Here is a list of all the tools I used and if something is missing please let me know: Steel Ring Mandrel - Gold Standard - bit.ly/GoldRingMandrel Finger Ring Sizer - Gold Standard - bit.ly/RingFingerSizer Ring Stretcher - bit.ly/RingStretcher Ring Bender - bit.ly/PepeRingBender Ring Bender Delrin Bit Holder - bit.ly/RingBenderDelrinBitHolder Smith Little Torch - bit.ly/SmithLittleTorch5Tips Carbide Soldering Pick with Aluminum Handle - bit.ly/CarbideSolderingPick NANO Jeweler's Saw Blades - bit.ly/NANOSawBlades Extra-Wide LED Lamp with USB Port - bit.ly/BenchLampLED Rolling Work Table - bit.ly/RollingWorkTable Foredom Flex Shaft Kit - bit.ly/K2230 Rawhide Mallet - amzn.to/2FtB9Dm Handy Flux - amzn.to/2ZqKHpE Bench Anvil and Pin - amzn.to/33xjQcX Digital Caliper - amzn.to/32gBXUR ________________________________________________ If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that. GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes *Note* Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍 ________________________________________________ Other Ways To Help Support The Channel: My PATREON ➜ patreon.com/GomeowCreations One time support ➜ paypal.me/gomeowcreations ________________________________________________ Instagram ➜ instagram.com/gomeowcreations/ Facebook ➜ facebook.com/GomeowCreations/ ________________________________________________ #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations
Wow!!! Had me scratching my head on this one...how on earth is that going to work! Then like MAGIC, you did it! That is an awesome, amazing trick! Love it!! Thanks for your knowledge.
Omg this is AMAZING!!!! I have got to get some square wire!!! This is exactly what I was wanting for a design I have in mind but had no idea how to achieve it. Your a rock star Randy!! Thank you SO MUCH for sharing!! You just saved me a few thousand brain cells 😄🙏
@@GomeowCreations Oh thats going to be EPIC!! cannot wait!! I LOVE seeing different shapes come together for ring bands. I want to try and do one with two bands and then try to add some curved wire (kind of like filigree but not so intricate) to see if it would work. Kind of like adding "s-clasp" shapes around the inside of the two bands if that makes sense 😄
I just love your videos! Your work is always so nice and clean and your videos so easy to follow and thorough. Thank you so much for sharing your tremendous talent & skill. I’m rather new to metalsmithing, I’m self-taught (although more accurately, I’m “RUclips”taught, which includes you and many others) so thank you 🙏🏼. So, I’m a bit confused as to why you soldered the bars a 2nd time using easy solder (when the rings were still separate) as we had just soldered them, and then cleaned in the pickle. Ive watched the video all the way through multiple times but I’m still unclear as to why we do that step. Any info you can provide would be greatly appreciated. I’ve learned so much from you. Thanks again! Kindly, Andrea
I made a copper cage ring with a piece of pipe that fit my finger and a couple files, rattail and flat. I should've used a drill but I wanted to see if it was possible without electricity first, just for fun.
I’m not sure if I commented before, but I’m a little confused on how to make the larger shaped rings? I know this is a old video but if you can help I would really appreciate it… Thanks Autumn Michelle
Thanks for the math! This sort of art is a big influence for me because I've leaned toward metaphysical crystals since my frontal lobe contusion that took most of my education, so then a book on smithing will be a focus, but simple things like what you just explained that other people haven't even mentioned would be a little confusing being that it hadn't been mentioned yet. I expect this will be a life long learning experience. I want to make tensor coils wire wrap jewelry, fusing the wires or soldering them together, for the infinite loop effect, keeping the crystals clean of bad energy. I wonder, then, if these magnetic wires that are used in the tensor coils as part of the new orgonite styles with sacred geometry that I've become interested in could be used as part of the crystal wire wraps to create the effect without the resins?! Something to think about!
