This best video for absolute beginners like me. I randomly found your video and start watching and every think i understand from this video. Please continue this series. Subscribed!!
Please keep the tutorials coming! I was near tears in frustration with ZBrush after watching 20-30 “beginner” tutorials, until I found your video - you are the only person to make it truly easy for an absolute beginner to grasp. Thank you!!
Thanks for watching! There’s a new and updated version of this video called “Learn Zbrush in 8 minutes” that covers even more if you’re interested :D Thanks again! More soon!
@@Gatz3D thanks! I’ve already caught that one as well. I am assuming a “six minute” vs is also in the works? You do a great job on these. I hope you can continue to provide these nice, clean tutorials for folks.
@@Gatz3D I really appreciate the explanations of the buttons and how you say them out each time u used it. And how you end the video with a recap of what u did :D The Zbrush interface is so intimidating to a noob like me haha. It really helps that you condensed it to a few tools at a time. I get really lost on other videos. I'm going to take down notes from your videos so I dont forget yay! God bless you for sharing!!!
@@Gatz3D Awesome, I was sculpting with Blender, but seeing that everyone uses ZBrush for sculpting I downloaded the free trial to see if I can see a huge difference, your tutorials were a nice introduction to Zbrush. Most that I found skipped some basics that can really frustate a beginner, thanks again
Hephaestus Excellent! Thanks for that feedback. I’m glad you found the content useful! Hopefully it helped familiarize you with the program in a positive way. If you run into any issues or have questions figuring out Zbrush let me know! I am more than happy to help.
Awesome, thanks for doing it quickly. Normally tutorial videos take so long i find it hard to assimilate. Like 5 minutes to each step. I'm sure watching the next ones. Thanks again
Thank you. I've mostly worked with Blender (along with many other hardscape 3D programs) and wanted to try out zbrush to see if the industry standard was any good. Just loading it up I couldn't do anything so thank you for showing how to even get started.
This is an unreasonably competent demonstration and you convey a solid "you're in safe hands" vibe for a program that otherwise looks very daunting to jump into. I've never used zbrush and I'm probably not your target audience but I'd be interested to see how an experienced user sifts through these innumerable features in pursuit of a modeling goal.
CraigNull Thank you! I want to spread the knowledge of 3D and help other artists use these tools to express their artistic talent. Starting out was very tough for me, so I aim to guide people through some of the difficult steps/hurdles. I’ll be posting more beginner videos and some sculpting tutorials as well. :) 👍
Heck yes you can. One way is to go to the Texture menu up top, go to import, select your image. Then go back to the texture menu and select the thumbnail of the image you just imported, and below that to the right is a button that says “Add to Spotlight”. Click that and you get a wheel menu and your image appears on screen. Use the wheel menu to move/scale/rotate your image into place. Press Z to toggle the wheel menu on/off, or press Shift+Z to toggle the spotlight on/off altogether. If you want to sculpt while using the spotlight you need to go to the Brush menu, go down to Samples, and turn Spotlight Projection off first. 👍 The second way to import images on all sides of your object is: Go to the Draw menu. Below the camera settings are the mini menus for Snap, Front-Back, Up-down, & Left-Right. Click where it says “Snapshot to grid” and it will allow you to start importing images. Click any of the options (Front-Back, Up-down, & Left-Right) to open that menu, and click Map 1. When the texture menu opens, select Import at the bottom left and choose any image. Adjust the scale of the image in the menu below Map 1. To turn an image off simply click Map 1 and select “Texture Off” at the top left. Hope this helps :)
Hi Gatz 3D! I have a couple questions: in your line of work do you use Zbrush on your desktop PC or on a tablet? It's clear you're using a desktop PC in this video, but i'm just curious how it's typically used in the industry. Also- so I'm currently in the engineering/architecture industry working primarily with ACAD and Inventor which is how I've learned to do 3d modeling. However I have a BFA and am considering transitioning into 3D art using tools like Zbrush. What advice would you give someone like me about how to transition into this type of work? I'm currently not located in a town with a school that's listed on Pixelogic's "schools" page...
