This is your fault. If you want to spread it out thin going forward then you need to start driving forward so the heavy material doesn't pile on the gate while it's flapped open at the bottom. If you wanted to dump this all in that one spot then you should have the doors completely open from the middle and secured on either side completely out of the way so the material obviously doesn't have an obstacle. You had thousands of pounds piling up on the door, you weren't going forward, what did you think was going to happen? You're lucky they keep replacing it I'd tell you to kick rocks
@@JohnDoe-fg2oqIf individual was spreading then the chain should have been let out more on the gate, then start to move forward and stop raising the trailer, material was starting to fall towards back gate, with momentum of driving forward would have moved material backwards without all at once all material falling backwards breaking the gate Then as material emptied out of trailer then gently raise trailer to move material gradually towards back of the trailer Simple physics and common sense together as in this case makes no mistakes The other way it's operator error If he was dumping material in one area, not spreading, he needed to open gates in which he clearly forgot or did not know he needed to do Either way operator error
I would consider this partly operator error, partly loader error partly manufacturing isdue. I personally would have raked it level and toward the tailgate first. I feel the design of the latch could have been designed better. I'm currently looking at several brands of dump trailers and see design and quality all over the place. You get what you pay for and the cheap trailers do cut corners.
Could totally see that coming. Our local trailer dealer has a couple of trailers with broken spreader tail gates . Look just because they say it can doesn’t mean it will.
Oh that’s unfortunate. I have a dump trailer like yours except I have the regular barn doors. I’ve thought of getting a trailer with a combination gate but I think I’ll keep my trailer, thanks for posting.
@@erikcooley7927 it's true you get what you pay for the gate was replace three times repaired 6 the cylinders having replace once and axles we replaced
Kaufman is the way to go best $9k spent I have 4 of them they aren’t top of the line as far as paint and add ons but they definitely do the job and are tough. Have had one for over 3 years and haven’t had to replace but a Battery and use it everyday
Cant quite see, is there a cam lock at the top of the gates? Could possibly put a bar across to give more support. I have a diamond c and it only has the cam lock at the bottom, nothing at the top locking the two doors together. 😢
Dirt weighs way more than Google says it does usually. Little 7x14 trailer can't handle even half of that. 7ftx14ftx4ft= 14y3 or 7y3 at half. So 14k at half full, 28k at full. Dirt and concrete are nightmares. Glad no one was hurt. I made the same mistake starting out though!
If it's a carry on trailer their highest rated trailer is 11k. You're probably double/triple that. But hard to tell the size and amount from the video. If you want to over load go with a tri axle or a way over built trailer like gatormade. Cheers!
I get weight tickets on each load it's 10,000 lb I question that all the time because sometimes it looks like less and sometimes it looks like more I think it has to do with the moisture content
@@mrbeardlygames7552 that was exactly 10,000 lb I have the ticket to prove it picked up the material drove 15 miles and broke it first time ever manufacturer place that after seeing the video and the ticket
Right the jacks are going to stress if you have all that weight being supported while fully extending! Helps to open the gate, especially since you won’t get the gates open with all the rubble putting pressure on the gates! Js
Looks like a bad design to me. For everyone saying operator error that's ridiculous. There's no way to operate this trailer reliability at capacity when dumping and not have this failure. You'd be walking on egg shells every time you dump just hoping the gate holds.
Obvious design flaw there. The center latch on those "barn door" style spreader gates should be 2 or 3 horizontal 5/8 or 3/4 inch diameter sliding pins, a good foot long in order to take that kind of stress. Nothing some welding, bar stock and schedule 40 black pipe can't fix.