Thank you for this video! Question, at the beginning of your video you show two cage rings; a taller version and the shorter version which you covered in this video. I am assuming the technique for making the taller version is different. Can you share how you made that version? I would be very interested to know! Thank you in advance!
So very useful this video!! I learnt a lot!! Thank you so much. I really would like to know how you make the larger model Do you have a video of that ring aswell?? Thank you in advance for your answer Mieke
Love this video! I want to get some calipers, what size should I get? I am looking and see 4 inch, 6 inch. I will use for rings since this is always hard for me to get exact measurements! I'm getting better, but want to try using calipers. Thanks! Love your lessons!! SO helpful!
@@GomeowCreations I think she's wondering about the other ring with the wider band. I was also wondering whether or not the technique for soldering the longer, inner 'bars' wouldn't be different
So very useful this video!! I have learnt a lot!! Thank you so much. I really would like to know how you make the larger model Do you have a video of that ring aswell?? It's a différent technique I suppose?
@@GomeowCreations You place the square wire down to create the separations in the ring you demonstrated, but what would you use for the Rings with wider separations?
I always learn something new when I watch you videos! Wondering what length caliper are you using? I need a digital one now and thinking to get a 6” length and not sure if it will hinder measuring ability?
I have been watching you for a while now, and really enjoy all the tips. I got my mill set up today and rolled my first wire. Is it normal to get little slivers all over it or have I botched something?
Old comment, I know. It means you have to anneal the wire more and crank the pressure in more gentler increments. Too much force or too hard metal and it will get fractured.
@@timellis9293 I'm glad you figured it out. I had the same thing happen to me and found the answer in a random comment. Good to share our experience and help each other improve.
Thank you very much. I get a lot of comments in different languages that I just use google translate to see what they say so I can help if they have a question 😁👍
@@GomeowCreations I often use google translate to😀thank you to!you really can help?because I am a beginner jeweler..and very want to working with silver...I have good ideas for jewelry...please can you see my page on Instagram, aurum_flash_store Now I making jewelry from exotic wood and stainless steel☺️
better to make 3 rings cut the pieces out of one ring , these cut pieces wil be perfect round same as 2 others ,, and then soter the cutted pieces in bitween the 2 rings ,
@@GomeowCreations i sent someone your way. I couldn't help them with what they wanted. They need a ring electroplated and some stones set before their grandmother passes away.
@@GomeowCreations im assuming we have a ring that is say 1/8 or even 1/4 inch 70 so old school,4 fine cuts its done may not b square like yours but would look the same .its great that there r ppl like u teaching ppl new things not knocking u ,it helps being an entrepaner sorry was never good at spelling.xpect u 2 come back which is fine.y not try it / ill wait
Yeah I get they you can cut out the inside parts from and ring but you would still have to solder a ring together to make the base ring right? I'm not saying you can't do this but it's just that it's not very practical 😅
@@GomeowCreations no no if u take your own ring of and just cut four slits into your ring myb little file to square the edges u have just created theres your new ring let it sink in also .are u ok with the moulding now.like i said get a copper ring try it out
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Here is a list of all the tools I used and if something is missing please let me know:
Steel Ring Mandrel - Gold Standard - bit.ly/GoldRingMandrel
Finger Ring Sizer - Gold Standard - bit.ly/RingFingerSizer
Ring Stretcher - bit.ly/RingStretcher
Ring Bender - bit.ly/PepeRingBender
Ring Bender Delrin Bit Holder - bit.ly/RingBenderDelrinBitHolder
Smith Little Torch - bit.ly/SmithLittleTorch5Tips
Carbide Soldering Pick with Aluminum Handle - bit.ly/CarbideSolderingPick
NANO Jeweler's Saw Blades - bit.ly/NANOSawBlades
Extra-Wide LED Lamp with USB Port - bit.ly/BenchLampLED
Rolling Work Table - bit.ly/RollingWorkTable
Foredom Flex Shaft Kit - bit.ly/K2230
Rawhide Mallet - amzn.to/2FtB9Dm
Handy Flux - amzn.to/2ZqKHpE
Bench Anvil and Pin - amzn.to/33xjQcX
Digital Caliper - amzn.to/32gBXUR
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
GomeowCreations.com/tools-and-materials
GomeowCreations.com/partners-discount-codes
*Note* Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ patreon.com/GomeowCreations
One time support ➜ paypal.me/gomeowcreations
________________________________________________
Instagram ➜ instagram.com/gomeowcreations/
Facebook ➜ facebook.com/GomeowCreations/
________________________________________________
#jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations
where do you get your wire?
