Почему не использовал корпус от этой же болгарки, вытянул статор и вуаля, вставляй туда этот моторчик, зачем городить колхоз, лучше б аккумулятор добавил и сделал автономную болгарку
Hello my dear friend ,your a very good electrical rewinder , your work is nice very clear.im fully watch from philippines thank you for tjis sharing👍👋👇👇👇🤝🙏🏼
I learned some things but I have to ask.... what exactly did you accomplish? You spent a day or so on making an angle grinder that you can get for $20? what am I missing?
I had a lot of old pipes and rebar to cut up and from what I read ruclips.net/user/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
Liebe Zuschauer! Baut das auf keinen Fall nach! Die elektrische Installation ist lebensgefährlich! Ich sehe keinerlei Zugentlastung. Der Schnurschalter ist dür diesen Zweck ungeeignte und die losen Einzeladern sind unzulässig. Die Gleichrichterschaltung aus dem Mixer lässt dieser lebensmüde Bastler einfach so in der Gegend herumhängen. Man vergleiche dies mit der Konstruktion des ursprünglichen Winkelschleifers. Dieser ist doppelt schutzisoliert. Alle spannungführenden Bauteile sind berührungssicher in dem Kunststoffgehäuse untergebracht, welches gleichzeitig das hintere Lagerschild für den Motoranker bildet.Dies ist seit Jahrzehnten Industriestandard und das nicht ohne Grund. Darüber hinaus ist die Konstruktion einfach sinnlos. Der Motor aus dem Mixer mag vielleicht 100 Watt haben, also weniger als ein guter Akkuschrauber. Der ursprüngliche Motor des Winkelschleifers hatte ca. 500 Watt. Diese Mixermotoren sind fast immer für Kurzzeitbetreib ausgelegt. Nach 3 Minuten muss erstmal eine Pause eingelegt werden, sonst gehen sie in Rauch auf. Lieber Bastler, bist du eigentlich bescheuert, eine Anleitung zum Bau einer lebensgefährlichen Murksmaschine ins Netz zu stellen?
Dandy idea. If you'll drill-out the threads on the nut closest to the head of the bolt, on your homemade clamp around your motor, it will tighten up. Otherwise the nuts will stay the same number of threads apart all the time and will never tighten up. The motor makes a magnetic field, so all that steel dust is subject to get pulled into the motor, since there is no case on it for its protection. At least, wrap it in duct tape and have a fan blowing somewhere to cool the motor. Other than that, it's a kewl idea! I love to watch your ingenious workings! THANK YOU!!!
I blew my Lidl 20V angle grinder when the cut closed up and jammed the disc. But a new tool was just £25. It’s variable speed makes it ideal for wire brushing rust.
hola me parece genial cuando el motor de tu amoladora se quema y no tiene solucionn , pero de cuantos voltajes es el motor que le pusiste y señores esto es bricolaje si te quieres comprar uno nuevo compralo pero la utilidad de una herramienta que vuelves a la vida es lo que cuenta
Ingenious, satisfaction of assembling that yourself. I am not an electrician, suggest add earth wire to the frame as not double insulated, just in case.
that's a good idea, but i would prefer if you'd have worried about the finishing and improvement of the tool's casing. ur welding machine is very cool, I wish I had one. I would take more a careful attention with the tool, if I were in your place. greetings from Brazil
Hola, hay dos cosas que no entiendo, la abrazadera como hace para ajustar si las dos tuercas tienen rosca y el sentido de giro es incorrécto cuando usa el cepillo de alambre.
when a similar stripped down small motor like the one you use, does it matter if it's DC or AC? I have a few DC motors that barely turn with 12v DC. I'm thinking of hooking up the two posts to an AC cord 110v, and see if it works fast. what do you think?
Nice idiya Bhai apake pass Jo welding tool he usaka nam kya he apane kahase kharida. Muj purchase Karne ke liye link do.please reply for further subscrbtion.
