Thank you very much! Today I got a new PC with Asus Z370-P and I couldn't get it to boot to Hackintosh, your settings made it work and it runs faster than Windows!
Thank you! I've been without my hackintosh for 2 days after a failed upgrade to 10.15.4, and even a new drive and fresh installation failed. Using your settings I'm now in! Seriously, I can't thank you enough! (I will tip though!)
Hello I have a problem with the installation of os Catalina, I have an Asus b360 pro gamer board, in the first installation when I prepare disk with the disk utility, I give a disk installation but the installation never ends, it freezes in less than one remaining minute
Morgonaut, many thank you for posting this. My Asus Prime X570 bios isn't exactly like the one you posted- do you have a written article I can check for settings for the Asus X570 Pro motherboard? Thanks again- great job!!
Thanks, you’re videos are great. I’ve got an old Haswell NUC Hackintosh. Not directly related to this video, but in general all your videos are well put together and have given me a greater understanding of Hackintosh. Have a great day
Hi Teresa. It would be very nice, to make a mini itx hackintosh build, or recommend us, a mini itx board in place of your Asus Prime Z370-A board you use in your built. mini itx advantages are so many... lightweight, small size, you can even throw it in your back pack and take it with you where ever you go! With a bluetooth mouse and keyboard!
did you get to make the video to configure the thunderbolt? I have a thunderboltex 3 and after installing Monterey, it unconfigured everything. My mobo is the same as the one you used in the video.
Hi Teresa. I have the ASUS Prime Z-370P motherboard and got my Hackintosh working after fumbling around a bit. That was b4 I discovered your channel, which is amazing BTW. For M.2, my BIOS only has settings for M.2_1 configuration but yours has M.2_2 PCIe Bandwidth Configuration as well? I do have M.2 drive installed in my setup.
I build my hackintosh with Asus Prime Z370-A II, and it runs very well (Mojave, i7, 32gb ram, Radeon RX 580, Samsung EVO970, bios version updated from original until "1202" (last one), Morgonaut tweaked EFI etc, etc). Very fast and runs any applications softly. No problems. But... there are no crapy, cheap USB keyboard to let me enter on BIOS setup! Any advices?
Hi. I followed the best I could. My hackintosh installer keeps restarting my computer. I’ve got an asus x299 motherboard and gtx1080, High Sierra and on a Seagate sata ssd. I get in to clover and I go to the Mac installer and it shows the apple logo then restarts. Verbose Mode it freezes or restarts itself at the same point just after the finalizebootstructure seeds.
Hello, great video! I have bought a more recent asus prime h510 and i cant make it boot for nothing 😞 i think its cuz somethig on bios…but it seens a little different than the video some things (and some i just could not find it 😭😭) im a begginer on hackbuilds…so i tried to use a prebuilt version and so far i could reach half bar before it frozen screen or reset 😞
Great start up video :) Since the changes my screen resolution has shrunk on the monitor using the PCI Graphics card which the monitor was running fine on before these BIOS changes, any ideas?
@@MorgonautHackintosh wow you reply fast thank you! Big fan. I just needed to know sense I'm looking into buying a gigabyte or Asus motherboard for my first time build and I'm noticing that WiFi boards are more expensive so I should just save the money and buy an adapter!
Can I do this whilst using windows? Or only when I am about to install MAC OS? Because once I did it, I couldn't load windows anymore and I had to force reset it.
Great resource here Theresa, thank you! Following your vanilla guide I have been successful getting a running High Sierra machine (I have the GTX 1080ti). Only thing not working is Bluetooth for things like Handoff, Airdrop, Continuity, Universal Clipboard, Instant Hotspot, Apple Watch unlock, etc. I have the Asus 370 ROG Maximus X Hero (Wi-Fi AC) board which has a Bluetooth V4.2 chip built in. Is this supported natively or is it required to get the Broadcom BCM94360CS2 card for these Apple BT features? I have no need for Wi-Fi (using wired ethernet connection) just Bluetooth.
@@MorgonautHackintosh Wow thanks for the very quick reply. Just to confirm, the on-board wifi/bt chip is NOT compatible and I would need to replace it with the Broadcom BCM94360CS2. Do you know if that chipset is the easiest/most compatible Bluetooth option?
i got osx snow leopard running on lenovo , pentium g630- onboard hd chess app sluggish - no graphics acceleration - the hmdi connector may make a difference - i tried celeron 847 no luck - perhaps osx tiger might work.
First of all, thank you so much for all the precious information contained in your videos. I am trying to make a hackintosh with an Desktop Asus Vivo PC K31CD --- MB H110-i32CD4 / DP ---- CPU i5 6400 Skylake------DDR4 4go- --------INTEL HD 530-GPU integrated + GPU Nvidia Kepler GT 2go one of the great difficulties for me is that MB's Bios does not show me the same possibilities of adjustments that appear in your video.please would you have any suggestions so that i can make the same changes? thank you
Hi! After setting the bios with your instructions, I can't anymore see my SSD in Mojave installer / disk utility, even when show all devices is selected. I'm not sure it shows even in bios, as it's my first time running this mobo. What is wrong ? The SSD was even formatted in other Hackintosh / Disk utility. I got Asus Prime Z370-A mobo with i3-8100, and Kingston SA400 Sata SSD.
@@MorgonautHackintosh Nevermind... I switched SATA port & cable, and now it works. Could be faulty cable. Phew. Thanks for quick reply though. Keep up the amazing work.
Hellow, thank you for your video, i have à big problème with my pc, many years, when i expot by Davinci Resolve générale blue screen, process died, can i do the same like you? I have Asus X 299 sage 10GB. Or do have a video for this motherboard? Thank you in advance, must i put Fan by Auto?
