NZXT H9 Elite White Build Update : Vertical GPU Mount, AIO Side Mounted, Reverse Blade Infinity Fans
HTML-код
- Опубликовано: 15 янв 2024
- Here's a step by step guide on how I Side Mounted my AIO, installed Lian Li Reverse Blade SL-Infinity Fans, Installed a new AM5 Bracket, and Vertically Mounted my 4090.
NZXT H9 Elite Case : bit.ly/h9-elite
NZXT Kraken Elite : bit.ly/kraken360elite
NZXT Vertical Mount : bit.ly/nzxtgpu
Thermalright RED AM5 CPU Bracket : amzn.to/3OdschV
Lian-Li Reverse Blade Infinity Fans : amzn.to/47PiXeN
=============================
🛒 Products from Video - Using My Links Helps Support This Channel ! TY 🔥🐺 beacons.ai/firewolftech
=============================
Fire Wolf Gaming PC : amzn.to/3RbiIEA
Desk Setup : amzn.to/3NMVYd7
🔥🐺 Gaming PC 🐺🔥
NZXT H9 Elite Case : bit.ly/h9-elite
CPU AMD Ryzen 9 7900X : amzn.to/3Yu1bL2
GPU Asus RTX 4090 White OC : amzn.to/45iehOs
AIO NZXT Kraken Elite 360 : bit.ly/kraken360elite
RAM TeamGroup RGB DDR5 : amzn.to/45X6Qvo
MOBO Asus B650E-F : amzn.to/45Xr9cc
FANS Lian Li Infinity Fans : amzn.to/3JWgPbW
Reverse Blade Infinity Fans : amzn.to/47PiXeN
RGB Cables Mobo : amzn.to/3oEMPdq
RGB Cables GPU : amzn.to/3qwUDhW
=============================
Follow my Socials
=============================
TikTok : / firewolftech
Instagram : / firewolftech
- Fire Wolf Tech
firewolftech.com
DISCLAIMER : This video contains affiliate links from which I may receive a small commission from sales of certain products. This helps support my channel so thank you for using my Affiliate Links. 
Наука
oh wow that looks amazing well done bro you inspired me to build another computer for myself thank you for sharing
You're welcome, I'm glad it inspired you ! I'm actually going to do a black NZXT H9 Elite Build from start to finish, should be done by this week
@@FIREWOLFTECH that sounds great can't wait to watch it
Beatiful build by the way. Definitely subscribed to your channnel.
Thanks so much 🔥 really appreciate that. Come back after an hour once 4K is processed
i learned a lot from this video well done
Thanks 🔥 appreciate the feedback
bro your white pc build is exactly like the one I always wanted to build. I'm definitely using your links for every part. Already got most sitting in the cart right now. Keep up the amazing work. Now I need to watch your monitor reviews for the OLED you have.
I appreciate the feedback 🔥 I did a black one in case you need a step by step guide.
At the moment I have the LG 34GS95QE which I’ll be dropping a video soon
@@FIREWOLFTECH thanks a ton and I have your black build saved in my pc build playlist I’m watch step by step when my parts get here. You area life saver
@@TheWeezyfly did u build it?
Yes I did and loving it
subed & deff going for this build 100%
thanks I appreciate that 🔥
Could you mount the bracket lower if you don´t use the support bar?
I think with all V brackets, they are 2 slot´s to high...
The lian li fans are so beautiful
They really are 🤤
Hey fire Wolf, does this gpu anti sag bracket fits in montech king 95 pro case?
I think im going to build this as my first pc thanks for the video
You're welcome ! I'm glad you liked the video !
For a first build is crazy but hell yeah
@@zennfrz I'm going to get the 4080 and the 7 7800X3D to make it a bit cheaper I'm going to spend around 3k I'm from uk
This is what the art of pc building is about.
🔥
Would like to know if the GPU is tilted to the right as it seems to be.
New link for strimer cables? GPU cable not available on amazon 😢
Nice video. Trying to follow which direction the air is flowing, and where you used the reverse blades.
Could you quickly just go over the fan directions? Assume bottom is intake. Rear is exhaust. What direction is the top and AIO Radiator?
I only used the reverse blade on the side attached to the AIO.
So bottom and side are intaking air while the side and top are exhausting air out
and thanks 🔥
What are the specs of your H9 Ellite gaming PC???
Bro, where can I get this support? 9:27
I just bought the Samsung odesessyG70b monitor, I seen that you review that monitor a few months ago, any recommendations for the monitor settings or do you just keep them default, any help appreciated, thanks
Typically you want a good picture quality but maintain low latency
Very cool. i have to do an upgrade for improve cooling for a 4080/4090 and I’ve decided this will be my next case
The NZXT H9 Elite is a solid choice 🔥 Building on it was very easy and love how much space you have for extra large GPU’s.
