🔥I released an album of music you can listen to free! Let me know what you think! 👉 open.spotify.com/artist/1VOVKFOF2gmaiZysdVug2I?si=HUEvBHVzSDKfoayWUNO4vQ
As a fellow DIY'er, one thing I've learned is there really isn't a mistake that can't be corrected. It's just a matter of accepting it and taking the time to fix the mistake.
Just showed this video to the wife. She just sighed and walked away. Still, I didn't hear an explicit "no", so looks like I've a project for the summer, boys! Thanks again, Haxman
The perfect amount of humor to keep me engaged, the unedited mistakes, the narration explaining the process, and the logic behind decisions made all helped me thoroughly enjoy this video and subscribe for more in the future.
I worked in construction in the 80s and I recall an on-site engineer that always watched as we poured concrete. I asked him why? He made sure the concrete workers vibrated the mix properly. There's not a lot of strength in bubbles was his reasoning. I've always remembered that.
@austinatkins408 true speaking, I have seen some bad segregation from over-vibrating the slurry. End up with severe honeycombing on the lower portion of the pour.
You can also use a short piece of rebar to "rod" the concrete mixture and consolidate it to get the air bubbles up to the surface. Similar to "rodding" a test cylinder.
For real. I learn on my own and do my projects on my own. When I see someone successfully completing projects while breaking parts and buying tools which don't get used. I genuinely feel like less of a failure.
To be 100% honest. I only clicked video out of pure curiosity of how you were going to separate the foam from the concrete. Watched whole video. Learned a lot. Thank you. ❤
I worked at a rehab facility that thought it would be awesome to take a commercial 6' concrete planter and turn it into a firepit for the residents to have bonfires around during their nightly check-ins. It was pretty awesome for the first few nights, but on the third or fourth night they used it, the damn thing exploded and sent cinders, sharp chunks of concrete, and burning wood flying everywhere. Turns out that, even with proper agitation, concrete is still a very porous substance. Air expands when heated, which could turn your fire pit into a time bomb. This becomes even more likely with repeated heating and cooling. It's why refractories tend to be built with ceramic substrates and not concrete.
This one will probably do okay because of the airflow between the metal and concrete keeping the concrete cool. But yeah, concrete also soaks up water, and when water turns to steam, you get ker-blewy.
The bursting isn't primarily about the bubbles. When concrete hardens, much of the water you mixed it with is chemically bound into the new crystals that are formed. The concrete can be bone dry years later, but that water remains part of it. When it gets very hot, it changes chemically, and the water is freed up. The trouble is, it's inside concrete, so it cant expand, and thus it can get extremely hot without becoming steam. But when the solid matrix cracks, it suddenly releases all that pressure at once and bang.
This is what life is all about. Creating projects, family, and the land to do as you please. Literally found this channel this morning and binge wathed 6 already and subbed. Love it dude keep rocking!!
ALSO ALSO pro tip.... WAIT AT LEAST 20 days BEFORE BURING A FIRE! There is a lot of water still free in the concrete and it is possible to create bad cracks! ALSO ALSO.... keep it wet for 7 days... spraying it with water and covering with plastic. Anyways.... just concrete things.
Not an urban myth!! I have pictures to prove it. The metal liner and gap behind it offered enough protection here which is a good thing but it is 100% guaranteed that green concrete explodes if the moisture turns to steam and I mean explode in a dangerous way. It takes about five beers long after the fire gets cooking. We were lucky.
Good stuff all round. Great content worth learning to try at home-and great humor as well. Also like the fact that there's no cussing, no metal or "rap almost music" to deal with. 👍
I did a smokeless fire pit conversion to an already existing pit at a house I bought a few years ago. Did almost the same exact thing you did, I just didn’t have to build the walls. Used a galvanized ring, drilled the holes and set it in the middle with a gap for the outer chamber. Then did the capstones using the same technique, just used melamine board for my form instead of foam board. I only made one form and used it for four pours to give me 4 capstones. Used a bit of old motor oil for my release agent, and added coloring to match the existing walls of the pit that had been already done with landscape blocks. Color matching was the toughest part of the project! It turned out great and works awesome. If I had done the whole thing from scratch, I would have just made the whole thing a bit smaller. Having a 3’ diameter inner ring means you need to make big fires (as you mentioned) and it takes a little while to heat up for the smokeless effect to occur. That’s probably why the commercial ones are fairly small as well. You earned a subscriber, as your rolling storage system has been on my list of stuff as well, just instead of strut channel and trolleys, I had planned to utilize barn door track and rollers instead. Like minds think alike, and I look forward to watching your other builds instead of filming any of my own, lol.
Thank for not editing your mistakes. It’s so much more educating. Great Video; a project I’d like to tackle one day. (Ironically I did edit this comment 😅)
Awesome for hotter climates. I like a firepit for warmth when it's cool and that's always been my issue with the smokeless pits because there's very little radiant heat if you're siting beside it. Cool none the less!
a dog walks into a telegraph office to send a message. the person there asks the dog what they want their message to say. the dog goes "woof woof woof woof woof woof woof woof woof" the person working there says to the dog "that's only 9 words, did you want to include 1 more word? it would be free" the dog replies "no that wouldn't make any sense"
I like mixing my cement a bit wet when I pour. It's a lot easier to work the voids out of the concrete when doing something like this. Great video man! Thanks.