Hey! Great questions. For Zbrush I have been using a PC (laptop currently), but it works on some tablets, like the Microsoft Surface Pro 5 and up. If you want to do anything cpu intensive a tablet may struggle to keep up beyond a certain point. But using a tablet on the go for smaller work/practice is totally viable. As far as learning 3D Art goes, if you are more inclined toward using Autocad or similar programs, do what you’re comfortable with to create the work you want. There are plenty of successful artists out there that do the initial sketch/layout using Autocad and switch to Maya/Blender later to do their textures and rendering. Are you interested in learning sculpting? Or are you more curious about what Zbrush has to offer that other programs don’t? :)
Zbrush sees individual mesh objects as Subtools. If you click on the Tool menu, then click Subtool, you can select a Subtool from the list and scroll down in the subtool menu to find buttons for duplicate or delete. If you have many subtools, a quick way to switch from one subtool to another is by holding Alt and left clicking on the desired subtool in your viewport. Deleting is permanent and can’t be undone with ctrl+z, so be sure you want that object gone for good. Hope this helps!
But how to learn this if it's available for free only for 14 days. To earn money on this you need time to be good at, but licese is very expensive... :(
Sometimes Zbrush does this crazy thing before you turn on Edit mode. If you took the Simple brush and drew more than 1 primitive (sphere, cube, etc), try hitting Ctrl+N to clear your canvas, and then draw a new sphere. If you draw more than 1, Zbrush doesn’t let you turn on Edit mode. Hope this helps!!
Why is your face showing throughout the entire tutorial? I can understand at the beginning, but after that--? What is the benefit to the viewer? What about your appearance is Informative? Inspirational? Magical? All you do is cover up part of ZBrush's already dense UI. Please. Stop.
You've made zbrush less scary. Think I can finally break it. Many thanks.
This is such a time saver. It beats other tutorials that take 1-2 hours of time just to get started. Subscribed!
Thanks so much! More soon!!
@@Gatz3D Looking forward to more!
This best video for absolute beginners like me. I randomly found your video and start watching and every think i understand from this video. Please continue this series. Subscribed!!
Hands down the best beginner tutorial I have seen so far, thank you!!
you are the best online teacher i ever seen
Wow!! Thank you so much! I want to keep creating helpful videos, especially for people that are new to the software! Thanks so much for watching! 😄😄🙏
Thank you for making this video!! It was very helpful and I was able to pick it up pretty quickly.
Please keep the tutorials coming! I was near tears in frustration with ZBrush after watching 20-30 “beginner” tutorials, until I found your video - you are the only person to make it truly easy for an absolute beginner to grasp. Thank you!!
EDawNash Aw Thank you! I’m glad you are finding them helpful! Don’t worry my friend. The tutorials will keep on coming! :)
Great video, thanks ❤️
Thank you! And thanks for watching! More soon! :D
wow you are godsent strait to the point and kept it simple ..thanks bro
Thank you! Im glad you found it helpful!!
Nice job on this! Many thanks.
Thanks for watching! There’s a new and updated version of this video called “Learn Zbrush in 8 minutes” that covers even more if you’re interested :D
Thanks again! More soon!
@@Gatz3D thanks! I’ve already caught that one as well. I am assuming a “six minute” vs is also in the works? You do a great job on these. I hope you can continue to provide these nice, clean tutorials for folks.
Quick, concise, effective. Love it!
Thank you! Glad it helped!! :D
Stumbled across this! for anyone looking for an easier way to scale you just hold Ctrl and Right click and drag! way easier than alt'ing
This was super helpful! Looking forward to seeing more content!
Thank you! Glad you found it helpful!
That was so helpful you a star thanks so much
Thank you! If you want even more details check out my new video “Learn Zbrush in 8 Minutes” that posted today! :D
More soon!
awesome easy way of explanation
Awesome!! Thanks! Happy to help!
thank you for this! zbrush is difficult to learn coming from blender for me
This is so great! Thanks for the tutorial!
freeone77 Thank you!
This is the 1st Zbrush tutorial that I understood haha! Finally! Thank you so much!
