I'm that guy Billy Ray. At 51 yo on Dec. 23rd, 2014 I had a horse come down on my shoulder and crush my lower back. During all the MRI's and x-rays they discovered that my spinal canal was all most closed off. A simple surgery left me paralyzed and in a wheelchair. About to reach the 8th year anniversary and they still haven't done anything for my lower back. But back in early 2015 when I couldn't get out of bed I discovered this thing called You Tube. Buckin' Billy Ray Smith was one of the first channels I subscribed to. Your attitude is infectious and for that alone is why I watch. All the saw, drums, ax hanging and tree cutting is like sprinkles on top. I always feel a little better after watching your video. Keep it up my friend and thank you for the inspiration.
I’m a 74 year old widow living in AZ. I’ve never used a chain saw but I love watching your videos. Your enthusiasm is infectious. Thank you for sharing the message of love and kindness.
Billy, I have always been the type of man that never hires a professional to do anything I can figure out on my own. Reality makes me aware of the dangers of tree felling so when I had the opportunity to drop 45 cypress I went back and watched a few more of your videos and decided to go for it. I dropped all and with wedges I was able to drop most exactly where I intended. Your videos and morality are a gem and much appreciated. Thank you for your time 🙏
Similar boat here, though definitely dropped far less than 45. Have yet to have one veer off where I don't want though, so that's the exciting point. It will happen eventually I am sure.
45 seconds in and all I can think is I wanna see a video about that truck....so nice. Also, thank you for saying to stick around and watch it through and not skip around. This was a great video!
Good morning Buckin'! Good morning from the east coast Welcome, NC. Yes, the name of our small town is "Welcome!" Anyway, new subscriber, love your channel. I am NOT a FELLER! (Hope that's how you word that) I've probably cut down a total of 10 or less trees in my life and I'm 48 years of age. However, I am a wood lover! I am a wood worker / wood artist. I design and hand make "live edge" tables and wooden wall art! I'm commenting because I am a man who likes to give credit where and when it's due. You're a good and decent man Buckin', doing what ya know and DAMN GOOD at it I have to say! But it's not just the fact that you're good at your profession, it's another factor. You're being a great role model and inspiration for a lot of people. You preach messages of kindness, professionalism, honesty and simply being a man. So, I praise you for that. The world needs more men like you. Love your part of the country, seen a lot of it when I was stationed in Bremerton, Washington while in the U.S. Navy. Good day to ya Brother!
I cut firewood for years but I haven't run a power saw in years. You looking me eye to eye on your camera and telling me I love you brother and I care about you and that love and kindness is a great option....you were just speaking to me weren't you Buckin? That is how it felt. It was personal and it hit me in the heart. Then you told me your life story and how you fought your way back and it hit me in the heart. Over and over again you have lifted my spirit.....especially on those days when I was racked with pain. You have been a force in my life that is hard to truly explain. It has been quite some time since I came across Buckin Billy Ray but I count you as a friend and I love you brother. You indeed are a woodman but I think you have just scratched the surface when you call Buckin a woodman. There is much more to this man and I DON'T BELIEVE FOR A MOMENT THAT 424,000 people are firing up their power saws every day and going for it. Folks are looking for something more.....it is a message of hope and it is one that you can share with others. That is my story and I am sticking to it. Love you my friend!
See that's the difference right there I work for a tree service I would have put a rope in that tree and pulled it over I'm just not experienced enough pounding wedges with a tree leaning like that now I do drop trees all the time with just wedges but a tree like that where they want it in a certain spot and it has a nice Lean to it and it's big I would have put a rope that's the difference bucking is a faller he's been doing them situations his whole entire life I would love to work besides somebody with his experience for a month or two just to learn a little bit more it would be amazing God bless
Yup, something like this just takes a ton of experience. You need to be able to drop a lot of trees in a place where you can afford to screw up. If I were doing this kind of work, I'd be trying to drop trees in challenging ways even when I could drop them anywhere. Then when you have to do it, it's not so scary.
I come here to gain knowledge. Watching you helps me in the wildland fire arena. Not everything directly applies, but the princples of working on and around trees are very useful when i need to push my skill level.
In my younger days, I travelled Northern Wisconsin and the UP of Michigan insuring the forest products industry. I’ve met many great stump jumpers in the early-mid 80’s. Just the smell of sawmills and logging camps is etched into my mind. But I must admit, the trees you have in the west are much larger. I’ve never seen western cedars until your videos. I subscribed just for the love of the industry. Now I’m 68 and had two pretty big (to me) trees fall in subsequent thunderstorms. They missed my tiny house by inches! God saved my house, my dog and me. Now I’m doing cleanup of the mess with a borrowed Stihl chainsaw from my pastor. It’s a bit tricky for me and I’m being as careful as I can. Your tips are very helpful. One of the trees that fell split and both halves are still attached. One side is hung in an oak while the other is lying next to my house. What scares me is the twisted half still attached and loaded, plus the half stuck in the oak.
