Shark Fin Install - INFINITI FX35 FX37 QX70
HTML-код
- Опубликовано: 6 фев 2025
- In this video Chris shows how easy it is to install a Sharkfin Antenna on your 2nd Gen FX / QX
***********************************************
Shark Fin Antenna: amzn.to/3R5wYiO
***********************************************
Instagram: @GQ37Official
Music: "Surface" by Loxbeats (No Copyright Music for Vlogs)
**This video contains affiliate links, which means I receive a small commission on a purchase without any additional cost to you, if you buy something through my links. As an Amazon Associate, I earn from qualifying purchases. If you do purchase from my links I greatly appreciate it and know that it helps keep this channel going!
Just ordered it thanks man
Great content man. Really enjoying my FX 👍🏾
Thanks, yessir this is my 3rd one and they really are special!
@@GQ37official "Sax Therapy" is my joint 👍🏾
Love my FX35 2008 SUV.
Absolutely. I restored an 08 here on the channel before I bought this one. Love them!
I have exact same car, our 3 rd one
Excellent video Brother
Thanks Will
Is that 3rd brake light on top of the tailgate OEM? I’ve never seen that before
Yep it’s OEM for my 2017 Limited.
Any idea how to fix a g35 that has the VDC Off light come on whenever the headlights are turned on ?? Also VDC button does not work ! I have after market spec d headlights that were installed by previous owner light been on ever since I got it can’t find the issue
If it was on all the time I'd say it could be low brake fluid or a cam sensor. Might want to run an OBII scanner on it just to see if any codes pop up. However, if it only comes on when your headlights are on and you don't notice any difference in driving (no cut in power etc) then it definitely sounds like a wiring issue with your headlights.
Here's a thread on other people having the issue but there's not much there as it's rare g35driver.com/forums/g35-sedan-v35-2003-06/465252-slip-light-vdc-turned-off.html
I agree with one of the commenters there that the best course is to unplug your ballasts one at a time to see if you can isolate which headlight it is that's causing it. It could be a bad ground, or whoever installed them tapped into something they shouldn't have. You can get to the ballasts / bulbs by going through the wheel wells (remove both front wheels and the plastic shields) but it's still pretty tight in there. Otherwise to remove the whole headlight you'll have to remove the front bumper. Hope that helps somewhat.
@@GQ37official I definitely have to try the the cam sensor and topping off the fluid, do you know what I should look for when I unplug the ballast , and how should I test them to see which one is causing my VDC button to not work/ stay on with lights on. My driving experience is not affected, the slip light and traction control work as normal , just no indication of the button working only when lights are flipped on, I will be subscribing also ! This is a really tricky situation hopefully I can fix it and publish this information for this rare occurrence to have a final fix solution for everyone !
@@antthonnyyy I would unplug one ballast at a time and turn on the car and see if the light stays on. If so, Plug it back in and try the other one. If it goes off with one of them unplugged you'll know which light is causing the problem and trace the wires, it could be a bad ground, it could be bad power (depending on what it's wired to) I would expect that it will be one headlight or the other, but if it stays on regardless of which one you unplug try unplugging both (both headlight ballasts unplugged) This should make it go off as this should essentially be the same as both headlights being turned off. This would still indicate some bad wiring somewhere and if you're unable to trace it then you may need to bring it to someone that's decent with wiring and has a voltage meter and can help you narrow it down.
@@GQ37official got it, I will attempt this an come back once I figure out what the exact problem is causing the VDC light to turn on and I’ll make sure I have an answer to fix this problem thank you I appreciate very hard to find tips for this problem !