Not sure if it was mentioned, but rock salt is a great way to add texture. Just sprinkle a little in the form sparingly, and it dissolves later. It can also be added when finishing a sidewalk, just sprinkle some on the concrete before it sets up too hard, and trowel it into the surface. Great video.
@@benholler1389 It's only bad for the concrete if you constantly let salt into the the pores through freeze and thaw cycles. So your comment is partially correct. The salt used for this texture technique is rinsed out as soon as the concrete is hard enough to handle a spray nozzle, and is used sparingly for a random texture. My parents have 40 year old walk ways that I helped my dad pour as a little kid, using the rock salt method, that still look like new to this day. Granted, I'm not a fan of textured concrete... I prefer a broom pass so light that you can hardly tell it was done.
Love that you don't edit out your mistakes, definitely subscribing. Wife made the mistake of giving me the clear to do whatever I wanted to the backyard...so this is definitely in the cards haha
Quote " Probably one of my favourite tools I've gotten Over the past serval years" Seconds early, haxman wife was helping. Honestly thought he meant his wife. haha She is trooper for being that support hats off!
I FRIGGING love that you put in your mistakes because all of us watching YT are DIY’ing everything and will learn from your mistakes!! Others cut it out of the video and are not honest, IMO. So kudos!! 🥳🥳🥳 Thank you. 🙏🏼
One of the easiest and stupidly brilliant pseudo concrete vibrators I'd ever seen whipped together was an oscillating cutter with a pipe strapped to it. Sink the pipe with it on, goes in like hot butter. I wish I'd come up with that one! I've also picked up an industrial vibrating head for various projects that can be had for like $35 and use metal worm clamps to put all kinds of things under Serious vibrational power. I have one mounted to a stainless thermos with 1,000 5/8ths ball bearings in it for grinding hard media into powder. Murphy's Soap in the huge jugs also works great as a release agent for molding, and you can let it dry and build up layers if you want, or just slather it on and pour. Last time I bought it I believe was 2022 and it was $6 at the hardware store. The only thing I'd address would be drainage, particularly in areas with more clay in the soil than average. You can use PEX tubing and cast them directly into the concrete and run them wherever convenient or pull it after the concrete cures and shrinks off the surface some. It helps a lot with premature rusting of the inner ring so runoff doesn't pool up in the bottom. I'm definitely going to borrow that all-thread trick next time though. So we're even. 😉
Can you explain a bit more about exactly how you'd attach the pipe to the sawzall to use it as a concrete vibrator? I can't seem to figure out what you mean 😅
I love it. Can't believe it's been 3 years already. I've always called those tape measures as sewing tapes', but I think they are actually called "Tailors tape" because if you google search that name a butt-ton of results come up.
You sir, are the man! I have been planning to build 3 gas fire pits in my backyard (yep, that is a long story) your instruction, expertise and ahem humor will turn my dream into a reality! Thank you. I have subscribed. Yours is the first you tube thing that I have ever subscribed to, only took me 63 years. (Hope I did it right). Iam a BIG FAN. Most respectfully, mike USN ret.
I would advise against that. You're not really supposed to make fire pits, grills or smokers out of concrete. You need fire bricks, they're made of ceramic and they are designed for this application. They're used in kilns, fire boxes, diy fire pits and smokers. You don't want to mess around when gas lines are involved, concrete can explode which could create a very dangerous situation.
I knew it - when you didn’t show the application of your release agent, you forgot it 😂 God bless you and your wife! What a trip. Gonna show this to my husband. We move from the burbs to 3 acres in a few months. Smokeless fire pit is gonna be ideal this holiday season! 😁
Also...THANKS for leaving the bloopers in...they are what make your channel so relatable. Most you tubers would have easily edited out the bloopers and disguised the real world challenges.
I had to chuckle. A true DIY’er! Stuff happens, but the goal doesn’t change. I’m sure there will never be those who critique the build, but I’m one to applaud the perseverance. This is a short but sweet vid and I’m going to add this to my list of what I need to do this year. My original fire pit was made from those big box pavers, and while it took a couple hours to build, it looks like…well, let’s just say it looks like a big box build. Many have them. I want different. I need to remember to keep that seed oil handy for my release agent! Very good job.
I know it’s frustrating but I appreciate you showing when things don’t work out as you expect. So many RUclips vids show perfect outcomes every time, which is disheartening for novices. By you showing realistic results makes me more apt to try things
Concrete does not hold up well to high heat. If you don't believe me. Take a torch to it and I hope you have your PPE on. With that said this might work because it doesn't let the concrete to get that hot (unlike standard fire pit). I will stay tuned for the results.
I made a video about this actually on the first pit. The sides are protected by the fire ring. The top doesn’t get hot enough to be affected. As long as you don’t light a fire right after a huge rainfall there are no issues. I deliberately tried to crack the original pit I built with heat and couldn’t do it. You are correct about heat and concrete. If you made a fire directly on concrete that would be a problem.