I'm sure the brushes, or what ever went bad on the grinder could've been fixed for$5.00 or salvaged from something else with a small mod... Think about the least force, applied to the most mass.. Time can be best spent, with project items in our consistent view... Ingineering is performed in the mind.
Я такой же привод на велосипед сделал. Да он собака не едет.мощности маловато. Как болгарку от 12 вольт использовать смысла нет. Обороты очень маленькие. А вот тяпки на поле затачивать само оно. Цены этому изобретению нет для фермеров. Не сгорит кромка ножа.
La idea es buena, pero para usarla con una batería de 12 voltios y convertirla a inalambrica, aun que convendría mejor buscar un motor de 20 voltios y ponerle una batería de 20 voltios para agregar más torque y que funcione de mejor forma
Надо было при помощи пластиковых бутылок и скотча в том же корпусе все замандюлить, а не выделываться с полосками из металла, ну или термоклеем- бюджетненько так бюджетненько...😀
Most angle grinder discs are rated for 10000-12000 rpm. Blender motors go upto 24000 rpm. At such high speeds, the grinding discs may disintegrate maiming/killing the user.
I like it a lot! :) But 1 - you can mount the shaft in the drill chuck and put the drill bit into the vice and it will center drill it very easy. And 2 - its quite posiible that this DIY project doesn't neccessary need the welding, as the hoseclamp could be used to hold the motor and you can buy it for cheap in every local hardware store. Cheers!
@@jeffcanevari3304 great idea, if you need a project to start working with metal, and to train your skills. Not to mention it is AC tool, converted into a DC and, in perspective, into the wireless tool.
I am glad that I live in a country where I can spend $20 to get a new tool instead of spending hours of my time fixing a broken tool. Though your idea is very clever and creative.
Мощьности мотора не хватает и он будет сильно перегреваться, от перегрева расплавяться пластмассовые детали в моторе и тут ещё металлические опилки попадают в отверстия с зади и прилипают к магниту из за чего мотор просто забьётся и сгорит.
Wowwww... it's a re-invented angle grinder which comes with a 250volts "sleeping-on-the-job" prevention device..!! Great for waking you up while on the job, with a high-voltage jolt...
And here I was thinking you were going to put it on the front fork of a regular bike 🚲 in order to make an E bike 🚲 you can also pedal. But good work and idea 💡 👏 👍 👌.
Почему не использовал корпус от этой же болгарки, вытянул статор и вуаля, вставляй туда этот моторчик, зачем городить колхоз, лучше б аккумулятор добавил и сделал автономную болгарку
Hello my dear friend ,your a very good electrical rewinder , your work is nice very clear.im fully watch from philippines thank you for tjis sharing👍👋👇👇👇🤝🙏🏼
5:31 what welder mig is that? can u share with us the model name
참으로 잘 만드시네요!가까히 있으면 마나 보고 싶은데 안타깝네요,앞으로 더욱더 발전 있으시길 바랍니다.
You made a dangerous angle grinder out of a relatively safe one. Gotta keep the population in check somehow I guess. Bravo darling!
this man just made a grinder out of a grinder, i love it
Hahahah. Reminds me of that beer commercial….GENIUS!
Although he did remove all safety aspects of said grinder. 10 out of 10 for that, aye
I learned some things but I have to ask.... what exactly did you accomplish? You spent a day or so on making an angle grinder that you can get for $20? what am I missing?
your mode is so good thank you for sharing wish you always be creative
I really like your project! Congratulations
I had a lot of old pipes and rebar to cut up and from what I read ruclips.net/user/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
9 ko
Liebe Zuschauer! Baut das auf keinen Fall nach! Die elektrische Installation ist lebensgefährlich! Ich sehe keinerlei Zugentlastung. Der Schnurschalter ist dür diesen Zweck ungeeignte und die losen Einzeladern sind unzulässig. Die Gleichrichterschaltung aus dem Mixer lässt dieser lebensmüde Bastler einfach so in der Gegend herumhängen. Man vergleiche dies mit der Konstruktion des ursprünglichen Winkelschleifers. Dieser ist doppelt schutzisoliert. Alle spannungführenden Bauteile sind berührungssicher in dem Kunststoffgehäuse untergebracht, welches gleichzeitig das hintere Lagerschild für den Motoranker bildet.Dies ist seit Jahrzehnten Industriestandard und das nicht ohne Grund.