What did you think was going to happen? Did you think the door hing and pin was going to hold a couple thousand pounds falling into it. You open the doors and hook them open first. 🤦♂️
It's a 14,000 lb dump trailer with 10,000 lb of material in it manufacturer said it was a defect and replace parts I showed them the video with my with my material ticket to prove the weight that was my first time using it The gate broke three more times after that they replaced it every time
With a dump trailer your not supposed to lift to full height before starting to drive forward should have started driving after the first little bit broke loose. That way there is not so much weight bearing down on only the one locking point in the center
Probably one of those 16ft dump trailers which have an asking price of 22K 😂 besides sometimes depending on what your dumping you need to help shovel it out. But that would mean work and possibly getting dirt on your hands or clothes 😮
First off don’t chain the door on the dump trailer, just open the bottom and let it spill out, also you gotta keep moving, don’t keep raising it until it dumps it all, raise it bout 1/2 3/4 then take off SLOWLY, u can always back up and get raise the bed about another 12”
You don't even have the chain set correctly. Barely anything could come out. You put 5 tons on that door. What do you expect. Totally operator error...
Not a thing seemed wrong with the trailer. This obviously was an operator error as the tailgate was closed when it should have been opened for the gravel to make it out. I hope that the trailer brand is not disclosed but the uploader could be sued for defamation.
At the end of the day you get what you pay for I bought an inexpensive dump trailer had high expectations this is my fourth dump trailer never had an issue with the gate breaking I step up and spend some serious money and it literally broke on the first day
Shouldn't have gotten moist clumpy material. User/virgin error. If you got a nice dry mix it would have spread good. But, with abc that is wet it would do exactly this.
The way you have your gate set up with the chains only opening just a little is your issue. Your set up to spread material down a drive way. Where a little comes out at a time while your moving. When you went to dump the material bridged up not allowing more to come out and by fully lifting caused 10,000 pounds of material to hit your gate and blow it open. Next time when you want to dump in one spot you need to open your doors and latch them to the side then dump or if your careful you can leave the chains off which would allow the gate to hinge all the way up allowing most if not all your material out without breaking your trailer. Best recommendation would be to open both doors and latch them back tight to the side of the trailer then dump.
The gate is set up for it can tailgate spread if the gate is not able to do that the manufacturer should not offer that as option my last dump trailer I had for 8 years tailgate spread all the time the same way with no issues the funny thing was it was a 10,000-pound dump trailer and I was putting ten thousand pounds on it I was able to tailgate spread every time with no issues not recommended I didn't find out it was a 10,000-pound dump trailer until I tried ordering brake pads that's why I bought a new dump trailer it has done nothing but fall apart I've had both cylinders I've had both axles replaced the tailgate memory place three times repair twice and the welder literally cracking the old saying you get what you pay for is totally true I will not buy on Price ever again
Smh I remember my first time around a dump bed trailer & messed up. First by driving to slow & then I had the common sense to ask someone with more experience to walk me through how they do it & things they learned over the years. Valuable knowledge at 14 & is still just as viable as today. First lesson he needs to learn is get rid of the ego & ask for help when you don't know something. Second a bigger checkbook doesn't offset stupidity. Third, stop being lazy & help the load down by hand as needed so you don't shift your center of gravity too fast. It only takes half a heartbeat for something to go wrong & someone get badly hurt or killed. Like here what if when it shifted that much weight all the way back it picked the trucks rear wheels off the ground & causes everything to move running over someone or crushing them. Their injury or death would be on your head & that's not something anyone is prepared to deal with
Opinions are a lot like a hose everybody has one this is my six dump trailer I've pulled over 50,000 miles locally I'd buy dump trailer use it for a couple of years and then sell it this is the first dump trailer ever to have these kind of problems thanks for your opinion but in this situation I totally disagree
The trailer has 10,000 lb hauling capacity it is a 14000 pound trailer the media was no bigger than a 57 stone the tailgate spreader was set at 4 in the manufacturer of the trailer saw the video and replaced it free of charge of course they said that has never happened before I will say you get what you pay for if you buy a lesser expensive trailer you and save $5,000 upfront but it cost you more in the back in
People today will use a scissors like a hammer and get mad when it doesn’t cut. The doors literally have a locking pin so you leave them fully open when dumping. Notice how the doors are vertically mounted and not horizontally at the top like a DUMP TRUCK. You use the equipment wrong, that’s on you.
The dump trailer has a 2-way gate tailgate spreading is one of those options. Gravel asphalt millings I showed the video to the manufacturer they said it was a defective gate and replaced it.
It's a dump trailer not a tri-axle. I've seen many inexperienced users do this. Live and learn. Sometimes the hard way and sometimes the expensive way.