The flow version is also great, I just prefer this one for the top glass 🔥
@@FIREWOLFTECHGreat . it's also really beautiful even the top in transparent glass...at the beginning I had chosen the corsair 5000t rgb but it doesn't have the same vision of that ....I hope there will also be a 5090 xD
10/10 build
@@FLY7MARK Thanks 🔥
@@babajaga_666 Yes the top transparent glass is so nice ! There will def be a 5090, how much and how big is what I'm worried about 😅
I'm Building a similar build with the same fans. How many fan controllers did you end up needing? Looks like 6 reverse fans and 4 exhaust.
That’s correct, and only one control. I just did a complete step by step video on a new black H9 elite : ruclips.net/video/OYq5TZ4aN9o/видео.htmlsi=KsApIKo3KnQWjesz
Hi! I was wondering what you have done with your AIO. So basically you are using the kraken 360 elite but you have replaced the original NZXT fans with the Lian Li fans, is that right? Thanks!
Yes, I didn’t like the NZXT fans on the kraken or the H9 elite. I was able to sell them on eBay lol the cable management on the LIAN LI makes building so much easier
Is this mount going to work with a RTX 4090 Asus Strix OC ? On their website NZXT says i'll work with GPU that are up to 3slots wide meanwhile this rtx is 4 ?
The GPU that I have in this video is ROG STRIX 4090 OC ;) 🔥
Can you show how you've connected all the RGB in this case? What has went into a spiltter, nzxt rgb controller, etc.?
That depends on how old your fans are.
Newer fans are way easier to daisy chain.
so if you can give me a summary of what fans you are looking at then I can give you an answer
I bought this case with ARCTIC P12 PWM PST A-RGB. I don't have a fancy build but I'm working on it, transferring everything over for more room in the future.
I notice there is still space at the back of the AIO, can you fit 3 more Infinity fans? Or Is there no space when the back panel is put back on? (I am thinking of a similar build just with an extra 3 fans for a push pull AIO setup.)
Yes you’ll be able to do a push pull, I thought about it, but decided not too, since I would’ve needed another controller 😅 the difference isn’t too much l
Thanks, good to know the case will fit the extra 3 fans for push pull at the back.... your build looks awesome :-). Was the extra controller needed because it only supports "4 groups" (16 total) Fans? Deeper down on the Lian Li INF fan page it says you can use the provided splitter in the triple pack and so that should solve the extra controller problem by using the splitter on say the left single and top triple fans, or am I missing something else?@@FIREWOLFTECH
BENEFIT 5th GROUP OF FAN
A Y-type 7-pin splitter is included in the 3 pack for users that need to connect a 5th group of fans to the same controller.
Also unsure about L connect with the 5th group and if it shows the 5th group for all 6 side fans. That's why I thought you can use the splitter just to make 1 four fan group and 3 triple groups.
How do you remove the glass that the motherboard cable pass through? Is it hard to remove?
Which side of the glass ? Top, side, or front ?
Hey I pretty much got the same parts was just wondering I prefer the aio mount at the top does that make cooling worse? Or did u just mount to the side for preference?
I mounted it to the side so I could take advantage of the top see through glass showing the fans for aesthetic. Also, by having it on the side, the Infinity Side Mirrors are also seen through the side glass which looks so much better
@@FIREWOLFTECHomg you replied thanks soo much this helped also not bother you more but what cpu and psu do u have as I’m then work out the leg room I need?
Hellou, how do you get the Luigia in your nzxt display?
You can download a Lugia "Sprite" they have them on several websites where they're already gifs. Once downloaded, you just upload it to the NZXT program
Why does it matter if it sags if its a vert mount? The whole point would be to stop it from putting stress on he pcie slot but vert it doesnt do that.
its the same reason you opt for rgb fans, cables, color, etc. You just want it to look good, and when it sags, its an eye sore to me
i am asking myself 1 thing...is it possible to mount the vertical mouunt 1 or even 2 slots lower?