@momobestE - of course you do the same as me if you are same skilled as me :) If not you can always get my personal one on one help and video call with me - links are in video description
there are terms of the motherboard in the bios which does not resemble the one shown in the video, and does not exist. I updated the Bios and did as you said, but the computer stuttered, strange, I add I have an I9 7980XE with 256 GB memory, an RX 3090, Samsung 990 Nmv2. but, it is not fast on Davinci Resolve Studio, the memory remains by default on 2666 MHz, so the processor does not exceed 2.6. could you help me? I am a subscriber to you. THANKS
yes I did run catalina on this motherboard. And no, I will not produce a video about how to do it, because it's old motherboard and Catalina is several generations old system, to make a video for 1 person is not worth it
I'm sorry if I gave you a headache. I have an Asus motherboard where the operation of the Mojave system is easy to install, but when I try to install Catalina, it loads USB halfway. Do you have an opinion? Thanks again for your reply.
Hi, do you have any suggestion if I can't find 'fast boot' or 'secure boot' in my bios settings? My board is ASUS P8P67 LE with the latest updated 3801 version. Really appreciate your help.
I have an ASUS TUF X299 Mark 2 motherboard with BIOS ver. 1902. I use Intel Core i9-9900X CPU, Intel 512 GB M.2 SSD, and Sapphire Pulse Radeon RX580 graphics Card. Using your BIOS Settings does not work. I can load Clover, but when booting from the USB the Apple logo and the progress bar appears. Shortly after a “no stop” sign appears - and that is it. Can you help?
Incase someone runs into the same issue as me. I'm using an Asus TUF Z390M PRO with the intel iGPU and I was getting a kernel panic trying to boot clover to get to the installer. The issue was I had to increase the DVMT Pre-Allocated from 32M to 64M
Thank you for this. I have an Asus Z170-P D3 motherboard with an i5 6500. I have to manually set my ram to DDR3 1333 since I have a mixture of 1333 and 1600 dimms. Normally Windows 10 and Ubuntu have little issues with my ram setup, but macOS is very particular. I’ll try these other settings to see if I can get Catalina to boot after installation. I’m getting a kernel panic early in the boot. I’m suspecting USB or the Intel 530 HD.
I manage to install the opencore High Sierra on my i7 3770 + p8z77-v + 16gb ram + gtx 970. My nvidia driver is not enable tho even after install cuda driver and nvidia control panel. In cuda driver, it says gpu device not found. What should i actually do? Any help much appreciated 😅.
Hello, I have been using a hackintosh based on an ASUS Prime Z390-a for several months and it worked perfectly. Now I plan to upgrade to Mac Os Big Sur. In order to do it, I use a second SSD drive on which Clover 5126 is installed (it is a test drive). I keep Clover 5122 on my main Disk I use to work. with In order to get the BIOS Settings working, I would try to Clear the CMOS but I am scarred that if I do this I could still not have access to BIOS Settings and would loose the capacity to work with my hackintosh. What do you think ?
Hi Teresa, I have followed a few of your videos but I haven’t been able to boot my new hack. I have tried for over two weeks but with no luck. Please help!
Hi I have installed Win 7 on imac 2011 i7 via VMWare on external drive request I modify BIOS how do I access the BIOS, where or what do I do? thanks if you can help
Hi Teresa. I have an old Asus motherboard P8Z68-V LX and I have i7 3770 CPU (Ivy bridge). In the BIOS there is less setup options than on a new Asus motherboard...like yours. In this moments I use the Montain Lion OSX on my Hackintosh. My question is...can I do the "vanilla installation" with Mojave ...with this old config? Or the Mojave no longer supports this old configuration? I use this Hack my music production...so I don't wanna lost the Montain Lion OSX...if I do an new BIOS setup and take a try for Mojave...and I do not succeed in the end... Thank You the answer! :-)
Hi. I follow each step and now when it reboot I have a black screen. Impossible to see the bios :/ I run a Maximus X hero with a Sapphire RX580 pulse 8go any idea? I found every think except Primary Display: I have only 3choice: Auto / IGFX / PEG
For Maximus X hero + RX580 Pulse: AI Overclocker Tuner > X.M.P. Extreme Tweeking > Enable System Agent (SA) Configuration > Graphics Configuration > Primary Display > PEG USB Configuration > Legacy USB Support > Enabled USB Configuration > Keyboard and Mouse Simulation > Disabled APM Configuration > Power on by PCI - E/PCI > Disabled Fast Boot > Disabled Boot Logo Display > Disabled Secure Boot > OS Type > Other OS Exit > Save Changes
Hello again ! I build my Hackintosh and everything is rolling great thanks to you !! The only issue I am facing right now is the thunderbolt. It's not recognize ... have you made a video about it ? Thanks a lot !
Hi, thank you very much for your type. I've been studying how to do it for almost a month, and I can't install it, I have an ASUS Z390-P I could install it on a 2012 laptop computer (without audio and video) and I can't get it to work on the desktop PC. I followed your setup bios carefully, any other suggestions? Thanks since now!
In the configuration with matching SMBIOS and dedicated GPU the Multi-Monitor option is mandatory for getting encoding acceleration. Sorry I am a little confused here. Can you rephrase this? It would be very helpful. Thanks a lot!
Please help me Having issue while installing monetary mac os using hankintosh Error "installation cannot proceed because the installer is damaged" Please help many time i try and change bios setting but not working
Hi Teresa. I'm still waiting for the video teaching how to get USB ports working perfectly in Hackintosh. I like your idea and I think you help people doing these specified configurations but that video would be convenient for all of us. Thank you for all your work, you helped me a lot with hackintosh already.
you're welcome Alejandro. Yes I'm working on the video, but time is my enemy, day still have only 24 hours, I have lot of work. But I do my best and as you can see - each weekend I'm releasing new videos on regular basis. If I would have XXXX money or more support from people, I could do videos on full time, so faster and more videos weekly.
