Yes sir! I have already watched the install video. All I have to do now if find a new place for my baja designs 20” led light bar which is mounted behind the lower grill in the same place. Any ideas?
What is the difference in adding a winch to the 6.4 vs. the 6.7 Cummins? Will the same procedure work? Just asking as I have the 6.7 Cummins and want to add a winch...
This should cheer you up. Diesel compatible option is now available - www.vicedesign.ca/collections/hidden-winch-mounts/products/hidden-winch-mount-5th-gen-2019-2024-ram-2500-3500-cummins
I'm from Québec! Nice vidéo! Where can I order all the brakets for my ram 3500 2022 single wheel. Sport package edition cummins HO. I will put warn vr evo 12-s. Thank. Hiden winch, like your video
finally have a kit for the diesel here: www.vicedesign.ca/collections/hidden-winch-mounts/products/hidden-winch-mount-5th-gen-2019-2024-ram-2500-3500-cummins
The light kit we sell comes with a wiring harness with built in relay. Follow the instructions that come with the winch, the leads will be connected directly to the battery terminal connectors. The winch uses contactors and does not require a relay.
I know its a year late but here's the diesel solution: www.vicedesign.ca/collections/hidden-winch-mounts/products/hidden-winch-mount-5th-gen-2019-2024-ram-2500-3500-cummins
The space was tight but we were able to make it work on the diesel! Here's the new kit installation video - ruclips.net/video/FzO8rn2MrCs/видео.htmlsi=unxSEuL96jQDbLOl
What did you guys do as far as securing the wiring? I saw the part where you fed them down to the winch, and hooked them up. I didn't see anything about securing them in some way.
I was wondering the same thing. I have to get under the truck and see if the winch mount will work with my Fisher MM2 setup. Can the control box be relocated to the passenger side? If the wires were long enough I could fab a custom bracket no problem. I know for a fact that space on the drivers side is packed with plow control components. Truck in question is a '21 Ram 3500 6.4, thanks!
Depends on which reference frame you view it. The winch still spools the same way, off the bottom of the drum - so If you hit the IN button on your winch, it still spools in. The feet are mounted such that they face the front of the truck, and by turning the winch 180 degrees, when viewing from the front of the truck, the winch appears to spool off the top.
About to release one for the 4th Gens (2013-2018). We're starting to work on a diesel version for the 2019-2024 Cummins. Keep an eye out here or on our website www.vicedesign.ca
here's a video for the diesel option - ruclips.net/video/FzO8rn2MrCs/видео.htmlsi=unxSEuL96jQDbLOl and if you want to buy one its available here: www.vicedesign.ca/collections/hidden-winch-mounts/products/hidden-winch-mount-5th-gen-2019-2024-ram-2500-3500-cummins
Would anybody happen to have the part # for the Power Wagon grill piece to install rather than cutting the original? Everyone wants a vin # to look it up.
There’s nothing new to this really a 25 minute video you do know that you can get the tradesmen with the power wagon package that has the winch behind the bumper
Looks great boys! Let me know when you have a solution for the diesel.
We finally have a solution: ruclips.net/video/FzO8rn2MrCs/видео.htmlsi=_bImBJg8GsiyXKFo
Yes sir! I have already watched the install video. All I have to do now if find a new place for my baja designs 20” led light bar which is mounted behind the lower grill in the same place. Any ideas?
@@philwilson3140 Working on a light hoop that goes above the bumper!
Glad ya’ll finally released this, Great job guys! Just in time for. Christmas…….
Nice, I want that hook mount for the 2013-2018 I just ordered. Good job.
Yup it comes with one!
YEEEES!!! Finally!!!
Work for the cummins option ?
Any chance you'll make a winch mount for 2022 ram 2500 diesel
It took a bit, but if you still have the truck you can get the diesel version here: ruclips.net/video/FzO8rn2MrCs/видео.htmlsi=_bImBJg8GsiyXKFo
But this wont work with my diesel?
I was thinking the same thing
@@garycruz4883 Good news is we have one that will work with your diesel! here's it is: ruclips.net/video/FzO8rn2MrCs/видео.html
What is the difference in adding a winch to the 6.4 vs. the 6.7 Cummins? Will the same procedure work? Just asking as I have the 6.7 Cummins and want to add a winch...
Intercooler and related components will interfere
Diesel Diesel Diesel!!!
What about the 5th gen with a Cummins?
Cummins is supported with our new kit shown here:
ruclips.net/video/FzO8rn2MrCs/видео.htmlsi=_bImBJg8GsiyXKFo
Please make a set up for the 2003 3rd gen dodge 2500 pleases
I am so bummed…why is it not compatible with the diesel??
