Красота... Звезда только ему настанет в первые 10 минут работы. Ни капли смазки на гильзу... Она алюминиевая, махом нагреется и заклинит в стволе со всеми вытекающими... Специалист по покраске корпусов...
Mechanical cleaning of hardened cement damages plastic. To remove hardened cement from plastic without damage, place the plastic in acid for a day. Any, you can use strong acids too, for example hydrochloric acid. Cement will become loose. After removing cement, remove whitish stains with soda and alcohol-containing liquids for washing window glasses. For finishing, there are special reducing agents to restore the appearance of the plastic. This drill has a rather complicated device, a lot of work. Well done job.
Here you can clearly see the difference between Bosch Blue and Bosch Green, Bosch Blue mainly has an interior of metal, is therefore also more expensive and intended for the professional craftsman, Bosch Green has an interior of mainly plastic and brass, is therefore affordable for the amateur handyman.
Great restoration work. To easily remove remains of cement, use diluted muriatic acid, and there are products that improve the appearance of plastic without the need for painting. However, if you have a paint, give preference to the original color. Congratulations!
First acid as you say to dissolve mortar, then sandblast plastic, finally heatgun to melt surface of plastic and create shiny surface. No paint needed.
Сам, занииаюсь ремонтом инструмента и не только и плиты и т д. Но первое вижу, что четки чуть не последним снимают. Их вроде 1 снимают. А Фери с тазиком класс. Перф новый был. Только на 1 положил воду с перегедролю и все и маслом измазыл и делает ремонт.
Thank you. I started fixing my drill with a different video that completely skips the small cylindrical rollers at the base of the chuck, so when I pulled out the chuck, they went flying. It was a bitch looking for them on my shop floor among a million other small bits of metal. I wish I had found your video first.
I was so jealous to see there's a lot of machinery laying around just like that n that's something that u will not going to see or found on the scrapyard around here.
Boa amigo soi tecnico nesta area aqui em salvador-ba. E todos os ferro velhor aqui em salvador tem sucatas de ferramentas que vem de outro estado e daqui mesmo. Nos aqui nao compramos muitas peças de fabricante reapruveitamos as sucatas temos sorte aaui por isso
I have that same drill, quite a great masonry drill for the price and for it being a consumer product. Tore out my chimney and done plenty of other masonry type work with it and it still chooches.
Ok for light work ,, get a hilti when its gets time for real work , i bought a Hilti TE-76 P ATC at the pawn shop for $200.00 and that monster runs 1' bits thru a 10 thick foundation like its butter , 4' core bit nor problem , its heavy weighs 13pus pounds , still dont mind the Bosch for light jobs .
@@johnwallace1729 Oh yeah I'll bet, never tried core bits, any time I needed one, I had to go deeper than any of the core bits I found could do so I just ended up using a long smaller bit to make the hole manually. I imagine contractors have access to more heavy duty bits than consumers get at Home Depot.
Oye tantos taladros está bueno nada de que Tebas por Ai y te encuentras con una máquina , está mejor saber de dónde se sacó 👏👏👏 y haber como lo dejas de bonito el taladro 👍
I wonder how the careful use of a heat gun may go in restoring the plastic finish somewhat? In the same way as one works for black plastic bumpers and trim on a vehicle.
As ferramentas sempre tem de estar como novas após o uso pra evitar recorrer a empréstimo do vizinho ou sair pra comprar novas. É meio desagradável ficar na dependência ou em caso quebrar, ter que assumir pagar pelo conserto que se pode muito bem, evitar!
ага, я на канале ЕвгенийБелгород смотрел, бросают в какую то химическую херню забыл название которая старит за день как за месяц, потом типа "находят" и чинят с понтом, хотя оно и так новое было изначально, а поначалу поверил
I have same drill machine. But it gives too much vibration on drilling as well as on chisel and hammer function also. Kindly can you tell me the exact cause of vibration ???
If I attempted this, I would A - not have a clue how to put it together again, and B - stabbed myself with screwdriver! I suppose there is little or no financial gain in restoring power tools, but the satisfaction of giving it a new lease of life makes it seem worth it. Brilliant job!
How to make a restoration channel: take any working electronic of your home, cover with dust and mud, leave it in the middle of dirty place, take it and clean it up!
Bonne vidéo. Svp,voulez vous faire une vidéo spéciale ex.: "Comment identifier et chercher la bonne référence des jeux Balais charbons..." ...je n'arrives pas à trouver la référence de mon Burineure,marteau piqueur Makita. Merci
Знаете. В первой вижу блогера который восстанавливая инструмент работал с красивыми тисками всегда порожали видио где восстанавливают инструмент или ещё что то всегда тески убитые , спасибо за видио
What is the name ? The plastic you put in the small ball bearings the Red plastic . How I found online ? Please can you help me. I need one for my table saw motor . Thank you
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Красота... Звезда только ему настанет в первые 10 минут работы. Ни капли смазки на гильзу... Она алюминиевая, махом нагреется и заклинит в стволе со всеми вытекающими... Специалист по покраске корпусов...