Hay whts up I'm haveing a Asus Z390 E gaming motherboards and i9 9900k and 16 gb corsair 3200hz ram nd 500 gb hdd 7200 rpm ... Im not able to boot the mac even after setting up the boot config.. but i dont have access to a mac i use tansmac to make a bootable usb. any help
I had an inside, will it be possible to rewrite the bios of a gigabyte motherboard or another for her to think to be an apple? consists of removing the bios from the motherboard and using an eprom rewriter to download the chip to the computer, on the computer with a hex editor change vendor, sn, model ... rewrite and solder again on the motherboard so that the system can be installed natively without the need for software gimmicks. Have you ever thought about it? a challenge in both ein?
I couldn't get it ..I bought everything yesterday and i9 9900k and the motherboard Z390-A and I updated the bios like you said ..did you update your bios?if you did can you send me your bios..on a note so i can get my hackintosh working thenks ..by the way i followed your video , but no go ..can you please help me thanks so much..
hello ! very nice video thanks ! So I have Asus tuf Z390 and I have a problem for install mackintosh on my pc with I7 9700K ... have you tips for this config for option or ketxt ? thanks
hi i did all the procedures on my Asus Z170 Maximus VIII Formula. hack installed and everything working with the high sierra system and EVGA GeForce GTX1070 Gaming but the system does not activate GTX or the on board in video rendering. use the APP istat Menus for monitors if the 2 are being used but none of them activate the graphics processors. help me!
Very good video Teresa! I would really appreciate it if you would make a video with the steps to update a vanilla hackintosh installation, because during the process, new boot options appear in Clover and I do not know which one to select for the system to update correctly. Thank you in advance!
if your Hackintosh is really clean vanilla, then you should have no problem to update now to 10.14.3 for example. I post info about it about a week ago on my FB group. But always have a backup!
First of all respect for what ur doing. I have i questions that is killing me figure out the problem on my hackintosh build. I have an Asus z270m Plus with an i5-6500 Skylake. i followed a guy guide which already had some EFI folders alredy builded for many CPU arcitectures. Now i have corretly installe macOS Ventura and it turns out all the usb 3.0 ports are regonized as 2.0 which makes very dificult to connect 3.0 usb devices on it, everything alse so far works perfetly on my hackintosh. I would really appriciate any advice of any tool i can use to fix this based on your experience. Again thaks a lot in advance.
Very cool video, congratulations. Unfortunately I tried to do with my motherboard ASUS B75M PLUS but could not. Do you know if it works on that motherboard?
I never had the motherboard you chose in my hands for testing, but in general it should work. My tutorial is general one for Asus motherboards. Don't forget you need also correct bios version...
Thanks so much for this video! I tried it with my Z390-I, however I don't have the Graphics Configuration option. Is that because I'm using a 9700KF which doesn't support onboard graphics?
Hi, im looking into building a hackintosh just for basic use (internet etc..) but i want facetime and imessage . is that possible? and is there some low end only new parts hackintosh? Thanks
ASUS TUF Z390-Plus .Morning...Can this board work as part of a hackintosh? I like the factor that its a tuf meaning it can resist energy discharges when the light goes up or down. Thanks
Hello, I'm trying to make it work, the DVI port on the integrated Intel UHD 630 video card, my motherboard is an ASUS Prime Z370M Plus II, with I7 8700 processor, have any tips?
Hello, I followed your guides to get my hackintosh working but for some reason when I connect a second monitor via display port, it does not work... Any solutions?
people why don't you simply include all detailed informations and HWspecs directly to your initial post? I'm trying to help to as many people I can, but you are doing it for me more complicated. I really don't have time to ask you again and again for more and more details. :( So no, I can't have solution.
Would these settings allow me to dual boot both OSX and Windows 10 that I have on separate drives? Would Windows 10 still be bootable or would the settings need to be changed back prior? Thanks!
After following these settings for asus z370 prime plus ll I am getting a black screen. No input. Out of the box settings I could get to bios. Now black screen of death. How might I reset bios setting?
Greetings from Downunder Oz after all the fires have been extinguished by rain. can you use an ASUS H81M-PLUS motherboard as a Hackintosh?. It is i7 3600 with 16Gb RAM
Hi, thank you for the video, I have a build with asus prime b450-plus MOBO, we have the same uefi, I installed windows 10 pro on it. My problem is that I can't access bios, after turning on my pc I have a black screen(HDMI) with not connected message, after few seconds I will have my windows logon screen and I can log with no pbm. I tried the good keys (F2 & DEL), tried to access the uefi from windows (the fast boot is off) , tried to clear the cmos by removing the battery, connecting the CLRTC pins, I used ps/2 and usb keyboard and still not working. I will be very grateful if you have something that can help me. Thank you again.
Hi Teresa, I have follow your guide, but don’t work my Mojave hackintosh: I have Asus Prime z390-a Ballistix sport lt 2666 (8+8gb) CPU Intel i5 8400 Without graphic card When Beginning clover process, after 5” it stop with black screen and words white and ++++++++++++++++++++++++++++++++++ Can you help me? Can you give me the clover and bios setting for my configuration?
Thank you for giving me great information. It's been years that I wanted to make one, never build a computer so I was scared to do it. Now I'm learning more and hopefully soon I can make one. I have a couple of Macs and it's getting to expensive to upgrade. I hope you will do more tutorial for a mid-range video and photoshop users.
more tutorial depends on more support from people. I'm really not a millionaire to buy all possible mainboards, cpus etc. to make tutorials about quite everything and quit my job just to shoot videos for people. I have no problem to shoot some specific tutorial on demand, but without support it's not possible.