I had to cut down a number of trees that were dying around my property. Buckin has been my go to for all the things I needed to know but didn't now I needed to know them. As I fell out of a tree trying to climb up and top one, my wife asked what I was doing and I said......Buckin showed me this one....he didn't and she didn't know what I was talking about...but I was laughing until she go the ladder and I could climb down. Keep them coming Buckin. Keep em coming.
Another lesson from the master. Awesome job again. No better way to enjoy my tea after work watching Billy at work. Fantastic job my friend. I hope the buckin army 🪖 is well. A Hugh welcome to the new folks joining a army of love, we're happy you pressed the subscribe button 🔘. love and best regards from across the pond
@@MATT.MAN-PEACE-LOVE lol neither did I until I was having lunch on one of the farm tractors while having lunch. Boy I'm sad lol. Well I'll look forward to seeing you use it lol. Tally ho over and out friend 🪖
@@BuckinBillyRaySmith Good morning Billy. As ever great hearing from you. Strange that Mrs B calls me general!!!! Yes general,,,, general nuisance lol. We All on the farm send our love, best wishes, and respect. Love to all
Hello Buckin! You're an inspiration to me. I now (at 15 almost 16) own 2 Jonsered 2071's (well one's a 2065 with a big bore) and you are one of my greatest inspirations in this journey. It's an addiction isn't it? Thanks Buckin, have a great day
Buckin my dad was a faller back in the 30-40is with crosscut saws I don't fall or nothing I'm retired now and I do love watching you the art of falling is being lost except for men like you and to everyone it is and art that's Bueatiful thanks Buckin
I love you tooooo. Ever since I lost my right eye I have given up on tree work because of depth perception, your videos give me hope as a breath of fresh air. I will never climb again so now I have to rely on ground work when falling these big fires in Northern Humboldt County California. God bless you Brother.
Billy i am not a logger i only have a Husqvarna 120 with a 14in bar and just cut small trees on my property. But i have learned alot from your videos. And just love watching you cut trees. Seeing that chip fly on the big cuts you do and the big trees fall so perfect is awesome and enjoyable to watch.
I’ve had hemlocks tops break off and the top remained in the limbs of the neighbouring trees , 6” stem . Always look up , stay safe Billy . Another interesting video , THANKS ! 👍🇨🇦
Hej there Billy I,am an Swedish Instructor on forestry machines from sweden, and your technique about how to read trees, is the same with harvesters , it,s all about "make" it simple and work with mother nature.👍
Last Week a Friend gave me a 372xpg non Xtorq as Present from 2001 with blown Cylinder. Now i do a complete Rebuild inspired of your Work with these Saws! i´m Searching for a Fullwrap but you could not get them here in Germany. Now i cant wait to get her back in business! Nice Cedar you put down!Good Job
First time commenting on your video. I'm not a logger or big time woodsman or anything like that. I've always enjoyed working with saws. But, I'm into vintage saws myself. But, you have taught me a lot about sharpening your saws. I have two saws one is a Lombard Comango and the other is a Sachs Dolmar 110. After watching your videos I have done a lot of tweaking on my saws and it has improved them both tremendously. Thank you and keep sending out videos.
You are a blessing to this 59 year old medical office manager who likes to play around with my MS 251 on the weekend, pretending I’m you, lol!!! I love watching your videos my brother!!! Thank you & keep up the great job(s)!!!
Wow!!! Thank you so much Billy!!!! What an AMAZING VIDEO!!!! I’ve fell a lot of big cedar but have never had the opportunity to watch such a video from a different perspective! God bless ya brother!
I’m nearly 53, and yes I’m not a faller, I’m a west coast boy originally from murrayville/Langley though so I really appreciate seeing this….pretty cool….and I picked up a Mac 1-51 without a carb as it turns out but what I really love is the positivity..breath of fresh air it is!! God bless! I picked up
Hey Billy. I grew up on the other end of sawdust. 81 and raised in Brooklyn NY. Not many trees in our neck of the concrete. However, as a young boy, I worked in a local butcher shop. We used sawdust everyday. It kept the floors from getting greasy to prevent slipping. We slept it away from the wall then raked it with an iron garden rake to remove any fat or garbage. We actually used a handful of sawdust to clean the maple cutting blocks in the store. We would bib it on the top of the block, let it sit for a few minutes, then we had what was called a block brush which was a wooden handle and the teeth were iron. It would scrape through the sawdust and remove any fat off the block which was absorbed into the sawdust. We would totally sweep up the sawdust twice weekly and put down fresh. Along came every agency that was going to put an end to every illness known to man. They outlawed the sawdust as well as the wooden cutting blocks. We did a lot of bone cutting with cleavers at the time and chopping on the poly boards was no going to happen. Everything with a bone then had to be cut with a bandsaw. If you look at the health of the population back then vs today, you have to laugh at the ADVANCES we have made. People are sicker and sicker, the more we advance. People do not have any resistance to anything because they have never been exposed to build that resistance. JUST SAYIN! Love the channel. Have done a fair bit of chain sawing but not much any more. Still have my STIHL 007 and 026. Love watching the pro saws, the ported and added exhausts. Would love one day to go watch a lumberjack competition. Glad you are doing well. You had a few setbacks in your life and overcame them. Who would have thunk that a lumberjack would be involved in social media? Haven’t seen Hogan for some time, hope he is doing well. Maybe one of these days I will come across a Buckin Hogan Smith channel. If you read this all, thanks. Poppy
Big ole red cedar, just waiting for you to bring it down the right way. Friends use your wedges and watch what happens. It'll go just where it needs to go. That is one big cedar. Yeah, Buckin, the science of felling a leaner. Nice job.