This should cheer you up. Diesel compatible option is now available - www.vicedesign.ca/collections/hidden-winch-mounts/products/hidden-winch-mount-5th-gen-2019-2024-ram-2500-3500-cummins
Awesome initiative!
I'm from Québec! Nice vidéo! Where can I order all the brakets for my ram 3500 2022 single wheel. Sport package edition cummins HO. I will put warn vr evo 12-s. Thank. Hiden winch, like your video
Radius edge means rounded off edge
Nice Video fellas! Does this work for diesel models?
finally have a kit for the diesel here: www.vicedesign.ca/collections/hidden-winch-mounts/products/hidden-winch-mount-5th-gen-2019-2024-ram-2500-3500-cummins
Pin this! Make a video
What if I have a 3rd gen ram 2500 with the 5th gen 2500 front bumper fitted?? Which hidden install kit would I order?
Diesel diesel please diesel!!!
Getting prepped to install mine .. no relays needed for the winch or lights?
The light kit we sell comes with a wiring harness with built in relay. Follow the instructions that come with the winch, the leads will be connected directly to the battery terminal connectors. The winch uses contactors and does not require a relay.
Also looking for diesel solution.
I know its a year late but here's the diesel solution: www.vicedesign.ca/collections/hidden-winch-mounts/products/hidden-winch-mount-5th-gen-2019-2024-ram-2500-3500-cummins
No winch for the diesel?
The intercooler on a cummins is right where this sits
Funny how my AEV edition can manage to find room for a winch.
I even installed one in the rear bumper.
well yeah that uses an aftermarket front bumper, the whole point of a hidden winch mount is to keep the stock one@@johnkraft5640
@@johnkraft5640 the AEV uses a different front bumper? Which is an entirely different use case than this
The space was tight but we were able to make it work on the diesel! Here's the new kit installation video - ruclips.net/video/FzO8rn2MrCs/видео.htmlsi=unxSEuL96jQDbLOl
What did you guys do as far as securing the wiring?
I saw the part where you fed them down to the winch, and hooked them up. I didn't see anything about securing them in some way.
Secured the winch harness to the existing electrical wiring harness routing with zap straps.
Does your kit have enough slack to account for plow brackets?
Glad you're inspired! Yup theres room for 1/4 thick brackets. What plow do you have?
@@vicedesigninc I have a Western Ultramount on it now.
I was wondering the same thing. I have to get under the truck and see if the winch mount will work with my Fisher MM2 setup. Can the control box be relocated to the passenger side? If the wires were long enough I could fab a custom bracket no problem. I know for a fact that space on the drivers side is packed with plow control components. Truck in question is a '21 Ram 3500 6.4, thanks!
Will this fit the 2500 diesel version?
No
So this spools off the top now instead of the bottom, correct?
Depends on which reference frame you view it. The winch still spools the same way, off the bottom of the drum - so If you hit the IN button on your winch, it still spools in. The feet are mounted such that they face the front of the truck, and by turning the winch 180 degrees, when viewing from the front of the truck, the winch appears to spool off the top.
is there one for a diesel? thanks
Unfortunately not - the cummins intercooler and piping occupy the same space. No relocation kit available for that yet. Sorry!
Do you have one for diesel truck
About to release one for the 4th Gens (2013-2018). We're starting to work on a diesel version for the 2019-2024 Cummins. Keep an eye out here or on our website www.vicedesign.ca
here's a video for the diesel option - ruclips.net/video/FzO8rn2MrCs/видео.htmlsi=unxSEuL96jQDbLOl and if you want to buy one its available here: www.vicedesign.ca/collections/hidden-winch-mounts/products/hidden-winch-mount-5th-gen-2019-2024-ram-2500-3500-cummins
Do you sell a hidden winch for the 5th gen 1500’s?
you bet! Here's the rest of them: www.vicedesign.ca/collections/hidden-winch-mounts
What’s a 5th gen
It refers to the bodystyle. In this case its the 2019-2024 model year
Would anybody happen to have the part # for the Power Wagon grill piece to install rather than cutting the original? Everyone wants a vin # to look it up.
Did a bunch of digging and these should be them:
68384299AA - Winch Cutout, No Parking Sensor
68384298AA - Winch Cutout, Parking Sensors
If'n you need other PW accessories, Find a dealer online that has one in stock, new or used...there's your VIN. Copy and Paste
There’s nothing new to this really a 25 minute video you do know that you can get the tradesmen with the power wagon package that has the winch behind the bumper
I got a Power Wagon Winch cradle if anyone wants to buy it lol
@SeguroOffroad do you still have that cradle? Lol my truck is a 2022.
Over priced
Why would you buy a heavy duty gasser?
Will this work with the 2500 Rebel?
Yes it works with the 2500 Rebel Hemi