For the last ten years I've had three different dump trailers never had a problem with tailgate I finally buy me a brand new trailer direct from the manufacturer told them exactly what my intentions to do with it and they said no problem they have replaced the back gate three different times
I do this regularly with my Texas pride dump. Knock on wood but no issues yet. I’ve never even hear of this happening. The spreader gates are supposed to be designed for this.
The title should read. “New dump trailers owners shockingly don’t know how to properly operate dump trailer .”
Driver error... Having your wife as a spotter is a double whammy 😂😅
This is your fault. If you want to spread it out thin going forward then you need to start driving forward so the heavy material doesn't pile on the gate while it's flapped open at the bottom. If you wanted to dump this all in that one spot then you should have the doors completely open from the middle and secured on either side completely out of the way so the material obviously doesn't have an obstacle. You had thousands of pounds piling up on the door, you weren't going forward, what did you think was going to happen? You're lucky they keep replacing it I'd tell you to kick rocks
the side chain is still hooked as well totally his own falt
I blame the wife, she was just there watching instead of knowing what to look for 😂😂😂
He was waiting for the gravel to go to the back to start falling out before driving. You need to watch this again.
@@JohnDoe-fg2oqIf individual was spreading then the chain should have been let out more on the gate, then start to move forward and stop raising the trailer, material was starting to fall towards back gate, with momentum of driving forward would have moved material backwards without all at once all material falling backwards breaking the gate
Then as material emptied out of trailer then gently raise trailer to move material gradually towards back of the trailer
Simple physics and common sense together as in this case makes no mistakes
The other way it's operator error
If he was dumping material in one area, not spreading, he needed to open gates in which he clearly forgot or did not know he needed to do
Either way operator error
I would consider this partly operator error, partly loader error partly manufacturing isdue. I personally would have raked it level and toward the tailgate first. I feel the design of the latch could have been designed better. I'm currently looking at several brands of dump trailers and see design and quality all over the place. You get what you pay for and the cheap trailers do cut corners.
Could totally see that coming. Our local trailer dealer has a couple of trailers with broken spreader tail gates . Look just because they say it can doesn’t mean it will.
Or doesn't mean you should
Why aren't you raking material toward the rear? Why isn’t someone slowly driving forward? Why, why, why???
Not all dump trailers are equal. Saving $1000 is cool if you are just hauling tree trimming and mulch.
I saved over $1000 on my new 14000lb gvw dump trailer.
I have hauled the max many times. It has not let me down.
Operator Error lol
If the gates where open the jacks wouldn’t have stressed out supporting all that weight!
You have to be smarter than the equipment...
Sorry this happened, thank you for sharing a learning experience. Everyone in comments always know better.
Oh that’s unfortunate. I have a dump trailer like yours except I have the regular barn doors. I’ve thought of getting a trailer with a combination gate but I think I’ll keep my trailer, thanks for posting.
It works for dump trucks for two reasons , #1 the load doesn’t hit the top of the dump gate and #2 the dump truck gate and pins are super heavy
Dump trucks also don’t have split gates their tail gate is solid.
That’s why you don’t buy a cheap dump trailer
Shasta lake trailers all the way I-beam frame
@@erikcooley7927 it's true you get what you pay for the gate was replace three times repaired 6 the cylinders having replace once and axles we replaced
As soon as I saw the tailgate I knew it was junk. Diamond C is the way to go.
Cheap trailer.
They didnt open the rear doors. Not a cheap trailer. This is operator error lol
Kaufman is the way to go best $9k spent I have 4 of them they aren’t top of the line as far as paint and add ons but they definitely do the job and are tough. Have had one for over 3 years and haven’t had to replace but a Battery and use it everyday
Cant quite see, is there a cam lock at the top of the gates? Could possibly put a bar across to give more support. I have a diamond c and it only has the cam lock at the bottom, nothing at the top locking the two doors together. 😢
Well at least they didn't tear the trailer up just the tailgates !! Open up the chains a bit and move Forward !!