I'm looking for a system for 4k video editing. I've got a bunch of projects to finish and I'm using a 2014 15"rMBP with intel graphics. Do you think I could build a powerful H@ckintosh with AMD graphic for 800 or less?
Thank you, I since figured it out. Could you also do a tutorial on how to go about an update with a vanilla installation(since Mojave 10.14.3 came out recently).
I was runing Hackintoshes since 10.14 system, so also long before my channel existed. And fact you said you were running "hackintoshes for years before your channel existed " and you still didn't know this basic fact just tells how bad your knowledge in this territory is :) So don't make a superhero from yourself
@@MorgonautHackintosh oh it‘s OS X do that ? It’s great。but I have Win10 and ubuntu 18.04 on my notebook and I don't want that settings influence my other OS on using virtrual machine soft。
Thank you very much! Today I got a new PC with Asus Z370-P and I couldn't get it to boot to Hackintosh, your settings made it work and it runs faster than Windows!
you're welcome. I'm glad my tutorial helped you.
What is a GPU in your PC?
@@maxturner4259 It's an iGPU
I did the setting exactly still no boot
win is faster than MacOs, it is not velocity the point of "Apple" systems
You are becoming the authoritative source for Hackintosh information. THx.
Thank you. I was always that, but you just didn't know me :)
True! This year I will be building my Hackintosh. Probably to do a little bit of 4K video editing.
@@MorgonautHackintosh
I prepare some tutorials about video editing hackintoshes too. And lot of video editing tutorials. Stay tuned on my both YT channels.
@@MorgonautHackintosh lol , you take tutorials for others discord and then u become the authoritative . Nice.
More like editing hackintosh video*
Thank you! I've been without my hackintosh for 2 days after a failed upgrade to 10.15.4, and even a new drive and fresh installation failed. Using your settings I'm now in! Seriously, I can't thank you enough! (I will tip though!)
Glad I could help
Thanks Teresa! Good results here with these settings, also with an old P7H55 that was having random restarts.
you're welcome Fabrizio
Hello I have a problem with the installation of os Catalina, I have an Asus b360 pro gamer board, in the first installation when I prepare disk with the disk utility, I give a disk installation but the installation never ends, it freezes in less than one remaining minute
Morgonaut, many thank you for posting this. My Asus Prime X570 bios isn't exactly like the one you posted- do you have a written article I can check for settings for the Asus X570 Pro motherboard? Thanks again- great job!!
I tried those settings on my Asus Prime Z390-p mb and i get an error starting up
After enabling these setting I can't go to my bios Please help
Hi , I from Brazil !
The B360m Plus Gamming Asus is Compatible with Mojave ???
Sorry my English ...
Thanks
Thanks, you’re videos are great. I’ve got an old Haswell NUC Hackintosh. Not directly related to this video, but in general all your videos are well put together and have given me a greater understanding of Hackintosh.
Have a great day
you're welcome Dylan, enjoy
Hi Teresa.
It would be very nice, to make a mini itx hackintosh build,
or recommend us, a mini itx board in place of your Asus Prime Z370-A board you use in your built.
mini itx advantages are so many...
lightweight, small size, you can even throw it in your back pack and take it with you where ever you go!
With a bluetooth mouse and keyboard!
ITX is in minority, I must do videos for majority so I don't do any ITX builds, it's simply not so common and it's stripped down
did you get to make the video to configure the thunderbolt? I have a thunderboltex 3 and after installing Monterey, it unconfigured everything. My mobo is the same as the one you used in the video.
I don't have that specific motherboard for long time
Thank You for your Videos from India,Tamilnadu.
Also from kerala
Hi Teresa. I have the ASUS Prime Z-370P motherboard and got my Hackintosh working after fumbling around a bit. That was b4 I discovered your channel, which is amazing BTW. For M.2, my BIOS only has settings for M.2_1 configuration but yours has M.2_2 PCIe Bandwidth Configuration as well? I do have M.2 drive installed in my setup.
Theresa, do you know if the Asus PRIME Z370-A II is good as well for this clover configuration? Thanks for the tutorial 👍🏻
I didn't tested it personaly, but it should not be much different from the Z370-A I recommend and tested and verified.
@@MorgonautHackintosh thanks again
you're welcome Mirko
I build my hackintosh with Asus Prime Z370-A II, and it runs very well (Mojave, i7, 32gb ram, Radeon RX 580, Samsung EVO970, bios version updated from original until "1202" (last one), Morgonaut tweaked EFI etc, etc). Very fast and runs any applications softly. No problems.
But... there are no crapy, cheap USB keyboard to let me enter on BIOS setup! Any advices?
@@jrbc2013 did you solve this issue? I have almost identical gear, and i cannot enter to Bios anymore? I got black screen after pressing F2 or Del key
Hi. I followed the best I could. My hackintosh installer keeps restarting my computer. I’ve got an asus x299 motherboard and gtx1080, High Sierra and on a Seagate sata ssd. I get in to clover and I go to the Mac installer and it shows the apple logo then restarts. Verbose Mode it freezes or restarts itself at the same point just after the finalizebootstructure seeds.
In this video, you said you will make a video for supporting Thunderbolt support. But I can't find any video of that.
because I completely ditched asus motherboards, and I recommend that everybody
@@MorgonautHackintosh If you have any motherboard having Thunderbolt port, then please make a video of Thunderbolt support in Hackintosh.
I made already my 14-core imac pro killer which has thunderbolt 3 - just watch my videos better
i think secure boot key should be clean unless clover uefi won't boot. what do u think??
