Thanks for watching! At one point I did not know how to measure and once I learned it was like a huge revelation to me. Now it's time to pass on what I've learned onto you guys 👍
Thank you! 😊 I'm not really sure how much talent has to do with it, I think I would mostly credit the amount of knowledge that I've gathered over the past 20+ years, and I am also a perfectionist by nature so I believe that plays a role in the quality of outcome 👍
Great Video thanks for showing everything you do. Makes others feel like it is possible to fix stuff on my own rather than getting ripped off at body shops thanks again
My garage is full of tools and stuff so I do all of my rebuilds in my driveway which I really don't mind since I like the fresh air and plenty of sunlight. I don't make too much noise so I'm cool with all of my neighbors therefore they don't complain :-)
Without doing a reveal the only thing I'll say that there was no issue with headlight... I left a clue as to what the issue was at the very end of the video as I panned the camera from one side of the car to another. It's not supper apparent, but once you spot it then you know 😉
Shouldn't be too long until next video is posted. I'll try to push it up in a week or so but I'm sure that once I'll make it known and you go back to the very end of this video then you'll see it right away :-)
I bet u know salvage master v. 😊. Also i think wen this series is done itd ve great and interesting if u could do a video trying to repair the danaged wing snd hood off the rolls. No harm plus if u fix them good you can sell them for 5 or 6k?
I'm not sure who the salvage master v is 😕 Is he another RUclips? I actually fixed this car over a year ago and was just sitting on this footage for a while now. Damaged part got recycled after the rebuild was compete ...
@fix206 Ооооо, ты русскоязычный! Извини не знал. Всё отлично, страна живёт. По поводу Трампа позиция различная, кто думает и анализирует понимает, что мало что изменится, как они его называют генерал без армии. Т.е. занял рук.должность но на местах сидят не его люди и ему будет крайне тяжело как и при 1м сроке. Те кто без собственного мнения, испытывают определенные чувства, что ситуация изменится и мол внешняя политика изменится у США. Но почему-то я в этом сомневаюсь, ибо по моему мнению ситуация на Украине не столь опасная, нежели ситуация у Ирана и Израиля. Поэтому всё нормально, люди живут, работают, ездят в отпуска (правда меньше за границу стало ездить), рожают детей, берут ипотеки. Думаю ± ситуация такая же как в других странах.
Да, я русско язычный, родом из Томска, но в Америке уже прожил 30 лет. Здесь после выборов кто-то празднует, а кто-то сходит с ума. Надеюсь что с его приходом все более-менее утрясется и с его помощью закончатся войны. У меня остались родственники и в России и на Украине так что болеть за одну или другую сторону не совсем получается. Ну, ещё пару месяцев а потом посмотрим как и что изменится...
@fix206 Молодец, что не теряешь корни и язык не потерял, тем более с отличной грамматикой! Моё уважение ❤️ По поводу ситуации с Украиной, ты правильное решение принял, тут идёт большая политика, а люди вешают личностные ярлыки разделив людей. Я уверен всё наладиться, правда потребуется много времени и усилий. В Томске был в прошлом году, пиво не плохое, не скажу что хорошее, но не плохое 😁 Давай не деградируй, не теряй свои корни и язык, ты красавчик 💪
You're getting about 16% likes on your video at the moment. That's a bit higher that I've seen on other channels, so it seems that more people like your videos. You always get a like from me of course.
Like always amazing video. Can’t wait to watch the second part. Also, do you have any tips? To spray something with the weather like right now in seattle I wanna spray a tailgate
Thank you! Next video will be out soon. And as far as painting outside I dropped quite a few suggestions in this video: ruclips.net/video/x4jQT5kBZhs/видео.html
I will assure you that I will never use most if any of these techniques, but it is always good to know methods to call BS or know if you are getting a good deal or bad damaged repair car. I don't know what they will say when I bring a tram gauge to a used car dealership, but I already know they hate it when I do the old school underbody checks, magnet, and shock movement tests.
Very much agree but no complaints afterall they're his cars. He has an acquired taste but boy does he knows how to make great videos that keeps you hooked.