Rawmaxx dump trailer is awesome & has the extra latch at top of the gate
Dirt weighs way more than Google says it does usually. Little 7x14 trailer can't handle even half of that. 7ftx14ftx4ft= 14y3 or 7y3 at half. So 14k at half full, 28k at full. Dirt and concrete are nightmares. Glad no one was hurt. I made the same mistake starting out though!
If it's a carry on trailer their highest rated trailer is 11k. You're probably double/triple that. But hard to tell the size and amount from the video. If you want to over load go with a tri axle or a way over built trailer like gatormade. Cheers!
I get weight tickets on each load it's 10,000 lb I question that all the time because sometimes it looks like less and sometimes it looks like more I think it has to do with the moisture content
@tomsbigworld Gotcha! Yeah I'd get rid of that trailer then for sure!
@@mrbeardlygames7552 that was exactly 10,000 lb I have the ticket to prove it picked up the material drove 15 miles and broke it first time ever manufacturer place that after seeing the video and the ticket
😅 forgot to ask about the door hing weight capacity
with certain things, saving money costs you in the long run. just like cheap work isnt good and good work isnt cheap.
What is the outcome ? What was wrong with the trailer afterwards ? What did you have to do to fix this ?
They replaced the whole rear gate it broke two more times they replaced it all three times it was the cam lock at the very bottom that broke
100% operator error. Should have started move forward when that load began to move. That tailgate was not designed to hold that much weight. 🤨
Lol those doors should’ve been opened…..that’s a lot of weight coming down
Right the jacks are going to stress if you have all that weight being supported while fully extending! Helps to open the gate, especially since you won’t get the gates open with all the rubble putting pressure on the gates! Js
You don't know what a dump gate is!
Looks like a bad design to me. For everyone saying operator error that's ridiculous. There's no way to operate this trailer reliability at capacity when dumping and not have this failure. You'd be walking on egg shells every time you dump just hoping the gate holds.
I bent both hinges first tree job. Dumping a load and log rolled out both sides on each door 🤦♂️
Like how damn brandon 😂😂 could see that coming
You should have got a Load Trail trailer
they are heavy build and can handle that weight easy
What brand ?
You just can’t overload those two little doors and expect them to hold off those little pins keeping them closed
Gotta make sure you read the fine print 😂
Obvious design flaw there. The center latch on those "barn door" style spreader gates should be 2 or 3 horizontal 5/8 or 3/4 inch diameter sliding pins, a good foot long in order to take that kind of stress. Nothing some welding, bar stock and schedule 40 black pipe can't fix.
Dang why does everyone miss the best dang part and then look away like someone died
So shocking I had no idea it was going to break like that 🙄
I ordered mine WITHOUT that worthless feature. Simply more to fail.
At first glance i feel like you should have been moving forward
I will learn from your mistake thanks for uploading this.
Seen that coming
Why would you do that you only see dump trucks do that because they have a special tailgate system
What did you think was going to happen? Did you think the door hing and pin was going to hold a couple thousand pounds falling into it. You open the doors and hook them open first. 🤦♂️
Too much gravel was already dumped before you took off. The gate got caught on it and broke. User error.
It's a 14,000 lb dump trailer with 10,000 lb of material in it manufacturer said it was a defect and replace parts I showed them the video with my with my material ticket to prove the weight that was my first time using it The gate broke three more times after that they replaced it every time
With a dump trailer your not supposed to lift to full height before starting to drive forward should have started driving after the first little bit broke loose. That way there is not so much weight bearing down on only the one locking point in the center
Wrong gate! I would totally customize my own gate if I was spreading material..
Yeeee. Go with the standard dump basket pattern like you see on rock and gravel trucks. throw 2 chain pockets in and your good to go!
The gate doors weren’t open ya goof! 😂😂😂
The swing gate latch wasn’t secured. Bogus.
Looks like 5 yards instead of 5tons
What brand dump trailer? My guess is not a Sure Trac or Diamond C
Carry on out of ga
Any dump trailer is better than no dump trailer but there is a reason why the name brands cost more.
@@RenovationsandRepair i have a diamon c, and it does NOT have a cam lock at the top of the doors, ONLY at the bottom.