Wow!!! Had me scratching my head on this one...how on earth is that going to work! Then like MAGIC, you did it! That is an awesome, amazing trick!
Love it!!
Thanks for your knowledge.
Haha well thank you very much 😁
Thanks for the video! I just made a variation of this ring with a heart on it for my daughter.
I wonder if you can attach the little bars at different angles so it's got a slated look to them.
I thought really nice. Work always clean and neat. Good demos
Love that. I’m trying to work out how you made the one with a larger cap.
I’m going to try this.
Same! I'd love to know how to do the one with a larger gap between.
Omg this is AMAZING!!!! I have got to get some square wire!!! This is exactly what I was wanting for a design I have in mind but had no idea how to achieve it. Your a rock star Randy!! Thank you SO MUCH for sharing!! You just saved me a few thousand brain cells 😄🙏
Lol well thank you 😁 and I'm happy that it helped. I'm going to make an inlay ring like this soon too 😊
@@GomeowCreations Oh thats going to be EPIC!! cannot wait!! I LOVE seeing different shapes come together for ring bands. I want to try and do one with two bands and then try to add some curved wire (kind of like filigree but not so intricate) to see if it would work. Kind of like adding "s-clasp" shapes around the inside of the two bands if that makes sense 😄
I picked up a manual wire mill from amazon to make start making my own. It is a satisfying process
That's a wonderful design btw!! Love it!
Thanks. 😁👍
This was (surprisingly!) unexpectedly, amazing.. will definitely be trying this! Thank you so much! 💓
Well thank you. I saw that there was no good video's about this so I thought I would make one 😁
Thanks! I just made this ring and it turned out great, thanks to your tutorial!
I just love your videos! Your work is always so nice and clean and your videos so easy to follow and thorough. Thank you so much for sharing your tremendous talent & skill. I’m rather new to metalsmithing, I’m self-taught (although more accurately, I’m “RUclips”taught, which includes you and many others) so thank you 🙏🏼. So, I’m a bit confused as to why you soldered the bars a 2nd time using easy solder (when the rings were still separate) as we had just soldered them, and then cleaned in the pickle. Ive watched the video all the way through multiple times but I’m still unclear as to why we do that step. Any info you can provide would be greatly appreciated.
I’ve learned so much from you. Thanks again!
Kindly, Andrea
I'm a gold Smith silver Smith etc your work is very impassive and passionate
Hello teacher, your videos are very good for when with wood inlays? Greetings from Argentina

Wow I like that ring, just need to get me all the tools 🛠
Hello .... I want to know how you cleaned it after welding .... Thanks ❤️
Thanks for sharing , time at the bench is really valuable so any tip that can make us work faster is more than welcome !
😁👍
I made a copper cage ring with a piece of pipe that fit my finger and a couple files, rattail and flat. I should've used a drill but I wanted to see if it was possible without electricity first, just for fun.
I’m not sure if I commented before, but I’m a little confused on how to make the larger shaped rings? I know this is a old video but if you can help I would really appreciate it… Thanks Autumn Michelle
nice, simply and smart work
What's the purpose of wetting the sand paper? Very curious
It cuts down on dust along with heat and it keeps the sandpaper from getting clogged and becoming ineffective.
@@GomeowCreations oh wow that's a great tip. Thank you for sharing
Amazing, love this technique
Excellent vid Randy!!! 👍👍👍
Thanks you
Great video thanks! Are you able to do a video on a wood inlay?