Darüber hinaus ist die Konstruktion einfach sinnlos. Der Motor aus dem Mixer mag vielleicht 100 Watt haben, also weniger als ein guter Akkuschrauber. Der ursprüngliche Motor des Winkelschleifers hatte ca. 500 Watt. Diese Mixermotoren sind fast immer für Kurzzeitbetreib ausgelegt. Nach 3 Minuten muss erstmal eine Pause eingelegt werden, sonst gehen sie in Rauch auf.
Lieber Bastler, bist du eigentlich bescheuert, eine Anleitung zum Bau einer lebensgefährlichen Murksmaschine ins Netz zu stellen?
Thats cool! I like the way you left it stripped down and exposing the motor etc, very mad max-esque!
/
Dandy idea. If you'll drill-out the threads on the nut closest to the head of the bolt, on your homemade clamp around your motor, it will tighten up. Otherwise the nuts will stay the same number of threads apart all the time and will never tighten up.
The motor makes a magnetic field, so all that steel dust is subject to get pulled into the motor, since there is no case on it for its protection. At least, wrap it in duct tape and have a fan blowing somewhere to cool the motor. Other than that, it's a kewl idea! I love to watch your ingenious workings! THANK YOU!!!
I was about to write the same thing about the bolt threads
11:11 qual é o nome e modelo dessa placa que você ligou no motor DC ?
I blew my Lidl 20V angle grinder when the cut closed up and jammed the disc. But a new tool was just £25. It’s variable speed makes it ideal for wire brushing rust.
hola me parece genial cuando el motor de tu amoladora se quema y no tiene solucionn , pero de cuantos voltajes es el motor que le pusiste y señores esto es bricolaje si te quieres comprar uno nuevo compralo pero la utilidad de una herramienta que vuelves a la vida es lo que cuenta
Mantap mas keren banget, semoga sukses selalu dalam berkarya, semangat kk
Wow great idea 👍👍👍
на двигателе будет собираться металлическая пыль. Нужна защита двигателя.
Ingenious, satisfaction of assembling that yourself. I am not an electrician, suggest add earth wire to the frame as not double insulated, just in case.
😘😘
🎉q
Lộc chúc anh thành công trong công việc vui vẻ nhé
Nice,creative work,if inner modified mechanism is also coverd with cyliderical tin or PVC pipe then it may be looking in good shaped also.
that's a good idea, but i would prefer if you'd have worried about the finishing and improvement of the tool's casing. ur welding machine is very cool, I wish I had one. I would take more a careful attention with the tool, if I were in your place. greetings from Brazil
Amazing work I will definitely do this 😀
Creative mind, deft hands and access to some really good tools
Cost of new welding set is much higher than buying a new grinder, :-)
That welding work you can do it anywhere, it's not necessary to buy a welding machine.
Hola, hay dos cosas que no entiendo, la abrazadera como hace para ajustar si las dos tuercas tienen rosca y el sentido de giro es incorrécto cuando usa el cepillo de alambre.
ah you made from an angle grinder, a angle grinder..Great job. how much did you spend on parts, time and materials
Buen trabajo tengo una amoladora descompuesta y un taladro y varios motores como ese lo intentaré también.
A reutilizar la herramienta !!!
8:53 what is the name of that welding machine?
It is called mig welding.
What kind of welding machine and the cost which you used
No comments at this time... or probably any other. At least from what I gather in the comments. Lol
@@justintothetruth you used tig welding, mig welding or which type of welding in this video ?