Great job, good explanation, beautiful cedar. You are a wedgeman of the finest caliper. Love when it gets cold outside, mosquitoes and ticks go dormant. 👍
I have no clue about what you do. My kids and I just love to see how your skill is worked. We must say you make it look easy. and we know its from years of experience. we thank you for all you do showing us the adventures.
I have dropped some fir that with the help of your videos I would have never tried. Great info I never worked in the woods when I was young. Would have loved to but never had the chance. Worked in a mill for 11 years. The wedge thing is like a super power. Thank you so much love the videos and the explanations on what is happening, from Castle Rock Wa.
Enjoy your videos! I’m 77 and my brother in law has me drop his dead trees on his property. Hayden Idaho. I’m in Sagle not far from the Canada border. You’ve been a great help in my tree cutting.
Never used a saw that big. That Husky and the similar sized Stihl sure have enough power to spare. Almost forgot, one of the best "how to's" on a leaning tree I've seen. Not just how to do it but the explanation as to why your doing it. Great stuff, Buckin'
Used to fall and did i a lot. Finally got a Husky and learned with. Built log houses from start to finish. Then dang---I ran out of timber. But I loved using the saw and watching trees go where I wanted them. Built some great houses😄. Keep on the good work bro. I am 81 now so I guess my falling days are over. But it was fun while it lasted.😅😅
Ur Awesome, Amazingly Skilled, An U Read Trees Like I've Never Seen An Truly Amazed An Impressed By. Keep Making Videos Please Keep Sharing Ur Amazing Gift. Stay Safe And Thank U So Very Much.
Growing up most folks around here used a traditional wedge. My pa would do an "upside down" wedge (humbolt) and he always said that if you wanted to keep a tree from getting hung up you better make it run off the stump. Big angles, and he would use a gap face cut on one like that to get it to pick up speed to drive through the other trees. Back then we didn't know the real names of cuts or really how to do a lot of stuff but we got things done. After I grew up I learned a lot more, and honestly I have learned a lot more stuff here on the internet, mostly how well I was taught and why a lot of it works the way it does.
First shot cutting out that notch with the tip dove in the tree somewhere. Good show. I'd have been goofing around with that for 10 minutes. I don't care what everyone says about you, Bucky - I think you're pretty OK. 😃
Method. Respect. Love of the job. Great teacher and friend. Thanks Buckin great stuff. I used to wedge Pines all the time. Nothing as big as that tree. Such a cool process.
Hey Buckin, I watched the one about squirting gas into the carb. I tried that trick and thought it didn't work, it would run and die. After a few days of this, I pulled the gas line and out came gas. I gave it a couple pulls without squirting gas and the saw started on one pull. This saw sat on the shelf for a good 20 years. Thank you for the teachings and this was my second time watching this one.
Wow thats a big tree😯 we dont see them that big in Denmark 🇩🇰 they dont grow so big as they do in Canada and usa. Great work i learn a lot from you buckin
Thank you so much. I have saved alot of energy throughout the day not to mention and my back just by watching how you maneuver and use things around you when handling the saws. For example. At the first cut you left the tip in and walked the saw around instead of pulling the saw out and packing it around with you.
hi Buckin I am a 67-year-old first-time chainsaw owner i bought it to do some work at my golf club, a few trees needed trimming and a few that were brought down by bad weather needed cutting and removed, so I needed to understand how to cut that's where you come in found you on youtube, man some of the felling I saw you do unbelievable you are a joy to watch,the lean on some of the trees you cut blow my mind, trees overhanging holmes boy how you can take that cut awesome, respect and good wishes from here in Scotland look forward to your video's stay sharp Buckin
Man would i love to spend an afternoon with this man and just soak up any and all knowledge and wisdom possible. I love the passion and the willingness to share this with us.🙏
Thanks for being you. I have followed you for many years now on and of. Now a days more again sins i hade a accident and it good too see and hear you. I got threw up when the belt chipper fall off the trailer. I smashed my head in the trailer and got a brain bleed and a neck injury. 3 months ago now and i work maby 15 hours a week now. The physical therapists said that i will be back but it will take longer time. Thanks again for making so many wonderful videos
Hello I like to wedge too I'll only tie it if my trail is to bushy really nice cutting buckin great job glad you waited for tor the widow makers to settle see you on the next next one thank you
B . . . You're a brother in the greatest way. What you do is just amazing... I can't enjoy or learn cuz I'm so not into working/falling trees... But that you are is the greatest!!!