@@HAXMAN Hey mate, I've seen concrete explode, The fire was actually lit on the slab, it really does go off...!! I'm pretty sure you can get concrete that's better suited to heat...
the problem with polystyrene (compared to wood) is that it takes in excess of 500 years to breakdown..and recycling of it is rare...whereas 1/8" ply and 1/4" ply can break down in less than 15 years..we stopped using it for construction for this reason and have gone to using 1/8" and 1/4" for forming
I appreciate your SUCCESS/FAILURE, your SORROW/JOY, and that you are showing this along the way to the really sharp projects that you do. It has a better feel than the slick productions that have the viewers feeling unworthy! I am working on my smoosh technique - to be gentle.
I love the video. Very informative and entertaining as well. I will mention concrete poisoning is a real thing and everyone’s tolerance is different. Always a safe practice to wear some type of glove while getting your hands on wet concrete. Just saying.
The best gift my brother ever gave me, 36" oil field pipe casing, I'll be dead and my grandkids would be dead before it wears out, but trying to get a piece of 36" casing is like finding gold, unless you know a welder who works on pipeline and can get you a piece!
I’ve found a better way of vibrating the bubbles out. Attach a piece of pvc pipe on an oscillating tool. Screw it on an old blade. Stick it into the cement and turn the tool on high. Works better than the reciprocating saw.
Sonatubes work great too man. Get a 3' and 4' sonatube and cut whatever height you want. We use them all the time on firepits. We actually take fire brick and ratchet strap them to the inside piece and the concrete locks it all in once concrete is poured.
@jellman101 not if you do a bunch of them and cut them to whatever height you want. We do quite a few custom firepits and as with most companies labor is our biggest expense. You can't really mess up sonatubes they are done, kick it off, strap your fire brick to inside, pour and you're done other than carving or rock work. Every company is different. If you don't have many employees and don't do many of these in a year then you're 100% right
Seeing this & saying _"I'm definitely going to do that!._ Then realizing I don't have the time, tools, skills, or patience to make that by myself! 😂😢 That was still impressive & entertaining! Great job. 👌
If you type in your diameter in inches on the construction master calculator and hit the circle button it will give you the circumference as well. Built in short cuts. Invaluable tool that keeps me efficient on the job site. Love your work.
I like how you routinely mix your concrete too dry, despite knowing better. I too enjoy underfilling my tractor tires, waiting too long to mow the lawn, and under-buying lumber for my next project.
Dude, ur hilarious. The videos are great. But the occassional self jab, or timely quips are priceless. Just subscribed. I'm looking forward to checking out all ur content. Excellent video.
One fantastic project. I have seen a video where the man cut a 2 foot 1/2 inch pvc pipe and duct taped to the reciprocated saw and stocked into the concrete form for smother finish. Well done
PLEASE wear a respirator when you play with concrete!!! Concrete dust is silica...which is glass...which means you're breathing tiny shards of glass. Silicosis is a very real thing!! It's a great project, and you've inspired me to build something similar...but please be safe when dealing with concrete. It will kill you, slowly and painfully!
This is about the dumbest thing I have read. The basic kn95 mask doesn’t protect you from silicosis. Silica itself is used to make glass, concrete and similar products and that’s what you don’t want to breathe in.
I've been mixing mortar for 10 years now. I've been breathing it in nearly every day. I've always wondered if it's damaged my lungs and also if that's why running is so hard to breathe after a while. What do you think?
Okay a couple of comments. I built one just like the video three years ago. It worked exactly as you indicated it would in your video. So very good! Now, the cap plates on ours broke the first time we fired up the pit. This was three days after they were poured. The water still trapped in the hardened, but uncured concrete, caused them to forcefully pop and break. So let that concrete fully cure before applying the heat. Secondly, As I said, it worked exactly as you said it would. What you didn't mention was that it consumes copious amount of fuel. In my estimation 3 to 4 times as much fuel. I had to take it out simply because I could not afford to feed it. It is a proven method for getting a hot fire that consumes its own smoke. The problem is I am not using this fire to forge metal. I'm not even using it for heat. A little fire and some friends; that's all that's needed. So you might mention the fuel consumption issues when you promote these smokeless fire pits.
Indeed, that’s why I don’t take any of these DIY videos seriously. 99 percent of the time it’s shortcut scab work. Looks pretty for awhile; until it shows its true colors.
Studies have shown the longer you keep fresh mixed concrete wet, the harder and more durable it will be due to lime crystallization. Great video though! Seriously considering building one now lol
Great video and thorough instructions. I’m going to build one myself. Thanks for the humor and self defamation. We all learn from our mistakes…..hopefully!
Pretty dam cool! Enjoyed your video, as well as you pointing out your errors. Helps everyone learn. The baking soda finish trick was a new one that I didn't know about. Really good job on your video
HAXMAN, this is AWESOME!!! I'm retiring at the end of the month, and this seems like the logical first project I should get done before fall, thanks!!! Yup, I'm taking 2 months off and I AIN'T DOING NUTHIN!!!