@@newstaralbak2126 lol I have a couple mig mma/arc tig. He is using a mig and way nicer that rhe crap I have
where to get the spot welding machine you used
That's a MIG welder, he's just bumping the trigger.
Nticias@@shortattentionspangarage1312 . De
@@shortattentionspangarage1312ll
Se Vc colocar um tubo de pvc ficaria muito melhor e ainda teria como instalar o botão de liga e desliga.
when a similar stripped down small motor like the one you use, does it matter if it's DC or AC? I have a few DC motors that barely turn with 12v DC. I'm thinking of hooking up the two posts to an AC cord 110v, and see if it works fast. what do you think?
Que tipo de soldadura es eso? Donde lo puedo conseguir?
Good creativity.
ah you invented an angle grinder
عالی بود.اسم دستگاه جوش چیه؟چرا فرق داره با دستگاه جوش های توبازار
Were is the deference ...the same one ...
Todo muy bien pero que clase de motor es y de cuantas rebulucion
What kinda of welder is that?
Amazing idea 👍
Great idea. Ilike your spot welder....
Не ну, как вариант, может быть, молодец, если конечно сам придумал. Четыре из пяти, я бы поставил.
Wow amazing grinder
Wooww... bagus ide nya..
where to get welding machine. I need it
Одобряю.
Marvelous idea.
Nice idiya Bhai apake pass Jo welding tool he usaka nam kya he apane kahase kharida. Muj purchase Karne ke liye link do.please reply for further subscrbtion.
I'm sure the brushes, or what ever went bad on the grinder could've been fixed for$5.00 or salvaged from something else with a small mod... Think about the least force, applied to the most mass.. Time can be best spent, with project items in our consistent view... Ingineering is performed in the mind.
Bagus kami lihat kreatif kerja
Sangat bagus 👍
What a great video
Good idea this wss a dc motor about 18 v0lt no explain the source of power and also rpm of the motor?
Вот это нихера себе из болгарки болгарку сделал. Ай да фокусник 👍
Я такой же привод на велосипед сделал. Да он собака не едет.мощности маловато. Как болгарку от 12 вольт использовать смысла нет. Обороты очень маленькие. А вот тяпки на поле затачивать само оно. Цены этому изобретению нет для фермеров. Не сгорит кромка ножа.
@@ЭдуардЧечет 885 мотор и 18 вольт если 24 вольта будет как не хуже сетевой
Делать ему нехера вот и творит херню. У нас ни один мужик бы не догадался. Уж лучше бы яйца чесал.
❤👍👍@@ЭдуардЧечет
Great job.
What kind of motor you use
La idea es buena, pero para usarla con una batería de 12 voltios y convertirla a inalambrica, aun que convendría mejor buscar un motor de 20 voltios y ponerle una batería de 20 voltios para agregar más torque y que funcione de mejor forma
Можно было встроить движёк в старый корпус и не городить огород!
Excelente
⅘
Надо было при помощи пластиковых бутылок и скотча в том же корпусе все замандюлить, а не выделываться с полосками из металла, ну или термоклеем- бюджетненько так бюджетненько...😀
very good job
Genial!!! Yo lo hare con su carcasa. Asi se vera mejor. Y poner la elise para que no caliente.. gracias por compartir. Saludos !!!!!
Hola jose hiciste la adaptacion del esmeril. Saludos desde Venezuela
Most angle grinder discs are rated for 10000-12000 rpm. Blender motors go upto 24000 rpm. At such high speeds, the grinding discs may disintegrate maiming/killing the user.
Thanks; info like this can save me / others lives. Thanks
Galing naman
Sana madalaw Bahay Kong maliit boss
New subscriber idol
so you just replaced the old motor in an angle grinder with a new one. what a novel idea.
👀Awesome🔥 job!!👀
Хомут на двух гайках 😂 нужно убрать резьбу на внутренней гейке
you are amazing👍👍👍👍👍
Muy práctico pero no explican el motor de que aparato es, como se consigue, etc.. Agradecería una explicación. Gracias.