Thanks for the math! This sort of art is a big influence for me because I've leaned toward metaphysical crystals since my frontal lobe contusion that took most of my education, so then a book on smithing will be a focus, but simple things like what you just explained that other people haven't even mentioned would be a little confusing being that it hadn't been mentioned yet. I expect this will be a life long learning experience. I want to make tensor coils wire wrap jewelry, fusing the wires or soldering them together, for the infinite loop effect, keeping the crystals clean of bad energy. I wonder, then, if these magnetic wires that are used in the tensor coils as part of the new orgonite styles with sacred geometry that I've become interested in could be used as part of the crystal wire wraps to create the effect without the resins?! Something to think about!
Love this video, Randy! Thank you. Could you please tell me about your file and where I can get a good set of Jeweler's files on a budget?
I'm looking into a video about that some time soon.
You've inspired me. I appreciate you
Hola maestro muy buenos los videos para cuando uno con incrustaciones en madera.saludos fabian de argentina
Again another great video Thanks for teaching me new techniques all the time.
Thank you for this video!
Question, at the beginning of your video you show two cage rings; a taller version and the shorter version which you covered in this video.
I am assuming the technique for making the taller version is different. Can you share how you made that version? I would be very interested to know! Thank you in advance!
I will make a video about it in the future 👍
@@GomeowCreations already two months... 😆
Yeah, you should see the list of stuff I have to make videos about 😂👍
So very useful this video!!
I learnt a lot!! Thank you so much.
I really would like to know how you make the larger model
Do you have a video of that ring aswell?? Thank you in advance for your answer
Mieke
Fantastic video..thank you 😊
Glad you enjoyed it!
Thanks for sharing
Love this video! I want to get some calipers, what size should I get? I am looking and see 4 inch, 6 inch. I will use for rings since this is always hard for me to get exact measurements! I'm getting better, but want to try using calipers. Thanks! Love your lessons!! SO helpful!
I'm guessing the longer length bars are a completely different technique, is there another video?
What do you mean and how long are you thinking?
@@GomeowCreations I think she's wondering about the other ring with the wider band. I was also wondering whether or not the technique for soldering the longer, inner 'bars' wouldn't be different
So very useful this video!!
I have learnt a lot!! Thank you so much.
I really would like to know how you make the larger model
Do you have a video of that ring aswell?? It's a différent technique I suppose?
Vinette N. I too have the same question on making the wider band. Hopefully there will be a video on that technique.
@@GomeowCreations You place the square wire down to create the separations in the ring you demonstrated, but what would you use for the Rings with wider separations?
what sorcery is this? turned out great!
Lol what do you mean sorcery haha and thanks
Nice instructive content
Thank you for the none fiddley version to start with!!!
Thank you for sharing this, will give it a try!
Could you theoretically use a map gas torch
You can use propane if you wanted to haha
Hell yeah, man. Thanks for sharing.
Loved it. Always exceptional
From where did you purchase silicone fingers? Thanks.
Is there different types of square wire that I could use to make combination rings like Silver/Copper/Silver with the short post's as separation?
I enjoy watching ur videos. You’re a great teacher and you alway demonstrate alternatives, as well as learning techniques. Great job! Beautiful rings!
Thank you 😁
Very good. Thanks.
Osam work done by you 😊👍👍
What Gauge wire are you working with?
16ga square sterling silver
Very nice! Inspires me to get to my bench :)
Thanks and yeah it's a nice and easy project.
This was really useful! TX!
What kind of wire do you use?
16ga silver square wire
@@GomeowCreations do you use that same wire for all of your videos?
For a lot of them
@@GomeowCreations dead-soft, half-hard, full-hard?
That's skilled work brother thank you
Thanks 😁
I love your videos! I did have one reaction though, yikes... so much wasted square wire! 🙈😜🤔
Well I make my own square wire so it's not a problem for me 😅👍
You make it look to easy😂🤣😂 I have to many thumbs and goofed up making a few Ring's 😋
Very nice.