I like your style. Your video has good flow and just the right amount of humor. The most important part of your video is that you did NOT ADD ANNOYING MUSIC!! Thank you so much for not editing in crappy music that just kills the video and makes me stop watching. Cool video cool project !
Great video ! Thanks for sharing the boo boos ! Trial and error (mainly error) is a great teacher. Thank God I have a beach to sit on. This back yard jazz looks like a lot of WORK !
Hahaha at first when you pulled out the calculator I thought aww man this is way above my level. But by the time you got to the tape and ratchet straps I knew I was in the right place. Hahaha I'm only half way through and have already learned a lot. 🤔😅😊
🔥I released an album of music you can listen to free! Let me know what you think! 👉 open.spotify.com/artist/1VOVKFOF2gmaiZysdVug2I?si=HUEvBHVzSDKfoayWUNO4vQ
Can you share the materials list and measurements for each?
I LOVE when people don't edit out their mistakes. It gives me more confidence as a DIYer. It's great to know that can be a normal part of the process.
It also lets us know what to remember.
@@StuffTested oh I’m sure we can find our own way to screw things up! 😂
As a fellow DIY'er, one thing I've learned is there really isn't a mistake that can't be corrected. It's just a matter of accepting it and taking the time to fix the mistake.
ZZ@@NewbTube69
If everyone had a Dad like this growing up, the world would be a much better, safer, more structurally sound, and smoke free place.
Thanks! 😂
Nailed it.
If anyone had a dad at all.
I didn't have a dad but I vote for more excellent dads just like Haxman, HAXDAD!😂❤
Nah bro it started when women were allowed to vote
Just showed this video to the wife. She just sighed and walked away. Still, I didn't hear an explicit "no", so looks like I've a project for the summer, boys!
Thanks again, Haxman
😂 Woohoo!
Indifference sounds like a lady yes to me, lol It's not like they don't know how to say no, lol 😆
It's definitely a yes. Also, it's better to ask for forgiveness than permission....
Indifference is how I know my lady is happy. 😆 good luck on the project.
So relatable haha
The perfect amount of humor to keep me engaged, the unedited mistakes, the narration explaining the process, and the logic behind decisions made all helped me thoroughly enjoy this video and subscribe for more in the future.
Well said!
I agree! And subscribed
First video seen…more to go…thanks Haxman!
Same, subscribed!
I worked in construction in the 80s and I recall an on-site engineer that always watched as we poured concrete. I asked him why? He made sure the concrete workers vibrated the mix properly. There's not a lot of strength in bubbles was his reasoning. I've always remembered that.
And at the same time you don’t want to vibrate too much. Separates the aggregate.
@austinatkins408 true speaking, I have seen some bad segregation from over-vibrating the slurry. End up with severe honeycombing on the lower portion of the pour.
You can also use a short piece of rebar to "rod" the concrete mixture and consolidate it to get the air bubbles up to the surface. Similar to "rodding" a test cylinder.
Nowadays we just order it pre-vibrated from the batch plant. Problem solved!
@jaws8817 that's been shown to not be as effective as in situ vibration, bit still better than not
I like how you do not edit out your mistakes. Humanizes you to the viewer. Great job on the pit!
I appreciate that!
For real. I learn on my own and do my projects on my own. When I see someone successfully completing projects while breaking parts and buying tools which don't get used. I genuinely feel like less of a failure.
To be 100% honest. I only clicked video out of pure curiosity of how you were going to separate the foam from the concrete. Watched whole video. Learned a lot. Thank you. ❤
Your wife snorting at your mistake - GOLD! I oft hear that same snort from my wife. It encourages us to do better.
wow... next that
The vibration part of my concrete projects, which are not that many, is the step I always forget. The use of the "reciprocating saw" is a genius idea.
I worked at a rehab facility that thought it would be awesome to take a commercial 6' concrete planter and turn it into a firepit for the residents to have bonfires around during their nightly check-ins. It was pretty awesome for the first few nights, but on the third or fourth night they used it, the damn thing exploded and sent cinders, sharp chunks of concrete, and burning wood flying everywhere. Turns out that, even with proper agitation, concrete is still a very porous substance. Air expands when heated, which could turn your fire pit into a time bomb. This becomes even more likely with repeated heating and cooling. It's why refractories tend to be built with ceramic substrates and not concrete.
I probably wasn't supposed to laugh but the visualizations of the fire pit exploding got me good. Hopefully no one was injured!
@@dustintravis8791 It was pretty hilarious, probably because no one was injured. Just singed clothes and a story to tell.
This one will probably do okay because of the airflow between the metal and concrete keeping the concrete cool.
But yeah, concrete also soaks up water, and when water turns to steam, you get ker-blewy.
The bursting isn't primarily about the bubbles. When concrete hardens, much of the water you mixed it with is chemically bound into the new crystals that are formed. The concrete can be bone dry years later, but that water remains part of it. When it gets very hot, it changes chemically, and the water is freed up. The trouble is, it's inside concrete, so it cant expand, and thus it can get extremely hot without becoming steam. But when the solid matrix cracks, it suddenly releases all that pressure at once and bang.