Hello, great video! I have bought a more recent asus prime h510 and i cant make it boot for nothing 😞 i think its cuz somethig on bios…but it seens a little different than the video some things (and some i just could not find it 😭😭) im a begginer on hackbuilds…so i tried to use a prebuilt version and so far i could reach half bar before it frozen screen or reset 😞
rather watch my video about the "New Way", that works easily almost on any hardware ruclips.net/video/lztH7BUxIoM/видео.html
Great start up video :) Since the changes my screen resolution has shrunk on the monitor using the PCI Graphics card which the monitor was running fine on before these BIOS changes, any ideas?
Looks like only on the BIOS screen :)
What's the better option, a motherboard with integrated WiFi or just adding an adapter to a cheaper motherboard?
never integrated
@@MorgonautHackintosh wow you reply fast thank you! Big fan. I just needed to know sense I'm looking into buying a gigabyte or Asus motherboard for my first time build and I'm noticing that WiFi boards are more expensive so I should just save the money and buy an adapter!
Can I do this whilst using windows? Or only when I am about to install MAC OS? Because once I did it, I couldn't load windows anymore and I had to force reset it.
I have ASUS ROG STRIX Z390-E GAMING can you help me whats the bios config ?
Great resource here Theresa, thank you! Following your vanilla guide I have been successful getting a running High Sierra machine (I have the GTX 1080ti). Only thing not working is Bluetooth for things like Handoff, Airdrop, Continuity, Universal Clipboard, Instant Hotspot, Apple Watch unlock, etc. I have the Asus 370 ROG Maximus X Hero (Wi-Fi AC) board which has a Bluetooth V4.2 chip built in. Is this supported natively or is it required to get the Broadcom BCM94360CS2 card for these Apple BT features? I have no need for Wi-Fi (using wired ethernet connection) just Bluetooth.
quite NO wifi/bt chips on pc boards are compatible, so you need to swap it for compatible ones
@@MorgonautHackintosh Wow thanks for the very quick reply. Just to confirm, the on-board wifi/bt chip is NOT compatible and I would need to replace it with the Broadcom BCM94360CS2. Do you know if that chipset is the easiest/most compatible Bluetooth option?
The BCM94360CS2 is compatible. Just make sure you have the correct socket for it or correct adapter based on which size you will get
hey Morgonaut! can i please have one of you good nvidia graphics cards instead of pc ?
Nice and clear instructions.
I have install mojave on my ASUS Prime B350 Plus (Ryzen 5 1600,Vega 56), and it runs perfectly ;)
i got osx snow leopard running on lenovo , pentium g630- onboard hd chess app sluggish - no graphics acceleration - the hmdi connector may make a difference - i tried celeron 847 no luck - perhaps osx tiger might work.
few yrs back did osx tiger on pentium 4 - northwood quite good -is a pc lattep4 plus -celeron worked..northwood..
Hello there Morgonaut, what Intel 10th Gen motherboard can I use for big sur hackintosh build? Thank you
NOBODY TEACHES THAT STEP!!!! THAAAAAANK YOU SOOOO MUCH! Tomorrow i'll try again... for the fifth time...
you're welcome Vinicius
hey, can you do video on AsRock bios settings please? I have ASrock x470 master sli and still can't get it up and running
May u help me to install catalina in asus z490m plus motherboard? this setup is not working in this motherboard
First of all, thank you so much for all the precious information contained in your videos. I am trying to make a hackintosh with an Desktop Asus Vivo PC K31CD --- MB H110-i32CD4 / DP ---- CPU i5 6400 Skylake------DDR4 4go- --------INTEL HD 530-GPU integrated + GPU Nvidia Kepler GT 2go
one of the great difficulties for me is that MB's Bios does not show me the same possibilities of adjustments that appear in your video.please would you have any suggestions so that i can make the same changes? thank you
Hi! After setting the bios with your instructions, I can't anymore see my SSD in Mojave installer / disk utility, even when show all devices is selected. I'm not sure it shows even in bios, as it's my first time running this mobo. What is wrong ? The SSD was even formatted in other Hackintosh / Disk utility. I got Asus Prime Z370-A mobo with i3-8100, and Kingston SA400 Sata SSD.
hard to guess. I have same motherboard, also i3 and it can see all my SSDs / NVMes without any problem
@@MorgonautHackintosh Nevermind...
I switched SATA port & cable, and now it works. Could be faulty cable. Phew. Thanks for quick reply though. Keep up the amazing work.
Hellow, thank you for your video, i have à big problème with my pc, many years, when i expot by Davinci Resolve générale blue screen, process died, can i do the same like you? I have Asus X 299 sage 10GB. Or do have a video for this motherboard? Thank you in advance, must i put Fan by Auto?
@momobestE - of course you do the same as me if you are same skilled as me :) If not you can always get my personal one on one help and video call with me - links are in video description
there are terms of the motherboard in the bios which does not resemble the one shown in the video, and does not exist. I updated the Bios and did as you said, but the computer stuttered, strange, I add I have an I9 7980XE with 256 GB memory, an RX 3090, Samsung 990 Nmv2. but, it is not fast on Davinci Resolve Studio, the memory remains by default on 2666 MHz, so the processor does not exceed 2.6. could you help me? I am a subscriber to you. THANKS
@momobestE - as I said my help starts in video description on those two links. Only then I can help you personally
hi what is the software for bios screen record ? pls thx
that's not any software, that's capture card, hdmi splitter, blackmagic decklink ingest card
Hi,
Did you install Catalina on this motherboard? if yes, could you please make a video on how to do it. (A to Z)
Thanks
yes I did run catalina on this motherboard. And no, I will not produce a video about how to do it, because it's old motherboard and Catalina is several generations old system, to make a video for 1 person is not worth it
Hi,
Thanks for your reply.
Can you make a video of preparing a USB Catalina?
Thanks again and have a nice time.