Wow! Thank you!! I’m glad to hear it!!
@@Gatz3D I really appreciate the explanations of the buttons and how you say them out each time u used it. And how you end the video with a recap of what u did :D The Zbrush interface is so intimidating to a noob like me haha. It really helps that you condensed it to a few tools at a time. I get really lost on other videos. I'm going to take down notes from your videos so I dont forget yay! God bless you for sharing!!!
@@KS-zw3ey Thank you! That is great feedback as well. Glad it helped!! :)
Wow, I didn't realize how new this content was, keep on going!
Thanks! Since being able to purchase Zbrush 2020, I am trying to keep up to date on all the latest features available from Zbrush 2018 to 2020!
@@Gatz3D Awesome, I was sculpting with Blender, but seeing that everyone uses ZBrush for sculpting I downloaded the free trial to see if I can see a huge difference, your tutorials were a nice introduction to Zbrush. Most that I found skipped some basics that can really frustate a beginner, thanks again
Hephaestus Excellent! Thanks for that feedback. I’m glad you found the content useful! Hopefully it helped familiarize you with the program in a positive way. If you run into any issues or have questions figuring out Zbrush let me know! I am more than happy to help.
Amazing tutorial, at first I was daunted by the software but now I'm hyped!
You got this! 👍👍 Zbrush is different from other programs, but it’s great once you commit the controls to memory!
Incredible tutorial, thanks so much!
Glad it helped! Thanks for watching!
Awesome, thanks for doing it quickly. Normally tutorial videos take so long i find it hard to assimilate. Like 5 minutes to each step. I'm sure watching the next ones. Thanks again
Thank you!! So glad it was helpful! Thanks for watching!
Thank you. I've mostly worked with Blender (along with many other hardscape 3D programs) and wanted to try out zbrush to see if the industry standard was any good. Just loading it up I couldn't do anything so thank you for showing how to even get started.
Absolutely! Glad it was helpful!
🙏
thanks you very much, this video is just all i needed !
Awesome!! Im glad it helped! :D Thanks for watching!
You save me❤️.. please make a series in Zbrush..
You are outstanding teacher ❤️🔥
Far better than my institute 🙏
Those are very kind words 🤩🤩 I'll consider doing something like that! Thanks so much!
Please keep it up. This video is great.
Roman Thank you!! That is very much appreciated! I’m creating new content as we speak! More to come soon!! 🙏
Thank you!
Happy to help! :)
Really time saver,great video!Pity the like button can be clicked only once,since I think this video is really useful!
Thanks so much!!
Glad it was helpful! :D
This is an unreasonably competent demonstration and you convey a solid "you're in safe hands" vibe for a program that otherwise looks very daunting to jump into. I've never used zbrush and I'm probably not your target audience but I'd be interested to see how an experienced user sifts through these innumerable features in pursuit of a modeling goal.
CraigNull Thank you! I want to spread the knowledge of 3D and help other artists use these tools to express their artistic talent. Starting out was very tough for me, so I aim to guide people through some of the difficult steps/hurdles. I’ll be posting more beginner videos and some sculpting tutorials as well. :) 👍
thank you Mike, already subed, great tutorial
Great tutorial! When I try to export using FBX Export Import, I lose the original color. Any trick to keep the original color? Thanks in advance!
Hey!
It’s possible that your object does not have UV’s?
UV’s are needed to transfer any color or map data on an object.
Super Sick Bruh!
🤩🤩🙌🙌
Can you import images into Zbrush to sculpt on?
Heck yes you can.
One way is to go to the Texture menu up top, go to import, select your image. Then go back to the texture menu and select the thumbnail of the image you just imported, and below that to the right is a button that says “Add to Spotlight”. Click that and you get a wheel menu and your image appears on screen. Use the wheel menu to move/scale/rotate your image into place. Press Z to toggle the wheel menu on/off, or press Shift+Z to toggle the spotlight on/off altogether. If you want to sculpt while using the spotlight you need to go to the Brush menu, go down to Samples, and turn Spotlight Projection off first. 👍
The second way to import images on all sides of your object is:
Go to the Draw menu. Below the camera settings are the mini menus for Snap, Front-Back, Up-down, & Left-Right.