Yep, that's why you're supposed to use actual fire bricks for smokers and fire pits. It's the first thing I thought of before I clicked on the video.
This is what life is all about.
Creating projects, family, and the land to do as you please.
Literally found this channel this morning and binge wathed 6 already and subbed.
Love it dude keep rocking!!
ALSO ALSO pro tip.... WAIT AT LEAST 20 days BEFORE BURING A FIRE! There is a lot of water still free in the concrete and it is possible to create bad cracks! ALSO ALSO.... keep it wet for 7 days... spraying it with water and covering with plastic. Anyways.... just concrete things.
Also vibrate every square inch, beside the water air pockets get hotter and like to blow up like shale fire pits lol
Great tip, i would have thrown in and fired asap
Not an urban myth!! I have pictures to prove it. The metal liner and gap behind it offered enough protection here which is a good thing but it is 100% guaranteed that green concrete explodes if the moisture turns to steam and I mean explode in a dangerous way. It takes about five beers long after the fire gets cooking. We were lucky.
That mud mixer looks awesome! They really need to get them in every Home Depot rental location.
I'll just wait for harbor freight (china) to knock one off and make it affordable for a homeowner with projects.
Good stuff all round. Great content worth learning to try at home-and great humor as well.
Also like the fact that there's no cussing, no metal or "rap almost music" to deal with. 👍
I did a smokeless fire pit conversion to an already existing pit at a house I bought a few years ago. Did almost the same exact thing you did, I just didn’t have to build the walls. Used a galvanized ring, drilled the holes and set it in the middle with a gap for the outer chamber. Then did the capstones using the same technique, just used melamine board for my form instead of foam board. I only made one form and used it for four pours to give me 4 capstones. Used a bit of old motor oil for my release agent, and added coloring to match the existing walls of the pit that had been already done with landscape blocks. Color matching was the toughest part of the project! It turned out great and works awesome. If I had done the whole thing from scratch, I would have just made the whole thing a bit smaller. Having a 3’ diameter inner ring means you need to make big fires (as you mentioned) and it takes a little while to heat up for the smokeless effect to occur. That’s probably why the commercial ones are fairly small as well.
You earned a subscriber, as your rolling storage system has been on my list of stuff as well, just instead of strut channel and trolleys, I had planned to utilize barn door track and rollers instead. Like minds think alike, and I look forward to watching your other builds instead of filming any of my own, lol.
Anyone else blown away that Edddie Vedder is so handy? Haha, that's a compliment. Great entertainment factor and great work!
The diy smokeless fire pit got me to subscribe 3 years ago. Still watching today. 😂
That's awesome! Thank you! 😁
same for me
Yep....that was the hook 🪝
same for me too! I built that one then, maybe I'll have to build this one too...
Same here
The all thread not to be confused with the all spark because that makes a transformer come back to life is one of the reasons I watch this channel
What other uses can all thread be used for?
@@djdup3819it can work nicely as both nut and bridge for cigar box guitars.
Thank for not editing your mistakes. It’s so much more educating. Great Video; a project I’d like to tackle one day. (Ironically I did edit this comment 😅)
Yeah seriously
0:Naw as if !!! U said Friday!!!! 0:17 17 0:17 @@djdup3819
Little known fact: the knight who designed Camelot's Round Table was Sir Comference. 😉
Dad joke
That’s fkng AWESOME! Now I’m smarter and funnier!😀
Awesome for hotter climates. I like a firepit for warmth when it's cool and that's always been my issue with the smokeless pits because there's very little radiant heat if you're siting beside it. Cool none the less!
Glad you clarified the all-thread from the all-spark,
I was worried about having to fight off Decepticons trying to dismantle my fire pit.
😂😂😂😂
i've been following you for 3 years. wow! already!
I like how you didn't pretend this went super smoothly and flawlessly. Im more apt to follow and maybe try this with your honesty. Thank you!
Imagine the real estate agent if you guys ever sold your house. "Sir, why is there 13 smokeless fire pits on the property?"
"i just don't think it was realistic that they could've cremated that many bodies in that much time, ig I'm a skeptic"
Because 14 would be RIDICULOUS!
Find another real estate agent, 13 isn't a logical basis for superstition.
a dog walks into a telegraph office to send a message. the person there asks the dog what they want their message to say. the dog goes "woof woof woof woof woof woof woof woof woof" the person working there says to the dog "that's only 9 words, did you want to include 1 more word? it would be free" the dog replies "no that wouldn't make any sense"
Just turn them into raised garden beds
The molds are so aesthetically attractive! I am infatuated with them
I like mixing my cement a bit wet when I pour. It's a lot easier to work the voids out of the concrete when doing something like this. Great video man! Thanks.
Just be aware that the strength of concrete goes down the more water you add generally.
It’s called a fabric tape measure. We have just found your videos and find you very helpful and entertaining!
"Y'all better red-neckorize." Thank you, Uncle Hax, thank you.
😄
In my neck of the woods, we call it Redneck Engineering. 😁
I was NOT prepared for that part lmao
We need shirts with, "Y'all better redneckorize" on it! 😂 @@HAXMAN
Finally, a comprehensive example! I can't wait to build this for myself!! Thank you for the education!!
