2018 - 2024+ Hyundai Kona 5 Channel Amp and Sub Install
HTML-код
- Опубликовано: 6 мар 2024
- Parts linked in the description below!
Watch a full tutorial as a 2022 Hyundai Kona will have a brand new Kenwood 5 channel amplifier and subwoofer installed to the factory audio sound system. This amplifier powers all the interior speakers and a subwoofer in the rear cargo area.
This video applies to Hyundai Kona models for years 2018, 2019, 2020, 2021, 2022, 2023, and 2024. This video also includes amplifier wiring, installation, and testing.
NOTE: This vehicle was NOT equipped with the Harman Kardon (HK) audio system. If you have HK, and are RETAINING OR BYPASSING the factory HK amplifier, you will need a few different harnesses and parts to make your install work.
Click here for the front door speaker install video:
• 2018 - 2024+ Hyundai K...
Click here for the rear door speaker install video:
• 2018 - 2024+ Hyundai K...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate / eBay Partner Paid Links):
*Kenwood X802-5 5 channel amplifier: amzn.to/3tjoj3a
*(optional) Kenwood Bass Knob: amzn.to/3V88EQ3
*Kicker 12" L7T Downfiring Sub Package: amzn.to/4caEu58
*Skar Audio 4 gauge OFC Wiring kit: amzn.to/31f0r2U
*AudioControl LC7i LOC: amzn.to/3zRQXXY
*(optional) AudioControl ACR-1 Bass Knob: a.co/d/dkp7vnu
*Pac LPHHY06 T-Harness Adapter: ebay.us/NDUT1d
*9 Conductor Cable Speaker Wire: amzn.to/3xK4PSk
*2' RCA Cables: amzn.to/49HPl4M
*12x24" ABS Plastic Sheet: amzn.to/3T8Uewt
To replace the radio, here are some recommended parts:
(and if replacing the radio, no LC7i or Pac T harness is needed)
*Radio Recommendations (which is required to have a Single Din OR L-shaped Double Din Chassis)
-Boss 9" Floating: amzn.to/3wRWelv
-Boss 10" Floating: amzn.to/4cgZrLq
(Any floating screen boss will work)
-Alpine iLX-507 7" Double Din: amzn.to/48NlmqV
-Alpine iLX-F509 9" Floating: amzn.to/3QeRzkP
-Alpine iLX-F511 11" Floating: amzn.to/46x5Izy
-Alpine iLX-F409 9" Floating: amzn.to/46MLHVp
-Alpine iLX-F411 11" Floating: amzn.to/3rSs92X
-Sony XAV-AX8100 9" Floating: amzn.to/3jx12Ug
-Sony XAV-AX8500 10" Floating: amzn.to/48PVhax
-Pioneer DMH-C2550NEX 7" Double Din: amzn.to/43eG9SW
-Pioneer DMH-WT3800NEX 9" Floating: amzn.to/3VfKByY
-Pioneer DMH-WT7600NEX 9" Floating: amzn.to/3VezJBe
*Metra 95-7392B Dash Kit: ebay.us/Mr23mK
*Metra 70-7306 Radio Wiring Harness: amzn.to/3Iywm0D
*Axxess ASWC-1 Steering Wheel Control Module: amzn.to/3ilRprp
*Axxess AX-CAM6v 12v to 6v Camera Power Adapter: amzn.to/3TwAGnl
*Metra 40-KI11 Antenna Adapter: amzn.to/3l0B9vq
Disclosure: As an Amazon Associate / eBay Partner I earn from qualifying purchases 
Авто/Мото
Parts used linked in the description of the video!
Have the same link for Bass knob and 12" Sub in the description
Thank you, it has been fixed.@@adrielm1920
@@ProvoBeastAudio Thank you! I was interested in the sub 😁
If you want to splice directly for a 2022 Kona you will need to get behind the radio. Forget about splicing in rear speaker wires, there are many same color wires. It's easier to remove the radio. For the subwoofer you splice into the large Connector in the lower middle into the two top biggest wires that are Yellow and Brown and the two lowest that are gray and orange. Pay attention that the yellow is Rear Left+, brown RearLeft, gray RearRight- and orange Rearright+. This means that the top wire toward you when you hold the plug (yellow) is + but the lowest (grey) is -. Took me some research to be sure and it works great now.
5 Star Audio skills 😉nice job
As much as I dislike Hyundai/kia, they are absolutely perfect for hiding the amplifiers. The Hyundai accent has the most room under the seat out of all of them! Managed to fit an lc2i, distro blocks, a 4 channel and a monoblock there under the drivers seat with room to spare!
Why u dislike hyundai :(?
Why do car audio installers not just remove the front seat when doing an under seat amp? Would it give you more room to work?
Can u hook up subs in a 2020 hyundai tucson without going in the back of the radio. My suv also has the infinity surround
Do you think two speed wires are able to fit under the side panel of A car because I will need it for my amp in the trunk that’s why I was gonna go with the extension that goes with the advanced harness that extends 17 feet it’s smaller and not as thick but also not protected so potential risk of damage.
Have a 2022 n line with the Harmon audio upgrade. Have under the seat 10” with built in amp how would I bipass
I need help PLEASE. I'm trying to upgrade the radio and add a backup cam to my 05 GMC Yukon Denali XL on a VERY SMALL budget. I've bought a CAMECHO 7" Double Din Car Stereo with camera on Amazon for cheap. (Not knowing what I'm doing)... Now i cant figure out which adapter I need to connect with the factory Bose system.
The t harness on pac site says 2022 Kona. Does it work for the 2023 with 10in display, non Harmon system? Thanks for the video. Just the info I was looking for.
Love your videos. Could you post some of the tools you use or ones you suggest. Thanks and great work.
Sure, here you go: www.amazon.com/shop/provobeastaudioinstallation/list/40YYCDEKU027?ref_=aip_sf_list_spv_ofs_mixed_d
@@ProvoBeastAudio Thanks
Hello Provo. I'm thinking about getting this amplifier for my 14 accord. Is the lc7i really going to improve the sound quality or is just a waste of money. I'm running 4 Alpine s2 6.5c by the way. Thanks
Great install there. Dusty engine bay though. How do you remember which speedwire goes to where, please Chris?
Input 8' run of speed wire goes from the male end side of the T harness to the inputs of the line out converter. Output 8' run of speed wire goes from the outputs of the amplifier back to the female end side of the T harness, sending that newly amplified audio to all your speakers.
Nice setup! 👌 How's the sound quality with the new amp and sub? We sent you an email, please take a look.
Seems like an awful lot. That subwoofer was really gettin it