Ого! Тут и мы русские заходим!)
Mechanical cleaning of hardened cement damages plastic. To remove hardened cement from plastic without damage, place the plastic in acid for a day. Any, you can use strong acids too, for example hydrochloric acid. Cement will become loose. After removing cement, remove whitish stains with soda and alcohol-containing liquids for washing window glasses. For finishing, there are special reducing agents to restore the appearance of the plastic.
This drill has a rather complicated device, a lot of work. Well done job.
It is important to add - many materials will not tolerate acid - for example, marble tiles.
Shhhhhhh
This is a good point, cement / mortar will disintegrate even in a weak acid.
Excelente restauracion de este taladro martillo Bosch GBH 2-26E, mis respetos desde Venezuela.
Yo de Brasil, muito me gusta.
Finally someone who doesnt put stuff on the road and says he found it😀
Yeah the smartphone repair videos. And they think we are fool.😂
True
Why are they doing this? Why are they pretending to find it by accident on the road?
@@emreabiniz01 the money from the video
With fake rust on plastic, because everyone knows plastic rusts 😅😅
That perseverance with cleaning the outer cases really paid, looks amazing.
Here you can clearly see the difference between Bosch Blue and Bosch Green, Bosch Blue mainly has an interior of metal, is therefore also more expensive and intended for the professional craftsman, Bosch Green has an interior of mainly plastic and brass, is therefore affordable for the amateur handyman.
Пособие- как Bosch превратить в Makita 😂
Great restoration work.
To easily remove remains of cement, use diluted muriatic acid, and there are products that improve the appearance of plastic without the need for painting. However, if you have a paint, give preference to the original color.
Congratulations!
Can you recommend the product that improve plastic appearance?
@@Magister3eros I have heard that mineral spirits will restore plastic appearance quite well.
First acid as you say to dissolve mortar, then sandblast plastic, finally heatgun to melt surface of plastic and create shiny surface. No paint needed.
@@arbit3r como é isso processo de restauração de plástico link de uma aqui no you tube ?
Ещё понравился ЧПОК когда якорь вытаскивал. Супер метод 😂👍👍. И щетки на месте😁😁
И тут мы русские есть!)
Это походу палевный Бош, точнее не оригинал...
😂😂😂 хороший инструмент разобрал и собрал. Я тоже так могу. Ни одной изношенной детали не заменил. Топ🔝🔝🔝 ёпт
Так перф в идеале - по смазке видно что не ушатан. Может и подшипники-то зря менял...
я таким рестораторам всегда минусую. Рабочую вещь сами в говне помаринуют, а потом ремонтируют, типа ремонтируют
Это не оригинальный Бош, а потделка...
Very good job, there are many parts to assemble, very difficult. congratulations boy.
這個視頻教學修復電 電鑽 工程：是對有 興趣維修 搵食工具是非常有利，多謝師傅很同youtebe 網友分享，真係好人，這些都是技術上的電器裝置藝術。
Nagyon szépen megjavitottad! Ügyes vagy.
Здравствуйте. Ротор вытаскивается после того как снимаются прижимные пружинки с угольных щеток и тем самым сохраняем и якорь и щетки от повреждений
Им похуй чтобы по красить и продасть, подделка боша так и выглядить, надпись лаком красить блядь идиотизм 😂
Сам, занииаюсь ремонтом инструмента и не только и плиты и т д. Но первое вижу, что четки чуть не последним снимают. Их вроде 1 снимают. А Фери с тазиком класс. Перф новый был. Только на 1 положил воду с перегедролю и все и маслом измазыл и делает ремонт.
You work with an inventive brain and skilled hands
You are a proficient man
Thank you for this great job
Nice to revive a great drill the boschammer was one of the first sds plus that broke the market and always will be a great tool
Thank you. I started fixing my drill with a different video that completely skips the small cylindrical rollers at the base of the chuck, so when I pulled out the chuck, they went flying. It was a bitch looking for them on my shop floor among a million other small bits of metal. I wish I had found your video first.
Excelente trabajo y talento.. Saludos desde.. Lima Perú 🇵🇪🇵🇪🇵🇪🇵🇪🇵🇪🇵🇪🇵🇪🇵🇪🇵🇪🇵🇪
Ктож рабочий перфоратор выкидывает? А тут нам прям помыл и почистил и готово, как то не верится.
