Thanks for the video. Bought a fender eliminator here in Australia, but it came with ZERO instructions. It is very similar to the GIXXERBOYS unit with the built in lights. After watching the video, install, super easy. Again many thanks and keep the videos coming
Yo great video!! Just installed this same kit on my 2016 Gixxer 600 and it makes it look so much better. Your vid helped a lot and it went very smoothly. Cheers 🍻
Tugsan Acaroz , you could do that but the purpose of taking things apart was because the light on my fender eliminator was plug and play. I had to take pieces off to get to the plug. I could of cut the wire and used heat shrink if it wasnt plug and play but then again I hate cutting wires on anything.
Bru...love the gxsr and am new at the riding adventures. Am wondering what is a good year(s) on the gxrs with a better technology and better mechanicals in order to work on the bike? Doing plenty of research but just confusing sometimes.. Anything that you recommend I really appreciated Safe riding Much blessings 🙌 Ty 🏍🏍🏍😎😎😎💪💪💪
Fuck yeah man! Congrats on the new gixxer purchase! The fender eliminator looks tons better now with just the license plate now that I got it. It's a pretty solid fender eliminator and the price is right.
Thanks for making this video and spending your time.. But do you really need to pull all the parts out? why don't you just first take out the fender and cut the cable then use some heat shrink tubing to wire them to new one?
Other than any hardware that came with the eliminator, I think I used the same hardware that came with the fender. It has been a while since I did the install.
I just did this to my 15 750 yesterday and the LED didn't work. I called Will over at Gixxerboys and he was pretty good about it. He said they may have spiced the wires incorrectly for the LED so I have to take it back apart tomorrow and see if that's the case. If not, it's a faulty LED. I would double check to make sure yours works since I didn't see you turn it on to test in the video.
That's unfortunate and sorry to hear. I didn't record the part of testing it due to my battery dying but I did have to take everything apart because my led didn't work either at first. It turned out that I didn't connect it fully. It was a simple mistake to make. One I pushed the connector in all the way and the clip locked in it worked perfectly. So you may want to double check since that was the case with me. Hope things are sorted and thanks for watching.
Thanks for the advice man. I had a buddy stop over while I was 3/4 of the way done with the work and he wanted to help so I had him plug in the connectors while I was mounting the plate so hopefully that's it. Thanks for the video man.
Jareth Geier footage riding it will be up soon as well as more installs. I'm debating on which exhaust to get at the moment m4, two bros or my current choice which is the yoshimura.
thank you for the video ,I'm trying to find this kit online to install on my 2016 gsx r600 but I can not find it ,do you have any suggestions ? thank you
+Tales From The Gixx hey man when you mounted the new fender eliminator to the bike, did the plate go over the cord for the led? I bought the kit but i was wondering about the led cord. It looks like you just mounted right over it?
+Joe D yeah it went over the plate if I remember right and you feed in in the tail through the existing hole and path as the stock fender light harness.
+Tales From The Gixx ive got 40 degree weather comin up so im gonna do it then.. I will let ya know how it works out. Ive watched this vid a few times and worked up the confidence... Just dont wanna run into any snags. Thanks man
Your videos are so helpful. Keep them coming! Prob would have broke so many pieces if i didn't watch this first. Still managed to loose one of those push rivots -_-
+Brad Lee (THATboyBradLEE) Glad I could help you out. I plan to keep making videos like this. You can always order one of those push pivots online for like 2 bucks or less.
Great, very helpful video. Installed tail tidy watching this video had no issues.
Thanks for the video. Bought a fender eliminator here in Australia, but it came with ZERO instructions. It is very similar to the GIXXERBOYS unit with the built in lights. After watching the video, install, super easy. Again many thanks and keep the videos coming
Mr1triton Thanks for watching! I will definitely be making more install videos as time go's on. Glad your install went smoothly.
Yo great video!! Just installed this same kit on my 2016 Gixxer 600 and it makes it look so much better. Your vid helped a lot and it went very smoothly. Cheers 🍻
Tugsan Acaroz , you could do that but the purpose of taking things apart was because the light on my fender eliminator was plug and play. I had to take pieces off to get to the plug. I could of cut the wire and used heat shrink if it wasnt plug and play but then again I hate cutting wires on anything.
Bru...love the gxsr and am new at the riding adventures.
Am wondering what is a good year(s) on the gxrs with a better technology and better mechanicals in order to work on the bike?
Doing plenty of research but just confusing sometimes..
Anything that you recommend I really appreciated
Safe riding
Much blessings 🙌
Ty
🏍🏍🏍😎😎😎💪💪💪
Looks 100x better bro, just picked up my 15' gsxr today. Hoping to do this asap
Fuck yeah man! Congrats on the new gixxer purchase! The fender eliminator looks tons better now with just the license plate now that I got it. It's a pretty solid fender eliminator and the price is right.
Tales From The Gixx thanks man, the price is definitely good. I looked online and some companies are crazy with their prices
Good thorough video, that side panel section will help me with my '15.
+DLY GRND Glad I could help, those panels are tricky and easy to break if your not careful.
I'm about to pick up my 2013 gsxr 750 from the dealer in a couple days, first thing I'm doing is this
Thanks for making this video and spending your time.. But do you really need to pull all the parts out? why don't you just first take out the fender and cut the cable then use some heat shrink tubing to wire them to new one?