Around 96,I did tree service in NJ,I love the memories,I'm willing to do it again, the biggest was oak, using a crain,,one of my coworkers almost lost a leg,
Just found your RUclips channel. You were recommended to me by a Welsh Wizard. Really enjoying watching your skills and great video content. Thank you.
Brother Buckin, thank you! The wedges in the crease makes perfect sense, the grain is denser there! Our shagbark cedars are very similar in that they break like glass, but if the stump is four feet it's only that big for five feet or so lol. Thanks Billy Ray, every episode is appreciated by me and my family!
I love your channel, I love soaking up the knowledge of your experience, and I love the sound of your saws, it's therapy for me when I'm all stressed out 😊
That axe around the 5 to 6 min mark looks kinda like a Omish handle or a really old school job to myself. Really enjoy these videos. Thanks again and keep it up
I am Almost 66 and I have cut big trees since I was 16 yrs old . I also was a climbing topping and tree faller . I enjoy doing. It all still . I also watch your videos to pickup pointers
I cut a dead ash recently where the undercut closed up, and the tree got caught in the canopy of other trees and stayed stuck on the stump. That was a hassle! Opening up the undercut wider like you taught would have prevented my problem. Great stuff. thanks JP
I seen Bjarne Butler was running a 592 from walkers. Do you cross paths with Bjarne. What a great attitude from a guy that looks like he is having a blast in the Bush
Bjarne would like to do a vid with bucking well atleast I heard him talk about in one of his vids. Tbh tho I wonder if Logan would run into him since he goin out to camps nowadays .
Thanks to your videos I was comfortable falling a neighbors tree right next to the house which had a nice back lean and used wedges and it landed exactly where i asked it to, so much gratitude for what you share as I only bought my first 3 saws this year and the amount of knowledge ive gained from your channel is incredible!
I'm that guy Billy Ray. At 51 yo on Dec. 23rd, 2014 I had a horse come down on my shoulder and crush my lower back. During all the MRI's and x-rays they discovered that my spinal canal was all most closed off. A simple surgery left me paralyzed and in a wheelchair. About to reach the 8th year anniversary and they still haven't done anything for my lower back. But back in early 2015 when I couldn't get out of bed I discovered this thing called You Tube. Buckin' Billy Ray Smith was one of the first channels I subscribed to. Your attitude is infectious and for that alone is why I watch. All the saw, drums, ax hanging and tree cutting is like sprinkles on top. I always feel a little better after watching your video. Keep it up my friend and thank you for the inspiration.
praying for you brother . God bless 🙏
I’m a 74 year old widow living in AZ. I’ve never used a chain saw but I love watching your videos. Your enthusiasm is infectious. Thank you for sharing the message of love and kindness.
That's Billy's genius....even non-cutters like his stuff. Awesome that you do!
Wished I could hit the thumbs up more than once for your comment! I saw wood. However Billy is infectious in the best ways!!
Not a whole lot of need for a chainsaw in AZ. lol. Unless youre fellin some cactus
I’m 65 and a dropped wood on the west coast ❤ you have showed me quite a few tricks and you bring back fun memories. Love you brother 👍
He has alot of cool tools in his brain when it comes to felling trees and it's awesome that he shares them with anyone 😀.
@@joshuajohnson4396that’s the way it should be
I remember you getting all the wood getting dropped on you at that CCBC trip.
More cow bell 🔔
I’m 46 and dropped brown a few minutes ago
I'm one of those People...I watch because I appreciate you as a Human...The content is a bonus. Keep on keeping on...
Billy, I have always been the type of man that never hires a professional to do anything I can figure out on my own. Reality makes me aware of the dangers of tree felling so when I had the opportunity to drop 45 cypress I went back and watched a few more of your videos and decided to go for it. I dropped all and with wedges I was able to drop most exactly where I intended. Your videos and morality are a gem and much appreciated. Thank you for your time 🙏
Good stuff thx friend
Similar boat here, though definitely dropped far less than 45.
Have yet to have one veer off where I don't want though, so that's the exciting point.
It will happen eventually I am sure.
I just got the 592xp! - watching my hero use it, is a dream come true ! Keep on buckin!
You're like an old tree yourself Buckin'. Full of knowledge, wisdom and all ways growing.
Another great video, thank you.
kool words friend
As someone who fixes electrical stuff, watching you bang wedges and make sawdust is a welcome change of pace. Be blessed.
45 seconds in and all I can think is I wanna see a video about that truck....so nice. Also, thank you for saying to stick around and watch it through and not skip around. This was a great video!
Buckin, the world is a better place because you're in it my friend.
Take care....
Good morning Buckin'! Good morning from the east coast Welcome, NC. Yes, the name of our small town is "Welcome!" Anyway, new subscriber, love your channel. I am NOT a FELLER! (Hope that's how you word that) I've probably cut down a total of 10 or less trees in my life and I'm 48 years of age. However, I am a wood lover! I am a wood worker / wood artist. I design and hand make "live edge" tables and wooden wall art! I'm commenting because I am a man who likes to give credit where and when it's due. You're a good and decent man Buckin', doing what ya know and DAMN GOOD at it I have to say! But it's not just the fact that you're good at your profession, it's another factor. You're being a great role model and inspiration for a lot of people. You preach messages of kindness, professionalism, honesty and simply being a man. So, I praise you for that. The world needs more men like you. Love your part of the country, seen a lot of it when I was stationed in Bremerton, Washington while in the U.S. Navy.