This Rolls is certainly a much easier rebuild than the last one. Waiting to see what the major issue is, so hopefully your next video won't be too far away. I wish you had more time to upload videos sooner, but of course you have a life to live and it's not on RUclips videos.
I should have the next video out in a week or two max. I'm going on vacation for 10 days at the end of this month so I have to have it done and posted before then.
Stupid question / title: If any one has seen the way in which you fixed the other RR, then YES! - You will be able to do it (Now I am going to watch the video 🙂 )
If you know what you're doing you don't necessarily need a fancy facility or a controlled environment. I am in a position that even if I bought a spray booth I would have nowhere to put it...
Hi well done you keep it up you are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery up the walsall
It usually works out. As with any job, you have to make sure that the amount of effort and time you put into it is going to be reflected by how much you're going to get paid. And since this is not your run-of-the-mill car, I put more time and effort into this repair to make it just about flawless and I also charged accordingly...😎
Amazing, top notch work!!!
Appreciate it !!
Best repair videos, thanks for sharing and removing the mysteries of frame measurements 🤙
Thanks for watching! At one point I did not know how to measure and once I learned it was like a huge revelation to me. Now it's time to pass on what I've learned onto you guys 👍
WOW, GOD certainly blessed you with some amazing talent!!
Thank you! 😊 I'm not really sure how much talent has to do with it, I think I would mostly credit the amount of knowledge that I've gathered over the past 20+ years, and I am also a perfectionist by nature so I believe that plays a role in the quality of outcome 👍
What good work you do always in joy your videos and learn from them ! Thank you…
My pleasure!
Thanks for sharing your techniques and talent with us...
My pleasure 😊
Glad to see someone still actually rebulding cars and teaching their skills to the community. Loved the laser level trick! Thanks!
What a hero to repair a Rolls Royce. I am very impressed!
I did not realize that it was around four years ago when you did that other Rolls-Royce, Time flies.
I did not think it was that long ago but once I referred to my old footage I came to stark realization that it's been that long 😣
Very simple, but clever, pulling technique with that pry bar, clamp and wooden blocks, subscribed
Thanks for the sub! And welcome aboard !
Great Video thanks for showing everything you do. Makes others feel like it is possible to fix stuff on my own rather than getting ripped off at body shops thanks again
Most anyone with some basic understanding of how this works can get a lot done...
loved the video, first class repairs.
Appreciate it !!Glad you enjoyed it !!
Hi am your new follower from Kenya 🇰🇪 living in Qatar 🇧🇭 . Awesome videos
Thanks for subbing! And welcome aboard !!
I'am very impressed in the way that your work
You make cool informative videos.
Стараюсь ! 😊
A new video series, yippee!!!! Can't wait until the next installment. Keep up the great work sir. 👏 👍
Thanks! More to come soon!
@fix206 Can't wait!!!
I am very very thankful for you man you help me so much at my work place you always my teacher hope you keep going you doing a great a job
Happy to hear that! And always happy to help !
Can u make a video on how and where did u learn all this amazing skills. Maybe like a history of ur learning journey.
I'll touch on that in some of my later videos. But believe it or not, a lot of the stuff that I know I learned right here on RUclips 😎🤣💪
Love your style and techniques. We need to normalize fixing old parts and reusing them. I’ve subscribed and will be looking out for the next video!
I am a big fan of reuse and recycle, main reason it's because I enjoy fixing/building stuff. And I also like to save money :-)
@@fix206 agreed!
Great video I’m surprised you doing this in your driveway Neibor never complain
My garage is full of tools and stuff so I do all of my rebuilds in my driveway which I really don't mind since I like the fresh air and plenty of sunlight. I don't make too much noise so I'm cool with all of my neighbors therefore they don't complain :-)
What a cliffhanger! Can't wait to see what it is. My guess is the driver side front headlight.