Good lookin' out! Just did the install.
Did you know the mounting hardware size?
Other than any hardware that came with the eliminator, I think I used the same hardware that came with the fender. It has been a while since I did the install.
Wow this video is the best!!! You did a great job with the camera showing everything 👍
Nice bro... Lots of work to maintain the original wire hardware. I say cut it, crimp it and call it a day, but that's just me.
Great video man. I needed this!
I just did this to my 15 750 yesterday and the LED didn't work. I called Will over at Gixxerboys and he was pretty good about it. He said they may have spiced the wires incorrectly for the LED so I have to take it back apart tomorrow and see if that's the case. If not, it's a faulty LED. I would double check to make sure yours works since I didn't see you turn it on to test in the video.
That's unfortunate and sorry to hear. I didn't record the part of testing it due to my battery dying but I did have to take everything apart because my led didn't work either at first. It turned out that I didn't connect it fully. It was a simple mistake to make. One I pushed the connector in all the way and the clip locked in it worked perfectly. So you may want to double check since that was the case with me. Hope things are sorted and thanks for watching.
Thanks for the advice man. I had a buddy stop over while I was 3/4 of the way done with the work and he wanted to help so I had him plug in the connectors while I was mounting the plate so hopefully that's it. Thanks for the video man.
Dude hell yeah. Now the exhaust. And some footage of riding it would be nice.
Jareth Geier footage riding it will be up soon as well as more installs. I'm debating on which exhaust to get at the moment m4, two bros or my current choice which is the yoshimura.
The yoshimura would be nice. And the m4 sounds pretty nice as well.
One way to go with the gsxr and that's a yoshi system.
thank you for the video ,I'm trying to find this kit online to install on my 2016 gsx r600 but I can not find it ,do you have any suggestions ? thank you
Thanks for the great vid, im gonna order my kit next week! Sweet bike btw.
+Joe Dee Thanks man, hope the video helped.
+Tales From The Gixx hey man when you mounted the new fender eliminator to the bike, did the plate go over the cord for the led? I bought the kit but i was wondering about the led cord. It looks like you just mounted right over it?
+Joe D yeah it went over the plate if I remember right and you feed in in the tail through the existing hole and path as the stock fender light harness.
+Tales From The Gixx ive got 40 degree weather comin up so im gonna do it then.. I will let ya know how it works out. Ive watched this vid a few times and worked up the confidence... Just dont wanna run into any snags. Thanks man
+Joe D that what I love about cold weather it's a good time to work on the bike. Hope everything goes smoothly. Let me know if you need any help.
Your videos are so helpful. Keep them coming! Prob would have broke so many pieces if i didn't watch this first. Still managed to loose one of those push rivots -_-
+Brad Lee (THATboyBradLEE) Glad I could help you out. I plan to keep making videos like this. You can always order one of those push pivots online for like 2 bucks or less.
you always have great vids, dude. ride safe!
+TheBlackPharoah Thanks buddy!!!! Keep it on two!
Hello Thanks for sharing.
May I ask where I can buy the GSXR Service Manual. Mine is a 2015 750cc with the same color as your 600.
Jay Lopez Thank you, the manual can be purchased here genuinesuzukimanuals.com/
whats the difference of fender eliminator and a under tail hot bodies...is under tail legal ?
Can the wire of the license plate light be left unplug forever?
Noxious Moto don't know if you've done it yet but check it out. Another motovlog gee in south Texas. Maybe I Should just move back to Texas
You should man Texas is pretty awesome for riding, except lately it has just been rain.
If i ever moved back to Texas. I think it would be Austin. Lived in San Antonio for almost 20 yrs.
ibn r. Yeah Austin is super nice. San Antonio is suppose to be awesome too though
Noxious Moto Hey, Its you lol :)
Cant Even Steven haha of course :D
Hey bro i think someone pranked u and shaved your head all guff while u were sleeping .Lol!!
Do you even Mohawk bro? Lol
Tales From The Gixx good sport 👌
Great!
How to install crash pads in this model?
I will be uploading a video on that in a few days. Thanks for watching.
That hair style thoe :D Nice vid :)
Bro what part of Texas are you from
Raul Molina south Texas area near Mexico haha
McAllen??
What type is one or two
Its the basic one that doesnt flip up
Ok thank you can you guys send me the web address so I can buy good stuff from you guys
How much is this bike
Just a Visitor I couldnt give you the price cause dealerships vary on prices. Id say anywhere from 11,000 to 12,000
how tall are u
+ITSTARTEDWITHA SUPERMOTO 5' 4"
You said 2004. This is a 2015
Yes I'm aware, I added a note to the video. I said 2004 mistakingly cause I was thinking of my old gsxr I had before buying this one.
I would paid the extra money for the Yoshimura that one looks ugly
Ugh. I had to pause it to see what it looked like. Spend a little more time showing the end result.
I can’t take you seriously bro with that haircut , I know people are cutting at home now during the shutdown but I think you missed a few on the sides
Gixxer 667 it’s a goth style Mohawk, I don’t know why everyone is so close minded or in the dark with shit
Tales From The Gixx the world isn’t ready for it yet maybe ... or they were and the fad is 25 years too late , I remember it in the 90’s