I already did! It's the same as for Mojave and in video description is command for catalina. Are you aware I don't have only single video right? :(
I'm sorry if I gave you a headache. I have an Asus motherboard where the operation of the Mojave system is easy to install, but when I try to install Catalina, it loads USB halfway. Do you have an opinion?
Thanks again for your reply.
without deep inspection I can't say anything why you have this problem. Did you update your EFI?
As long as I use same motherboard and graphics. The RAM and SSD that I use will work with Clover folders?
All these settings should be done before you install Mac drive?
before install
Hi, do you have any suggestion if I can't find 'fast boot' or 'secure boot' in my bios settings? My board is ASUS P8P67 LE with the latest updated 3801 version. Really appreciate your help.
gl702v asus laptop i have but i can't setup the hackintos. Little help please .tried so many versions
I have an ASUS TUF X299 Mark 2 motherboard with BIOS ver. 1902. I use Intel Core i9-9900X CPU, Intel 512 GB M.2 SSD, and Sapphire Pulse Radeon RX580 graphics Card. Using your BIOS Settings does not work. I can load Clover, but when booting from the USB the Apple logo and the progress bar appears. Shortly after a “no stop” sign appears - and that is it. Can you help?
Hello,
I have a Asus Z97A with i7 4790k. I can’t seem to get into the installer for Catalina. Any tips you could share?
Incase someone runs into the same issue as me. I'm using an Asus TUF Z390M PRO with the intel iGPU and I was getting a kernel panic trying to boot clover to get to the installer. The issue was I had to increase the DVMT Pre-Allocated from 32M to 64M
Thank you for this.
I have an Asus Z170-P D3 motherboard with an i5 6500.
I have to manually set my ram to DDR3 1333 since I have a mixture of 1333 and 1600 dimms. Normally Windows 10 and Ubuntu have little issues with my ram setup, but macOS is very particular.
I’ll try these other settings to see if I can get Catalina to boot after installation. I’m getting a kernel panic early in the boot. I’m suspecting USB or the Intel 530 HD.
I manage to install the opencore High Sierra on my i7 3770 + p8z77-v + 16gb ram + gtx 970. My nvidia driver is not enable tho even after install cuda driver and nvidia control panel. In cuda driver, it says gpu device not found. What should i actually do? Any help much appreciated 😅.
Hello,
I have been using a hackintosh based on an ASUS Prime Z390-a for several months and it worked perfectly. Now I plan to upgrade to Mac Os Big Sur. In order to do it, I use a second SSD drive on which Clover 5126 is installed (it is a test drive). I keep Clover 5122 on my main Disk I use to work.
with
In order to get the BIOS Settings working, I would try to Clear the CMOS but I am scarred that if I do this I could still not have access to BIOS Settings and would loose the capacity to work with my hackintosh.
What do you think ?
Hi Teresa, I have followed a few of your videos but I haven’t been able to boot my new hack. I have tried for over two weeks but with no luck. Please help!
Hi I have installed Win 7 on imac 2011 i7 via VMWare on external drive request I modify BIOS how do I access the BIOS, where or what do I do? thanks if you can help
Hi Teresa.
I have an old Asus motherboard P8Z68-V LX and I have i7 3770 CPU (Ivy bridge). In the BIOS there is less setup options than on a new Asus motherboard...like yours.
In this moments I use the Montain Lion OSX on my Hackintosh.
My question is...can I do the "vanilla installation" with Mojave ...with this old config? Or the Mojave no longer supports this old configuration?
I use this Hack my music production...so I don't wanna lost the Montain Lion OSX...if I do an new BIOS setup and take a try for Mojave...and I do not succeed in the end...
Thank You the answer! :-)
3770 is supported in Mojave. Old config will useless most probably, you need new one. Also you need supported GPU
Thanx! :-) @@MorgonautHackintosh
The Gigabyte GeForce GTX 1050TI 4 GB OC Low Profile is a supported GPU in Mojave?
Because I bought it...already
No, no drivers for those cards in Mojave, only for Kepler. I say in my vanilla video tutorial - "do research before buying components" - you didn't :(
OK, unfortunatelly. So you can still run this card under High Sierra
Can you help with Asus prime b560-a, i cant find the option to disable secure boot
Hi. I follow each step and now when it reboot I have a black screen. Impossible to see the bios :/ I run a Maximus X hero with a Sapphire RX580 pulse 8go any idea? I found every think except Primary Display: I have only 3choice: Auto / IGFX / PEG
yes, those are the choices
For Maximus X hero + RX580 Pulse:
AI Overclocker Tuner > X.M.P.
Extreme Tweeking > Enable
System Agent (SA) Configuration > Graphics Configuration > Primary Display > PEG
USB Configuration > Legacy USB Support > Enabled
USB Configuration > Keyboard and Mouse Simulation > Disabled
APM Configuration > Power on by PCI - E/PCI > Disabled
Fast Boot > Disabled
Boot Logo Display > Disabled
Secure Boot > OS Type > Other OS
Exit > Save Changes
also enable igpu and disable CSM
Hello again ! I build my Hackintosh and everything is rolling great thanks to you !! The only issue I am facing right now is the thunderbolt. It's not recognize ... have you made a video about it ? Thanks a lot !
Damn, i followed exactly what you said and now it wont boot, it goes straight to bios. Please help
Hi, thank you very much for your type. I've been studying how to do it for almost a month, and I can't install it, I have an ASUS Z390-P I could install it on a 2012 laptop computer (without audio and video) and I can't get it to work on the desktop PC.