Yeheehehehehee
As others have said. Driver error and… bought the wrong (lightweight) equipment for tailgating gravel. Provided good content for a vid though. 😂
Let me guess… PJ trailer?
What brand of trailer was that?
Carry on
Definitely his fault. Too much force on the trailer doors. Pull forward
You gotta open the doors before you start to dump!!!
Probably one of those 16ft dump trailers which have an asking price of 22K 😂 besides sometimes depending on what your dumping you need to help shovel it out. But that would mean work and possibly getting dirt on your hands or clothes 😮
That trailer looks like it came from temu
1st off this is a driver fault he supposed to drive while spreading that’s why it’s called a spreader gate
Maybe next time remove the ⛓️
First off don’t chain the door on the dump trailer, just open the bottom and let it spill out, also you gotta keep moving, don’t keep raising it until it dumps it all, raise it bout 1/2 3/4 then take off SLOWLY, u can always back up and get raise the bed about another 12”
You don't even have the chain set correctly. Barely anything could come out. You put 5 tons on that door. What do you expect. Totally operator error...
Hopefully that trailer was replaced or repaired by the trailer dealer.
It's on the third back gate
@@tommiller67 then I hope some re-engineering was done to fix the first problem from manufacturer.
He went all the way up he be to go slowly & move the trailer also
Not a thing seemed wrong with the trailer. This obviously was an operator error as the tailgate was closed when it should have been opened for the gravel to make it out. I hope that the trailer brand is not disclosed but the uploader could be sued for defamation.
This is a 2 way gate we can spread it and like this.. manufactured replace the gate because of faulty weld.
What brand of trailer?
Career on
The funny part she forgot the guy's name she said babe babe stop.
Who'd have thunk ?😂
Why didn't you open the door?
It's a three-way gate close open and tailgate spread it was in the tailgate spread position and no piece in their was larger than a 57 stone
I never like to risk it i always open my doors.
At the end of the day you get what you pay for I bought an inexpensive dump trailer had high expectations this is my fourth dump trailer never had an issue with the gate breaking I step up and spend some serious money and it literally broke on the first day
How much did it set you back I bought a 12x 6 x 6 for 11k
@@naplespowerwashers it's a 14000 pound 7 by 16 $7300 it's a 2022
What brand is that?
Carrion
Carry on
Stop buying cheap trailers, diamond c, iton bull,and maxxd won't do that even if you material isn't touching the gate.
Yep, that was always going to happen
Why you didn't open the barn door to dump the dirt ?
You try to spread it, but you have to move vehicle forward as you spread.
Cheap looking trailer
Trailer was good. Should’ve obviously opened up the gate with all that.
Shouldn't have gotten moist clumpy material. User/virgin error. If you got a nice dry mix it would have spread good. But, with abc that is wet it would do exactly this.
The way you have your gate set up with the chains only opening just a little is your issue. Your set up to spread material down a drive way. Where a little comes out at a time while your moving. When you went to dump the material bridged up not allowing more to come out and by fully lifting caused 10,000 pounds of material to hit your gate and blow it open. Next time when you want to dump in one spot you need to open your doors and latch them to the side then dump or if your careful you can leave the chains off which would allow the gate to hinge all the way up allowing most if not all your material out without breaking your trailer. Best recommendation would be to open both doors and latch them back tight to the side of the trailer then dump.
The gate is set up for it can tailgate spread if the gate is not able to do that the manufacturer should not offer that as option my last dump trailer I had for 8 years tailgate spread all the time the same way with no issues the funny thing was it was a 10,000-pound dump trailer and I was putting ten thousand pounds on it I was able to tailgate spread every time with no issues not recommended I didn't find out it was a 10,000-pound dump trailer until I tried ordering brake pads that's why I bought a new dump trailer it has done nothing but fall apart I've had both cylinders I've had both axles replaced the tailgate memory place three times repair twice and the welder literally cracking the old saying you get what you pay for is totally true I will not buy on Price ever again
Open the lift gate door so the heavy load can start running out!
It's a spreader gate. The biggest issue is there is no cam lock at the top of the gate. The load hit and blew out the doors. Bad design.
What kind?
