok
length = 24 inch
width = 12 inch
height = 15 inch
glass thickness = 6 mm
lift side Or right side =???
Which glue is good for 12 mm aquarium..
Dow Corning OR Walker's GP
Sir aapne jo drawing bnyeso full radi huvaso video ka link send me sir
Sharma ji
I am planning for 3 feet X 1.5 feet X 1.5 feet glass fish tank with normal plain glass with 10 mm glass thickness instead of 8 mm as suggested by aquatools for a safety factor of 3.8.
For 10 mm thickness do I need bottom and side brace bars. Please suggest. I wish to avoid them hence I increased the thickness by 2 mm. Will this suffice.
Thanks
Rajiv
Sharma Saaheb I would really appreciate a prompt/quick response. Thank you so much.
Yes you can. But joint glass perfectly to avoid any future mis-happening
@@AquaTechInfo thank you so much. Just one more query. To be more safe with 10 mm glass how many braces you think (top, bottom, sides) you think is required to be better safe than sorry. Please advice. Thanks
At base 2 for back and front wall. At top 4 to make a frame along with all the sides
@@AquaTechInfo Thank You so much for replying. Thanks Sharma Saaheb 🙏👍🏻
What will be the total cost for 15f glass 8mm??
Check at your place
Sir aquarium tank cover normally kis kis size ka hota h
Of which material?
There some problem with your side dimensions. If you are shortening thr side glasses width? Then how are you placing the side glasses? Above the bottom or around the bottom glass!
Your calculations for sides have some errors.
These are tried and tested dimensions. All sides will be placed on bottom glass
4 x 1.5 x 1.5 feet ke liye kitne mm ka glass use krna chahaiye.plz jaldi reply krna..
Use 10 mm
Thanku🙏
3.5feet 22inch.hight 20inch.length tank banane keliye kn sa mm glass use karu
8-10