I don’t think it’s possible. You would have to use another 3rd party that gives you more flexibility. Someone on the comments mentioned the cooler master v3
Good looking build building mine right now wanted to use Lian li uni fan sl120 rev. Bought both them and the new Corsair QX ...But didn't feel like going through all the trouble of splicing them in to Icue since that's what my AIO and RAM is. So I did the new IQ QX.. did 3 140s on the bottom too... Only thing I would suggest is run your tubes behind the NZXT "signature "bar" since you did your AIO tubes up top... looks much better. I had it that way at first before I decided to flip my AIO and have the tubes at the bottom. It's better for your AIO and the AIO tubes are hidden from the vertical GPU. I bought the NZXT vertical mount And The cooler Master vertical Mount V3. And to be honest with you I like The cooler Master better. You can adjust it in and out and forwards and backwards... The NZXT just puts it too close to the board. Thought about modifying it and moving the pcie plug further towards the front glass... But this build has taken long enough lol. Good looking build tho dude
If by signature bar you’re referring to the part that sticks out, there’s no way the PUMP fits under that 😅
Also, if you flipped the AIO for tubes on bottom, my understanding is that it’s not a good thing to do ? I’ve seen many videos advising against it.
And I feel you about build taking so long 😅 It’s fun, but out of no where time just flies lol
Thanks for the feedback 🔥 I appreciate it
@@FIREWOLFTECH you know you can remove it right? It just unscrews.Lol. Run the tubes behind it then just put it back on....doing a custom build in one now... It's stupid sick
@@FIREWOLFTECH and know. Tubes at bottom is better than at top actually. Watch provoked prawns video. The top of the rad it still above the pump. So air bubbles will get it. Instead will be stuck at top of rad
@@skypallman6169 damn I didn't know it unscrews 👀 any water leakage when you unscrew it ?
@@FIREWOLFTECH no no don't unscrew the pump unscrew the metal bar
There are screws in the back two up top and then one in the middle and one at the bottom I believe I wish I could leave pictures cuz I would show you mine but you can take that bar off push the tubes behind it and then put the bar back on and tighten it back down
can you set the colors of the fan bro to all white ?
yes you can set it to almost any color combination
46 degrees on idle? I don't think that puts the Elite version in a good light. Honestly, from what I've read this case is terrible for airflow.
AMD's Ryzen 9 runs hot. I'm completely satisfied with 46 idle for a 7900X. at the moment I have 7950x3d. If you look into idle temps from other users, some have it higher than 55.
@@FIREWOLFTECH Fair enough but I firmly believe that if you move the AIO radiator from the sides and mount it on top of the case you can shed 5-6 degrees.
Tbh I'm surprised why you even decided to use the AIO fans for intake. Isn't this pushing hot air to your motherboard?
The case has amazing air flow
how were all 9 fans connected? daisy chained with 1 header or 3 seperate headers
They're all daisy chained into one control fan hub
@@FIREWOLFTECH how was cable routing did you have to get extensions
Did you remove the glass on the right side so the strimmer cables can come through?
Yes ! Had to remove that lol
I did a Black H9 elite tutorial in case you’re interested: ruclips.net/video/OYq5TZ4aN9o/видео.htmlsi=d2J_m9MqCmBrgfl3
Awesome,
I have a H9 elite just built my first PC and I just installed the strimmer cables but I didn’t think to run it through where that glass is on the right side
@@FIREWOLFTECH did you use a regular screwdriver to remove it?
@@Marcus.W Its tricky to take out when you have all the wires on the back. You would need a screwdriver that is long and skinny. A ratchet style screwdriver would also make it easier, I should order one just to have it in case lol
What is the red cpu thing? Can you please link it?
I just added the link in description ! Here's the Amazon Link : amzn.to/3OdschV
Disclaimer : This is an Amazon Affiliate Link in which I earn a small commission if you purchase using my links. Thanks for the support !
Hey Buddy do those Lian Li 3 pack RGB Fans comes with controller
Yes 3-Pack comes with controller 🔥
@FIREWOLFTECH thanks buddy I seen on your build the wire management is much better with the Lian Li RGB Fans then NZXT fans
Yup that’s the beauty of Lian li daisy chained fans. A lot of brands have started doing similar ones
@FIREWOLFTECH how much room there is between bottom fan on Fan tray and the left bottom fan if there is a just enough room to plug the daisy chain then I can connect 6 fans with only one connection to the Controller
What rpm should
I run on lian li fans
I personally run a custom line which only starts to spin faster when CPU is at 60+
I hate hearing the fan noise all the time, and I’m ok knowing the GPU and CPU run great without having the fans to spin fast
what is the point of getting the glass top if u put the cpu cooler on it? Why not put the cooler on the side and put the fans on top?
Is that not what I just did ?
yes you did i am so sorry, i did not look propper at it. I have been looking around and no answers so i just copy pasted this question under every video with the cpu cooler on top. So i am sorry you done an amezing job i think so :))@@FIREWOLFTECH
lol no worries, I originally had it on top because it was always the "best" option for AIO config, but over time looking over the top glass looked horrible so I made the switch. I also made another full tutorial build on a black H9 Elite
Rgb cables is from lian li?
Yes, they’re strimmer V2 cables !