Without doing a reveal the only thing I'll say that there was no issue with headlight... I left a clue as to what the issue was at the very end of the video as I panned the camera from one side of the car to another. It's not supper apparent, but once you spot it then you know 😉
@@fix206 I rewatched the end, I didn't see it... I guess I'll have to wait for the next one with the solution. Take care and until next time!
Shouldn't be too long until next video is posted. I'll try to push it up in a week or so but I'm sure that once I'll make it known and you go back to the very end of this video then you'll see it right away :-)
Mad respect for this, Cat, great work
Fantastic workmanship
Thank you very much!
Incredible skills, thank you for sharing this 🙏🏽
EXTREMELY well done video with really great explanations!
Glad you post it❤
Glad you liked it, I got the next one in the works!!
THE phaze "WORK BEAT TALLANT " is right of the window with this guy!!! 1000% tallent 👍👍
Great info 👍
Thanks for watching!
Making it look easy!!
Once you do it a few times, you'll realize that there's not that much to it.
Damm good job!!!!!!!!!!!
This appeared on my fyp, great driveway effort
It's cool that RUclips promoted my stuff to the front page 🙏
Great job i judt subscribed. Not many people fix things anymore judt replace. Greetings from Dublin Ireland
Awesome, thank you! And welcome aboard !
Looks like it’s too easy for you 🔥🔥
Yeah, it was pretty easy 😎 but look at you now, doing perfect frame pulls with no schematics like a boss 💪
Super.Thank you
Thanks for watching!
Impressive work. One could learn a lot from you.
Thank you very much!
Clearly I need better friends. Haha
Amazing work leaning so much Thanks.
LOL... 🤣🤣
You are welcome, got lots more knowledge to pass down to you guys
I bet u know salvage master v. 😊. Also i think wen this series is done itd ve great and interesting if u could do a video trying to repair the danaged wing snd hood off the rolls. No harm plus if u fix them good you can sell them for 5 or 6k?
I'm not sure who the salvage master v is 😕 Is he another RUclips? I actually fixed this car over a year ago and was just sitting on this footage for a while now. Damaged part got recycled after the rebuild was compete ...
He's another RUclipsr that fixes cars he's in spookane Washington he's cool. He's of European descent I think Ukraine@@fix206
Your the Pine hollow diagnostics of body repair... Ivan from phd is amazing on theory and application..Qudos....
Good job 👍
Молодец, хорошая работа. Привет из Москвы ❤
Алексей, привет! Благодарю за коммент. Кстати, как там в Москве люди смотрят на то что Tрамп выиграл?
@fix206 Ооооо, ты русскоязычный! Извини не знал. Всё отлично, страна живёт. По поводу Трампа позиция различная, кто думает и анализирует понимает, что мало что изменится, как они его называют генерал без армии. Т.е. занял рук.должность но на местах сидят не его люди и ему будет крайне тяжело как и при 1м сроке. Те кто без собственного мнения, испытывают определенные чувства, что ситуация изменится и мол внешняя политика изменится у США. Но почему-то я в этом сомневаюсь, ибо по моему мнению ситуация на Украине не столь опасная, нежели ситуация у Ирана и Израиля. Поэтому всё нормально, люди живут, работают, ездят в отпуска (правда меньше за границу стало ездить), рожают детей, берут ипотеки. Думаю ± ситуация такая же как в других странах.
Да, я русско язычный, родом из Томска, но в Америке уже прожил 30 лет. Здесь после выборов кто-то празднует, а кто-то сходит с ума. Надеюсь что с его приходом все более-менее утрясется и с его помощью закончатся войны. У меня остались родственники и в России и на Украине так что болеть за одну или другую сторону не совсем получается. Ну, ещё пару месяцев а потом посмотрим как и что изменится...
@fix206 Молодец, что не теряешь корни и язык не потерял, тем более с отличной грамматикой! Моё уважение ❤️
По поводу ситуации с Украиной, ты правильное решение принял, тут идёт большая политика, а люди вешают личностные ярлыки разделив людей. Я уверен всё наладиться, правда потребуется много времени и усилий.