Click where it says “Snapshot to grid” and it will allow you to start importing images. Click any of the options (Front-Back, Up-down, & Left-Right) to open that menu, and click Map 1. When the texture menu opens, select Import at the bottom left and choose any image. Adjust the scale of the image in the menu below Map 1. To turn an image off simply click Map 1 and select “Texture Off” at the top left.
Hope this helps :)
Hi Gatz 3D! I have a couple questions: in your line of work do you use Zbrush on your desktop PC or on a tablet? It's clear you're using a desktop PC in this video, but i'm just curious how it's typically used in the industry.
Also- so I'm currently in the engineering/architecture industry working primarily with ACAD and Inventor which is how I've learned to do 3d modeling. However I have a BFA and am considering transitioning into 3D art using tools like Zbrush. What advice would you give someone like me about how to transition into this type of work? I'm currently not located in a town with a school that's listed on Pixelogic's "schools" page...
Hey! Great questions.
For Zbrush I have been using a PC (laptop currently), but it works on some tablets, like the Microsoft Surface Pro 5 and up. If you want to do anything cpu intensive a tablet may struggle to keep up beyond a certain point. But using a tablet on the go for smaller work/practice is totally viable.
As far as learning 3D Art goes, if you are more inclined toward using Autocad or similar programs, do what you’re comfortable with to create the work you want. There are plenty of successful artists out there that do the initial sketch/layout using Autocad and switch to Maya/Blender later to do their textures and rendering.
Are you interested in learning sculpting? Or are you more curious about what Zbrush has to offer that other programs don’t? :)
underrated
:D Thank you! Hope you found it useful!! 🙏
u're a god
Hahaha well... that’s quite the compliment. ;D Thank you!
Hope all these videos help!
Super
Thank you!! :D
More soon!
How do you delete an entire object?
Zbrush sees individual mesh objects as Subtools. If you click on the Tool menu, then click Subtool, you can select a Subtool from the list and scroll down in the subtool menu to find buttons for duplicate or delete.
If you have many subtools, a quick way to switch from one subtool to another is by holding Alt and left clicking on the desired subtool in your viewport.
Deleting is permanent and can’t be undone with ctrl+z, so be sure you want that object gone for good.
Hope this helps!
great important information quickly because I hate watching tutorials
Awesome! Thank you! That is great feedback for me as well! Thanks for watching!
Almost like I downloaded the Zbrush Matrix program! "I know Zbrush"
I just crackd zbrush and i realise its not all over since learning it still exsist
But how to learn this if it's available for free only for 14 days. To earn money on this you need time to be good at, but licese is very expensive... :(
I watched 5mn of a "beginner tutrotial" and i literally hated zbrush after ,5mn in this tuto and it's already much simpler
Thank you! Glad it's getting the point across 😅 Thanks for watching!
For some reason I cannot click on Edit. =(
Sometimes Zbrush does this crazy thing before you turn on Edit mode. If you took the Simple brush and drew more than 1 primitive (sphere, cube, etc), try hitting Ctrl+N to clear your canvas, and then draw a new sphere. If you draw more than 1, Zbrush doesn’t let you turn on Edit mode. Hope this helps!!
So this is what happened to that 6 minutes ABS SCUPLT guy
I am Billy Mayes. Buy Oxi Clean.
great tutorial, pussy prosperity and opportunity on you my friend
put on x2 speed for 6 minute tutorial
Genius. Now I need to make "Learn Zbrush In 6 Minutes" for a 3 min tutorial on x2 speed 👏👏Thanks for watching!! :D
Why is your face showing throughout the entire tutorial? I can understand at the beginning, but after that--? What is the benefit to the viewer? What about your appearance is Informative? Inspirational? Magical? All you do is cover up part of ZBrush's already dense UI. Please. Stop.
You need to chill. Sup some water and take a walk
Turn speed on 2x and learn Zbrush in 6 minutes
Turn speed on .25 x and watch me talk like a boozy hobo for 48 minutes.