Nicely made. He does however do something you should avoid if at all possible. That is holding a hardened shank tool like an end mill in a lathe chuck. The grip on the hardened shank is not good and you run the risk of having the end mill sucked out of the chuck jaws into the work. The trick is to get end mill holders with Morse taper shanks to fit into the lathe's spindle. These holders use a set screw to hold the end mill (or drill chuck) in place on the flat ground into the shank of the end mill. These holders aren't expensive. They also have internal threads on the end of the Morse taper so that a drawbar through the spindle will retain the taper and allow easy removal of the tapered shank.
هذا الشخص بعد ان يستخدم معداته لفتره من الزمن سوف يستطيع ان يبيعها بحكم الجديد دون يستطيع احد ان يكتشف انها مستعمله 😉😁😁😁👍انت تجعلني اتقزم عندما اراى مستوى نضافة وجودة معداتك
The below center facing pass at the beginning bothered me so much. 😂
Nice job as usual though.
Well done great job as usual👍
Such a clever clevis-☺
Great work as usual 👏
beautiful work
Hasil kerja yg Sempurna
It's Friday and that means time for some Swap Lamp.
Nicely made. He does however do something you should avoid if at all possible. That is holding a hardened shank tool like an end mill in a lathe chuck. The grip on the hardened shank is not good and you run the risk of having the end mill sucked out of the chuck jaws into the work. The trick is to get end mill holders with Morse taper shanks to fit into the lathe's spindle. These holders use a set screw to hold the end mill (or drill chuck) in place on the flat ground into the shank of the end mill. These holders aren't expensive. They also have internal threads on the end of the Morse taper so that a drawbar through the spindle will retain the taper and allow easy removal of the tapered shank.
music very nice
Интересно что получится. Здравствуйте спасибо за видео
Услада для глаз перфекциониста!
The saw not being concentric with the spindle always bothers me
awesome work
how to DIY Heavy Duty Drill Press
Лайк. Молодцы. Супер!
1045 steel, очень хорошая сталь по обработке смотря по видео? Резец быстро садится?
Спасибо за просмотр.
Поскольку скорость резания относительно низкая, фреза практически не изнашивается.
@@SwaplampJapan Какой тип державки для треугольной пластины?
Спасибо за ваш ответ.
Это держатель типа Pinlock от Sumitomo Electric.
Номер модели: ETGNR1616H1604.
A cosa serve?
Grazie per aver guardato.
Questa è una parte di un dispositivo slotter a leva manuale.
@@SwaplampJapan guardo tutti i tuoi video, ammiro la precisione e l'ordine. Grazie.
❤👍👍👍
هذا الشخص بعد ان يستخدم معداته لفتره من الزمن سوف يستطيع ان يبيعها بحكم الجديد دون يستطيع احد ان يكتشف انها مستعمله 😉😁😁😁👍انت تجعلني اتقزم عندما اراى مستوى نضافة وجودة معداتك
Please, do not use spring washers. They are rubbish. Google junker test, spring washer.
Супер.