Not sure if it was mentioned, but rock salt is a great way to add texture. Just sprinkle a little in the form sparingly, and it dissolves later. It can also be added when finishing a sidewalk, just sprinkle some on the concrete before it sets up too hard, and trowel it into the surface. Great video.
It's also absolutely horrible for the durability of the concrete
@@benholler1389 It's only bad for the concrete if you constantly let salt into the the pores through freeze and thaw cycles. So your comment is partially correct. The salt used for this texture technique is rinsed out as soon as the concrete is hard enough to handle a spray nozzle, and is used sparingly for a random texture. My parents have 40 year old walk ways that I helped my dad pour as a little kid, using the rock salt method, that still look like new to this day. Granted, I'm not a fan of textured concrete... I prefer a broom pass so light that you can hardly tell it was done.
Love that you don't edit out your mistakes, definitely subscribing. Wife made the mistake of giving me the clear to do whatever I wanted to the backyard...so this is definitely in the cards haha
Quote " Probably one of my favourite tools I've gotten Over the past serval years" Seconds early, haxman wife was helping. Honestly thought he meant his wife. haha She is trooper for being that support hats off!
I FRIGGING love that you put in your mistakes because all of us watching YT are DIY’ing everything and will learn from your mistakes!! Others cut it out of the video and are not honest, IMO. So kudos!! 🥳🥳🥳 Thank you. 🙏🏼
I was here for your first smokeless fire pit and here I am today for your second fire pit
Thanks!
This guys reminds me of myself when doing home projects that I've never done before. Trial and error, baby! Love that he has fun with his mistakes.
One of the easiest and stupidly brilliant pseudo concrete vibrators I'd ever seen whipped together was an oscillating cutter with a pipe strapped to it. Sink the pipe with it on, goes in like hot butter. I wish I'd come up with that one! I've also picked up an industrial vibrating head for various projects that can be had for like $35 and use metal worm clamps to put all kinds of things under Serious vibrational power. I have one mounted to a stainless thermos with 1,000 5/8ths ball bearings in it for grinding hard media into powder.
Murphy's Soap in the huge jugs also works great as a release agent for molding, and you can let it dry and build up layers if you want, or just slather it on and pour. Last time I bought it I believe was 2022 and it was $6 at the hardware store.
The only thing I'd address would be drainage, particularly in areas with more clay in the soil than average. You can use PEX tubing and cast them directly into the concrete and run them wherever convenient or pull it after the concrete cures and shrinks off the surface some. It helps a lot with premature rusting of the inner ring so runoff doesn't pool up in the bottom.
I'm definitely going to borrow that all-thread trick next time though. So we're even. 😉
Can you explain a bit more about exactly how you'd attach the pipe to the sawzall to use it as a concrete vibrator? I can't seem to figure out what you mean 😅
@@javaguru7141 Screw a piece of PVC to an old oscillating tool blade
Best I have seen. Love the bbq addition. Needs a pavilion roof. Currently finishing a smoker moving to oven next.
I love it. Can't believe it's been 3 years already. I've always called those tape measures as sewing tapes', but I think they are actually called "Tailors tape" because if you google search that name a butt-ton of results come up.
Thanks!
Yeah, my mom called them seamstress tapes
You sir, are the man! I have been planning to build 3 gas fire pits in my backyard (yep, that is a long story) your instruction, expertise and ahem humor will turn my dream into a reality! Thank you. I have subscribed. Yours is the first you tube thing that I have ever subscribed to, only took me 63 years. (Hope I did it right). Iam a BIG FAN. Most respectfully, mike USN ret.
I would advise against that. You're not really supposed to make fire pits, grills or smokers out of concrete. You need fire bricks, they're made of ceramic and they are designed for this application. They're used in kilns, fire boxes, diy fire pits and smokers. You don't want to mess around when gas lines are involved, concrete can explode which could create a very dangerous situation.
I knew it - when you didn’t show the application of your release agent, you forgot it 😂 God bless you and your wife! What a trip. Gonna show this to my husband. We move from the burbs to 3 acres in a few months. Smokeless fire pit is gonna be ideal this holiday season! 😁
Congratulations on the move!
Absolute champion. Love people who engineer, plus build with their own hands !!!!!!
Great build. The end cracked me up with you trying to find a place to store those 'disposable' molds!!! The struggle is real. 😄😄😄
Also...THANKS for leaving the bloopers in...they are what make your channel so relatable. Most you tubers would have easily edited out the bloopers and disguised the real world challenges.
I had to chuckle. A true DIY’er! Stuff happens, but the goal doesn’t change. I’m sure there will never be those who critique the build, but I’m one to applaud the perseverance. This is a short but sweet vid and I’m going to add this to my list of what I need to do this year. My original fire pit was made from those big box pavers, and while it took a couple hours to build, it looks like…well, let’s just say it looks like a big box build. Many have them. I want different. I need to remember to keep that seed oil handy for my release agent! Very good job.