Good day to ya Brother!
The wedge banging accuracy at 2:20-2:30 is impeccable! Top, bottom, top, bottom
I cut firewood for years but I haven't run a power saw in years. You looking me eye to eye on your camera and telling me I love you brother and I care about you and that love and kindness is a great option....you were just speaking to me weren't you Buckin? That is how it felt. It was personal and it hit me in the heart. Then you told me your life story and how you fought your way back and it hit me in the heart. Over and over again you have lifted my spirit.....especially on those days when I was racked with pain. You have been a force in my life that is hard to truly explain. It has been quite some time since I came across Buckin Billy Ray but I count you as a friend and I love you brother. You indeed are a woodman but I think you have just scratched the surface when you call Buckin a woodman. There is much more to this man and I DON'T BELIEVE FOR A MOMENT THAT 424,000 people are firing up their power saws every day and going for it. Folks are looking for something more.....it is a message of hope and it is one that you can share with others. That is my story and I am sticking to it. Love you my friend!
nice of you Tom
I have run a Husky for years and always love to see them in action! Always Great to hear the Life messages!
See that's the difference right there I work for a tree service I would have put a rope in that tree and pulled it over I'm just not experienced enough pounding wedges with a tree leaning like that now I do drop trees all the time with just wedges but a tree like that where they want it in a certain spot and it has a nice Lean to it and it's big I would have put a rope that's the difference bucking is a faller he's been doing them situations his whole entire life I would love to work besides somebody with his experience for a month or two just to learn a little bit more it would be amazing God bless
Ilove you're show very much very educational
You are the man , DAWG !!!!!!!
You gotta learn to do it all, only then shall you be... Superb.
He has something beyond training, beyond experience. He's got balls. No other word for it. 😂
Yup, something like this just takes a ton of experience. You need to be able to drop a lot of trees in a place where you can afford to screw up. If I were doing this kind of work, I'd be trying to drop trees in challenging ways even when I could drop them anywhere. Then when you have to do it, it's not so scary.
I come here to gain knowledge. Watching you helps me in the wildland fire arena. Not everything directly applies, but the princples of working on and around trees are very useful when i need to push my skill level.
Been wanting to see you try a 592 for awhile! 💪 love you brother! ✊
In my younger days, I travelled Northern Wisconsin and the UP of Michigan insuring the forest products industry. I’ve met many great stump jumpers in the early-mid 80’s. Just the smell of sawmills and logging camps is etched into my mind. But I must admit, the trees you have in the west are much larger. I’ve never seen western cedars until your videos. I subscribed just for the love of the industry. Now I’m 68 and had two pretty big (to me) trees fall in subsequent thunderstorms. They missed my tiny house by inches! God saved my house, my dog and me.
Now I’m doing cleanup of the mess with a borrowed Stihl chainsaw from my pastor. It’s a bit tricky for me and I’m being as careful as I can. Your tips are very helpful. One of the trees that fell split and both halves are still attached. One side is hung in an oak while the other is lying next to my house. What scares me is the twisted half still attached and loaded, plus the half stuck in the oak.
I had to cut down a number of trees that were dying around my property. Buckin has been my go to for all the things I needed to know but didn't now I needed to know them. As I fell out of a tree trying to climb up and top one, my wife asked what I was doing and I said......Buckin showed me this one....he didn't and she didn't know what I was talking about...but I was laughing until she go the ladder and I could climb down. Keep them coming Buckin. Keep em coming.
Another lesson from the master. Awesome job again. No better way to enjoy my tea after work watching Billy at work. Fantastic job my friend. I hope the buckin army 🪖 is well. A Hugh welcome to the new folks joining a army of love, we're happy you pressed the subscribe button 🔘. love and best regards from across the pond
General Brook . love to the farm
@@MATT.MAN-PEACE-LOVE lol neither did I until I was having lunch on one of the farm tractors while having lunch. Boy I'm sad lol. Well I'll look forward to seeing you use it lol. Tally ho over and out friend 🪖
@@BuckinBillyRaySmith Good morning Billy. As ever great hearing from you. Strange that Mrs B calls me general!!!! Yes general,,,, general nuisance lol. We All on the farm send our love, best wishes, and respect. Love to all
Love the jazz! My logger Dad (from Oregon) blows his nose just like you do. Or maybe you do it like he does. He will be 80 years old on Monday!
spend all the time you can with him , i he logged Pic his brain on boots , Power saws , axes , and what they called things back then
OK I'll be back. Love ya brother keep the message coming, thanks again for introducing me to this community.
You always seem to have good videos, and teaching techniques. Keep doing it, and stay safe.
Billy Ray, I'm one of those guy's that has never fell a tree and probably never will. I just love listening to you and watching you work, SAFELY!