Nice Job bro :) I have the H9 Flow. I opted for APNX FP2 fans full metal case 30mm and comes with reversible fans, just pop out the intake fans (be careful when you do this). I was going to get NZXT Vertical support GPU but I opted for the Phantek Premium Vertical, this allows you to slant it 45 degrees which is really cool.
that vertical mount is nice 🔥
The only gripe i have about this case is the lack of rubber grommets
I didn’t mind it since it was way easier to pass the cables through. I think you could always add rubber grommets if you want
Why is the quaility so low? It's on 360p for me.
It just uploaded, RUclips takes like another hour to fully process 4K. I should’ve scheduled it after an hour 🥺 sorry about that
this and that sheeesh
🔥
what case is this plz
It’s the NZXT H9 Elite in white. I have it linked in the description
subscribed! I want this build..can you please help and guide me to build one🤞🙏thanks
Thanks I appreciate it ! I’m considering making another build but in black in the near future and will definitely do a guide
I am very new to pc building, why did you made your top-fans to have face on upside…
My guess is that its purely for asthetics.
the top fans are set to exhaust in the same way the rear is also exhaust. The reverse blade on the side are intake, and the bottom are also intake, I just didn't replace the bottom with the reverse blade yet.
Most builds are like that. I just moved the AIO to the side because of the top glass
my god that 12pwr of the graphics looks burning danger to me
Why ? The back of the case is even worse 🤣
Want this case but my old pc build is black/rgb 😂😂😂 pissed
Go for the black lol I'm building a Black NZXT H9 Elite, should have it ready next week 🔥
@@FIREWOLFTECH i might aswel 😭 but i like the white case
4090 but not all reverse blades? So only partially aesthetic? You bought a vertical mount support but still use the kickstand? The whole idea is for it is to look clean without the little pole. The mount you bought adjust at both ends. You need to level the video card to the case itself not the desk it's on. This way its level to the mother board. You spent ton on Strimers and controllers. Why over lap them, hiding 40 percent of what you bought? Come in from top or bottom. The Lian Li, L- connect effects will look a lot better if its looks like a waterfall into the card instead of a light knot. Turn the radiator 180 degrees. The tubes look cleaner and you wont block those beautiful fans, just the left side of the mother board which is just black. Not hating, you spent a TON on this build why duck tape the little details that really bring a build together. You can do better.
Sorry but thi is stupid. open case with so much neccessary fans that do nothing in this case:D
Yes you’re right, only the AIO Fans is doing something. I have it out a lot of times when I’m recording content. I do put it back occasionally, but remove it because of the reflections I get
I have the H9 flow I didn’t use the bottoms bracket because I didn’t feel like removing my bottom fans 😂 and I have no issues. But this a very beautiful build def very nice. I wish Corsair would make reverse blade fans 🥲
Then bottom fans are a chore to remove and re add 😅 so I feel you
Thanks for the feedback 🔥 and hoping they do in the future
I have a question since I’m building my first pc and I only need to buy the fans and the liquid cooler, may I sound dumb but can you change the fans in the liquid cooler so all the fans are the same?? Since I think you have all Lian li fans and I want the same, how you do it??
Also do u recommend to build the pc with all reverse blade or normal ones??
Thank u🩷
Yes instead of using the fans included in the AIO cooler, I used Lian Li Fans (Reverse Blade). If you want all the fans to have the mirror showing, you would want 6 reverse blade fans (3 on cooler, 3 on bottom) and the other 4 fans regular (3 on top, 1 rear)
I just did a full black H9 Elite build step-by-step tutorial in case you’re interested:
ruclips.net/video/OYq5TZ4aN9o/видео.htmlsi=d2J_m9MqCmBrgfl3
Good luck with the build 🔥
@@FIREWOLFTECH Thank u so much!!
I have another question, since I have the lian li dynamic o11 white case do I need to buy the normal and reverse as you said or all reverse?? And why??
Thank u sm for your help!!🩷
@@luciamorante9584 You're Welcome !
You don't "need" reverse, you could get them all normal. The reason for Reverse is so you can see the mirrors while the fan act as INTAKE. The normal ones have the mirrors showing when its in EXHAUST.
In this video, the bottom fans are normal ones, but because I need the airflow to INTAKE cold air, I have to put them upside down which don't show the mirrors. I eventually will swap these for mirrors (the reverse weren't even an option when these fans first came out)
So if you want all the mirrors facing up like in my Black H9 build, then you would want 3 Normal Ones for TOP (EXHAUST), 1 Normal for REAR (EXHAUST), 3 Reverse for SIDE (INTAKE), and 3 Reverse for BOTTOM (INTAKE). Otherwise you can go with whatever you want.