550dc 12v
Qué tipo de motor c utilizó en el esmeril
Que legal! Muito boa ideia! Aproveita a estrutura da lixadeira, sem perdê-la. Vou fazer isso com a minha, queimada. Grato! (From Brazil, Paraná).
몰라요~~~♡^
Türkçe diline çevirin
Salam ber sahabat ya om,🙏🙏🙏👍@@veyseldincer4088
MUITO BOM, ASSIM DÁ PRA BOTAR NUMA CADEIRA DE RODAS,FIZ COM UMA PARAFUSADEIRA E NÃO TEM FORÇA VOU FAZER ASSIM.
الا.نسان.اذا.فكر.يصنع.المعجزات.انظر.كيف.يعمل... .
I like it a lot! :)
But 1 - you can mount the shaft in the drill chuck and put the drill bit into the vice and it will center drill it very easy.
And 2 - its quite posiible that this DIY project doesn't neccessary need the welding, as the hoseclamp could be used to hold the motor and you can buy it for cheap in every local hardware store.
Cheers!
Great idea if you live in a third world country harbor freight $8
@@jeffcanevari3304 great idea, if you need a project to start working with metal, and to train your skills.
Not to mention it is AC tool, converted into a DC and, in perspective, into the wireless tool.
J
Bravo 👍
So you invented angle grinder machine.
New harbor freight grinder on sale::::$9.99😏
This guy is either a comedy genius or has no shame.
А ещё аккумы 18650 припаять к корпусу 3дэ ручкой и Шуриком обточить.
How do you think. amazing
Sir when you work please fallow safety..
Dude, didn't you hear? He said he made a _brilliant_ invention, and you're questioning brilliant? ?
hay quá, cảm ơn b
Blender motoru güçlü fakat düşük devirlidir. Karıştırıcı mikser olarak kullanılabilr.
Sir which small moter use to grender machine
Tall me name off moter
And which work off moter
Where purchase this moter
Глупость - не продаётся... Stupidity - not for sale ...
ESTA BUENO EL VIDEO PERO NO EXPLICA EL PUENTE DE CONVERCION Y LE FALTA COBERTURA AL EQUIPO Y LA LLAVE DE ENCENDIDO LO DEMAS OK GRACIAS DESDE ARGENTINA
I am glad that I live in a country where I can spend $20 to get a new tool instead of spending hours of my time fixing a broken tool. Though your idea is very clever and creative.
Jenius..mantul bang..
what kind of spot welding do you used . so super
Muy bonito y practico ,muchas gracias Felicidades
Okok
were are ypu
Мощьности мотора не хватает и он будет сильно перегреваться, от перегрева расплавяться пластмассовые детали в моторе и тут ещё металлические опилки попадают в отверстия с зади и прилипают к магниту из за чего мотор просто забьётся и сгорит.
Тем более на моторчику перекрыл
каналы охлаждения.
Genial ; tu cortadora de disco , buen diseño , practica y poco peso.
goog gob bro
Ya ok
Sdh lumayan ini yg perlu dikembangkan tinggal mutu kerja 🙊👍
Fino fino fino fino puro talento lo felicito
Świetny naprawdę jest to pomysł pozdrawiam twórcę tego filmiku i tego kanału na RUclips 👍👍👍👍
which welding machine is this?
tig
Good idea..👍👍
Wowwww... it's a re-invented angle grinder which comes with a 250volts "sleeping-on-the-job" prevention device..!!
Great for waking you up while on the job, with a high-voltage jolt...
And here I was thinking you were going to put it on the front fork of a regular bike 🚲 in order to make an E bike 🚲 you can also pedal. But good work and idea 💡 👏 👍 👌.
Genies work it on like that
Что мне нравится у него. Чудо сварка есть а фена хотя бы какого для термоусвдки нет. Она от огня и перегрева портится.
@@philosof963 это колдовство