The brand is carry-on I hate to say it but it's they're very low quality from the welds up
Cheap trailers
It's true you get what you pay for
That's 100% operator error
Great capture
Jesus! Open the doors up and lock them back before you dump next time!! 😅
THANK YOU BRO💯💥💯💥💯💥
Wow, that sucks. That's a lot of gravel there. What brand and size trailer is that?
14,000 lbs trailer with 10,000 lbs ground milling
@@muletowndumpsters the brand is carry on but the quality of the trailers are very lacking right from the welds up
A DiamondC trailer would of never done that.
It looks like there’s about 14 tons of gravel on there just cause it fits doesn’t mean it’s OK to haul
Operator error 😆
Smh I remember my first time around a dump bed trailer & messed up. First by driving to slow & then I had the common sense to ask someone with more experience to walk me through how they do it & things they learned over the years. Valuable knowledge at 14 & is still just as viable as today. First lesson he needs to learn is get rid of the ego & ask for help when you don't know something. Second a bigger checkbook doesn't offset stupidity. Third, stop being lazy & help the load down by hand as needed so you don't shift your center of gravity too fast. It only takes half a heartbeat for something to go wrong & someone get badly hurt or killed. Like here what if when it shifted that much weight all the way back it picked the trucks rear wheels off the ground & causes everything to move running over someone or crushing them. Their injury or death would be on your head & that's not something anyone is prepared to deal with
Opinions are a lot like a hose everybody has one this is my six dump trailer I've pulled over 50,000 miles locally I'd buy dump trailer use it for a couple of years and then sell it this is the first dump trailer ever to have these kind of problems thanks for your opinion but in this situation I totally disagree
What was the plan here ? 💀
To tailgate spread I had the chain open 4"
2 tailgate spread
I mean why you got the spread chained so close
Should’ve grabbed and shovel and brought that material down instead of just watching your investment go to sht
What did you think was going to happen?
Why were the doors not open?
It's a spreader gate, it hinges at the top so you can spread the load. No cam lock at the top, when the load hit, it blew the doors out.
Looks overloaded.
You have to start pulling forward slowly when unloading. Clearly operator error 😂
Its not the trailer. Its the operator.
But you will learn overtime. 😏
Nice way to seriously injure someone 😳🤣
Why is the gate chained? 😂😂😂 its a dump trailer, open the gates to dump!
the ole more money than sense
That tailgate is not designed to have that much weight on it
The trailer has 10,000 lb hauling capacity it is a 14000 pound trailer the media was no bigger than a 57 stone the tailgate spreader was set at 4 in the manufacturer of the trailer saw the video and replaced it free of charge of course they said that has never happened before I will say you get what you pay for if you buy a lesser expensive trailer you and save $5,000 upfront but it cost you more in the back in
People today will use a scissors like a hammer and get mad when it doesn’t cut. The doors literally have a locking pin so you leave them fully open when dumping. Notice how the doors are vertically mounted and not horizontally at the top like a DUMP TRUCK. You use the equipment wrong, that’s on you.
The dump trailer has a 2-way gate tailgate spreading is one of those options. Gravel asphalt millings I showed the video to the manufacturer they said it was a defective gate and replaced it.
Dump trailers aren’t toys 🧸, dumpster trailers are meant to be operated by real working men’s, not for kids on tik tok 🤦🏻♂️
Wow haters are going to hate you must be one of my former co-workers wish you well
Lol expensive learning mistake
Terrible user error. Common. Seriously 😒
That's dumb on there part you could clearly see it wasn't a spread gate
It is a three-way gate
Amateur hour lol
It's a dump trailer not a tri-axle. I've seen many inexperienced users do this. Live and learn. Sometimes the hard way and sometimes the expensive way.
For the last ten years I've had three different dump trailers never had a problem with tailgate I finally buy me a brand new trailer direct from the manufacturer told them exactly what my intentions to do with it and they said no problem they have replaced the back gate three different times
@@tommiller67 that's why we can't ever have nice things. Lol. Well I'm glad they backed it up and took care of it for you.
I do this regularly with my Texas pride dump. Knock on wood but no issues yet. I’ve never even hear of this happening. The spreader gates are supposed to be designed for this.
so dumb lol