I followed your setup bios carefully, any other suggestions? Thanks since now!
google
In the configuration with matching SMBIOS and dedicated GPU the Multi-Monitor option is mandatory for getting encoding acceleration. Sorry I am a little confused here. Can you rephrase this? It would be very helpful. Thanks a lot!
no, that's not true
you don't have to delete your posts if you believe you are right. I just said you are not right
Please help me Having issue while installing monetary mac os using hankintosh Error "installation cannot proceed because the installer is damaged"
Please help many time i try and change bios setting but not working
Hi Teresa. I'm still waiting for the video teaching how to get USB ports working perfectly in Hackintosh. I like your idea and I think you help people doing these specified configurations but that video would be convenient for all of us.
Thank you for all your work, you helped me a lot with hackintosh already.
you're welcome Alejandro. Yes I'm working on the video, but time is my enemy, day still have only 24 hours, I have lot of work. But I do my best and as you can see - each weekend I'm releasing new videos on regular basis. If I would have XXXX money or more support from people, I could do videos on full time, so faster and more videos weekly.
Hay whts up I'm haveing a Asus Z390 E gaming motherboards and i9 9900k and 16 gb corsair 3200hz ram nd 500 gb hdd 7200 rpm ... Im not able to boot the mac even after setting up the boot config.. but i dont have access to a mac i use tansmac to make a bootable usb. any help
Hi morgonaut mam .Can I use a asus z170 k motherboard for Mojave 10.14.6
I had an inside, will it be possible to rewrite the bios of a gigabyte motherboard or another for her to think to be an apple?
consists of removing the bios from the motherboard and using an eprom rewriter to download the chip to the computer, on the computer with a hex editor change vendor, sn, model ... rewrite and solder again on the motherboard so that the system can be installed natively without the need for software gimmicks. Have you ever thought about it? a challenge in both ein?
google for ozmosis
@@MorgonautHackintosh Wow how cool, I will search. Have you thought about making a video about it? Thanks!!
I couldn't get it ..I bought everything yesterday and i9 9900k and the motherboard Z390-A and I updated the bios like you said ..did you update your bios?if you did can you send me your bios..on a note so i can get my hackintosh working thenks ..by the way i followed your video , but no go ..can you please help me thanks so much..
Do you think this tutorial on an Z390-E Gaming motherboard? Thank you!
no
Do I do this before or after I install mac os?
it's a first step, otherwise macos will not even boot! Think
@@MorgonautHackintosh of course! Thank you :)
Hey thanks,
Can i use the settings for asus Rog Strix H370 F Gaming Motherboard?
those are general settings for all Asus boards. Of course each motherboard have it's own some specific settings
hello ! very nice video thanks ! So I have Asus tuf Z390 and I have a problem for install mackintosh on my pc with I7 9700K ... have you tips for this config for option or ketxt ? thanks
hi i did all the procedures on my Asus Z170 Maximus VIII Formula.
hack installed and everything working with the high sierra system and EVGA GeForce GTX1070 Gaming but the system does not activate GTX or the on board in video rendering.
use the APP istat Menus for monitors if the 2 are being used but none of them activate the graphics processors.
help me!
install nvidia webdriver
Very good video Teresa!
I would really appreciate it if you would make a video with the steps to update a vanilla hackintosh installation, because during the process, new boot options appear in Clover and I do not know which one to select for the system to update correctly. Thank you in advance!
if your Hackintosh is really clean vanilla, then you should have no problem to update now to 10.14.3 for example. I post info about it about a week ago on my FB group. But always have a backup!
@@MorgonautHackintosh Could you pass the URL of the thread? Thank you!
Can I assume most of these bios settings would be the same for Z390?
principle is the same
First of all respect for what ur doing. I have i questions that is killing me figure out the problem on my hackintosh build. I have an Asus z270m Plus with an i5-6500 Skylake. i followed a guy guide which already had some EFI folders alredy builded for many CPU arcitectures. Now i have corretly installe macOS Ventura and it turns out all the usb 3.0 ports are regonized as 2.0 which makes very dificult to connect 3.0 usb devices on it, everything alse so far works perfetly on my hackintosh. I would really appriciate any advice of any tool i can use to fix this based on your experience. Again thaks a lot in advance.
Hi Teresa.. i cant unable xmp the only choise that i have is "disable" any suggest? tnx in advance
maybe you have some weird memory withou xmp profile, but that would be rare
@@MorgonautHackintosh Z390M - 2x8gb - rx580 ..ill try to reset the mobo bios and try again. thank u very much for ur fast answer.
Asrock b460m-hdv motherboard support hackintosh
i7 10 gention prosesser
16gb ram
Thanks really helpful. Can you share me a SONOMA build to install on prime Z-390 P board?
@sjainuniable - if you would watch my videos you would know all builds I shared on my channel in past several years can run on your motherboard too
I can try this with Asus saberthoot 990FX and AMD FX9590 32gb 1800mhz???? or what you recomend. thanks
Very cool video, congratulations. Unfortunately I tried to do with my motherboard ASUS B75M PLUS but could not. Do you know if it works on that motherboard?
I never had the motherboard you chose in my hands for testing, but in general it should work. My tutorial is general one for Asus motherboards. Don't forget you need also correct bios version...
@@MorgonautHackintosh I did the whole procedure, only that some items do not appear in it. Still thank you very much
Thanks so much for this video! I tried it with my Z390-I, however I don't have the Graphics Configuration option. Is that because I'm using a 9700KF which doesn't support onboard graphics?
exactly :)
Morgonaut thanks for letting me know! Will this cause problems with installation? I haven’t been able to get past the Apple logo progress bar screen.
Does MSI Gaming M5 Enthusiast motherboard have support for hackintosh High Sierra with Nvidia GTX 1070 graphic card ?
Hi, im looking into building a hackintosh just for basic use (internet etc..) but i want facetime and imessage . is that possible? and is there some low end only new parts hackintosh? Thanks
yes it is possible. All my builds I introduced on my channel can have working iMessages etc.