В Томске был в прошлом году, пиво не плохое, не скажу что хорошее, но не плохое 😁
Давай не деградируй, не теряй свои корни и язык, ты красавчик 💪
What kind of buddies do you have that are just driving around in Rolls Royces 😂
You're getting about 16% likes on your video at the moment. That's a bit higher that I've seen on other channels, so it seems that more people like your videos. You always get a like from me of course.
I always appreciate the likes ! Especially from my longtime viewers such as yourself 😉
New subscribers like what you do great job
Like always amazing video. Can’t wait to watch the second part. Also, do you have any tips? To spray something with the weather like right now in seattle I wanna spray a tailgate
Thank you! Next video will be out soon. And as far as painting outside I dropped quite a few suggestions in this video: ruclips.net/video/x4jQT5kBZhs/видео.html
Nice work
Thank you very much!
great video
Thanks you!
Nice video.
Thank you very much!
Great job, now you have another business
Thank you !!
I had a Russian guy who used to fix all my Mercedes. 😅 your voice sounds just like his . 😅 I miss him a lot 🙏🏾
👍👍👍❤️
Interesting that just yesterday, I was reading your comment on vTuned's Mercedes rebuild. where you mentioned using a laser on your rebuilds.
I comment on videos very rarely, and it's funny that you actually came across one of my very rare comments 😊
i really wait for the next episode
Working on it 👍
I will assure you that I will never use most if any of these techniques, but it is always good to know methods to call BS or know if you are getting a good deal or bad damaged repair car. I don't know what they will say when I bring a tram gauge to a used car dealership, but I already know they hate it when I do the old school underbody checks, magnet, and shock movement tests.
You can never know too much 👍
I am not a fan of Matt finishes on cars 🙈
Same here. The other issue I have is clear coat which always seems to have serious problems here in Queensland Australia.
I'm not a fan either. But I will touch more on that in the following video...
Very much agree but no complaints afterall they're his cars. He has an acquired taste but boy does he knows how to make great videos that keeps you hooked.
k@@fix206
Na lie
Excellence
Thank you very much!
Cool
Thanks !!
This Rolls is certainly a much easier rebuild than the last one. Waiting to see what the major issue is, so hopefully your next video won't be too far away. I wish you had more time to upload videos sooner, but of course you have a life to live and it's not on RUclips videos.
I should have the next video out in a week or two max. I'm going on vacation for 10 days at the end of this month so I have to have it done and posted before then.
Amazing work! Are you open to customer repairs?I would love to work with you!
As of now I have too much on my plate. Not really looking to take on any more jobs...
Stupid question / title: If any one has seen the way in which you fixed the other RR, then YES! - You will be able to do it (Now I am going to watch the video 🙂 )
I knew I could do it, but I still have to make you guys guess 😎
🎉🎉🎉
❤️❤️❤️🙌
👍
👍👍💪
The price of that hood and fender! 😱😱🤢🤮
I did not mentioned in the video the cost of a brand new hood which is a whopping $10,000 😵💫
You should buy a spraybooth or build one...
Spraying a rolls outside doesn't look nice but good job tho
If you know what you're doing you don't necessarily need a fancy facility or a controlled environment. I am in a position that even if I bought a spray booth I would have nowhere to put it...
Not safe to drive anywhere
you have wealthy friends
These are the only two friends I got that have money, everyone else that I know is poor 🤪🤣🤣
Hi well done you keep it up you are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery up the walsall
Price ?
Price for what?
How do I get in contact with you to do business?
I believe is from Russia they don’t mass around on salvage cars
I learned a lot of what I know from Russian rebuilders 👍
Where are you located :) What's your contact might have a project :)
😁
Man if you could repair my botched quarter panel on my Acura TL and paint over the entire car I'd be grateful
You'll have to get in line that's about a half a mile long at this point 🤣🤣
Ok
Ok 👍
How does this work out in Time, Effort, and Money?
It usually works out. As with any job, you have to make sure that the amount of effort and time you put into it is going to be reflected by how much you're going to get paid. And since this is not your run-of-the-mill car, I put more time and effort into this repair to make it just about flawless and I also charged accordingly...😎