Thanks 😁
Hi , love your videos. Thank you for sharing. What kind of file cut you find to be the more versatile overall ?
Thanks for sharing!!
🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳Nice work all the best 😇😇😇😇😇😇😇😇😇😇😇😇 bro 👍👍👍
Thanks 😁
Perhiasan nya bagus motif nya om
I didn’t understand when you measured and then said some other numbers that weren’t on the screen of the mm gauge. Did I miss something?
awesome.
I always learn something new when I watch you videos! Wondering what length caliper are you using? I need a digital one now and thinking to get a 6” length and not sure if it will hinder measuring ability?
Great work 👍
I have been watching you for a while now, and really enjoy all the tips. I got my mill set up today and rolled my first wire. Is it normal to get little slivers all over it or have I botched something?
Old comment, I know. It means you have to anneal the wire more and crank the pressure in more gentler increments. Too much force or too hard metal and it will get fractured.
@@lifeurge You were spot on. It took me a few tries before I figured out what I was doing wrong.
@@timellis9293 I'm glad you figured it out. I had the same thing happen to me and found the answer in a random comment. Good to share our experience and help each other improve.
Where do you buy your solder???
MrUtsa24 - jewelry supply stores or eBay. Silver solder comes in various grades - hard, medium, easy and extra easy.
Amazing
KING🙏
Haha thanks 😊
Hey Randy, I sent an email to your Gomeow Creations website but haven't heard back, have you checked your emails lately? It's about custom work.
Awesome✨
Thank you 😁👍
cool work sharing tips
Спасибо большое..жаль я не понимаю английский:(
You are very welcome and sorry about that, I only speak English 😅👍
@@GomeowCreations don’t worry!it’s my bad 😅 I like English, somewhen I will learn it)))your works is amazing 😻
Thank you very much. I get a lot of comments in different languages that I just use google translate to see what they say so I can help if they have a question 😁👍
@@GomeowCreations I often use google translate to😀thank you to!you really can help?because I am a beginner jeweler..and very want to working with silver...I have good ideas for jewelry...please can you see my page on Instagram, aurum_flash_store
Now I making jewelry from exotic wood and stainless steel☺️
Güzel
👍👍👍
😁👍
better to make 3 rings cut the pieces out of one ring , these cut pieces wil be perfect round same as 2 others ,, and then soter the cutted pieces in bitween the 2 rings ,
Here's the idea. You can print graph paper from incompetech.com/graphpaper/ .
There are a few amateur moves imo but he is passionate at least
9:35 grrrr angre
You made angry eyes out of the circles and bars didn't you!?
Nooooo....
If you try this with round wire. Be ready to pull your hair out. 🤣
And that is what I used square 😅👍
@@GomeowCreations i sent someone your way. I couldn't help them with what they wanted. They need a ring electroplated and some stones set before their grandmother passes away.
fooooor
Too damn many advertisements!
Lol I need to check that seeing that they are auto placed 😁 and sometimes RUclips like do just put way may
i could make that ring with out any soldering ,just a saw
How?
@@GomeowCreations im assuming we have a ring that is say 1/8 or even 1/4 inch 70 so old school,4 fine cuts its done may not b square like yours but would look the same .its great that there r ppl like u teaching ppl new things not knocking u ,it helps being an entrepaner sorry was never good at spelling.xpect u 2 come back which is fine.y not try it / ill wait
Yeah I get they you can cut out the inside parts from and ring but you would still have to solder a ring together to make the base ring right? I'm not saying you can't do this but it's just that it's not very practical 😅
@@GomeowCreations no no if u take your own ring of and just cut four slits into your ring myb little file to square the edges u have just created theres your new ring let it sink in also .are u ok with the moulding now.like i said get a copper ring try it out
@@GomeowCreations gone silent have we
Si il arrêtait un peu de parler svp.....
Never