I was today years old when I learned about the caulking tube tip cutter on the caulking frame
Same
I know it’s frustrating but I appreciate you showing when things don’t work out as you expect. So many RUclips vids show perfect outcomes every time, which is disheartening for novices. By you showing realistic results makes me more apt to try things
Concrete does not hold up well to high heat. If you don't believe me. Take a torch to it and I hope you have your PPE on. With that said this might work because it doesn't let the concrete to get that hot (unlike standard fire pit). I will stay tuned for the results.
I made a video about this actually on the first pit. The sides are protected by the fire ring. The top doesn’t get hot enough to be affected. As long as you don’t light a fire right after a huge rainfall there are no issues. I deliberately tried to crack the original pit I built with heat and couldn’t do it. You are correct about heat and concrete. If you made a fire directly on concrete that would be a problem.
@@HAXMAN Hey mate, I've seen concrete explode, The fire was actually lit on the slab, it really does go off...!! I'm pretty sure you can get concrete that's better suited to heat...
@@HAXMAN Why not just get castable refractory cement and avoid the problem altogether?
Heat rises
@codycampbell2607 in high-school yeah it does but in the real world it conducts and convects w surfaces.
I can always count on your amuzing informative genius, to entertain and teach at the same time. Thank you for that!
the problem with polystyrene (compared to wood) is that it takes in excess of 500 years to breakdown..and recycling of it is rare...whereas 1/8" ply and 1/4" ply can break down in less than 15 years..we stopped using it for construction for this reason and have gone to using 1/8" and 1/4" for forming
Nobody cares
@@markwarnock4563 his grandchildren will, and will thank him for actually caring about the planet he leaves for future generations.
@@markwarnock4563wrong
@@markwarnock4563wrong
@@markwarnock4563A lot of people care... They just have a higher iq and can understand the issue unlike you.
If I ever end up with enough land to do stuff like this, I'm definitely circling back to this video. Thanks man!
I appreciate your SUCCESS/FAILURE, your SORROW/JOY, and that you are showing this along the way to the really sharp projects that you do. It has a better feel than the slick productions that have the viewers feeling unworthy! I am working on my smoosh technique - to be gentle.
Mud mixer is awesome, I wish I could convince myself to buy one. My old lady would beat me silly if I did... But I sure would like one!
I love the video. Very informative and entertaining as well. I will mention concrete poisoning is a real thing and everyone’s tolerance is different. Always a safe practice to wear some type of glove while getting your hands on wet concrete. Just saying.
Love your Patience and Egineering: and a big hand out to your Wife also.
"Y'all better redneckorize!" I don't watch enough of your videos, but I'm going to fix that, haha. Great video man. Very inspiring.
2:17 - Coolest tool box ever! Big green shelving. That would also make a good book case, keeping dust n bugs outta there 😮
My son is 59 years old. You remind me of him. I love your sense of humor.😊
The best gift my brother ever gave me, 36" oil field pipe casing, I'll be dead and my grandkids would be dead before it wears out, but trying to get a piece of 36" casing is like finding gold, unless you know a welder who works on pipeline and can get you a piece!
I’ve found a better way of vibrating the bubbles out. Attach a piece of pvc pipe on an oscillating tool. Screw it on an old blade. Stick it into the cement and turn the tool on high. Works better than the reciprocating saw.
Rotary hammer drill on hammer mode works great too !
Or better yet just use your wife’s dido 😂
Palm Sander
There's not a better feeling that you make this and enjoy it! I love that feeling of accomplishment!
Im 28 and its happening… these are the things i like to watch and do in my free time😭😭
Welcome to the club... LMAO 🎉
It’s too late, the algorithm has found you. There’s no getting out now. Enjoy adulthood.
Creativity gets me up in the morning, once you get in your unique creative flow ... sweet
Sonatubes work great too man. Get a 3' and 4' sonatube and cut whatever height you want. We use them all the time on firepits. We actually take fire brick and ratchet strap them to the inside piece and the concrete locks it all in once concrete is poured.
Way more expensive than foam
@jellman101 not if you do a bunch of them and cut them to whatever height you want. We do quite a few custom firepits and as with most companies labor is our biggest expense. You can't really mess up sonatubes they are done, kick it off, strap your fire brick to inside, pour and you're done other than carving or rock work. Every company is different. If you don't have many employees and don't do many of these in a year then you're 100% right
Seeing this & saying _"I'm definitely going to do that!._ Then realizing I don't have the time, tools, skills, or patience to make that by myself! 😂😢
That was still impressive & entertaining! Great job. 👌
Your definition of easy is nowhere near my definition.
😂
If you type in your diameter in inches on the construction master calculator and hit the circle button it will give you the circumference as well. Built in short cuts. Invaluable tool that keeps me efficient on the job site. Love your work.
I like how you routinely mix your concrete too dry, despite knowing better.
I too enjoy underfilling my tractor tires, waiting too long to mow the lawn, and under-buying lumber for my next project.
Dude, ur hilarious. The videos are great. But the occassional self jab, or timely quips are priceless. Just subscribed. I'm looking forward to checking out all ur content. Excellent video.