Man, that truck is beautiful. Brought a tear to my eye. Reminds me of my fathers old truck.
Hello Buckin! You're an inspiration to me. I now (at 15 almost 16) own 2 Jonsered 2071's (well one's a 2065 with a big bore) and you are one of my greatest inspirations in this journey. It's an addiction isn't it? Thanks Buckin, have a great day
jonsereds are great saws.
Awesome saws bro
It's nice to see a young man watching a good role modle ! Good luck in your endeavors!
I had a pi.e of reds they was good saws !
Cool, sounds pretty similar to me, 15 work in firewood, and got a garage full of husky’s stilhls a Mac and a Jred 2165 big bore awesome 👍
Buckin my dad was a faller back in the 30-40is with crosscut saws I don't fall or nothing I'm retired now and I do love watching you the art of falling is being lost except for men like you and to everyone it is and art that's Bueatiful thanks Buckin
when you came out the other side on that undercut. that was the most satisfying for me. PURE SKILL
I love you tooooo.
Ever since I lost my right eye I have given up on tree work because of depth perception, your videos give me hope as a breath of fresh air. I will never climb again so now I have to rely on ground work when falling these big fires in Northern Humboldt County California.
God bless you Brother.
You are truly an inspiration in what you do and how you live.
Billy i am not a logger i only have a Husqvarna 120 with a 14in bar and just cut small trees on my property. But i have learned alot from your videos. And just love watching you cut trees. Seeing that chip fly on the big cuts you do and the big trees fall so perfect is awesome and enjoyable to watch.
I’ve had hemlocks tops break off and the top remained in the limbs of the neighbouring trees , 6” stem . Always look up , stay safe Billy . Another interesting video , THANKS ! 👍🇨🇦
Hej there Billy I,am an Swedish Instructor on forestry machines from sweden, and your technique about how to read trees, is the same with harvesters , it,s all about "make" it simple and work with mother nature.👍
welcome Lars ,
Love your videos Billy👍👍been felling trees for 30yrs and ur never to old to learn. THANKS BILLY👍👍👍👏👏👏✌️✌️
Great job cutting the tree down you do awesome work I enjoy your videos I watch every single one 😋
Last Week a Friend gave me a 372xpg non Xtorq as Present from 2001 with blown Cylinder. Now i do a complete Rebuild inspired of your Work with these Saws! i´m Searching for a Fullwrap but you could not get them here in Germany. Now i cant wait to get her back in business! Nice Cedar you put down!Good Job
I've been watching this channel on and off for about 6yrs.This guy is the real deal.And I have learned a lot.
You do a great job explaining how and why. When do what you do. I enjoy watching your videos
First time commenting on your video. I'm not a logger or big time woodsman or anything like that. I've always enjoyed working with saws. But, I'm into vintage saws myself. But, you have taught me a lot about sharpening your saws. I have two saws one is a Lombard Comango and the other is a Sachs Dolmar 110. After watching your videos I have done a lot of tweaking on my saws and it has improved them both tremendously. Thank you and keep sending out videos.
You are a blessing to this 59 year old medical office manager who likes to play around with my MS 251 on the weekend, pretending I’m you, lol!!! I love watching your videos my brother!!! Thank you & keep up the great job(s)!!!
Ronnie yer humility is refreshing brother . thx for being active with us
I am 67 and have a tree to cut that is danger of falling on my trailer. I have been watching your videos for training and confidence!
And I have been learning a lot! Thank you for the time you put in on these videos!
Wow!!! Thank you so much Billy!!!! What an AMAZING VIDEO!!!! I’ve fell a lot of big cedar but have never had the opportunity to watch such a video from a different perspective! God bless ya brother!
I’m nearly 53, and yes I’m not a faller, I’m a west coast boy originally from murrayville/Langley though so I really appreciate seeing this….pretty cool….and I picked up a Mac 1-51 without a carb as it turns out but what I really love is the positivity..breath of fresh air it is!! God bless!
I picked up
Hey Billy. I grew up on the other end of sawdust. 81 and raised in Brooklyn NY. Not many trees in our neck of the concrete. However, as a young boy, I worked in a local butcher shop. We used sawdust everyday. It kept the floors from getting greasy to prevent slipping. We slept it away from the wall then raked it with an iron garden rake to remove any fat or garbage. We actually used a handful of sawdust to clean the maple cutting blocks in the store. We would bib it on the top of the block, let it sit for a few minutes, then we had what was called a block brush which was a wooden handle and the teeth were iron. It would scrape through the sawdust and remove any fat off the block which was absorbed into the sawdust. We would totally sweep up the sawdust twice weekly and put down fresh. Along came every agency that was going to put an end to every illness known to man. They outlawed the sawdust as well as the wooden cutting blocks. We did a lot of bone cutting with cleavers at the time and chopping on the poly boards was no going to happen. Everything with a bone then had to be cut with a bandsaw. If you look at the health of the population back then vs today, you have to laugh at the ADVANCES we have made. People are sicker and sicker, the more we advance. People do not have any resistance to anything because they have never been exposed to build that resistance. JUST SAYIN! Love the channel. Have done a fair bit of chain sawing but not much any more. Still have my STIHL 007 and 026. Love watching the pro saws, the ported and added exhausts. Would love one day to go watch a lumberjack competition. Glad you are doing well. You had a few setbacks in your life and overcame them. Who would have thunk that a lumberjack would be involved in social media? Haven’t seen Hogan for some time, hope he is doing well. Maybe one of these days I will come across a Buckin Hogan Smith channel. If you read this all, thanks. Poppy
76 here and cut up a lot of fire wood this week. Ready to split and stack more tomorrow. Love my Stihl 500 i . Wheee!