ASUS TUF Z390-Plus .Morning...Can this board work as part of a hackintosh? I like the factor that its a tuf meaning it can resist energy discharges when the light goes up or down. Thanks
I never tested the board you mentioned
Hello, I'm trying to make it work, the DVI port on the integrated Intel UHD 630 video card, my motherboard is an ASUS Prime Z370M Plus II, with I7 8700 processor, have any tips?
Hello, I followed your guides to get my hackintosh working but for some reason when I connect a second monitor via display port, it does not work... Any solutions?
people why don't you simply include all detailed informations and HWspecs directly to your initial post? I'm trying to help to as many people I can, but you are doing it for me more complicated. I really don't have time to ask you again and again for more and more details. :( So no, I can't have solution.
Does it work's with "asus prime z390 m plus" motherboard
Would these settings allow me to dual boot both OSX and Windows 10 that I have on separate drives? Would Windows 10 still be bootable or would the settings need to be changed back prior? Thanks!
better first watch my video about dual boot before you will do that stupid thing as dual boot
@@MorgonautHackintosh I will. Why do you consider dual booting from two different drives stupid?
I watched the first video and that makes sense. Grazie!
You should install the nvme in m2 slot 1 for the heatsink cooler
that cooler is degrading NVMe longevity, so recommend not to use it
@@MorgonautHackintosh Thank you so much, i didn't know that was a thing. More information if anyone wants ruclips.net/video/KzSIfxHppPY/видео.html
so now you know why I don't use that heatsink and don't recommend to use it. In another words - don't teach an Eagle to fly :)
After following these settings for asus z370 prime plus ll I am getting a black screen. No input. Out of the box settings I could get to bios. Now black screen of death. How might I reset bios setting?
in your motherboards manual look for reset CMOS
Greetings from Downunder Oz after all the fires have been extinguished by rain.
can you use an ASUS H81M-PLUS motherboard as a Hackintosh?. It is i7 3600 with 16Gb RAM
hey, would this work with b85 pro gamer?
Hi, thank you for the video, I have a build with asus prime b450-plus MOBO, we have the same uefi, I installed windows 10 pro on it.
My problem is that I can't access bios, after turning on my pc I have a black screen(HDMI) with not connected message, after few seconds I will have my windows logon screen and I can log with no pbm.
I tried the good keys (F2 & DEL), tried to access the uefi from windows (the fast boot is off) , tried to clear the cmos by removing the battery, connecting the CLRTC pins, I used ps/2 and usb keyboard and still not working.
I will be very grateful if you have something that can help me.
Thank you again.
How to better in Asus z390 and gigabyte 390 in hackintosh
Margo I will like to know how fix black screen after log out
Hi Teresa,
I have follow your guide, but don’t work my Mojave hackintosh:
I have Asus Prime z390-a
Ballistix sport lt 2666 (8+8gb)
CPU Intel i5 8400
Without graphic card
When Beginning clover process, after 5” it stop with black screen and words white and ++++++++++++++++++++++++++++++++++
Can you help me?
Can you give me the clover and bios setting for my configuration?
read video description here ruclips.net/video/XfSLkjIlvj0/видео.html
Nice video and nice Blues by the way
thank you
Thank you for giving me great information. It's been years that I wanted to make one, never build a computer so I was scared to do it. Now I'm learning more and hopefully soon I can make one. I have a couple of Macs and it's getting to expensive to upgrade. I hope you will do more tutorial for a mid-range video and photoshop users.
more tutorial depends on more support from people. I'm really not a millionaire to buy all possible mainboards, cpus etc. to make tutorials about quite everything and quit my job just to shoot videos for people. I have no problem to shoot some specific tutorial on demand, but without support it's not possible.
I'm looking for a system for 4k video editing. I've got a bunch of projects to finish and I'm using a 2014 15"rMBP with intel graphics. Do you think I could build a powerful H@ckintosh with AMD graphic for 800 or less?
forget AMD cpus, go Intel only. For $800 you can absolutely build nice 4k editing machine
Hii ... I have msi gv 62 notebook.. it's support hackintosh??? Please make video on msi
Hi, I don't know your notebook. You should first watch my tutorial: ruclips.net/video/fA9AotXqkqA/видео.html and what I say about laptops vs newbies
MSI GV 62 7RD gaming notebook... Intel i7 7th gen ,8 GB RAM ,1TBhdd ,nvidia1050 4gb graphics..
hi, i fail to install catalina even after multiple times. please help
please do tutorial on how to put theme on clover.
copy theme to Themes folder and set it's name in config, that's all
Thank you, I since figured it out. Could you also do a tutorial on how to go about an update with a vanilla installation(since Mojave 10.14.3 came out recently).
if you hackintosh is clean vanilla, then you should have no problems update as I confirmed on my Facebook group week ago. But always have a backup
ages? all you have to do is to watch my video how to backups hackintosh, I covered everything there
I was runing Hackintoshes since 10.14 system, so also long before my channel existed. And fact you said you were running "hackintoshes for years before your channel existed " and you still didn't know this basic fact just tells how bad your knowledge in this territory is :) So don't make a superhero from yourself
I havn't start my hacintosh yet, so the CPU Virtualization and VT-d can be able to enabled after install hacintosh completely ?
you can control it in config.plist, so you don't need to disable it in bios
@@MorgonautHackintosh oh it‘s OS X do that ? It’s great。but I have Win10 and ubuntu 18.04 on my notebook and I don't want that settings influence my other OS on using virtrual machine soft。
virtual machine is not hackintosh
@@MorgonautHackintosh I mean I‘ll build a triple boot( Win10, Ubuntu and OS X) for my notebook, not install OS X on virtual machine soft。
Does this work for asus prime z490a?
thank you for this detail explanation :)
you're welcome Suzaidee