Ok, Ill admit it, I laughed out loud with the "then it hit me joke"
One fantastic project. I have seen a video where the man cut a 2 foot 1/2 inch pvc pipe and duct taped to the reciprocated saw and stocked into the concrete form for smother finish. Well done
After watching this video I will spend $200 and pick up a smokeless fire pit on Amazon. Take it out of the box and done.
Thats why no one will remember your name
And that pretty much sums up the problems in the world today
🤣
The 200 dollar ones on Amazon are like 25 inches. You and a buddy gonna have a blast burning the sticks from the back yard I guess...
@mickym.6711 I cut all my firewood to 20 inches... all the big stuff I burn in an open fire pit.
Nice project. I love all the smoke it makes.
Also it was fun to watch you as you virtually have no idea what you are doing.
PLEASE wear a respirator when you play with concrete!!! Concrete dust is silica...which is glass...which means you're breathing tiny shards of glass. Silicosis is a very real thing!! It's a great project, and you've inspired me to build something similar...but please be safe when dealing with concrete. It will kill you, slowly and painfully!
This is about the dumbest thing I have read. The basic kn95 mask doesn’t protect you from silicosis. Silica itself is used to make glass, concrete and similar products and that’s what you don’t want to breathe in.
@@barretisaacs7718 that's why I said a respirator, not a mask.
I've been mixing mortar for 10 years now. I've been breathing it in nearly every day. I've always wondered if it's damaged my lungs and also if that's why running is so hard to breathe after a while. What do you think?
If the silica doesn't kill you, the poisonous gas from heating the galvanized metal will.
Love it! I also appreciate your intentional/instructional mistakes that teach us what not to do.
0:06 What I want to know is, why is this guy sitting around a fire pit with my family?
Okay a couple of comments. I built one just like the video three years ago. It worked exactly as you indicated it would in your video. So very good! Now, the cap plates on ours broke the first time we fired up the pit. This was three days after they were poured. The water still trapped in the hardened, but uncured concrete, caused them to forcefully pop and break. So let that concrete fully cure before applying the heat. Secondly, As I said, it worked exactly as you said it would. What you didn't mention was that it consumes copious amount of fuel. In my estimation 3 to 4 times as much fuel. I had to take it out simply because I could not afford to feed it. It is a proven method for getting a hot fire that consumes its own smoke. The problem is I am not using this fire to forge metal. I'm not even using it for heat. A little fire and some friends; that's all that's needed. So you might mention the fuel consumption issues when you promote these smokeless fire pits.
You're using the word "whenever" incorrectly sir. Whenever refers to at least a plural, you keep using it in the singular with specific instances.
Thanks queer
Awesomeness. I am a former concrete worker, and this is great idea
that thing is going to crack and fall apart in a few years...
Indeed, that’s why I don’t take any of these DIY videos seriously. 99 percent of the time it’s shortcut scab work. Looks pretty for awhile; until it shows its true colors.
It’s great you’re humble enough to just let the oversights roll 😎
Thanks!
Thank you so much!
Studies have shown the longer you keep fresh mixed concrete wet, the harder and more durable it will be due to lime crystallization. Great video though! Seriously considering building one now lol
Great video and thorough instructions. I’m going to build one myself. Thanks for the humor and self defamation. We all learn from our mistakes…..hopefully!
A country boy can surviiiiiiive! … and thrive…. And build a beautiful smokeless fire pit. We are so doing this, thanks!
Translation: "whenever" = "when" for 95% of it uses. Thats for us northerners. Thank you for coming to my TED Talk. Love you HAXMAN!
I watched this twice now. Another great video………. And HaxMan is looking fit!!!!
Thank you for the ideas. I love that you don’t take yourself too seriously!
It’s nice to see that even if you have seemingly no clue what you’re doing, you can still put up a nice fire pit.
Your original smokeless pit is how I found your channel.
I've been here for the ride since!
Thanks!
This came up on my feed. Randomly seemingly. Good job HAXMAN, very satisfying and I may want to give this a try!
A reciprocating saw without a blade is a great stand in vibrator for vibrating those forms. Cool project!
Pretty dam cool! Enjoyed your video, as well as you pointing out your errors. Helps everyone learn. The baking soda finish trick was a new one that I didn't know about. Really good job on your video
HAXMAN, this is AWESOME!!! I'm retiring at the end of the month, and this seems like the logical first project I should get done before fall, thanks!!! Yup, I'm taking 2 months off and I AIN'T DOING NUTHIN!!!
I like your style. Your video has good flow and just the right amount of humor.
The most important part of your video is that you did NOT ADD ANNOYING MUSIC!!
Thank you so much for not editing in crappy music that just kills the video and makes me stop watching.
Cool video cool project !
The green cupboards at the back of your shed are mint.
Love the wife throwing in some helping hands!
Great video ! Thanks for sharing the boo boos ! Trial and error (mainly error) is a great teacher.
Thank God I have a beach to sit on. This back yard jazz looks like a lot of WORK !
Hahaha at first when you pulled out the calculator I thought aww man this is way above my level. But by the time you got to the tape and ratchet straps I knew I was in the right place. Hahaha I'm only half way through and have already learned a lot. 🤔😅😊
Great sense of humor. Nice work, too.