Big ole red cedar, just waiting for you to bring it down the right way. Friends use your wedges and watch what happens. It'll go just where it needs to go. That is one big cedar. Yeah, Buckin, the science of felling a leaner. Nice job.
Good day Buckster. The 592 is a beast. Power in the hands. Nice shot on the biggun !
Take care.
Great job, good explanation, beautiful cedar.
You are a wedgeman of the finest caliper.
Love when it gets cold outside, mosquitoes and ticks go dormant. 👍
Right! And not so much sweat running into your eyes!
I have no clue about what you do. My kids and I just love to see how your skill is worked. We must say you make it look easy. and we know its from years of experience. we thank you for all you do showing us the adventures.
I have dropped some fir that with the help of your videos I would have never tried. Great info I never worked in the woods when I was young. Would have loved to but never had the chance. Worked in a mill for 11 years. The wedge thing is like a super power. Thank you so much love the videos and the explanations on what is happening, from Castle Rock Wa.
Gad Day from Australia Your gratitude for all your love on this Journey that you share with Us arm chair Woods Man Namaste
I heard it pop. I am still running the other way. I really like the time you stop and teach. Quite enjoyable. Cya john
Enjoy your videos! I’m 77 and my brother in law has me drop his dead trees on his property. Hayden Idaho. I’m in Sagle not far from the Canada border. You’ve been a great help in my tree cutting.
Never used a saw that big. That Husky and the similar sized Stihl sure have enough power to spare. Almost forgot, one of the best "how to's" on a leaning tree I've seen. Not just how to do it but the explanation as to why your doing it. Great stuff, Buckin'
No one else on RUclips makes you feel like you are right there with them more than Mr. BBR!
Love you all...❤❤❤
Lieutenant Bradley
I love you johnny
North of England calling and SO pleased to see that integrity is still alive Mr Smith!! Thankyou sir. 👍👍👌
Used to fall and did i a lot. Finally got a Husky and learned with. Built log houses from start to finish. Then dang---I ran out of timber. But I loved using the saw and watching trees
go where I wanted them. Built some great houses😄. Keep on the good work bro. I am 81 now so I guess my falling days are over. But it was fun while it lasted.😅😅
Ur Awesome, Amazingly Skilled, An U Read Trees Like I've Never Seen An Truly Amazed An Impressed By. Keep Making Videos Please Keep Sharing Ur Amazing Gift. Stay Safe And Thank U So Very Much.
Yeah Buddy!! I'm a 71+ woodturner and carver. Love looking into wood and everything about it. Like all your videos.
Growing up most folks around here used a traditional wedge. My pa would do an "upside down" wedge (humbolt) and he always said that if you wanted to keep a tree from getting hung up you better make it run off the stump. Big angles, and he would use a gap face cut on one like that to get it to pick up speed to drive through the other trees. Back then we didn't know the real names of cuts or really how to do a lot of stuff but we got things done. After I grew up I learned a lot more, and honestly I have learned a lot more stuff here on the internet, mostly how well I was taught and why a lot of it works the way it does.
Don’t even own a saw, but have always enjoyed watching a skilled person do a good job.
Nice straightforward easy peasy cutting on this one Buck. Love my Jonsered 2188.
First shot cutting out that notch with the tip dove in the tree somewhere. Good show. I'd have been goofing around with that for 10 minutes. I don't care what everyone says about you, Bucky - I think you're pretty OK. 😃
Thanks for the wedge tips, the way you think through was worth the watch. And I am 72 and still banging wedges in No. California. Thanks, Buckin.
I’m one of those guys that doesn’t run a saw or swing axes. I’m here for the message. Daily
Good morning Buckin, GREAT JOB, 👍 👍👍. Love to see things come out on the good side. Have a blessed day. See you on the next video. Love to all.
yes you wil .. love ya terry
Method. Respect. Love of the job. Great teacher and friend. Thanks Buckin great stuff. I used to wedge Pines all the time. Nothing as big as that tree. Such a cool process.
Hey Buckin, I watched the one about squirting gas into the carb. I tried that trick and thought it didn't work, it would run and die. After a few days of this, I pulled the gas line and out came gas. I gave it a couple pulls without squirting gas and the saw started on one pull. This saw sat on the shelf for a good 20 years. Thank you for the teachings and this was my second time watching this one.