Главное его перед видео засрать)) а потом из баллончика покрасить.
Не ну баек же в раструбе был) зн уже не рабочий)
Πολύ καλή δουλειά συγχαρητήρια 😊
Splendid job you did to restore that rotary hammer drill. It looks much better and it works like a charm as well. Well done.
Es un rotomartillo
well done! Excelente trabajo y muy bien documentado, saludos desde la Patagonia Argentina!!!
I’ve always wanted to see The Valdez Peninsula!
Brilliant repair! That was very nice to watch, thanks.
Great job. Thanks for sharing. It must feel good to give a dead tool a new lease of life.
I was so jealous to see there's a lot of machinery laying around just like that n that's something that u will not going to see or found on the scrapyard around here.
Boa amigo soi tecnico nesta area aqui em salvador-ba. E todos os ferro velhor aqui em salvador tem sucatas de ferramentas que vem de outro estado e daqui mesmo. Nos aqui nao compramos muitas peças de fabricante reapruveitamos as sucatas temos sorte aaui por isso
Damn. He is kind of genius. I have no idea what he is doing but it is satisfying.
Bardzo mądry i uczciwy elektromontrer dziękuję za informację
สุดยอดรีวิวได้ละเอียดมากครับ พอดีผมได้มาสองตัวก็จะลองซ่อมเองอ ะไหล่หาซื้อได้ทุกชิ้นใช่ไหมครับ ขอบคุณมากที่ให้ความรู้
Ну хоть подшипники 2шт поменял уже хорошо, за щётки молчу вообще 😁😁😁👍
У него новый шруповерт? А перф бош с Свалки? Не кончанный гений
Ты их шо, топишь эти инструменты, а потом чинишь????
Так и есть
Excelente trabajo de restauración saludos desde isla de Maipo santiago chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱
A great master for a very difficult job!
Nice hammer. I got 28 and its beast
Nice to see how hammer works.
É muita peça, para lembrar na ora de montar novamente. Parabéns, belo trabalho
Один вопрос. Почему в перфе не было смазки? Или прежде чем его выкинуть его заботливо почистили? 😂😂😂😂
El paraiso de cualquier restaurador genial ese lugar.
25:27 min muy bien disfrutados. Gran trabajo maestro 👍
nice job. a scrapped tool brought back to life 👍👍👍
Ulan helal olsun be! Bosch'un sana iyi bir 🏅 vermesi lazım 🏅🏅🏅👏👏👏👍
I have that same drill, quite a great masonry drill for the price and for it being a consumer product. Tore out my chimney and done plenty of other masonry type work with it and it still chooches.
Ok for light work ,, get a hilti when its gets time for real work , i bought a Hilti TE-76 P ATC at the pawn shop for $200.00 and that monster runs 1' bits thru a 10 thick foundation like its butter , 4' core bit nor problem , its heavy weighs 13pus pounds , still dont mind the Bosch for light jobs .
@@johnwallace1729 Oh yeah I'll bet, never tried core bits, any time I needed one, I had to go deeper than any of the core bits I found could do so I just ended up using a long smaller bit to make the hole manually. I imagine contractors have access to more heavy duty bits than consumers get at Home Depot.
Clearly, you work at the Bosch factory, it looks like you’ve done that 100 times! Great job!
@4:48 why is the top of what he's got in the vice moving? He's not even touching it. (it's what he removes in the next scene that moves) Weird
Oye tantos taladros está bueno nada de que Tebas por Ai y te encuentras con una máquina , está mejor saber de dónde se sacó 👏👏👏 y haber como lo dejas de bonito el taladro 👍
¡Excelente trabajo! 👍
Excelente video! Muy bueno! P.D.: Deberias hacer otro video restaurando la pinza pico de loro que aparece al minuto 18:56 jajaja!! Exitos!!
I wonder how the careful use of a heat gun may go in restoring the plastic finish somewhat? In the same way as one works for black plastic bumpers and trim on a vehicle.
Hi friend, it was excellent. Hug from Brazil.
Very very nice job .I injoy.many thanks
Хотел бы я посмотреть на эту свалку, у нас таких нет...
Марат, поехали посмотрим
да и перф внутри как новый.
@@mtechnologiya сами засрут сами отмоют. На эту тему классный видос на канале Евгений Белгород.
Не говори😂😂😂✊
Very nice video sir 👍👏👌
As ferramentas sempre tem de estar como novas após o uso pra evitar recorrer a empréstimo do vizinho ou sair pra comprar novas. É meio desagradável ficar na dependência ou em caso quebrar, ter que assumir pagar pelo conserto que se pode muito bem, evitar!
Amazing restoration 👏🙌🙌🤝
Блин какие это голимые постановки - жесть.
ага, я на канале ЕвгенийБелгород смотрел, бросают в какую то химическую херню забыл название которая старит за день как за месяц, потом типа "находят" и чинят с понтом, хотя оно и так новое было изначально, а поначалу поверил
Все ради просмотров ептеть
@@teshigawara5584 И коллектор на якоре прям новенький.
Bhai mshin hemr nhi bnati h kya smsya h norml m chalthi h htodi m bi chlti h
Excelente restauración. Ya en el tercer tornillo que sacó me perdí jajajaj
nice job 👍. with many parts & complex
What color did you use in the blue/green part of the casing? I have this GBH 2-24 DSE and I want to restore it.
Nguy hiểm thật ,từ củ thành mới 👍👍👍👍
How do u remeber to put all that litttle things in tjem places
That s realy great
this is real ecology. this Nobel Channel should receive .. 👏
Very good job. Thank you from the video.👍👍👍👍👍
Как так,где такие мусорки,почему не унас,это не реставрация это просто восстановление до рабочего состояния.
так он туда сам принес его ))) какой дурак в тайланде выкинет немецкий Бош, на котором даже надписи не стерлись
Я бы даже сказал что это обычное ТО.
Вынимать якорь не снимая щёток, это что то😂😂😂
I have same drill machine. But it gives too much vibration on drilling as well as on chisel and hammer function also.
Kindly can you tell me the exact cause of vibration ???
Aproape ți-o ieșit perfect.
Лайк если пришёл после канала Евгений Белгород)
Super cool detail works
Hey!!! dude you need to change the color of the table. The white color is very dazzling. I think the wood color would be appropriate.
Mantap coba kalau d indo banyak kayak.jdi pingin euy.ngomong2 ini dari mana.
Good restoration, well done
Wow great work. Just amazing.
Greetings from Germany my friend.
Всё хорошо, только после покраски похож на китайский контрафакт...
Подделка не думаю😂
Nice restoration my only critique is that the paint is kobalt/ silverline blue not Bosch blue
I just wanted to know how to get the three position switch apart and back in. I'll have another go....
If I attempted this, I would A - not have a clue how to put it together again, and B - stabbed myself with screwdriver! I suppose there is little or no financial gain in restoring power tools, but the satisfaction of giving it a new lease of life makes it seem worth it. Brilliant job!
😁
Just film it so you know how to put it back.
@@c.rob2323 Yep! I guess that's the whole point of it really - but it won't stop me from stabbing myself lol
@@Dudleymiddleton You'll have to take your chances with that..
I'm very impressed at how you remember where everything go.
also, you, sir, need to restore those big blue pliers you're using... :-)
he is recordig. he can rewatch it later
У нас такое на Авито продают, а тут выкидывают)
A Boschhammer with Hyundai color scheme is surely steal-resistant at the job site.
желание в будущем разобрать свой перф отпало)))))
Süper oldu 10 numara 5 yıldız 2 tane de ay var 😂
You gonna restore all of that ? Damn i need holidays' to watch all your video's :)
Good work. Grase use ?
How to make a restoration channel: take any working electronic of your home, cover with dust and mud, leave it in the middle of dirty place, take it and clean it up!
Bonne vidéo.
Svp,voulez vous faire une vidéo spéciale ex.: "Comment identifier et chercher la bonne référence des jeux Balais charbons..." ...je n'arrives pas à trouver la référence de mon Burineure,marteau piqueur Makita.
Merci
¿Donde esta ese desguace donde tiran tantas herramientas? porque no es normal
Good work 💪👷
Trabalho lindo parabéns.
Itu dinegara mana? Bisa banyak hand tools yang tidak terpakai dan dibuang seperti itu?
Знаете. В первой вижу блогера который восстанавливая инструмент работал с красивыми тисками всегда порожали видио где восстанавливают инструмент или ещё что то всегда тески убитые , спасибо за видио
Hang bãi đó o đâu vậy ban kiêm giúp minh con khoan được ko
The power transmission mechanism is the same as Makita's. I would have thought they had to be different.
Bro nice repair and new itmes fitting are their
Well, it sounds complicated, I think maybe you understand it so you can handle it😊👍
Thank you very much sir please I think give explanation from India
What is the name ? The plastic you put in the small ball bearings the Red plastic . How I found online ? Please can you help me. I need one for my table saw motor . Thank you
I don't know what it's called in English.Maybe it's called rubber bearing bush
Amazing, how many hours did you spend to rebuild it?
😍 вот как выглядит РАЙ😍😍😍😋😋😋
Me ajudou bastante, parabéns
you had tested it before, to see if it wasn't burned?
Is that all yours bro.