I'm always here for the message Buckin, and I'm a hybrid Tree man and Faller. You are what you believe you are, manifest it!!! Good on ya my friend
Wow thats a big tree😯 we dont see them that big in Denmark 🇩🇰 they dont grow so big as they do in Canada and usa. Great work i learn a lot from you buckin
Thank you so much. I have saved alot of energy throughout the day not to mention and my back just by watching how you maneuver and use things around you when handling the saws.
For example. At the first cut you left the tip in and walked the saw around instead of pulling the saw out and packing it around with you.
hi Buckin I am a 67-year-old first-time chainsaw owner i bought it to do some work at my golf club, a few trees needed trimming and a few that were brought down by bad weather needed cutting and removed, so I needed to understand how to cut that's where you come in found you on youtube, man some of the felling I saw you do unbelievable you are a joy to watch,the lean on some of the trees you cut blow my mind, trees overhanging holmes boy how you can take that cut awesome, respect and good wishes from here in Scotland look forward to your video's stay sharp Buckin
Man would i love to spend an afternoon with this man and just soak up any and all knowledge and wisdom possible. I love the passion and the willingness to share this with us.🙏
A dream of mine
That's a sick Ford! Good to hear Donny is still at it, I'm a south island guy, wish we had as good a saw builder down here
This intro with the jazz music is the best you've ever done.
Thanks for being you. I have followed you for many years now on and of. Now a days more again sins i hade a accident and it good too see and hear you. I got threw up when the belt chipper fall off the trailer. I smashed my head in the trailer and got a brain bleed and a neck injury. 3 months ago now and i work maby 15 hours a week now.
The physical therapists said that i will be back but it will take longer time.
Thanks again for making so many wonderful videos
Hello I like to wedge too I'll only tie it if my trail is to bushy really nice cutting buckin great job glad you waited for tor the widow makers to settle see you on the next next one thank you
B . . . You're a brother in the greatest way.
What you do is just amazing...
I can't enjoy or learn cuz I'm so not into working/falling trees...
But that you are is the greatest!!!
What an awesome video. You Buckin are one professional faller. I enjoy watching you work. Great job you did on that tree. ❤️👍
Buckin, you damn good. There’s a lot more to dropping trees than I ever realized. Thanks for the show.
I love you buckin you bring happiness to my days every day ❤️ I miss seeing videos of you and your son working together
Around 96,I did tree service in NJ,I love the memories,I'm willing to do it again, the biggest was oak, using a crain,,one of my coworkers almost lost a leg,
Just found your RUclips channel. You were recommended to me by a Welsh Wizard. Really enjoying watching your skills and great video content. Thank you.
Brother Buckin, thank you! The wedges in the crease makes perfect sense, the grain is denser there! Our shagbark cedars are very similar in that they break like glass, but if the stump is four feet it's only that big for five feet or so lol. Thanks Billy Ray, every episode is appreciated by me and my family!
Companies today make way, way more money selling crap that doesn’t last at outrageous prices. Thanks BBR, your videos are great! ❤👍
Billy, you do a great job! I enjoy all your videos! It's a treat to watch a hard worker!!
I love your channel, I love soaking up the knowledge of your experience, and I love the sound of your saws, it's therapy for me when I'm all stressed out 😊
What a smooth face cut my guy. You make it look so effortless, absolutely beautiful!
Thanks about letting us know we’re and why you put the wedges we’re you do it’s so helpful and I feel safer trying them now
Watching your videos from France 🇫🇷
Just love them !!!🤟🏼🔥
That axe around the 5 to 6 min mark looks kinda like a Omish handle or a really old school job to myself. Really enjoy these videos. Thanks again and keep it up
I am Almost 66 and I have cut big trees since I was 16 yrs old . I also was a climbing topping and tree faller . I enjoy doing. It all still . I also watch your videos to pickup pointers
This video had "I need this" all over it. Thank you Billy.
That was absolutely the coolest thing you shook the entire woods :) I LOVE YA BUCKIN 🌲🌲🌲🌲🌲
The Tatman's Love you from Glenville, WV!!!! Keep posting. When I can't sleep you are my go to calming friend!!! Love yah Buddy!!!
I cut a dead ash recently where the undercut closed up, and the tree got caught in the canopy of other trees and stayed stuck on the stump. That was a hassle! Opening up the undercut wider like you taught would have prevented my problem. Great stuff. thanks
JP
My father in law RIP, comes and seem me in dream... Looking at your trade. thank you for letting him with your content! Merci!
I have Ben watching you since I was 5 I'm 12 now
I seen Bjarne Butler was running a 592 from walkers. Do you cross paths with Bjarne. What a great attitude from a guy that looks like he is having a blast in the Bush
Bjarne would like to do a vid with bucking well atleast I heard him talk about in one of his vids. Tbh tho I wonder if Logan would run into him since he goin out to camps nowadays .
Thanks to your videos I was comfortable falling a neighbors tree right next to the house which had a nice back lean and used wedges and it landed exactly where i asked it to, so much gratitude for what you share as I only bought my first 3 saws this year and the amount of knowledge ive gained from your channel is incredible!
Good job buckin you fawkin legend